Академический Документы
Профессиональный Документы
Культура Документы
LYTE
THE ULTIMATE OUTDOOR
AREALUMINAIRE
SUPR/I-LYTE fiom
WIDE.LITE:
NEWADVANCED DESIGN
FORTODAYS
PERFORMANCE I{EEI}S
With today's high energy costs, it's
more important than ever to specily
energy efficient systems for area light-
ing designs. The new Supra-Lyte lu-
minaire trom Wide-Lite is the perfect
choice lor parking, roadway, and area
lighling tasks. with no compromise in
appearance eI perf ormance.
FUNCTIONAL SWLING
The Supra-Lyte housing features a
square shape with smooth, rounded
contours and a dark bronze finish to
blend wrth the architectural environ-
ment. To coordinate with other color
The optics are so effective that a 250 illumination with qreater enerqv eff -
schemes, optional black, silver and
white finishes are available. watt HPS lamp can produce the same ciencv than a sinqle 1000 watt
peak rntensrties as a 400 wall HPS luminaire. Dual lamp models are avail-
The contemporary housing is as func- lamp in typical luminaires. able for both HPS and metal halide/
HPS combination and offer the
tional as it is stylish. The square
Substantial energy savings can be advanlage of switching off one amp
shape optimizes the distribution of a
achieved when Supra-Lyte is ordered for lower leve illumination whlle
square Type V pattern with no waste-
with the optional Bi-Level switching retaining the uniform Type V pattern.
ful light overlap. And, unlike most
Type V luminaires, the Supra-Lyte has syslem. Dunng off-peak hours. lumi-
naires can be switched to provide low
no structural arms or supports to de-
level illumination and reduce operat-
NON.METALLIC
tract from its appearance or cast DESIGN
shadows. The ballast is located in an inq costs up to 75%.
inlegral ballast maslf iller assembly Supra'Lyte has an exclusive light-
away from the lamp heat. Thrs design UNIOUE DUAL L/AMP weight non-metallic optical housing. lts
assures cooler operation and longer SUPRA.LYTE construction features heat and impact
life Jor the ballast components, and resistant acrylic with an opaque upper-
easier installation of the lightweight For areas requiring higher light levels, half and crystal clear, UV stabillzed
optical housing. a dual lamp Supra-Lyte is available. non-yellowing lens.
The dual 400 watt HPS (800 watts
Perfect for new construction or retrofit total) Supra-Lvte produces similar GLARE OONTROL
projects, the Supra-Lyte features a
universal fitter for mounting to round Supra-Lyte provides maximum inten-
tapered poles and 5" and 6" square sity between 68 and 70 degrees, and
poles with 4" OD tenons. meets l.E.S. roadway cut-off criteria
for glare control. For "no-trespass"
HIGH EFFICIENCY illumination near adjacent property,
and for perimeter and roadway appli-
Supra-Lyte otfers both initial and life- calions. Supra-Lyte is also available in
cycle cost savings over typical post a roadway version with a house-side
top luminaires. First, onlv one Type V shield and asymmetric distribution.
luminaire, with it's efficient square dis-
tribution pattern, is required per pole.
!
x
FEWER FIXTURES,
FEWER FOLES
The Supra-Lyte optics are engineered
to maximize light at the peak beam
angle. This allows more liqht to be dis- Supra-Lyte pro-
tributed across the surface area rather vides maximum
than near the pole. Supra-Lyte pro- light output at
vides maximum intensity near a cut- 68"-70' to illumi-
otf ol 70', and meets LE.S. roadway nate areas be-
culoff requirements for glare control. tween poles
A small amount of light is provided tt..-- t.'," ' spaced up to 6
near 80'to reach to the next pole and - ---,,.-,- mounting heights.
illuminate people and vehicles from at | Adequate light at
least two sides. The result is smooth, 80" is provided to
uniform illumination without hot spots reduce shadows
near the poles, or excessive glare or by lighting a ob-
jects from at least
shadows.
s_6x __,, , _-.1 two sldes.
