Академический Документы
Профессиональный Документы
Культура Документы
Tutorials ☰
These are the instructions to Flash Stock Rom or any custom rom using Smart
Flash Stock Rom using Smart Phone Flash Tool (SP Flash
Tool)
Step 1: Download and install Android USB Driver on your computer. In case
Android USB Drivers are already installed on your Computer then skip this step.
Step 2: Power Off your Android Smartphone and remove the Battery (if it is
removable).
Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your
Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After
Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in
Step#4).
Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.
rom folder).
Step 9: Now, Click on the Download Button to begin the Flashing Process.
Step 10: Now, Connect your Smartphone to the Computer using USB Cable
Press Volume Down or Volume Up key, so that your computer easily detect your
smartphone.
Step 12: Close the Smart Phone Flash Tool on your computer and disconnect
[*] The above tutorial only works with the Stock firmware or Custom Rom
[*] Backup Please: Take a backup of your important data before using the
[*] How to Flash IMEI: After flashing the firmware on your Mediatek
Device, you need to follow How to Flash IMEI using SN Write Tool to fix the
LOAD COMMENTS
Site Links
Download Gapps
Privacy Policy
Contact
Trending
Motorola Firmware
Samsung Firmware
Connect
Hosted on BlueHost