Академический Документы
Профессиональный Документы
Культура Документы
of Products for
Mechanical Engineering
Metallurgy
of high
standards
Dear Partners,
I am pleased to introduce to you our latest catalogue of Severstal products which was
specially prepared for our customers in mechanical engineering. You can find here both
our standard products and special customer performance products: Severhard, Sever-
weld and Severdom.
We have made our catalogue simple and easy-to-use to enable your easy surfing and
finding the necessary information. In addition to structured product list and technical
characteristics of our products, you will find here recommendations on further steel pro-
cessing including welding, forming and cutting. You can also explore additional capabili-
ties of Severstal Steel Service Center.
We are open to new ideas and ready to discuss any suggestions on expanding our
product line not only to satisfy your demand in high quality steel, but to anticipate it - to
adopt new advanced products.
This new catalogue is sure to make our cooperation more efficient and help to achieve
more together.
Agnes Ritter
Technical Director
AO Severstal Management
Table of contents
Company overview 2
Structural steel 5
Special purpose rolled products for power industry and
27
petrochemical industry
Special purpose rolled products for shipbuilding 39
Duplex steel 49
High strength steel 55
Recommendations on high strength steel processing 65
Services 72
Plants of the Group 76
1
Advantages: leadership, size,
experience
Severstal is a vertically integrated mining and
steel company
Leadership:
• For over 55 years Severstal has been a leading supplier of steel products to mechanical engineering
industry in Russia and CIS countries.
Size:
• Wide product range for mechanical engineering.
• “From-ore-to-part” production chain.
• Comprehensive solutions: supply of finished parts and units for equipment manufacturing.
• End-to-end inspection of production process and product quality at all stages.
• Variety of logistics options, prompt and reliable products delivery (rail road, water, truck
transportation).
• Extensive distribution network in Russia, Ukraine, CIS and Europe.
• Participation in the largest mechanical engineering projects: Vostochny cosmodrome, Prirazlomnaya
ice resistant drilling platform, Arkticheskaya jackup drilling rig,
• Moss CS-50 semi-submersible drilling platform, building a new dock at Far Eastern Plant Zvezda, LNG
storage tank in Portovaya compressor station.
Experience:
• Our products are certified to Russian and international standards.
• Production of tailor-made specific steel grades.
• Unique technical support service for customers.
• Prompt response to customer requests.
• Flexible payment terms.
• Cooperation on a long term agreement basis (secured tonnage of steel products and possibility to
have favourable financial conditions) for a certain time period or for a specific customer project.
2
Wide range of products and
services
Severstal
• High strength rolled products and steels for special applications, including products of special customer performance:
SeverDom, SeverWeld and SeverHard.
• Duplex steel for chemical industry.
• Steels for power industry and petrochemical industry, including those of improved corrosion resistance.
• Steel products for ships and platforms, including cold resistant steels for arctic applications.
• Structural steel products for wide range of applications in mechanical engineering, supplied both as hot rolled and
hot rolled pickled, also with various surface patterns.
SSC Kolpino
• Manufacturing of blanks for machine building.
• Flat steel processing (shot blasting and preservative primer application).
• Plasma cutting and gas cutting.
• Press bending and roll bending of flat products.
• Edge processing, welding and boring of parts.
Severstal Metiz
• Gauged bars with special surface finish.
• Shaped sections.
• Fasteners.
• Wire goods and steel ropes.
SSM Tyazhmash
• Iron powders.
• Alloyed powders.
• Blanks and steel structures for mechanical engineering.
3
Charging bay. BOF steelmaking shop
4
Structural
steel
Alloyed steels 10KhSND, 15KhSND, 09G2-UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Alloyed steels S345,17G1S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Alloyed steels 09G2D, 09G2S, 09G2SD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Alloyed steels 20KhGSA, 30KHGSA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Alloyed steels 20Kh, 40kH, 45kH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Alloyed steels 16G2AF, SRS390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Alloyed steels S235JR, S355J0, S355J2, S355JR, S355J2C, S355K2 . . . . . . . . . . . . . 14
Alloyed steels S355NL, S355J2W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Carbon steels U10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Carbon steels St3sp, 35, 40, 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 18
Carbon steels 08ps, 08Yu, 10, 15ps, 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Carbon steels 50G, 65G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hot rolled checkered plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Hot rolled pickled steel 08ps, 15ps, 20ps, 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5
Structural steel
C Si Mn P S Cr Ni Cu V As Al Nb Ti Mo
* 1. N weight percent in steel without ladle treatment shall not exceed 0.008%, with ladle treatment - not more than 0.010%.
2. N weight percent in non-N-alloyed steel may exceed 0.012% if N weight percent does not exceed nitrogen equivalent value (Nequiv.)
Mechanical properties**
Standard Thickness, Yield Tensile Elongation
mm strength strength min, %
min, МPа min, МPа
** – 1 to 15 supply categories depending on specified characteristics of mechanical properties at impact bending tests.
6
Range of dimensions***, mm
Thickness Width
10KhSND 900 950 1250 1400 1500 1800 2500 2550 3500 3800
2.01-3.49
3.50-3.90
4.00-6.00
6.01-7.99
8.00-9.99
10.00-16.00
16.10-50.00
50.10-200.0
Thickness Width
15KhSND 900 950 1250 1400 1500 1800 2500 2550 3500 3800
8.00-9.90
10.00-15.90
16.00-50.00
50.10-150.00
Thickness Width
09G2-UK 900 950 1250 1400 1500 1800 2500 2550 3500 3800
8.00-9.90
10.00-50.00
*** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 1.500 to 14.000 mm in length may be produced upon request.
7
Structural
Судосталиsteel
C Si Mn P S Cu Cr Ni Nb V Al
S345 0.15 0.80 1.30-1.70 0.030 0.025 0.300 0.300 0.300 0.06 0.080 0.015-0.06
17G1S 0.14-0.20 0.40-0.60 1.00-1.40 0.030 0.035 0.300 0.300 0.300 - 0.120 0.050
Mechanical properties
Thickness, Yield Tensile Elongation
Impact toughness, J/cm2, min
mm strength strength min, %
min, MPa max, MPa KCU KCV
-40 -70 0 -20
4.00-16.00 345 490 39 - - -
8.00-10.00 345 490 39 34 * -
10.10-20.00 325 470 34 29 * 34
S345 20.10-40.00 305 460 21 34 29 * 34
40.00-60.00 285 450 34 29 * 34
60.10-80.00 275 440 34 29 * 34
80.10-160.00 265 430 34 29 * 34
17G1S 4.00-9.99 355 490 21 - - - -
10.00-12.00 345 490 23 39 - - -
12.01-50.00 345 490 23 29 - - -
50.10-100.00 345 490 23 - - - -
* – properties are non specified, but checked and recorded into a quality certificate.
8
Range of dimensions**, mm
Thickness Width
S345 900 1100 1500 1600 1700 1800 2500 2550 3000 4400
4.00-6.00
6.01-7.99
8.00-10.00
10.10-160.00
160.10-291.00
Thickness Width
17G1S 900 1100 1500 1600 1700 1800 2500 2550 3000 4400
4.00-4.99
5.00-6.99
7.00-10.00
10.10-30.00
30.10-50.00
50.10-100.00
** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 1.500 to 16.000 mm in length may be produced upon request.
9
Structural
Судосталиsteel
Mechanical properties
Strength Yield strength Tensile strength Elongation min, %
class min, MPa min, MPa
09G2D 295 305 440 21
345 345 490
09G2S 265 265 430 21
295 295 430
325 325 470
345 345 490
355 355 490
09G2SD 265 265 430 21
295 295 430
315 315 450
325 325 450
345 345 490
375 375 510
Range of dimensions*, mm
Thickness Width
09G2D 900 1200 1300 1400 1600 1700 1800 1850 2530 4500
4.00-6.00
6.01-6.99
7.00-12.00
12.10-50.00
Thickness Width
09G2S 900 1200 1300 1400 1600 1700 1800 1850 2530 4500
1.80-2.99
3.00-3.99
4.00-6.00
6.01-6.99
7.00-9.99
10.00-160.00
160.10-291.00
Thickness Width
09G2SD 900 1200 1300 1400 1600 1700 1800 1850 2530 4500
4.00-6.00
6.01-6.99
7.00-12.0
12.1-50.0
* – Dimensions for 6.000 mm plates. Plates of 1.800 to 16.000 mm in length may be produced upon request.
