Академический Документы
Профессиональный Документы
Культура Документы
PSI
Over the last several decades, Jetstream of Houston, Call us today or visit our website at
LLP, a division of Federal Signal, has provided www.waterblast.com.
industrial high-pressure waterblast equipment, parts
and accessories to companies worldwide. In addition Jetstream of Houston
to manufacturing the highest quality waterblast 4930 Cranswick
equipment and parts, Jetstream's Industrial Sales Houston, TX 77041
Technicians have provided timely and cost efficient Phone: (713) 462-7000
waterblast solutions to thousands of customers across Fax: (713) 462-5387
the globe. Toll Free: (800) 231-8192
Here are just a few reasons why Jetstream is the Office Hours:
provider of choice in the high-pressure waterblast Monday-Friday
industry: 7:00 am to 6:00 pm (CST)
I
EXIT CONTENTS FRONT BACK NEXT
TABLE OF CONTENTS
40,000 PSI
Tube Cleaning System ........................................III
Surface Cleaning Systems ..................................IV
Jetstream offers a full line of ultra-high pressure tube cleaning tools. Tools include rigid and flexible lances and automat-
ic lancing machines—all designed for safe, efficient cleaning of boiler, exchanger, and condenser tubes.
Safety Shroud
Assembly Safety Apparel
Page F-4 Pages F-1 & 2
Multi-gun Applications
Jetstream Diesel Units
Jetstream’s 40,000 psi air-operated Pages A-3 & 4
Tornado Gun cleaning system allows
Y-Fitting
the simultaneous use of multiple guns for Page E-13
maximum productivity in applications Tornado Guns
Page B-1
such as surface prep, coating removal,
Hoses
paint booth cleaning, stripe removal, tank Page C-1
Tornado Nozzles
cleaning, etc. Page D-3
Multi-Mode Valves
Page B-3
Safety Apparel
Pages F-1 & 2
ELECTRIC UNITS
Product Description
Jetstream offers a complete line of 40,000 psi electric
units designed for maximum reliability and simplicity,
resulting in lower maintenance costs, less downtime,
and greater productivity. In addition to a wide selec-
tion of standard units and options, close collaboration
between Jetstream salesmen and engineers pro-
vides customers with almost unlimited options for
customization to meet specific needs.
Standard Features
.Open Drip, TEFC, or explosion proof motors from
125 to 250 horsepower
.Jetstream UNx pump:
- Superior performance, greater flexibility in the field,
and reduced downtime and maintenance
- See UNx Features and Benefits on page A-9
. Covered belt drive
. State-of-the-art controls
- Hand-adjustable bypass valve
- Start, stop, jog button control
- Shutdown system to protect equipment
. Two rupture disc holders
. Dual water filtration system
. 1/4" hot dipped galvanized steel water tank Typical 40,000 PSI Electric Unit Applications
. Heavy-duty 8" deep hot-dipped galvanized skid Jetstream Electric Units are ideal for use inside plants
or other permanent or indoor aplications, including:
. Paint Booth Cleaning
. Tube Cleaning
. Surface Prep
. Waterjet Cutting
Available Models
.Stationery Skid
.4-wheel steerable trailer
ELECTRIC UNITS
Options
.Steerable trailer (shown at right)
.Lifting bail
.Lifting eyes
.Forklift pads
.Motor Hour Meter
.Charge pump
.Across the line or reduced voltage (soft start) starter
DIESEL UNITS
Available Models
.4-wheel tandem trailer
.4-wheel steerable trailer
.Gooseneck Trailer
.Stationery Skid
Jetstream of Houston, LLP Copyright Jetstream of Houston, LLP ©2003
Phone: US & Canada: 800-231-8192 or 713-462-7000
Web Site: www.waterblast.com
A-3
EXIT CONTENTS FRONT BACK NEXT
UNITS
40,000 PSI
DIESEL UNITS
Trailer Options
.Hydraulic or electric brakes
.ICC trailer lighting
.Ball or ring coupler
.Aluminum Wheels
Goose Neck Trailer Unit
Other Additional Options
.Lifting bail
.Workbench and vise
.Racks for hoses, guns, and rigid lances
.Remote engine shutdown
.Charge pump
Skid Unit
Features
UNx Fluid End: Power End:
.Superior performance .Ductile iron power frame is the strongest in the industry
.Greater flexibility in the field .Heat treated billet alloy steel crankshaft
.Reduced downtime and maintenance .Largest bearings of any pump on the market
.See UNx Features and Benefits on page A-9
13.66
(347)
34.41
(874)
20.75
(527)
1.00-12UN 40,000 PSI
PORT CONNECTION
7.45
(189)
48.13 (1222)
8.20 1.19-16UN DISCHARGE 1.0 x .5 K.W.