( Not lo scate )
Because Supra-Lyte otfers better
controlof light intensity and distri-
bution, it affords an excellent spacing- ing 0.5 footcandles minimum at any level illumination can be used to save
to-mounting-height ratio of 5 to 6 point.250 watt HPS Supra-Lyte lumi- energy when full lighting levels are not
mounting hejghts. That means fewer naires can be used with the same needed. Bi-Level is available as an
poles or lower mounting heights are pole spacinq as typicat +OO watt lumi- option for all Supra-Lyte single lamp
needed to effectively light an area, so naires. This results in an energy sav- luminaires. ln applications such as
visual clutter and overall expenses are ings of $55 per luminaire per year, parking lots, Bi-Level switching can
reduced. based on 10 hour per day operation provide up to a 757o savinqs in enerqv.
and 100 per KWH energy cost. For use over a standard lighting system.
the same application, dual lamp 400
oosTssAvrNGs watt HPS (800 watts total) Supra- Supra-Lyte luminaires with Bi-Level
Supra-Lyte offers exceptional equip- Lytes offer the same pole spacing as Switching provide a slate-of-the-art
menl and energy cost savings com- most 1000 watt posl-top luminaires. integrated lighting system offering con-
pared to typical post top luminaires. Energy savings amount to $70 per lu- trol flexibility and maximum energy
Only one luminaire is required per minaire per year. lt the dual lamp Su- savings. Typically, the cost of a Bi-
pole, and Supra-Lyte's high efficiency pra-Lytes are switched down to one Level system is paid back through
reduces the number of Iuminaires and lamp for 6 hours per evening, energy energy savings within the 5-year Wide-
poles required per application. ln addi- savings would be $160 per luminaire Lite warranty period. Contact the fac-
tion. the unique ballast mastfitter as- per year, compared to the operation ol tory or your local Wide-Lite represen-
sembly saves on pole equipment costs 1000 watt equipment. tative f or additional inlormation,
by reducing pole height requirements including a free energy savings
by approximately 2 feet per pole. BI.LEVEL OONTROL analysis.
Vertical Lamp
Design
*.
SPACING
REOOMMENDATIONS
Table I ILLUN.4INANCE DATA
The folow ng table shows slalistics ior iluminance on a 30 lt. pole. For oiher spacing, pole heighl, or
I
SLIV-400-3 uminaires wth 400 walt metal halide
lamps (40,000 lumens). Each luminaire is mounled
EI .*"'*o 'l
Average
Mnmum
2.6
2.O
2.3
1.0
2.4
.88
1.8
81
1.6
.74
1.5
t5
1.3
.62
12
.45
1.1
.32
10
.25
4H 4F
'o.12
a\
-0.25-
o.25 4.12
$
3H 3H
/V o.7
1.0:
-o.7.
- t.0,
\i
#
2N 2H
'(( 1.5 =
,-, 1.5.
\ 2.Q
1H
,z '3.0
2
]H
s "//
OH
t/, \ u/
t\\ \
1H
2H
\
N /,,
t, /
1H
2N
\
I /.
-..-_J-/
---_J----
.
v
3H 3H
4H 4t]
su su
5H 4H 3H 1H 0H lll 2H 3H 4H 5H 5H 4H 3H 2H lH OH 1H 2H 3H 4H 5H
SLS-4OO-S (400 walt HPS) 25'MH SLS-BOO-S (Two 400 wart HPS) 30'MH
6H 6H
5t-l 5H
a.12
0.r 2,
4H
-0.25. 0.25
Iv ls-
7 il
3H 3H
0- - r .o-
1
{' \ ( 7 \
l ft, 7 \l TI
2H 2N
Ls\
]H
l/r 2A
il\ l1 IH
\5.