10
Structural steel
Mechanical properties
Thickness, Yield Tensile Elongation** Hardness
mm strength strength, min, % НВ
min, МPа MPa
20KhGSA 5.00-10.00 * * * -
30KhGSA 5.00-60.00 - 490-740 16 (δ10), 20 (δ5) 156-217
60.10-150.0 - - - -
* – properties are non specified, but checked and recorded into a quality certificate.
** – standard requirements to gage length for elongation determination are specified in brackets.
Range of dimensions***, mm
Thickness Width
20KhGSA 1000 1100 1200 1300 1400 1500 1600 2000 2500 3000
5.00-10.00
Thickness Width
30KhGSA 1000 1100 1200 1300 1400 1500 1600 2000 2500 3000
5.00-9.90
10.00-13.90
14.00-20.00
20.10-150.00
*** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 2.000 to 12.000 mm in length may be produced upon request.
11
Structural
Судосталиsteel
Rolled products comply with GOST 4543-2016, at that, mechanical properties are non specified, but checked and recorded into a quality
certificate.
C Si Mn Cr
20Kh 0.17-0.23 0.17-0.37 0.50-0.80 0.70-1.00
40Kh 0.36-0.44 0.17-0.37 0.50-0.80 0.80-1.10
45Kh 0.41-0.49 0.17-0.37 0.50-0.80 0.80-1.10
Range of dimensions*, mm
Thickness Width
20Kh 950 1150 1300 1500 2000 2250 2500 2750 3000 3500
8.00-9.90
10.00-11.90
12.00-160.00
Thickness Width
40Kh 950 1150 1300 1500 2000 2250 2500 2750 3000 3500
2.50-5.00
10.00-11.90
12.00-160.00
Thickness Width
45Kh 950 1150 1300 1500 2000 2250 2500 2750 3000 3500
14.00-50.00
* – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 2.000 to 14.000 mm in length may be produced upon request.
12
Structural
Судосталиsteel
C Mn Si P S Cr Nb Cu Ni мах V
16G2AF 0.14-0.20 1.3-1.7 0.3-0.6 0.030 0.035 0.4 - 0.3 0.3 0.08-0.14
SRS390 0.16 1.90 0.15-0.45 0.020 0.010 0.3 0.1 0.3 - 0.15
Mechanical properties
Standard Thickness, Yield Tensile Elongation Hardness Impact
mm strength strength min, % max, HB toughness KCU
MPa min, MPa at -40°С min, J/cm2
Range of dimensions*, mm
Thickness Width
16G2AF 900 1100 1400 1500 1600 1700 1800 2500 3500 4500
8.00-8.90
9.00-9.90
10.00-50.00
Thickness Width
SRS390 900 1100 1400 1500 1600 1700 1800 2500 3500 4500
4.00-6.00
6.01-7.99
8.00-16.00
16.01-50.00
50.01-70.00
* – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 2.000 to 14.000 mm in length may be produced upon request.
13
Structural
Судосталиsteel
Mechanical properties
Thickness, Yield strength Tensile strength, Elongation
mm min, MPa MPa min, %
0.80-0.99 235 - 15
1.00-1.50 235 340-510 16
1.51-2.00 235 360-510 17
2.01-2.50 235 360-510 18
2.51-2.99 235 360-510 19
3.00-16.0 235 360-510 24
S235JR 16.1-40.0 225 360-510 24
40.1-63.0 215 360-510 23
63.1-80.0 215 360-510 22
80.1-100.0 215 360-510 22
100.1-150.0 195 350-500 22
150.1-160.0 185 340-490 21
2.00-2.50 355 510-680 15
2.51-2.99 355 510-680 16
3.0-16.0 355 470-630 20
16.1-40.0 345 470-630 20
S355J0, S355J2,
40.1-63.0 335 470-630 19
S355JR, S355J2C,
S355К2 63.1-80.0 325 470-630 18
80.1-100.0 315 470-630 18
100.1-150.0 295 450-600 18
150.1-160.0 285 450-600 17
14
Range of dimensions*, mm
Thickness Width
S235JR 900 1200 1300 1400 1500 1600 1700 1800 2550 4400
0.80-1.49
1.50-2.49
2.50-3.99
4.00-4.99
5.00-5.99
6.00-6.99
7.00-10.0
10.00-16.00
16.00-160.0
Thickness Width
S355J0, S355J2, 900 1200 1300 1400 1500 1600 1700 1800 2550 4500
S355JR
2.00-2.49
2.50-2.99
3.00-3.99
4.50-5.99
6.00-7.99
8.00-9.99
10.00-16.0
16.00-160.0
Thickness Width
S355J2С 900 1200 1300 1400 1500 1600 1700 1800 2550 4500
8.00-9.99
10.00-16.00
16.00-160.00
Thickness Width
S355K2 900 1200 1300 1400 1500 1600 1700 1800 2550 4500
8.00-8.90
9.00-9.90
10.00-50.00
* – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 1.500 to 18.000 mm in length may be produced upon request.
15
Structural
Судосталиsteel
C Si Mn P S N Cu Cr Ni Nb V Al min Ti Mo
S355NL 0.18 0.50 0.90-1.65 0.025 0.020 0.015 0.55 0.30 0.300 0.05 0.12 0.02 0.05 0.10
S355J2W 0.16 0.50 0.50-1.50 0.030 0.030 0.009 0.025-0.55 0.40-0.80 0.009 - - - - -
Mechanical properties
Range of dimensions*, mm
Thickness Width
S355NL 900 1350 1500 1600 1700 1800 2000 2200 2550 4500
16.10-130.00
Thickness Width
S355J2W 900 1350 1500 1600 1700 1800 2000 2200 2550 4500
7.00-7.90
8.00-8.90
9.00-9.90
10.00-50.00
* – Dimensions for plates of 6.000 mm in length. Plates of 1.500 to 18.000 mm in length may be produced upon request.
16
Structural steel
C Si Mn Cr Ni Al
U10 0.95-1.09 0.17-0.33 0.17-0.33 0.20-0.40 0.50 0.01-0.03
Mechanical properties*
Required properties
max
Decarburized layer thickness per side
0.40
(ferrite+transient zone), mm
Range of dimensions**, mm
Thickness Width
U10 950 1000 1100 1200 1300 1400 1500 1600 1700 1800
10.0-13.0
** – Dimensions for plates of 6.000 mm in length. Plates up to 12.000 mm in length may be produced upon request.
17
Structural
Судосталиsteel
C Si Mn P S Cr Ni Cu
St3sp 0.14-0.22 0.15-0.30 0.40-0.65 0.04 0.05 - - -
35 0.32-0.40 0.17-0.37 0.50-0.80 0.030 0.035 0.25 0.30 0.30
40 0.37-0.45 0.17-0.37 0.50-0.80 0.030 0.035 0.25 0.30 0.30
45 0.42-0.50 0.17-0.37 0.50-0.80 0.030 0.035 0.25 0.30 0.30
Mechanical properties
Thickness, Yield Tensile Elongation
mm strength strength min, %
min, МPа min, MPa
1.20-2.00 - 370-530 20
2.00-3.99 - 370-530 22
4.00-20.00 245 370-480 26
St3sp
20.10-40.00 235 370-580 25
40.10-100.00 225 370-480 23
100.01-160.00 205 370-480 23
2.00-100.00 * 520 21
35
100.10-200.00 - - -
2.00 - 490-720 12
40 2.10-3.99 - 490-720 13
4.00-50.00 * 560 20
2.00 * 490-720 12
2.10-3.90 * 490-720 13
45 4.00-50.00 * 590 18
12.00-99.90 * 580-770 15
100.00-160.00 * 560-750 13
* – properties are non specified, but checked and recorded into a quality certificate.
