Академический Документы
Профессиональный Документы
Культура Документы
Product type and Einar® 614 contains polyglycerol esters of fatty acids made from fatty
description acids and glycerol both of vegetable origin. It is completely free of amines and amides.
* Palsgaard uses internally validated test methods for measuring physical/chemical properties,
which meet common internationally used test methods.
** Shelf life starts from the production date when the product is stored in unbroken packaging.
It should be ensured that the storage conditions specified in the product data sheet are followed.
EINAR® SUSTAINABLE, VEGETABLE BASED ADDITIVES
product profile
Einar® 614
Recommended Polymers:
2/4
Polyolefins (PP, PE)
Dosage The recommended loading level for LDPE blown film is 0.1 - 0.3% and for LLDPE film 0.2 -
0.4%. Testing is always recommended to define the optimum loading level for each application
and composition.
Impact on Low relative humidity or a lamination process can reduce the antifogging and antistatic per-
performance formance. The presence of other functional agents on the surface of the polyolefin can affect
antifogging and antistatic performance. Testing is recommended to adjust the optimal benefits
of properties for final products and applications.
Guidelines for use The product should be incorporated into the polymer matrix via a masterbatch or by direct addi-
tion at the resin manufacturer. The low content of the additive in plastic articles and packaging
makes it difficult to dose directly to plastic articles and packaging.
EINAR® SUSTAINABLE, VEGETABLE BASED ADDITIVES
product profile
Einar® 614
Test results
3/4
in final application
Einar® 614 has fast migration and long lasting antifogging performance
in cast and blown films, injection molding and extrusion applications.
5 min 5 5 5 5 5 5 5 min 5 2 3 5 4
10 min 5 5 5 5 5 5 10 min 5 2 3 5 4
15 min 4 5 5 5 5 5 15 min 5 2 2 5 4
30 min 4 5 5 5 5 5 30 min 5 2 2 5 4
60 min 4 5 5 5 4 5 60 min 5 3 3 5 4
1 day 7 days 1 month 2 months 6 months 18 months 1 day 7 days 1 month 2 months 6 months
performance An opaque layer of small fog droplets Very poor 1 Poor light transmission
A complete layer of large transparent drops Better 3 Poor visibility, lens effect
The results are obtained in 50µ blown LDPE film during cold fog test. Data are obtained at 23°C and 50% relative humidity.
Einar® 601 has shown improved short terms antifogging performance compared with a reference, as analysed up to 6 month
after film sample blowing.
product profile
Einar® 614
Sustainable solutions
4/4
for the polymer industry
Health and Safety The product is identified as non-toxic and is not expected to cause irritation to the skin, eyes or
lungs. Detailed MSDS is available on request.
polymers.palsgaard.com