2.4 t\\
'/ II (1
r
\ ). /
f ''l \\ )\r \ \' \\ a '1
'/lt
A
OH 0t-l
\ \\ S 'a /// /, N
$ SN 7 N v,
1H 1H
\\
'/7
2N
,/ 2H
\ / \
3H 3H
4H
5H 4U 3H 2H ]H OH ]H 2H 3t-t 4H 5H 5H 4H 3H 2H rH 0H 1H 2r-l 3H 4H 5H
SLS-4OO.A (400 walt HPS) 25'MH SLS-800-A (Two 400 watt HPS) 30'MH
Table lll Conversion lvlultipliers Table lV Conversion Multipliers
tulount ng MoLrnl ng
Heighl LU4OO LU25O M5400,BD MVB250/tl He ght LU4OO LU400rLU250 t\tH400 E
(Feel)
25 I 00 58 80 .41 30 100 79 .68
30 .69 40 55 2A 35 l3 .58 50
35 51 30 .41 21 4A 56 38
40 39 23 .31 16 .35 .30
VERSATILITYFOR
ALLAPPLICATIONS
Supra-Lyte is availab e n a variety of
configurations to match application re-
quirements. Single lamp models, for
parklng 1ot and general area lighting
tasks, are available with symmetrical
(Type V) distribution from 250 or 400
watt HPS and metal halide lamps. For
perimeter and roadway applications,
Supra-Lyte may be ordered with an
asymmetrical reflector system and
house-side shield.
FINISHES
mll ]r l
Standard finish for the Supra-Lyte is
an architectural dark bronze. To blend
with the environment, a choice of
optional black, white and aluminum
finishes are ava labie.
@NFIGURATIONS/
DIMENSIONS
Twin Supra-Lyte
OPTIONS aocEssoRrEs The ballast housing shall be extruded
Factory lnstalled Field lnstalled aluminum connected to the cast alu-
minum mastlitter by lour tie rods for
strength in high winds. Ballast access
! WALL MOUNTING door shall be large enough to tacilitate
BRACKET ease of installation and maintenance
Component Catalog No. SL-SW and, shall be secured to ballast hous-
For mounting Supra-Lyte single or dual ing with safety cable. Ballast shall be
lamp with asymmetric distribution and mounted above capacitor, ignitor and
side mounting arm bracket (Sl\rA) to other electrical components to facili-
walls or other flat mounting surfaces. tate cooler operating temperature and
Mounting hardware not included. prolong component life. Supply wiring
strain reliel shall be provided.
tr FUSED BALLAST
fISIDE MOUNTING
Fuses are KTK 30 amp. tr REFLECTOR
Ordering example: Rellector shall be high purity specular
ARM BRACKET 120V or 277V systems, anodized aluminum to insure maxi-
Component Catalog No. SMA Component Catalog No. F1-KlT mum efficiency. Fixture shall meet IES
For mounting Supra-Lyte luminaires 208V,240V or 480V systems, Compo- delinition of cutotf distribution and be
llush mount to the side ol straight nent Catalog No. F2-K|T capable of providing square type 5
square poles. Arm and ballast housing distribution, or asymmetric distributjon
are aluminum extrusions welded and with house-side shield.
blended together for a one piece look.
ldeally suited for twin mounting at 180" T N SOCKET
either the single or dual lamp Premium glazed porcelain mogul base
luminaires.
Ordering example:
{ socket shall be shrouded with high pu-
rity specular anodized aluminum to
sLS-400-s-277-SMA-DB assure even light distribution. Socket
shall be pulse rated at 4KV.
N BI-LEVEL SWITCHING
BALLAST tr BALLAST
Component Catalog No. BL Ballast shall be prewired high power
Available lor single lamp models only. factor design with 20 degrees start-
For use with Bi-Level switching system N POLE MOUNT ing lor metal halide (-40 degrees lor
conlrols. See Lighting Systems section ADAPTER BRACKET HPS). Coil windings shall be copper.
of the Wide-Lite catalog for full details. Component Catalog No. All parts shall be field replaceable as
Ordering example: SPB-14DI\,42180-DB a unit or as individual componenls.
SLS-4OO-S-277.D8.8L Permits twin mounting of Supra-Lyte
luminaires with side mounting arm
bracket (SMA) to top of round poles. tr MOUNTING
N FNSHES Pole top tenon must be 4" OD and a
Standard mounting shall be post top
Optional lactory acrylic enamel (op- tenon mounting (4" OD pipe tenon
minimum 7" in length.
tical housing) and polyester powder 5%" high) with optional side arm and
coating (ballast housings) are wall mounting avajlable.
available. SUPRA.LYTE
Catalog Component No. SPECIFICATIONS tr FINISHES
BLACK BK Optical housing shall be UV resistant
WHITE W tr HOUSING acrylic. The ballast housing shall have a
SATIN ALUi,4INUM SA The housing shall consist of an optical polyester powder coating. Standard fin-
housing and ballast housing such that ish shall be dark bronze with optional
the heat trom the lamp is isolated from black, white, and aluminum finishes.
