Академический Документы
Профессиональный Документы
Культура Документы
Model #91169
ETL Model #LK-ATR
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANKYOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light kit; We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Table of Contents
Table of Contents ................................................................ 2 Pre-Installation .................................................................... 3
Warranty ............................................................................... 2
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
A
CAUTION: To avoid accidental burning, allow the bulb
and shatter resistant shades to cool completely before WARNING: Changes or modifications to this unit
touching or replacing the shatter resistant shades or £. not expressly approved by the party responsible
bulbs. Ln for compliance could void the user's authority to
A
operate the equipment.
CAUTION: To reduce risk of electrical shock, do not
install this light kit in damp or wet locations. This light WARNING: This product must be installed in
kit is suitable for indoor use only.
,, 4
accordance with the applicable installation code by
�
· a person familiar with the construction and operation
of the product and the hazards involved.
Warranty
The supplier warrants the light kit to be free from defects in workmanship and material present at time of shipment from the factory for two
years after the date of purchase by the original purchaser. The supplier also warrants that all other light kit parts, excluding any glass, to be free
from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the
original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product
is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the
product are your responsibility. Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not
covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting,
pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby
disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted
by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some
states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be
liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise
be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty
supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
lntertek
2
Pre-Installation
TOOLS REQUIRED
Et)
0-
Phillips Electrical Wire Step
screwdriver tape cutter ladder
PACKAGE CONTENTS
<Q-c
HARDWARE INCLUDED
�
BB 5-cc
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation - Ceiling Fan Light Kit
1 Preparing the fan
2 Preparing the light kit
□ Remove the ceiling fan switch cup cover (D) from the ceiling □ Remove the lockwasher (HH) and hex nut (II) from the
fan assembly by removing the three mounting screws (FF). threaded nipple of the light kit fitter assembly (A) and save
□ Remove the center plug (GG) from the switch cup cover (D). them for later use.
□ Insert the black wire and white wire from the light kit
through the center hole of the ceiling fan switch cup cover
(D).
□ Thread the ceiling fan switch cup cover (D) onto the
threaded nipple on the top of the light kit (A).
□ Insert the black wire and white wire through the lockwasher
(HH) and hex nut (II). Tighten them securely.
�--FF
Locate the blue and white wires inside the ceiling fan
switch cup (E) for light connection.
□ Connect the blue wire from the ceiling fan switch cup (E) to
the black wire from the light kit (A).
□ Connect the white wire from the ceiling fan switch cup (E)
to the white wire from the light kit (A) by connecting the
molded plugs together. A
□ Reattach the switch cup cover (D) to the ceiling fan switch
cup (E) and secure with the screws (FF) that were removed
in step 1.
4
Optional Installation - Installing the Light Kit to the Altura Fan
GG&JJ
�(save)
□ Remove the lockwasher (HH) and hex nut (II) from the
threaded nipple of the light kit fitter assembly (A) and save
them for later use.
□ Insert the black wire and the white wire from the light kit
through the center hole of the switch cup (E) one at a time.
□ Slide the ceiling fan switch cup (E) onto the threaded nipple
on the top of the light kit (A).
□ Insert the black wire and white wire through the lockwasher
(HH) and hex nut (II). Tighten them securely.
5 HAMPTONBAY.COM
Please contact 1 �855-HD-HAMPTON for further assistance.
Optional Installation - (continued)
4
KK
Reinstal ling the receiver in the
switch cup
□ Insert the black and white wires (LL) from the light kit (A)
through the center hole of the receiver (NN) one at a time.
□ Insert the receiver (NN) into the switch cup and align the
tabs on the receiver (NN) with the posts inside the switch
cup (E).
□ Attach the receiver (NN) to the switch cup (E) using the
screws (KK saved from step 2). Tighten securely.
□ Attach the white wire from the receiver to the white wire
from the light kit (A).
□ Attach the blue wire from the receiver to the black wire
from the light kit (A).
A
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
□ Remove one screw (UU) from the switch cup adaptor (H).
Loosen but do not remove the other two screws (UU).
□ Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
□ Aligning the "L" shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
□ Install the other screw (UU) that was removed in the first
step. Tighten all three screws (UU) securely.
6
Installation (continued)
B'----- cc
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPT0N for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTON BAY.COM
Retain this manual for future use.