Академический Документы
Профессиональный Документы
Культура Документы
pull out tests conducted on clays reinforced with geogrids encapsulated with coarse material.
http://doi.org/10.1016/j.geotexmem.2014.07.008
Abdi, M. R., & Zandieh, a. R. (2014). Experimental and numerical analysis of large scale
pull out tests conducted on clays reinforced with geogrids encapsulated with coarse material.
http://doi.org/10.1016/j.geotexmem.2014.07.008
geogrid pullout behavior during deformation. Geotextiles and Geomembranes. 19 (8), 483–
507.
geogrid pullout behavior during deformation. Geotextiles and Geomembranes. 19 (8), 483–
507.
Alfaro, M.C., Hayashi, S., Miura, N., Watanabe, K., 1995. Pullout Interaction Mechanism of
Alfaro, M.C., Hayashi, S., Miura, N., Watanabe, K., 1995. Pullout Interaction Mechanism of
Amaya, P. et al. (2006). Case history of liner veneer instability. Geosynthetics International.
13 (1), 36–46.
Amaya, P. et al. (2006). Case history of liner veneer instability. Geosynthetics International.
13 (1), 36–46.
ASTM D6706-01 (2013). Standard Test Method for Measuring Geosynthetic Pullout
ASTM D6706-01 (2013). Standard Test Method for Measuring Geosynthetic Pullout
ASTM D6706-01. Standard Test Method for Measuring Geosynthetic Pullout Resistance in
ASTM D6706-01. Standard Test Method for Measuring Geosynthetic Pullout Resistance in
Bathurst, R. J. & Ezzein, F. M. (2016). Geogrid pullout load–strain behaviour and modelling
Bathurst, R. J. & Ezzein, F. M. (2016). Geogrid pullout load–strain behaviour and modelling
relationship for inextensible grid reinforcements. Soils and Foundations. [Online] 36 (4), 11–
22.
relationship for inextensible grid reinforcements. Soils and Foundations. [Online] 36 (4), 11–
22.
Reinforcement for Enhancing the Stability of the Geomembrane–Soil Interface along the
Slopes of Cover Systems of MSW Landfills. In Geo-Chicago 2016 (GSP 271) (pp. 307–318).
Chicago: ASCE.
Bhowmik, R., Sukumar, R., Datta, M., & Shahu, J. T. (2016). The Use of Geosynthetic
Reinforcement for Enhancing the Stability of the Geomembrane–Soil Interface along the
Slopes of Cover Systems of MSW Landfills. In Geo-Chicago 2016 (GSP 271) (pp. 307–318).
Chicago: ASCE.
Briançon, L. et al. (2011). A new procedure for measuring geosynthetic friction with an
Briançon, L. et al. (2011). A new procedure for measuring geosynthetic friction with an
Carbone, L. et al. (2015). Dry friction behaviour of a geosynthetic interface using inclined
plane and shaking table tests. Geotextiles and Geomembranes. 43 (4), 293–306.
Carbone, L. et al. (2015). Dry friction behaviour of a geosynthetic interface using inclined
plane and shaking table tests. Geotextiles and Geomembranes. 43 (4), 293–306.
Cardile, G., Moraci, N., Calvarano, L.S., 2016. Geogrid pullout behaviour according to the
https://doi.org/10.1680/jgein.15.00042
Cardile, G., Moraci, N., Calvarano, L.S., 2016. Geogrid pullout behaviour according to the
https://doi.org/10.1680/jgein.15.00042
Chareyre, B., Briançon, L., & Villard, P. (2002). Theoretical versus experimental modeling
123. http://doi.org/10.1680/gein.9.0212
Chareyre, B., Briançon, L., & Villard, P. (2002). Theoretical versus experimental modeling
123. http://doi.org/10.1680/gein.9.0212
Chareyre, B., Briançon, L., Villard, P., 2002. Theoretical versus experimental modeling of
https://doi.org/10.1680/gein.9.0212
Chareyre, B., Briançon, L., Villard, P., 2002. Theoretical versus experimental modeling of
https://doi.org/10.1680/gein.9.0212
Datta, M., 2008. Cover systems for high waste dumps - Stability aspects. 12th Int. Conf.