the ballast to insure longer component
lile. Luminaire shall be wind tested to
130 mph. All hardware shall be corro- tr LISTINGS
sion resistant. The optical housing Fixture shall be U.L. Listed for wet lo-
shall be thermolormed Plexiglas@ "G" cations including metal halide lamp
acrylic with opaque upper half and rupture test.
crystal clear lower half. Silicone gas-
keted relamp door shall open inward tr USER PROTECTION
on a continuous teflon hinge and Fixture shall carry a published 5-year
shall be secured with two 74 turn limited warranty.
spring loaded fasteners. Optical hous-
ing shall be secured to ballast housing
by means of a cast aluminum support
frame, and 4 recessed setscrews.
SUPRA.LYTE
ORT'ERINGGUIDE
SL s 400 s -277- DB
I
LUMINA]RE VOLTAGE OPTIONS
SEF ES 120,204 ACCESSOBI!S
240,2lT
(s on M) (s oR A)
o
65
240t277 3 5313 06
480 176
Fixture for HPS,I\,4eia Ha ide combination amp 20'F io
Dua amp 800 watt (400 watt T-18 N4etal Ha de,400 wat E-18 HPS)r
DUAL LAI\,4P
sLsiM-800-( )-(4)-DB 120t204 920 8 30,4 78 Begu ating 65
240t277 415361
480 207
Fixtures tor N,4eta Halide Lamos to
2A'F
Srrq p I drp r00 Warr BT F- l7 Fr vp opp Voqu Baro
SLN,4-400-( )-(4)-DB 12Ai2OA 455 'i 4 00,2.30 Begulating 50
240i277 2.00i1.75
480 1.00
Sinq e Lamp 250 Wati BT,E-28 Envelope Moqu Base
sLN.4-250-( )-(4)-DB 12Ot20A 254 2.60,1.50 Begulatlng 50
240i277 1 .30'1 .12
440 065
1 SPECIFY REFLECTOF TYPE FROM DISTF BUT ON GUIDE
2 ALL BALLASTS AFE H GH POWEF FACTOR
3 AT T ME OF CATALOG PR NTING ONLY PI] LLIPS OFFEBS
-!t. Lr\vo ! vF400 T (c-o. r.D Bw w DT t-rr
L
.,,,-- -- --..:\.
+,LEss rHAN oPERATtNG
.-, a- - .
\ OPTIONS Suffix ACCESSORIES Sutfix
(,) (Factory lnstalled) (Field lnstalled)
I i
Side Mounting Arm Bracket SMA Wa I Ny'ounting Bracket SL-SW
\:::-----jrl.,' r'.i:r:"r:,'\:r':, Bi Leve Switching BL Fused Ballast 120 or F1-KIT
Optiona Finishes: 277 voll
(in lieu of DB Dai( Bronze) Fused Ba last 208. 240 F2-KT
S A Black BK or 480 volt
Symmetric Asymmetric White Pole lvlount Adapter SPB-14DN,42180-DB
Distribution Distribution Satin Aluminum SA Bracket
ALUMINUM POLES STEEL FOLES
s"STRAIGHT SQUARE 5'STRAIGHT SQUARE
O sPEcrFrcArroNs
,[
SPECIFICATIONS
N SHAFT
Extruded 6063 alloy aluminum tubing
t] SHAFT
Weldable grade carbon steel structure
and heat-treated to produce a T6 tem- tubing with a uniform wall thickness ol
pered, supplied with an aluminum .120" (11 ga.) or .188 (7 ga.). The pole
4" OD standard pipe tenon 51/z" high. shaft material shall conform to ASTL4-
4-500 Grade B with minimum yield
N ANCHOR BASE strength o146,000 psi or when noted,
Cast from 356 alloy aluminum with T6 TT-70 with a minimum yield strength
temper, fully welded (outside top and of 70.000 psi. Shaft shall be unitor-
inside bottom) to the shaft. The an- mally square in cross-section with flat
chor bolt and nut recesses in the an- sides. small corner radii and excellent
chor base casting shall be flush torsional properties. Supplied with
covered by four tamper resistant alu- 4'' OD standard pipe tenon 5%" high.
