Академический Документы
Профессиональный Документы
Культура Документы
Level 2 Repair
7-1. Disassembly
Disassemble RF cap
※ Caution
1) Displace the temperature chamber of 80℃ ※ Caution
for 10 minute 1) Be careful of scratch.
2) Detach the OCTA using Vaccum jig
※ Caution
1) Disassemble rear case pushing BRAKCET ※ Caution
to outside 1) Be careful of scratch.
2) Be careful of bonding of SUS PLATE
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
※ Caution
※ Caution 1) Be careful of damage to the connectors and
1) Be careful of scratch
coaxial cables.
Disassemble
connector first
※ Caution
※ Caution 1) Be careful of scratch
1) Be careful of scratch 2) Be careful of connector damage and FPCB
damage
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
1.unscrew 1 point
3.Detach FPCB
※ Caution ※ Caution
1) Be careful of connector damage and FPCB 1) Be careful of connector damage and FPCB
damage damage
2.disassemble hook
3.disassemble FPCB
from bracket
1.disassemble volume
key first
※ Caution ※ Caution
1) Be careful of connector and FPCB damage 1) Be careful of connector and FPCB damage
7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
13 1) disassemble motor
※ Caution
1) Be careful of connector and FPCB damage
7-4
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
7-2. Assembly
※ Caution ※ Caution
1) Be careful of FPCB tilt 1) Be careful of FPCB tilt
Assemble blue RF
cable and assemble
into the clip
press FPCB
to attach
Assemble white
RF cable
※ Caution
※ Caution 1) Be careful of TOUCH KEY LED damage
1) Be careful of reverse assembly
2) Be careful of TOUCH KEY LED damage
7-5
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
※ Caution ※ Caution
1) Be careful not to be lifted up of FPCB 1) Check if screw is fully assembled.
※ Caution
※ Caution - press power : 5 ~ 6 kgf/cm2
1) Be careful of FPCB tilt - press time : 4.7 sec
- be careful of damage
7-6
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
OK NG
Check OCTA poron's TILT
※ Caution ※ Caution
1) Be careful of FPCB tilt 1) Be careful of FPCB tilt
assemble hook
PUT following rib
and guide hole
assemble hook assemble connector
PUT following rib and guide hole
Be careful of
damage of pin
assemble module
※ Caution ※ Caution
1) Be careful of connector pin damage 1) Be careful of FPCB tilt
7-7
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
assemble receiver
and attach it
※ Caution
※ Caution
1) Be careful of connector damage and FPCB
1) Be careful of connector damage and FPCB
damage.
damage.
2) Be careful of scratch
15 1) Assemble RF cable
2) PBA SCREW 1 point
there should be no
lift up of cable
screw 1 point
white cable should be
inner side of PCB
cable coming up
white cable is overlapped on cable is outter side of PCB. it will
blue cable be overlapped on spk module too.
※ Caution
1) Be careful of
- cable coming up
- cable is lifted
7-8
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
※ Caution ※ Caution
1) Be careful of scratch 1) Check if connector is fully assembled or not
18 1) OCTA press
※ Caution
- press power : 5 ~ 6 kgf/cm2
- press time : 11.7 sec
- be careful not to damage
7-9
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.