Datta, M., 2008. Cover systems for high waste dumps - Stability aspects. 12th Int. Conf.
https://doi.org/10.1061/(ASCE)GT.1943-5606.0001838
https://doi.org/10.1061/(ASCE)GT.1943-5606.0001838
Hayashi, S., Shahu, J. T., & Watanabe, K. (1999). Changes in Interface Stresses during
Pullout Tests on Geogrid Strip Reinforcement. Geotechnical Testing Journal, 22(1), 32–38.
Hayashi, S., Shahu, J. T., & Watanabe, K. (1999). Changes in Interface Stresses during
Pullout Tests on Geogrid Strip Reinforcement. Geotechnical Testing Journal, 22(1), 32–38.
Hullings, D.E., Sansone, L.J., 1998. Design Concerns and Performance of Geomembrane
Hullings, D.E., Sansone, L.J., 1998. Design Concerns and Performance of Geomembrane
Koerner, R. M. (2005). Designing with Geosynthetics (5th ed.). New Jersey: Pearson Prentice
Hall.
Koerner, R. M. (2005). Designing with Geosynthetics (5th ed.). New Jersey: Pearson Prentice
Hall.
Koerner, R. M., & Hwu, B. (1991). Stability and Tension Considerations Regarding Cover
Koerner, R. M., & Hwu, B. (1991). Stability and Tension Considerations Regarding Cover
Koerner, R. M., & Soong, T.-Y. (2005). Analysis and design of veneer cover soils.
Koerner, R. M., & Wayne, M. H. (1991). Geomembrane anchorage behavior using a large-
Koerner, R. M., & Wayne, M. H. (1991). Geomembrane anchorage behavior using a large-
Koerner, R.M., 2005. Designing with Geosynthetics, 5th ed. Pearson Prentice Hall, New
Jersey.
Koerner, R.M., 2005. Designing with Geosynthetics, 5th ed. Pearson Prentice Hall, New
Jersey.
Koerner, R.M., Wayne, M.H., 1991. Geomembrane anchorage behavior using a large-scale
pullout apparatus.
Koerner, R.M., Wayne, M.H., 1991. Geomembrane anchorage behavior using a large-scale
pullout apparatus.
Lajevardi, S. H., Briançon, L., & Dias, D. (2014). Experimental studies of the geosynthetic
Lajevardi, S. H., Briançon, L., & Dias, D. (2014). Experimental studies of the geosynthetic
Lajevardi, S. H., Dias, D., & Racinais, J. (2013). Analysis of soil-welded steel mesh
reinforcement interface interaction by pull-out tests. Geotextiles and Geomembranes, 40, 48–
57. http://doi.org/10.1016/j.geotexmem.2013.08.002
Lajevardi, S. H., Dias, D., & Racinais, J. (2013). Analysis of soil-welded steel mesh
reinforcement interface interaction by pull-out tests. Geotextiles and Geomembranes, 40, 48–
57. http://doi.org/10.1016/j.geotexmem.2013.08.002
Lajevardi, S. H., Silvani, C., Dias, D., Briançon, L., & Villard, P. (2015). Geosynthetics
Lajevardi, S. H., Silvani, C., Dias, D., Briançon, L., & Villard, P. (2015). Geosynthetics
Lajevardi, S.H., Briançon, L., Dias, D., 2014. Experimental studies of the geosynthetic
Lajevardi, S.H., Briançon, L., Dias, D., 2014. Experimental studies of the geosynthetic
Lajevardi, S.H., Dias, D., Briançon, L., 2015. Experimental studies of the behaviour of
https://doi.org/10.1680/gein.15.00009
Lajevardi, S.H., Dias, D., Briançon, L., 2015. Experimental studies of the behaviour of
https://doi.org/10.1680/gein.15.00009
Moraci, N. & Recalcati, P. (2006). Factors affecting the pullout behaviour of extruded
220–242.
