Академический Документы
Профессиональный Документы
Культура Документы
B H I
A
C
D
E
F
Outstanding performance has made the F-Series
the industry standard for general floodlighting
applications. Reflector flexibility provides smooth
and controlled illumination.
Applications
• General Floodlighting
• Mining Operations
• Drilling Platforms
• Petrochemical Plants
• Refineries
• Port Facilities
• Parking Lots
• Tennis Courts
• Athletic Fields
UltraClad Polyester
Standard finish shall be gray Ultra-Clad polyester powder
coating, 2.5 mil nominal thickness, electrostatically applied
and oven cured.
www.wide-lite.com Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122
F Series
The Life of an F Series Floodlight is measured in Decades...
Encapsulated
Ballast
Superior protection from
moisture and corrosion as well
Sealed Optical as excellent heat
dissipation enables the
Assembly ballast to run cooler than
Tempered glass lens is a typical open core and
permanently sealed to the coil. Almost 50 years of
optical assembly by a lens testing and experience has
frame with an extruded gasket resulted in Wide-Lite’s unique
and secured by stainless steel SilentGuard® method of encapsulating
screws. A gasketed and ballasts. For ease of access, typically
removable socket assembly maintained HID system components
allows re-lamping from below such as capacitors, starting aids and
without disturbing the fixture controls equipment are installed free of
aiming. encapsulation.
Stabilux Socket
An insulated retainer
supports the glass end of
the lamp. This provides
precise photometric alignment within
the reflector and prevents breakage
due to shock and vibraion.
Reflector System
F Series floodlights are provided with multi-faceted segmented optics that
utilize the highest reflective material available – imported “Super Sheet” with
an inorganic dielectric coating. This extra bright material is created with a dual
oxide coating process that results in an extremely uniform sheet providing a
minimum reflectivity of 95%. These optical systems are not only tremendously
efficient, but also provide better lighting control and cooler operation.
Rust-Ban®
A two-part gray epoxy-based coating consisting of a primer and a heavy-build finish
coat. It resists crude oils, gases, alkalies and refined petroleum products. It is not
recommended where acids or other strong oxidizing solutions are present.
Silastic®
A flexible gray coating with excellent release properties. It protects fixtures from
corrosion due to acid concentrations like those that might be found in fertilizer and
chemical plants. Silastic® coating is sprayed on and air-cured after the fixture is
assembled thereby forming a protective membrane.
Wide-Lite • P.O. Box 606 • San Marcos, Texas 78667-0606 • (512) 392-5821 • Fax (512) 753-1122 www.wide-lite.com
F Series Applications & Finishes
tbk
Textured Black
gr
Gray
db
Dark Bronze
Housing shall be constructed of marine grade die-cast positioning or luminaire aiming. A Stabilux ceramic fabric
aluminum alloy with integrally cast heat dissipating fins insulated retainer shall be used to support the glass end
and a built-in aiming device. Standard finish shall be gray of the lamp to provide precise photometric alignment
Ultra-Clad polyester powder coating, 2.5 mil nominal within the reflector and resist breakage due to mechanical
thickness, electrostatically applied and oven cured. shock and vibration.
The reflector shall be composed of individual segments The ballast shall be isolated from the optical assembly
that have not been machine-formed to insure maximum and be arranged on the luminaire as separate but integral
efficiency. components. Core and coil assembly shall be
The optical assembly shall be sealed and Dust-Tite encapsulated in silica-filled polyester epoxy resin to
(constructed to IP65 standards) and shall not have weep assure quiet operation, maximum heat dissipation and
holes, filters or any other route for direct exchange with protection from moisture and corrosion. The capacitor
outside air. The lens assembly shall consist of a minimum (and starting aids where required) shall be located in the
of 7/32" thick tempered glass mounted to a frame and ballast enclosure but not imbedded in the encapsulant
then sealed to the luminaire housing with a continuous to facilitate field maintenance.
extruded gasket and attached to the luminaire housing Luminaire shall be UL 1598 listed as suitable for wet
with multiple stainless steel screws. locations with no special provisions for above horizontal
The lamp shall be accessed from below through a aiming; UL 1598A Marine listing shall be available as an
removable socket assembly that does not require option. Luminaire shall carry a full Seven-Year Warranty
unfastening or disturbing the lens, lens gasket, lens frame against defects in workmanship. Luminaire shall be
manufactured in an ISO 9001 Certified facility.
F Series Luminaires
Ordering Sequence
O 1
www.wide-lite.com 9 0 01 -A 52 BULLETIN NO. 0343-0803