18
Range of dimensions**, mm
Thickness Width
St3sp 900 1200 1300 1400 1500 1700 1900 2530 4000 4450
1.20-1.39
1.40-2.50
2.51-7.99
8.00-9.99
10.00-160.00
160.10-308.00
Thickness Width
35 900 1200 1300 1400 1500 1700 1900 2530 4000 4450
2.00-3.00
3.10-5.99
6.00-7.99
8.00-12.00
12.10-100.00
100.10-200.00
Thickness Width
40 900 1200 1300 1400 1500 1700 1900 2530 4000 4450
2.00-2.50
2.60-3.50
3.60-5.90
6.00-7.90
8.00-50.00
Thickness Width
45 900 1200 1300 1400 1500 1700 1900 2530 4000 4450
2.00-2.50
2.60-3.50
3.60-5.90
6.00-7.90
8.00-12.0
12.10-160.0
160.10-220.0
** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 1.500 to 15.000 mm in length may be produced upon request.
19
Structural
Судосталиsteel
C Mn Si P S Cr Cu Ni
08ps 0.05-0.11 0.35-0.65 0.05-0.17 0.030 0.035 0.100 0.300 0.300
08Yu 0.07 0.35 0.03 0.020 0.025 - - -
10 0.07-0.14 0.35-0.65 0.17-0.37 0.030 0.035 0.150
15ps 0.12-0.19 0.35-0.65 0.05-0.17 0.030 0.035 0.250 0.300 0.300
20 0.17-0.24 0.35-0.65 0.17-0.37 0.030 0.035 0.250
Mechanical properties
Thickness, Yield Tensile strength Elongation
mm strength min, MPa min, %
min, МPа
1.20-2.00 * 270-410 24
08ps 2.01-3.90 * 270-410 26
4.00-12.00 * 310 32
08Yu 4.00-8.00 * 310 34
2.00 * 270-410 24
10 2.01-3.90 * 270-410 26
4.00-80.00 * 330 32
1.50-2.00 - 310-440 23
15ps 2.10-3.90 - 310-440 25
4.00-50.00 * 370 30
1.50-2.00 - 350-570 22
2.10-3.90 - 350-500 23
20 4.00-80.00 * 410 28
80.10-99.90 230 400-550 25
100.00-160.00 210 380-520 23
* – properties are non specified, but checked and recorded into a quality certificate.
20
Range of dimensions**, mm
Thickness Width
08ps 950 1200 1400 1500 1600 1700 1800 2530 3300 4600
1.20-1.49
1.50-3.99
4.00-4.99
5.00-12.00
Thickness Width
08Yu 950 1200 1400 1500 1600 1700 1800 2530 3300 4600
4.00-4.99
5.00-8.00
Thickness Width
10 950 1200 1400 1500 1600 1700 1800 2530 3300 4600
2.00-2.90
3.00-3.90
4.00-7.99
8.00-12.00
12.01-15.99
16.00-160.00
Thickness Width
15ps 950 1200 1400 1500 1600 1700 1800 2530 3300 4600
1.50-2.99
3.00-3.99
4.00-4.99
5.00-5.99
6.00-7.99
8.00-12.00
12.10-50.00
Thickness Width
20 950 1200 1400 1500 1600 1700 1800 2530 3300 4600
1.50-1.90
2.00-3.00
3.10-3.90
4.00-4.49
4.50-5.99
6.00-7.99
8.00-9.99
10.00-12.00
12.00-160.00
** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 1.500 to 14.000 mm in length may be produced upon request.
21
Structural
Судосталиsteel
C Si Mn P max S Cr Ni Cu
50G 0.48-0.56 0.17-0.37 0.70-1.00 0.030 0.035 0.030 0.300 0.300
65G 0.62-0.70 0.17-0.37 0.90-1.20 0.035 0.035 0.250 0.250 0.200
Mechanical properties
Thickness, Product Product Yield Tensile Elongation
mm hardness hardness strength strength min, %
max, HB max, HRB min, МPа min, МPа
** – properties are non specified, but checked and recorded into a quality certificate.
Range of dimensions***, mm
Thickness Width
50G 1000 1100 1200 1300 1400 1500 1600 1800 2500 2550
8.00-8.90
9.00-9.90
10.00-40.00
Thickness Width
65G 1000 1100 1200 1300 1400 1500 1600 1800 2500 2550
3.00-7.99
8.00-8.90
9.00-9.90
10.00-40.00
*** – Dimensions for plates of 4.000 to 6.000 mm in length. Plates of 2.000 to 12.000 mm in length may be produced upon request.
22
Structural
Судосталиsteel
Range of dimensions*, mm
Thickness Width
09G2S 900 1000 1200 1300 1400 1500 1550 1650 1800 1850
2.50-2.99
3.00-5.99
6.00-16.00
Thickness Width
S235JR, S275JR, 900 1000 1200 1300 1400 1500 1550 1650 1800 1850
S355JR, St0, 2.50-2.99
St1sp, St1ps, 3.00-3.99
St2sp, St2ps,
St3sp, St3ps, 20 4.00-5.00
5.01-5.99
6.00-16.00
* – Dimensions for plates of 2.000 to 6.000 mm in length. Plates of 1.500 to 12.000 mm in length may be produced upon request.
23
Structural steel
C Si Mn P S Cr Ni Cu
Mechanical properties*
Thickness, Tensile Elongation*
mm strength, min, %
MPa
* – standard requirements to gage length for elongation determination are specified in brackets.
24
Range of dimensions**, mm
Thickness Width
08ps 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
1.50-1.99
2.00-2.99
3.00-6.00
Thickness Width
15ps 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
1.50-2.59
2.60-2.99
3.00-6.00
Thickness Width
20ps 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
1.50-1.59
1.60-1.99
2.00-2.29
2.30-6.00
Thickness Width
20 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
1.50-2.59
2.60-2.99
3.00-6.00
** – strip dimensions are specified; slitting or cutting-to-length may be performed upon request.
25
Mill 2800. Hot Strip Mill 1
26
Special purpose
rolled products for
power industry and
petrochemical industry
Steel plates for boilers and pressure vessels
09G2S, 12Kh1MF, 12KhM, 20K, 22K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
27
Special purpose rolled products for power industry and petrochemical industry
Mechanical properties*
Thickness, Yield Ultimate Elongation, Impact toughness KCU, J/cm2, min
mm strength, tensile %, min after strain
N/mm2, strength, +20°С -40°С -70°С ageing, +20°C
min N/mm2, min
09G2S 4.00-4.99 345 490 - - - -
5.00-10.00 345 490 64 39 34 29
10.10-20.00 325 470 21 59 34 29
20.10-32.00 305 460
32.10-60.00 285 450
60.10-80.00 275 440
80.10-160.00 265 430
12Kh1MF 4.00-5.00 - - - -
295 440-590 21
5.10-40.00 79 - - -
12KhM 4.00-5.00 245 430-550 22 - - - -
5.10-50.00 245 430-550 22 59 - - -
51.00-80.00 235 at least 430 20 49 - - -
20K 4.00-5.00 245 25 - - - -
5.10-20.00 245 25 59 - - 29
400-510
21.00-40.00 235 24 54 - - 24
41.00-60.00 225 23 49 - - 24
22K 25.00-60.00 265 - - 29
430-590 22 59
61.00-70.00 255 - - 29
28
Range of dimensions**, mm
Thickness Width
09G2S 950 1200 1500 1600 1800 2000 2500 3000 3500 4500
4.00-6.90
6.10-7.90
8.00-9.90
10.00-16.00
16.10-160.00
Thickness Width
12Kh1MF 950 1200 1500 1600 1800 2000 2500 3000 3500 4500
4.00-5.00
5.10-7.90
8.00-9.90
10.00-12.00
12.10-40.0
Thickness Width
12KhM 950 1200 1500 1600 1800 2000 2500 3000 3500 4500
4.00-6.00
6.10-7.90
8.00-9.90
10.00-14.00
14.10-80.00
Thickness Width
20K 950 1200 1500 1600 1800 2000 2500 3000 3500 4500
4.00-4.90
5.10-6.90
7.00-7.90
8.00-9.90
10.00-12.00
12.10-50.00
50.10-60.00
Thickness Width
22K 950 1200 1500 1800 2000 2500 3000 3500 4000 4500
25.00-70.00
** – Dimensions for plates of 4.000 to 10.000 mm in length. Plates up to 14.000 mm in length may be produced upon request.