minum nut cover discs.
tr ANCHOR BASE
tr HAND HOLES Fabricated lrom a structural quality
hot rolled carbon steel plate that
Peripherally reinforced covered hand
hole centered 18" above the bottom ol meets or exceeds a minimum yield
the standard. Opening is rectangular strength oI 36,000 psi. The anchor
in shape 21/2" x 4" with the major di- base telescopes the pole shape and is
mension along the vertical axis. circumf erentially welded top and bot-
tom. Supplied with two-piece base
cover.
tr ANCHOR BOLTS
lncludes four L-shape anchor bolts
with each bolt furnished with two nuts. ! HAND HOLES
flat washers and one lock washer. Oval reintorced, having a nominal 3"
x 5" inside opening 18" above base.
tr STANDARD FINISHES
f] ANCHOR BOLTS
Duranodic Anodized finishes.
ADB Anodized Dark Bronze lnclude four L-shape bolts, each fur-
ABL Anodized Black nished with two regular hex nuts.
ANA Anodized Natural
tr STANDARD FINISHES
N OPTIONAL FINISHES Thermosetting polyester powder-coat
Painted baked acrylic enamel finish paint.
applied by liquid electrostatic process. DB - Dark Bronze
W-White BL - Black
W - White
Aluminum Pole Ordering lnformation OG - Oyster Gray
For Single/Due.l Lamp Models
MTNG POLE FATED(1) WALL
n OPTIONAL FINISHES
- Prime Painted
AEIGHT CATALOGNO MPH TI]ICKNFSS P
PASS 155 4,0 ADB 100 .188
G - Hot Dipped Galvanized
PASS 205 4,0 ADB 100 .250
90 .250
Steel Pole Ordering lnformation
For Single/Dual Lamp lvlodels
NOTE:
(1) NIPH shown are based on luminaire EPA of 4.90
and luminaire weight of 60 lbs. Consult iactory MTNG POLE RAIED (1) WALL
ior tw n arm and other rnounting requirernenls. HEIGHT CATALOG NO. MPH TI"]ICKNESS
15 Fr. SP-155 4.0 BC DB 100 11 ga.
20 F1. SP 205 4.0 BC DB 100 11 ga.
25 Fl. SP 255 4.0 BC DB 100+ 11 ga.
30 F1. SP 305 4.o-BC-DB 100* 11 ga.
* Minimum Yleld 70.000 PSI
SQUARE POLE ANCHOR (1) N,4PH shown are based on luminaire EPA of 4.90
and luminaire weight ol60lbs. Consult factory
BOLTAND BASE DEIAIL for tw n arm and other mounlinq requirements.
ABCD E
Sze & Bolt Boll Boll Conduit D rnension
C,rcle P o.eclior SrlF Openr1q Heighl
Specilicatjons and drmensions
5" Sq Aluminum 31h" Y!" \ 25" 21/1', 'lOY2' are subjecl lo change
5" Sq. Steel '1" t 36'. 1"
HIGH PERFORIIAI{CE HID LIGHTING ard UGHTING OOIIITROIS
Aktra ll Luminaircs
Wide-Lite's Aktra ll architectural lumi-
o
naires feature the patented AKTRA high
eff iciency cut-off retlector system.
AKTRA provides smooth illumination
with superior control ol spill light lor ar
chitectural, site and building facade
lighting. Available lor 70 to 400 watt HID
lamps, a choice of mounting configura-
tions, and optional Bi-Level Switching.
Bi.Level Switching
Wide-Lite's Bi-Level HID Switching is a
two level lighting control system de-
signed for applications where low level
illumination can be used to save energy
when full lighting levels are not needed.
Bi-Level Switching can provide up to a
75% savings in energy use over a con-
ventional lighting system. ldeallor park-
ing lots, security areas and airports, Bi-
Level is available as an option for most
Wide-Lite luminaires and tloodlights.
! GEI0E cfinplny
P.O. BOX 606 BULLETIN 0378-0890
SAN MARCOS, TEXAS 78666 Printed in U.S.A.
(512) 392-s821, FAX (512) 353-5822 Copyright O 1990