Moraci, N. & Recalcati, P. (2006). Factors affecting the pullout behaviour of extruded
220–242.
Moraci, N., & Recalcati, P. (2006). Factors affecting the pullout behaviour of extruded
220–242. http://doi.org/10.1016/j.geotexmem.2006.03.001
Moraci, N., & Recalcati, P. (2006). Factors affecting the pullout behaviour of extruded
220–242. http://doi.org/10.1016/j.geotexmem.2006.03.001
Moraci, N., Recalcati, P., 2006. Factors affecting the pullout behaviour of extruded geogrids
https://doi.org/10.1016/j.geotexmem.2006.03.001
Moraci, N., Recalcati, P., 2006. Factors affecting the pullout behaviour of extruded geogrids
https://doi.org/10.1016/j.geotexmem.2006.03.001
the new reinforcement system under pull-out conditions. Geotextiles and Geomembranes. 44
(1), 70–80.
the new reinforcement system under pull-out conditions. Geotextiles and Geomembranes. 44
(1), 70–80.
Palmeira, E. M., & Milligan, G. W. E. (1989). Scale and other factors affecting the results of
Palmeira, E. M., & Milligan, G. W. E. (1989). Scale and other factors affecting the results of
1503–1513. http://doi.org/10.1061/(ASCE)GT.1943-5606.0000720.
Patra, S., & Shahu, J. T. (2012). Pasternak Model for Oblique Pullout of Inextensible
1503–1513. http://doi.org/10.1061/(ASCE)GT.1943-5606.0000720.
Patra, S., & Shahu, J. T. (2015). Behaviour of extensible reinforcement resting on non-linear
http://doi.org/10.1680/geot.14.P.233
Patra, S., & Shahu, J. T. (2015). Behaviour of extensible reinforcement resting on non-linear
http://doi.org/10.1680/geot.14.P.233
Patra, S., Shahu, J.T., 2012. Pasternak Model for Oblique Pullout of Inextensible
(ASCE)GT.1943-5606.0000720.
Patra, S., Shahu, J.T., 2012. Pasternak Model for Oblique Pullout of Inextensible
(ASCE)GT.1943-5606.0000720.
Patra, S., Shahu, J.T., 2015. Behaviour of extensible reinforcement resting on non-linear
https://doi.org/10.1680/geot.14.P.233
Patra, S., Shahu, J.T., 2015. Behaviour of extensible reinforcement resting on non-linear
https://doi.org/10.1680/geot.14.P.233
Embedded in Soil.
Embedded in Soil.
Prasad, P. S., & Ramana, G. V. (2016). Imperial smelting furnace (zinc) slag as a structural
http://doi.org/10.1016/j.geotexmem.2016.01.009
Prasad, P. S., & Ramana, G. V. (2016). Imperial smelting furnace (zinc) slag as a structural
http://doi.org/10.1016/j.geotexmem.2016.01.009
Qian, X., Koerner, R. M., & Gray, D. H. (2002). Geotechnical aspects of landfill design and
Qian, X., Koerner, R. M., & Gray, D. H. (2002). Geotechnical aspects of landfill design and
Qian, X., Koerner, R.M., Gray, D.H., 2002. Geotechnical aspects of landfill design and
Qian, X., Koerner, R.M., Gray, D.H., 2002. Geotechnical aspects of landfill design and
REFERENCES
REFERENCES
1440–1448. http://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1440)
1440–1448. http://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1440)
Shahu, J. T., & Hayashi, S. (2009). Analysis of Extensible Reinforcement Subject to Oblique
http://doi.org/10.1061/?ASCE?GT.1943-5606.0000019
Shahu, J. T., & Hayashi, S. (2009). Analysis of Extensible Reinforcement Subject to Oblique
http://doi.org/10.1061/?ASCE?GT.1943-5606.0000019
Shahu, J.T., 2007. Pullout Response of Inextensible Sheet Reinforcement Subject to Oblique
https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1440)
Shahu, J.T., 2007. Pullout Response of Inextensible Sheet Reinforcement Subject to Oblique
https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1440)
Shahu, J.T., Hayashi, S., 2009. Analysis of Extensible Reinforcement Subject to Oblique
GT.1943-5606.0000019
Shahu, J.T., Hayashi, S., 2009. Analysis of Extensible Reinforcement Subject to Oblique
GT.1943-5606.0000019
Shahu, J.T., Yudhbir, 1998. Model tests on sands with different angularity and mineralogy.