29
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P Cr Cu Ni
22K 0.19-0.26 0.20-0.40 0.75-1.00 0.025 0.025 0.40 0.30 0.30
Mechanical properties
Temperature, Yield Ultimate Elongation, Reduction Impact Impact Hardness
°С strength, tensile %, min of area, toughness toughness НВ
N/mm2, strength, %, min KCV after
min N/mm2 strain
ageing,
J/cm2
KP215 +20 215-500 430-620 20 - 69 -
+270 195 355 18 29 -
+350 185 355 18 29 -
KP250 45
+20 250 435-640 20 - 69 135-207
+270 230 390 18 29 -
+350 220 380 18 29 -
Range of dimensions*, mm
Thickness Width
22K
1300 1500 1750 2000 2250 2500 2750 3000 3250 3500
20.00-120.00
30
Special purpose rolled products for power industry and petrochemical industry
C Si Mn Ni Mo Cr Cu S P
16GNMA 0.13-0.18 0.17-0.37 0.8-1.10 1.0-1.3 0.4-0.55 0.3 0.2 0.02 0.02
Mechanical properties
Thickness, Tem- Yield Ultimate Elonga- Reduction KCU KCU KCU Hardness Bend-
mm pera- strength, tensile tion %, of area %, impact impact impact НВ, ing at
ture, °C N/mm2, strength, min min toughness toughness toughness not to 180°
min N/mm2, after strain +20°С -40°С exceed
min ageing, J/cm2, J/cm2,
J/cm2, min min min
Range of dimensions*, mm
Thickness Width
16GNMA 1500 1750 2000 2250 2500 2750 3000 3250 3500 4000
20.00-115.00
125
31
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P Cr Ni Mo Cu
Class 2 18.0-40.0 0.24 0.15-0.50 0.70-1.35 0.025 0.025 0.25 0.25 0.08 0.35
40.1-90.0 0.24 0.15-0.50 1.00-1.60 0.025 0.025 0.25 0.25 0.08 0.35
Mechanical properties
Thickness, Yield Ultimate Elongation,
mm strength tensile strength, %, max
MPa, МPа
min
Class 2 18.00-65.00 415 550-690
22
65.10-90.00 380 515-655
Range of dimensions*, mm
Thickness Width
Class 2 1300 1500 1750 2000 2250 2500 2750 3000 3250 3500
18.00-90.00
32
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P Cr Ni Cu
09G2SA-A 0.12 0.07 1.70 0.005 0.010 0.25 0.30 0.25
Mechanical properties
Range of dimensions*, mm
Thickness Width
09G2SA-A 1300 1500 1700 1900 2000 2100 2200 2300 2400 2500
10.00-40.00
* – Dimensions for plates of 4.000 to 10.000 mm in length. Plates up to 12.000 mm in length may be produced upon request.
33
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P V Nb Al Ti N
10G2FBYu 0.08-0.13 0.15-0.35 1.6-1.8 0.010 0.020 0.05-0.12 0.02-0.06 0.02-0.05 0.01-0.035 0.012
Mechanical properties*
Yield Ultimate Elongation, Impact toughness,
strength, tensile %, min J/cm2
N/mm², strength,
min N/mm2 KCV -20°С KCU -60°С
* – steel plates with guaranteed mechanical properties after heat treatment may be supplied.
Range of dimensions**, mm
Thickness Width
10G2FBYu 1200 1400 1800 2200 2600 3000 3400 3800 4200 4600
10.00-90.00
34
Special purpose rolled products for power industry and petrochemical industry
09G2S 0.08-0.12 0.5-0.7 1.4-1.7 0.010 0.018 0.08 0.05 0.02-0.05 0.03 0.008 0.03 0.03
Mechanical properties*
Plate Yield Ultimate Elongation, Reduction Impact Hardness,
thickness, strength, tensile % of area, toughness НВ
mm N/mm2 strength, % KCV -60°С,
N/mm2 J/cm2
min
09G2S 45-60 285-420 480 22 45 50 196
61-80 275-445
81-120 265-435
* – when testing KCV impact toughness at -60°С, reduction of impact toughness to 35.0 J/cm2 is allowed for one specimen.
Range of dimensions**, mm
Thickness Width
09G2S 1200 1400 1800 2200 2600 3000 3400 3800 4200 4600
45.00-120.00
35
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P Cr Ni Cu N Al V
13KhFA 0.13 0.17-0.40 0.70 0.005 0.015 0.50-1.0 0.30 0.30 0.008 0.02-0.05 0.04-0.10
09GSF 0.13 0.70 0.60 0.005 0.015 0.30 0.30 0.30 0.008 0.02-0.04 0.06-0.12
Mechanical properties
Yield Ultimate Elongation, Hardness Impact Shear area fraction
strength, tensile %, min max, HRB toughness, at impact test
N/mm2 strength, KCV -50°С specimen
N/mm2, min min, J/cm2 KCV -50°С min, %
* – upon customer request – resistance to sulphide corrosion cracking on DKB specimens. Kissc coefficient
Range of dimensions**, mm
Thickness Width
13KhFA 900 950 1200 1500 1600 1800 2000 2300 2500 2550
5.00-9.90
10.00-12.00
12.10-32.00
32.10-50.00
Thickness Width
09GSF 900 950 1200 1500 1600 1800 2000 2300 2500 2550
8.00-9.90
10.00-32.00
** – Dimensions for plates of 4.000 to 10.000 mm in length. Plates of 3.000 to 12.000 mm in length may be produced upon request.
36
Special purpose rolled products for power industry and petrochemical industry
C Si Mn S P Al
20YuCh 0.16-0.22 0.17-0.37 0.50-0.80 0.003 0.02 0.03-0.10
Mechanical properties
Yield Ultimate Elongation, Impact toughness KCU, Cold
strength, tensile %, min J/cm2 bending
N/mm2 strength, at -40°С, after strain at
N/mm2, min min ageing, at 180°С
+20°С, min
* – properties are non specified, but checked and recorded into a quality certificate.
Range of dimensions**, mm
Thickness Width
20YuCh 1500 1600 1700 1800 1900 2000 2250 2500 2750 3000
8.00-9.90
10.00-50.00
50.10-120.00
** – Dimensions for plates of 4.000 to 10.000 mm in length. Plates of 3.000 to 12.000 mm in length may be produced upon request.
37
Mill 2000. Hot Strip Mill 2
38
Special purpose
rolled products for
shipbuilding
High strength steels 09KhN2MD(AB2-1) and 10KhN3MD(AB2-2) . . . . . . . . . . . . . . . 40
Higher strength steels A40, D40, E40, A36, D36, E36, A32, D32, E32 . . . . . . . . . . . . . 42
39
Special purpose rolled products for shipbuilding
Mechanical properties
Yield Tensile Elongation Reduction Percentage Impact
strength strength min, % of area, reduction in energy at
max, MPa max, MPa min, % cross sectional -40°С, J
area min, %
09KhN2MD(AB2-1)
588-716 637 18 55 25 78
10KhN3MD(AB2-1)
Range of dimensions*, mm
Thickness Width
09KhN2MD(AB2-1) 1400 1500 1600 1800 2000 2200 2500 2800 3200 3700
8.00-15.90
16.00-30.00
Thickness Width
10KhN3MD(AB2-1) 1400 1500 1600 1800 2000 2200 2500 2800 3200 3700
31.00-60.00
40
Special purpose rolled products for shipbuilding
Rolled products may be supplied according to GOST R 52927-2015 qualified by Russian Maritime Register of Shipping (example of steel grade
designation - РС F500W).
C Mn Si P S Cr Ni Mo Cu Al V Nb
A500, D500, 0.08-0.12 0.45-0.75 0.20-0.40 0.01 0.005 1.05-1.30 1.85-2.15 0.10-0.18 0.35-0.65 0.020-0.060 0.02-0.06 0.02-0.05
E500, F500
Mechanical properties
Thickness, Yield Tensile Elongation Impact Fibrous fracture
mm strength strength min, % energy at in natural thickness
min, МPа max, MPa -60 °С, J samples at room
temperature, %
Range of dimensions*, mm
Thickness Width
A500, D500, 1000 1500 1800 2000 2200 2400 2550 3000 3500 4000
E500, F500
8.00-11.99
12.00-70.00
41
Special purpose rolled products for shipbuilding
Rolled products may be supplied according to GOST R 52927-2015 qualified by Russian Maritime Register of Shipping andRussian River
Register (example of designation of PC A32), ABS, LR, DNV, BV, GOST 5521-93.