Shahu, J.T., Yudhbir, 1998. Model tests on sands with different angularity and mineralogy.
Stark, T. D. & Newman, E. J. (2010). Design of a landfill final cover system. Geosynthetics
Stark, T. D. & Newman, E. J. (2010). Design of a landfill final cover system. Geosynthetics
Sugimoto, M., Alagiyawanna, A. M. N., & Kadoguchi, K. (2001). Influence of rigid and
flexible face on geogrid pullout tests. Geotextiles and Geomembranes, 19(5), 257–277.
http://doi.org/10.1016/S0266-1144(01)00011-5
Sugimoto, M., Alagiyawanna, A. M. N., & Kadoguchi, K. (2001). Influence of rigid and
flexible face on geogrid pullout tests. Geotextiles and Geomembranes, 19(5), 257–277.
http://doi.org/10.1016/S0266-1144(01)00011-5
Sugimoto, M., Alagiyawanna, A.M.N., Kadoguchi, K., 2001. Influence of rigid and flexible
https://doi.org/10.1016/S0266-1144(01)00011-5
Sugimoto, M., Alagiyawanna, A.M.N., Kadoguchi, K., 2001. Influence of rigid and flexible
https://doi.org/10.1016/S0266-1144(01)00011-5
37–50.
37–50.
Villard, P., & Chareyre, B. (2004). Design methods for geosynthetic anchor trenches on the
basis of true scale experiments and discrete element modelling. Canadian Geotechnical
Villard, P., & Chareyre, B. (2004). Design methods for geosynthetic anchor trenches on the
basis of true scale experiments and discrete element modelling. Canadian Geotechnical
Villard, P., Chareyre, B., 2004. Design methods for geosynthetic anchor trenches on the basis
of true scale experiments and discrete element modelling. Can. Geotech. J. 41, 1193–1205.
https://doi.org/10.1139/t04-063
Villard, P., Chareyre, B., 2004. Design methods for geosynthetic anchor trenches on the basis
of true scale experiments and discrete element modelling. Can. Geotech. J. 41, 1193–1205.
https://doi.org/10.1139/t04-063
Wilson-Fahmy, R.F., Koerner, R.., Sansone, L.., 1994. Experimental Behaviour of Polymeric
Wilson-Fahmy, R.F., Koerner, R.., Sansone, L.., 1994. Experimental Behaviour of Polymeric
Xu, Y., Williams, D. J., & Serati, M. (2018). Influence of anchorage angles on pull-out
http://doi.org/10.1680/jgein.18.00022
Xu, Y., Williams, D. J., & Serati, M. (2018). Influence of anchorage angles on pull-out
http://doi.org/10.1680/jgein.18.00022
Xu, Y., Williams, D.J., Serati, M., 2018. Influence of anchorage angles on pull-out resistance
https://doi.org/10.1680/jgein.18.00022
Xu, Y., Williams, D.J., Serati, M., 2018. Influence of anchorage angles on pull-out resistance
https://doi.org/10.1680/jgein.18.00022