C Mn Si P S Cr Ni Mo Cu Al V Nb Тi
A32, D32, E32 0.025 0.025
0.18 0.90-1.60 0.15-0.50 0.30 0.40 0.08 0.35 0.020-0.060 0.05-0.10 0.02-0.05 0.02
A40, D40, E40, A36, D36, E36 0.020 0.015
Mechanical properties*
Thickness, Yield Tensile s Elongation Impact Impact Impact e
mm strength trength not min, % energy at energy at nergy at
min, МPа more than MPa 0 °С, J -20 °С, J -40 °С, J
4.00-7.49 22
7.50-9.99 26
A32
10.00-50.00 31
50.10-70.00 38
5.00-7.49 22
7.50-9.99 26
D32 315 440-570 22
10.00-50.00 31
50.10-70.00 38
5.00-7.49 22
7.50-9.99 26
E32
10.00-50.00 31
50.10-70.00 38
5.00-7.49 24
7.50-9.99 28
A36
10.00-50.00 34
50.10-70.00 41
5.00-7.49 24
7.50-9.99 28
D36 355 490-630 21
10.00-50.00 34
50.10-70.00 41
5.00-7.49 24
7.50-9.99 28
E36
10.00-50.00 34
50.10-70.00 41
4.00-7.49 26
A40 7.50-9.99 33
10.00-12.00 39
5.00-7.49 26
7.50-9.99 33
D40 390 510-660 20
10.00-50.00 39
50.10-70.00 46
5.00-7.49 26
7.50-9.99 33
E40
10.00-50.00 39
50.10-70.00 46
42
Range of dimensions**, mm
Thickness Width
А32 1000 1200 1500 1600 1650 1700 1800 2500 3000 4000
4.00-4.99
5.01-5.99
6.00-7.99
8.00-91.99
10.00-120.00
12.01-70.00
Thickness Width
D32, Е32 1000 1200 1500 1600 1650 1700 1800 2500 3000 4000
5.01-5.99
6.00-7.99
8.00-9.99
10.00-12.00
12.01-70.0
Thickness Width
A36, D36, E36 1000 1200 1500 1600 1650 1700 1800 2500 3000 4000
4.00-4.99
5.00-6.00
6.01-6.99
7.00-9.99
10.00-12.00
12.01-70.0
Thickness Width
A40 1000 1200 1500 1600 1650 1700 1800 2500 3000 4000
4.00-5.49
5.50-5.99
6.00-12.0
Thickness Width
D40, E40 1000 1200 1500 1600 1650 1700 1800 2500 3000 4000
5.00-5.49
5.50-5.99
6.00-6.99
7.0-09.99
10.00-12.00
12.01-70.00
43
Special purpose rolled products for shipbuilding
C Mn Si P S Cr Ni Mo Cu Al V Nb Ti
A40S, D40S, 0.12 0.50-0.80 0.80-1.10 0.02 0.015 0.60-0.90 0.50-0.80 0.08 0.40-0.60 0.020-0.060 0.05-0.10 0.02-0.05 0.02
E40S
Mechanical properties*
Standard Thickness, Yield Tensile s Elongation Impact Impact Impact
for steel grade mm strength trength not min, % energy at energy at energy at
min, МPа more than 0 °С, J -20 °С, J -40 °С, J
MPa
4.00-4.99
5.00-7.50 25
GOST R 52927-2015 530-690 20
7.50-9.99 30
A40S 10.00-12.00 36
7.00-7.00 25
GOST R 5521-93 7.10-9.90 530-720 30
10.00-40.00 36
19
5.00-7.50 25
GOST R 52927-2015 7.50-9.99 30
10.00-12.00 390 36
D40S
7.00-7.00 25
GOST R 5521-93 7.10-9.90 530-720 30
10.00-40.00 36
19
5.00-7.50 25
GOST R 52927-2015 7.50-9.99 30
10.00-12.00 36
E40S
7.00-7.00 25
GOST R 5521-93 7.10-9.90 530-720 19 30
10.00-40.00 36
44
Range of dimensions**, mm
Thickness Width
А40S 1000 1300 1500 1600 1650 1800 1850 2000 2300 2500
4.00-5.49
5.50-5.99
6.00-6.99
7.00-12.00
12.00-40.00
Thickness Width
D40S, E40S 1000 1300 1500 1600 1650 1800 1850 2000 2300 2500
5.00-5.49
5.50-5.99
6.00-6.99
7.00-12.00
12.00-40.00
45
Special purpose rolled products for shipbuilding
Rolled products comply with GOST R 52927-2015, GOST R 52927-2015 qualified by Russian Maritime Register of Shipping, Russian River Register
(example of designation of PC A), ABS, LR, DNV, BV, GOST 5521-93.
C Mn Si P S Cr Ni Cu Al V Nb Ti
А, В, D 0.21
0.60-1.0 0.15-0.35 0.025 0.025 0.30 0.40 0.35 0.020-0.060 0.05-0.10 0.02-0.05 0.02
E 0.18
Mechanical properties*
Thickness, Yield Tensile s Elongation Impact Impact Impact Impact
mm strength trength not min, % energy at energy at energy at energy at
min, МPа more than 0 °С, J -20 °С, J -40 °С, J +20 °С, J
MPa
4.00-7.50
7.50-10.00
A 10.00-50.00
50.00-70.00 34
70.00-100.00 41
5.00-7.49 19
7.50-9.99 24
B
10.00-50.00 27
50.10-70.00 235 400-520 22 34
5.00-7.49 19
7.50-9.99 24
D
10.00-50.00 27
50.10-70.00 34
5.00-7.49 19
7.50-9.99 24
E
10.00-50.00 27
50.10-70.00 34
46
Range of dimensions**, mm
Thickness Width
A 1000 1400 1600 1700 1800 1900 2000 2500 3000 4000
4.00-4.99
5.00-5.99
6.00-6.99
7.00-9.99
10.00-11.99
12.00-70.00
Thickness Width
B, D, E 1000 1400 1600 1700 1800 1900 2000 2500 3000 4000
5.00-5.99
6.00-6.99
7.00-9.99
10.00-11.99
12.00-70.00
47
Complex steel refining facilities – Ladle-Furnace 2
48
Duplex
steel
Duplex hot rolled sheets
09G2S+08Kh13, 16GS+08KhХ13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
49
Duplex steel
C Si Mn P S Cr Ni Cu N Al Ti As V W
16GS
0.12-0.18 0.40-0.70 0.90-1.20 0.030 0.035 0.30 0.30 0.30 0.12 - 0.04 0.08 - -
base layer
09G2S 0.02-
0.12 0.50-0.80 1.30-1.70 0.030 0.035 0.30 0.30 0.30 0.12 0.04 0.08 0.12 -
base layer 0.06
08Kh13
0.08 0.80 0.80 0.030 0.025 12.0-14.0 - 0.07 - 0.20 0.20 - 0.20 0.20
clad layer
Mechanical properties
Thickness, Yield Tensile Elongation Parallel Parallel
mm strength at strength min, % side bending side bending
+20°С min, MPa at +20°С min, MPa (clad layer out) (clad layer in)
Range of dimensions*, mm
Thickness Width
09G2S+08Kh13 1200 1400 1600 1800 2000 2300 2600 2900 3200 3500
10.00-70.00
Thickness Width
16GS+08Kh13 1200 1400 1600 1800 2000 2300 2600 2900 3200 3500
10.00-50.00
* – Dimensions for sheets of 4.000 - 10.000 mm in length. Sheets of 3.000 –12.000 mm in length may be produced upon request.
50
Duplex steel
* – Ni+Cumax 0.50%.
Mechanical properties
Thickness, Yield Tensile Elongation Bend by 90° Bend by 90
mm strength strength min, % (clad layer out) (clad layer in)
min, МPa min, МPа
Range of dimensions**, mm
Thickness Width
09G2S+ShKh15 900 1000 1100 1200 1300 1400 1500 1600 1800 2000
8.00-20.00
Thickness Width
30KhGSА+ShKh15 900 1000 1100 1200 1300 1400 1500 1600 1800 2000
10.00-20.00
** – Dimensions for sheets of 4.000 to10.000 mm in length. Sheets of up to 12.000 mm in length may be produced upon request.
51
Duplex steel
C Si Mn P S Cr Ni Cu N Al Mo Ti V W
12KhМ
0.16 0.17-0.37 0.4-0.7 0.025 0.025 0.8-1.1 0.30 0.30 0.012 0.05 0.4-0.5 - - -
base layer
08Kh13
0.08 0.80 0.80 0.030 0.025 12.0-14.0 - 0.07 - 0.20 - 0.20 0.20 0.20
clad layer
Mechanical properties*
Thickness, Yield Tensile Elongation Parallel Parallel
mm strength strength min, % side bending side bending
min, МPа min, МPa (clad layer out) (clad layer in)
Range of dimensions**, mm
Thickness Width
12KhM+08Kh13 1300 1400 1600 1800 2000 2200 2400 2600 2800 3000
8.00-75.00
** – Dimensions for sheets of 4.000 – 10.000 mm in length. Sheets of up to 12.000 mm in length may be produced upon request.
52
Duplex steel
08Kh13
0.08 0.80 0.80 0.030 0.025 12.0-14.0 - 0.07 - 0.20 - 0.20 0.20 - 0.20
clad layer
Mechanical properties*
Thickness, Yield Tensile Elongation Parallel Parallel
mm strength strength min, % side bending side bending
min, МPа min, МPa (clad layer out) (clad layer in)
* –2-5 supply category asper GOST 14637-89 depending on specified characteristics of mechanical properties.
Range of dimensions**, mm
Thickness Width
St3sp+08Kh13 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
8.00-16.00
16.10-50.00
** – Dimensions for sheets of 4.000 – 12.000 mm in length. Sheets of from 2.000 mm in length may be produced upon request.
53
Mill 5000. Plate Mill
54
High-strength
steel
High-strength steels for cold stamping Severdom 420, S420mc,
S500mc, S550mc, S600mc, S700mc, Срс 700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
High-strengthsteel16Kh2GSB, 14KhG2SАFD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
55
High-strength steel
Rolled products comply with EN 10149-2-13, STO 00186217-191 СРС700, STO 00186217-308 SeverDom420.
Mechanical properties
Thickness, Yield Tensile Elongation
mm strength strength, min, %
min, МPа МPа
SeverDom420 4.00-16.00 19
420
S420MC 2.00-2.99 480-620 16
3.00-10.00 19
S500MC 2.50-2.99 500 12
550-700
3.00-10.00 14
S550MC 2.50-2.99 550 12
600-760
3.00-10.00 14
S600MC 5.00-12.00 600 650-820 13
S700MC 4.00-10.00 700 750-950 12
СРС700 4.00-8.00 700 12
750-930
8.01-10.00 680 12
56
Range of dimensions**, mm
Thickness Width
SeverDom420 950 1100 1200 1300 1400 1500 1600 1700 1800 1850
4.00-5.99
6.00-7.99
8.00-16.00
Thickness Width
S420MC 950 1100 1200 1300 1400 1500 1600 1700 1800 1850
2.00-3.00
3.01-3.50
3.51-3.99
4.00-6.00
6.01-7.99
8.00-10.00
Thickness Width
S500MC, 950 1100 1200 1300 1400 1500 1600 1700 1800 1850
S550MC
2.50-2.99
3.00-3.99
4.00-4.99
5.00-5.99
6.00-7.99
8.00-10.0
Thickness Width
S600MC 950 1100 1200 1300 1400 1500 1600 1700 1800 1850
5.00-5.99
6.00-12.0
Thickness Width
S700MC/ 950 1100 1200 1300 1400 1500 1600 1700 1800 1850
CPC700
4.00-10.0
** – Dimensions for sheets of 2.000 – 6.000 mm in length. Strips and slit coils maybe produced upon request.
57
High-strength steel
High-strength steels
Severweld690, S690QL, S460ML
Product type Edge Standard for tolerances
Hot rolled sheets trimmed/mill STO 00186217-294-14, EN 10029-10
C Mn Si P S Cr Nb Cu V
S690QL/Severweld690 0.20 1,80 0.86 0.020 0.020 1,60 0.07 0.55 0.14
S460ML 0.16 1,70 0.60 0.025 0.020 0.30 0.05 0.55 0.12
Mechanical properties
Standard Thickness, Yield Tensile Elongation Impact Impact
mm strength strength, min, % toughness KCU toughness KVat
min, МPа MPa -40°С min, J/cm2 -50°С min, J/cm2
S690QL EN 10025-6-04 8.00-50.00 690 770-940 14 29 -
50.10-100.00 690 760-930 14 - -
Severweld690 STO 00186217-294-14 8.00-50.00 690 770-940 14 29 -
50.10-100.00 650 760-930 14 - -
S460ML EN 10025-4-04 12.00-40.00 440 540-720 17 - 27
40.10-63.00 430 530-710 17 - 27
63.10-80.00 410 510-690 17 - 27
80.10-100.00 400 500-680 17 - 27
100.10-120.00 385 490-660 17 - 27
58
Range of dimensions, mm
Thickness Width
S690QL/
1400 1500 1600 2000 2400 2500 3000 3500 4000 4500
Severweld690*
8.00-8.90
9.00-9.90
10.00-100.00
Thickness Width
S460ML** 1400 1500 1600 2000 2400 2500 3000 3500 4000 4500
12.00-120.00
59
High-strength steel
C Si Mn V Cr Ni Mo Cu Al B Nb Ti P S
SeverHard 400
SeverHard 450 0.30 1.20 1.80 0.15 1.30 1.60 0.50 0.30 0.02-0.06 0.005 0.20 0.08 0.025 0.010
Mn + Cr + Mo + V + Cu + Ni
CEV = С +
6 5 15
Mechanical properties*
Hardness, HB Yield Ultimate Elongation
strength tensile strength min, %
min, N/mm2 min, N/mm2
Range of dimensions**, mm
Thickness Width
SeverHard 400, 1500 1650 1800 1900 2000 2100 2200 2300 2400 2500
SeverHard 450
7.00-15.00
16.00-30.00
31.00-50.00
** – Dimensions for sheets of 4.000 – 10.000 mm in length. Sheets of up to 12.000 mm in length may be produced upon request.
60
High-strength steel
High-strengthsteel16Kh2GSB, 14KhG2SАFD
Product type Edge Standard for tolerances
Hot rolled sheets trimmed/mill GOST 19903-2015, TU 14-1-3323-04
C Mn Si P S Cr Nb Cu Al Ni V
16Kh2GSB 0.14-0.18 0.5-0.9 0.3-0.7 0.015 0.010 1.1-1.6 0.03-0.06 - - - -
14KhG2SАFD 0.12-0.18 1.00-1.80 0.4-0.7 - - 0.4-0.8 - 0.1-0.4 0.010-0.60 0.34 0.04-0.08
Mechanical properties
Standard Thickness, Yield Tensile Elongation Impact
mm strength strength min, % toughness
MPa min, МPа KCU at -40°С
min, J/cm2
16Kh2GSB TU 14-1-5517-05 10.00-18.00 590-835 690-930 14 39
14KhG2SАFD TU 14-1-3323-04 8.00-50.00 590-835 690-930 14 39
Range of dimensions*, mm
Thickness Width
16Kh2GSB 1400 1600 1800 1900 2000 2100 2200 2300 2400 2500
10.00-18.00
Thickness Width
14KhG2SАFD 1400 1600 1800 1900 2000 2100 2200 2300 2400 2500
8.00-50.00
9.00-9.90
10.00-50.00
* – Sheet length is 4.000 – 12.000 mm. If thickness is above 28 mm, limits on sheet length are applicable and specified upon request.
61
High-strength steel
C Mn Si P S Cr Ni Cu Mo V Nb
40KhS2N2М 0.33-0.38 0.50-0.80 1.00-1.20 0.015 0.005 0.50-0.70 1.50-1.80 0.30 0.30-0.50 - -
42KhSNМА 0.39-0.43 0.40-0.60 1.30-1.50 0.015 0.005 0.90-1.20 1.20-1.40 0.25 0.30-0.50 - -
43KhSNМА 0.41-0.45 0.40-0.70 1.40-1.65 0.015 0.005 1.20-1.45 1.20-1.45 0.30 0.30-0.50 - -
44KhNМFА 0.43-0.48 0.30-0.60 0.15-0.40 0.015 0.005 1.50-1.80 0.80-1.20 0.40 0.50-0.65 0.10-0.15 -
45KhNМFА 0.41-0.47 0.50-0.80 0.17-0.37 0.012 0.010 1.40-1.70 0.90-1.20 0.30 0.60-0.80 0.25-0.35 -
45KhSNМFBА 0.41-0.45 0.20-0.50 1.30-1.60 0.015 0.005 1.00-1.20 1.00-1.20 0.30 0.15-0.20 0.08-0.10 0.05-0.07
45Kh2NМFBА 0.43-0.48 0.30-0.60 0.15-0.35 0.015 0.005 1.50-1.80 0.80-1.20 0.30 0.50-0.70 0.08-0.10 0.05-0.07
Mechanical properties
Hardness,
НВ max
40KhS2N2М 444
42KhSNМА 300
43KhSNМА 360
44KhNМFА min 180
45KhNМFА 285
45KhSNМFBА 321
45Kh2NМFBА 444
Range of dimensions*, mm
Thickness Width
40KhS2N2М, 950 1050 1150 1250 1400 1500 1600 1700 1800 1850
42KhSNМА,
2.00-3.00
43KhSNМА,
44KhNМFА, 3.10-5.00
45KhNМFА,
5.10-12.00
45KhSNМFBА,
45Kh2NМFBА 12.10-16.00**
62
High-strength steel
C Mn Si P S Cr Ni Mo Cu N Al
07Kh3GNМYuА 0.06-0.10 0.80-1.20 0.17-0.37 0.025 0.025 2.90-3.40 0.90-1.20 0.20-0.30 0.25 0.012 0.02-0.05
Mechanical properties
Yield Tensile Elongation
trength strength min, %
max, МPа max, МPа
Range of dimensions, mm
Thickness Width
63
Plasma Cutting Machine at Kolpino Steel Service Center
64
Recommendations on
high-strength steel
processing
Bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
65
Recommendations on high-strength steel processing
• Semi-automatic gas-shielded arc welding with a solid wire. Welding process designation and name according to
GOST R ISO 4063-2010: 135 – Metal active gas arc welding with a solid wire.
• Widely used by manufacturers of welded steel structures for industry and construction applications.
• Due to welding arc behavior, gas-shielded welding with a solid wire demonstrates the best hydrogen content
in weld metal (in terms of minimization of this content) among all welding procedures widely used in the
industry.
Welding consumables:
A list of welding wires which demonstrated good results for all types of tests:
Steel grade Welding wire grade TU, standard number Classified designation
66
Recommendations on high-strength steel processing
Technological process
• Grinding of welded edges and adjacent areas to a metallic sheen for the width of 20 mm.
Bevelling:
• Structural elements and sizes of prepared edges of welded parts and weld joints are specified in design
documents on a specific product and depend on thickness of welded rolled products, location of welded parts
relative to each other as well as other process and design parameters.
Temperature conditions:
Welding parameters
Shielding gas
Current force, Arc voltage, Current Welding speed,
flow rate,
А* В (polarity) m/h
l/min
180-190 18-20 direct
18-19 18
240-250 22-24 reversed)/ DC(+)
* – current forces are given for the first and following layer welds.
Types of joints:
Butt joint
T-joint
Overlap jointa
67
Recommendations on high-strength steel processing
• No thermal influence on material to be processed that prevents from sheet deformation, alloying element
expulsion, metal sticking and burning-off.
• The process is explosion and fire-proof.
• No hazardous gas emissions. As a result, the process is eco-friendly.
68
Preparation of rolled products for cutting:
1. Steel surface shall be clean before cutting (without scale, rust and other impurities). If any impurities are
present the surface shall be ground to a metallic sheen.
2. Remove moisture from surface.
3. In case of cutting in winter, steel shall be delivered to worksites prior to cutting in order to ensure it is warmed
up to an ambient temperature.
Plasma cutting:
It is required to make some cuts at higher current in order to choose the appropriate current and cutting speed.
Current shall be after reduced depending on cutting speed, if necessary. If current is too high or cutting speed is
too low metal to be cut is overheated and scale may appear. When cutting speed and current are appropriate a
cut is very clean, with almost no scale on its surface, and metal to be cut is deformed insignificantly.
Gas cutting:
Cutting shall be started from sheet ends. First of all, steel shall be heated by preheating flame. Then a
cutting oxygen jet is applied, with a cutter moving uniformly along the cut outline. The distance between
steel and the cutter shall ensure steel heating by the reducing zone which is 1.5-2 mm away from the core,
i.e. by the reheating flame point with the highest temperature.
Stack cutting is used to cut thin sheets (max 8-10 mm in thickness). Sheets shall be tightly stacked and
clamped. However, big air gaps between sheets in a stack cause poor cutting.
Hydro-abrasive cutting:
Steel sheet stacking is recommended when it is necessary to cut thin sheets (up to 3 mm). It is
recommended to avoid cutting via air gaps between sheets in a stack which are more than 0.5 mm. A jet
often expands in the gap and cuts the bottom sheet with a lower accuracy. When cutting a group of sheet
materials, try to keep them as close to each other as possible.
Small abrasive particles (0.125 mm or less in diameter) ensure lower speed of hydro-abrasive cutting but a
smoother cut surface compared to abrasive particles of 0.2-0.3 mm in diameter.
69
Recommendations on high-strength steel processing
Bending
Steels are characterized by good ductility and bendability and can be easily formed in mechanical shops.
Surface preparation:
• Sheet surface shall be clean before forming, i.e. without any scratches, burrs after edge cutting and excess welds.
It is recommended to grind sheet edges.
• Sheets taken from a cold warehouse shall be warmed up to an ambient temperature before forming.
Equipment preparation:
It is recommended to use proper mechanical equipment to achieve appropriate steel forming results. Worn out
forming tools and insufficient lubrication deteriorate forming results.
Hardness of edges of bending matrix opening shall be equal to or higher than hardness of bended sheets to avoid
damages. Matrix edges shall be clean, without any damages, and be well lubricated.
70
Recommendations on high-strength steel processing
Unique experience and competences in rolled product properties, manufacturing and processing technologies as well
as special purpose equipment.
A broad network of experts which includes more than 300 industry and academic partners and
developers of special purpose software such as:
71
Delivery and packaging
Severstal delivers steel products to customers by three means of transport:
By rail:
containers, open wagons, special non-covered platforms
By road:
enclosed and open carriers
By water:
in closed holds or containers
Name Features
Packaging into waterproof paper Increased corrosion protection. May be additionally put on euro-pallets to
and cases of galvanized sheets ensure multiple handling operations.
Hot-rolled coils
Package does not prevent from corrosion and mechanical damages.
Packaging of hot-rolled coils Intended to keep product appearance during handling, transportation and
storage.
72
Typical packaging schemes
Packaging of slit hot-rolled coils
1
1. High-strength packing straps 1.5х32 mm
2. Packing seals
2 3. Identification tags
4
6
73
Product
marking
QR and bar-code marking enables customers to explicitly identify
the belonging of each shipped product unit by means of mobile
electronic systems.
• Simplified product acceptance procedure through the use of electronic devices to read information from
product labels
• Elimination of errors related to the transfer of incoming products data into customers’ information systems
• Opportunities for enhancing of warehouse accounting automation and issuing of production orders
74
Technical Support Service and
Customer Support Service
Severstal provides a full range of technical and service support to its custom-
ers. The company ensures close collaboration with customers providing pro-
fessional services and finding effective solutions arisen out of technical and
various order-related issues.
Main objectives:
• Individual approach to each customer at all touchpoints with the company.
• All technical, financial and other issues are addressed by the one stop principle.
• Solving of any issues arisen when dealing with Severstal’s products, including using the 8D methodology.
• Development and support of new steel products from ideas to commercial batch processing.
• Product homologation as required by Russian and international companies and their suppliers.
• Working with information services such as the User Account and online checking of certificate
authenticity.
• Day-to-day focus on improving customer service quality, including based on customer feedback.
e-mail: tech_support@severstal.com
75
SSC Kolpino
Ижорский трубный завод
«СМЦ-Колпино»
General information
The Steel Service Center for plate processing. The Steel Service Center is focused on producing billets from
rolled products for mechanical engineering, shipbuilding and construction industries.
Общие сведения
Services
«СМЦ-Колпино» является структурным подразделением «Ижорского трубного завода». Специализиру-
ется на выпуске отработанных заготовок из металлопроката для нужд предприятий машиностроения,
• Shot-blasting and priming
автостроения, судостроения, а также строительной индустрии.
• Plasma cutting of flat products
• Bending, milling, welding, edging, boring
Услуги
Customers
• Дробеструйная очистка и грунтование.
• Плазменный раскрой листового металлопроката.
Komatsu
• Гибка, Manufacturing
вальцевание, Rus, Caterpillar
сварка, обработкаTosno, P.G.сверловка
кромки, Korobkov IZ Karteks,
металла.
Hitachi Construction Machinery Eurasia, MAZ, KAMAZ, Mefro Wheels, shipyard Zvezdochka (branch in
Astrakhan), Yaroslavl shipyard, DVZ Zvezda.
Клиенты
«Комацу Мэнуфэкчуринг Рус», «Катерпиллар-Тосно», «ИЗ-Картэкс имени П.Г. Коробкова», «Хитачи
Констракшн Машинери Евразия», «МАЗ», «КАМАЗ», «Мефро уилз», Филиал Астраханский
«ЦС «Звездочка», «Ярославский судостроительный завод», «ДВЗ Звезда».
76
Main equipment
Automatic shot-blasting & priming line
Hydraulic bending machine ERMAK with CNC, model CNC AP 3600-160 (Turkey)
Thickness of steel products to be processed: up to 7 mm.
Bend length: 3.600 mm.
Nominal force: 1.600 kN.
Hydraulic bending machine with CNC, model STS 800/620 (Russia/Germany)
Thickness of steel products to be processed: 6-40 mm.
Bend length: 3.600 mm.
Nominal force: 8.000 kN.
4-roll hydraulic bending machine with CNC МН 340G (Italy)
Thickness of steel products to be processed: 6-40 mm.
Bend length: 3.100 mm.
Minimum bend diameter: 495 mm. Maximum bend diameter: 4.500 mm. Cone bending: 4°-130°.
Bevelling machines ensure proper preparation of billet surface for welding. Welding machines are
intended to weld shells and manufacture both structures to be assembled and finished steel structures.
If necessary, ultrasonic inspection of welding quality is possible.
Maximum thickness of steel products: 200 mm.
Maximum drilling diameter: 75 mm.
Threading: М60.
77
Severstal Metiz
«Северсталь-метиз»
General information
Общие сведения
Severstal Metiz is an effective company which strives for improving its business processes, operates in niche
value-added segments (markets, industries, products), being focused on creating values for customers via the
best product/service portfolio.
«Северсталь-метиз» — это эффективно работающая компания, стремящаяся к совершенствованию
своих бизнес-процессов,
The company’s работающаяsystem
quality management в нишевых
(QMS)сегментах с высокой
complies with добавленной
international стоимостью
standard ISO 9001. The
(рынки, отрасли, продукты), ориентированная на создание ценности для клиента через лучший
company has also a certificate of conformity issued by the International Certification Network IQNet.
портфель «продукт-сервис».
This certificate confirms that the company’s management system complies with all international standard
requirements. Certification is an authoritative evaluation of Severstal Metiz’s QMS and ensures additional
Система менеджмента
advantages качестваmarket.
at the international (СМК) компании соответствует международному стандарту ISO 9001.
Компания также получила сертификат соответствия Международной Сети Сертификации IQNet.
Последний подтверждает полное соответствие менеджмента организации требованиям мировых
Customers
стандартов. Получение сертификатов является авторитетной оценкой СМК «Северсталь-метиза» и
дает компании дополнительные преимущества на международном рынке.
GAZ Group, AVTOVAZ, MAZ, BeLAZ, UAZ, PAZ, LiAZ, URAL, КААZ, ZAZ, Pavlovo BUS, Belarus, SAAZ, ZMZ,
Кроме того, производство калиброванного проката и стальных фасонных профилей «Северсталь-
BelZAN, UZ-TONG HEUNG CO, TOYOTA TSUSHO.
метиза» отвечает особым требованиям автомобильной промышленности, о чем свидетельствует
полученный сертификат соответствия международному отраслевому стандарту ISO/TS 16949.
Клиенты
«Группа «ГАЗ», АВТОВАЗ, «МАЗ», «БеЛАЗ», «УАЗ», «ПАЗ», «ЛиАЗ», «УРАЛ», «КААЗ», «ЗАЗ» «Павлово
BUS», «Беларус», «СААЗ», «ЗМЗ», «БелЗАН», UZ-TONG HEUNG CO, TOYOTA TSUSHO.
78
Products for mechanical engineering
Gauged bars with special surface finish
Shaped sections
Fasteners
Wire goods
79
SSM Tyazhmash
«ССМ-Тяжмаш»
Generalсведения
Общие information
SSM Tyazhmash–isмашиностроительное
«ССМ-Тяжмаш» Severstal’s mechanicalподразделение
engineering company. One of its business
ПАО «Северсталь». Одним lines is powder
из направлений
деятельности центра является порошковая металлургия. Опыт производства железных SSM
metallurgy. The company has been experiencing in powder production in the last 25 years. порошков
Tyazhmash has
насчитывает always
более tried toвека.
четверти maintain quality at aвсей
На протяжении highсвоей
level and broad its product
деятельности mix.
«ССМ-Тяжмаш» поддержи-
вает на высоком уровне качество и расширяет сортамент выпускаемой продукции.
Products are manufactured by up-to-date process equipment that ensures a flexible approach to
customer needs.
Продукция The technology
производится is based onтехнологическом
на современном using CherMK blast furnace iron asпозволяющем
оборудовании, a raw materialгибко
that
ensures high
подходить chemical purity
к запросам of powders
потребителей. produced.
Основой The quality
технологии management
является system isпервородного
использование certified for
compliance
чугуна with ISO 9001
Череповецкого requirements. комбината в качестве сырья, что обеспечивает высокую
металлургического
химическую чистоту производимых порошков. Система менеджмента качества сертифицирована
Besides, the
согласно company
стандарту delivers
ISO 9001.forgings, castings for railway cars and hot metal (cast iron) to external
customers.
«ССМ-Тяжмаш» взаимодействует на постоянной основе с ведущими научными организациями и
SSM Tyazhmash
проводит cooperates
различные with leading scientific
исследовательские companies and performs
и опытно-конструкторские работы.various research and
development works.
80
Products for mechanical engineering
Key advantages
• Unique characteristics – may be applied for a wide range of components
• Reduced plasticizing agent flow rate and force for pressing
• High quality of products due to chemical purity
• High compactability – up to 7.20 g/cm3 under 700 МPа.
Increased strength of raw press-formed products – up to 25 МPа with a sample density of 6.5 g/cm3.
Iron powders
Alloyed powders
SSM Tyazhmash’s manufacturing capabilities make it possible to vary powder characteristics depending
on individual customer needs.
• Forgings
• Castings
• Steel structures
• Steelmaking iron
81
User Account
Личный кабинет
Convenient
Удобный service
сервисat
наyour desktop
Вашем giving
рабочем столе
information on
с информацией:
• Order execution status: to be approved, being produced, shipped.
• О статусе исполнения заказов: на согласовании, в производстве, отгружено.
• О платежах:
• Payments: информация
information on ordersоб оплаченных
paid, заказах,
outstanding debts задолженности и предстоящих платежах.
and amounts payable.
• О статусе рассмотрения претензий: на рассмотрении, признано, оплачено.
• Claim status: handling, accepted, paid.
82
Tracking
Now it is possible to track a railway delivery status in the shipment report.
The system gives information on location of railway cars dispatched from the Cherepovets 2 Station.
Process
Flowchart
Coke Plant - Sinter Plant - Blast
Furnaces 8 Roll-formed Section shop
1 Sintering
2 Coking: 9 Pickling shop
Coke-OvenShop No. 1 Rolling & Annealing Shop
Coke-Oven Shop No. 2 Steel Finishing Shop No.3
3 Hot metal
10 Coating Shop No.1
Steelmaking Plant 11 Coating Shop No.2
4 BOF plant 12 Coating Shop No.3
5 EAF plant
13 Long Products Plant:
Flat Rolling Plant • Mill 150
6 Hot Strip Mill No.1 • Mill 250
Steel Finishing Shop No.1 • Mill 350
7 Hot Strip Mill No.2
Steel Finishing Shop No.2 14 Pipe manufacturing
Hot Rolling Shop No. 3
Pipe Shop