(208) PORT CONNECTION (25.4 x 12.7)
1" NPT
SUCTION
20.88 4.25
(530) (108)
10.38
(264)
7.0
MANIFOLD IN (178)
4.75 (121) 2.56 LOWERED 10.63 20.25 (514)
(65) POSITION (270)
5.88 33.50 (851) Primary dimensions are in inches.
(149) 1.87 (48) Dimensions in parentheses are millimeters.
50.56 (1284)
Horsepower Chart
Pump Displacement at Specified Powers and Pressures*
Common Pump Operating Pressure
Engine psi bar psi bar psi bar
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
200 149 10.3 39.1 8.6 32.6 7.8 29.3
215 160 11.1 42.0 9.3 35.0 8.3 31.5
250 186 12.9 48.9 10.8 40.7 9.7 36.7
260 194 13.4 50.8 11.2 42.4 10.1 38.1
300 224 15.5 58.7 12.9 48.9 11.6 44.0
* Displacement (flow) values represented refer to "theoretical" flow,
neglecting inefficiency resulting from compressibility of water and
expansion of pressure-bearing components.
Recommended Accessory
POLISHING FILTER PACKAGE – See Unit & Pump Accessories, Page A-20
Features
UNx Fluid End:
.Superior performance Power End:
.Greater flexibility in the field .Ductile iron power frame is the strongest in the industry
.Reduced downtime and maintenance .Heat treated billet alloy steel crankshaft
.See UNx Features and Benefits on page A-9 .Largest bearings of any pump on the market
13.66
(347)
34.41
(874)
20.75
(527)
1.00-12UN 40,000 PSI
PORT CONNECTION
7.45
(189)
48.13 (1222)
8.20 1.19-16UN DISCHARGE 1.0 x .5 K.W.
(208) PORT CONNECTION (25.4 x 12.7)
1" NPT
SUCTION
20.88 4.25
(530) (108)
10.38
(264)
7.0
MANIFOLD IN (178)
4.75 (121) 2.56 LOWERED 10.63 20.25 (514)
(65) POSITION (270)
5.88 33.50 (851) Primary dimensions are in inches.
(149) 1.87 (48) Dimensions in parentheses are millimeters.
50.56 (1284)
Horsepower Chart
Pump Displacement at Specified Powers and Pressures*
Common Pump Operating Pressure
Engine psi bar psi bar psi bar
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
150 112 7.8 29.3 6.5 24.4 5.8 22.0
177 132 9.1 34.6 7.6 28.8 6.9 26.0
200 149 10.3 39.1 8.6 32.6 7.8 29.3
Recommended Accessory
POLISHING FILTER PACKAGE – See Unit & Pump Accessories, Page A-20
Product Description
The 40,000 psi UNx Fluid End is a cost-effective solution
to increase the available operating pressure or range of
pressures of an existing Jetstream 3600 or 4200 UNx
Pump. The upgrade delivers all of the benefits of lower
pressure UNx Fluid Ends:
. Superior performance
. Greater flexibility in the field
. Reduced downtime and maintenance
. See UNx Features and Benefits on page A-9
Includes gauge, adapter, and two rupture disc holders.
Electric units require a bypass valve, not included.
Pump Displacement at Specified Powers and Pressures* * Displacement (flow) values represented refer to “theoretical” flow,
neglecting inefficiency resulting from compressibility of water and
Common Pump Operating Pressure
expansion of pressure-bearing components.
Engine psi bar psi bar psi bar
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
150 112 7.8 29.3 6.5 24.4 5.8 22.0
177 132 9.1 34.6 7.6 28.8 6.9 26.0
200 149 10.3 39.1 8.6 32.6 7.8 29.3
215 160 11.1 42.0 9.3 35.0 8.3 31.5
250 186 12.9 48.9 10.8 40.7 9.7 36.7
260 194 13.4 50.8 11.2 42.4 10.1 38.1
300 224 15.5 58.7 12.9 48.9 11.6 44.0
Related Items
BYPASS VALVE – See Unit & Pump Accessories, Page A-21
FITTINGS – See Fittings & Gauges, Section E
GAUGES – See Fittings & Gauges, Page E-1
Recommended Accessory
CARTRIDGE STYLE POLISHING FILTER – See Unit & Pump Accessories, Page A-20
14d
11d 14c
11c
11b 14b
14a
11a
19a
19b
19c
19d
19f 19e
Water Lube Harness
(Item 19)
Pump Displacement at Specified Powers and Pressures* * Displacement (flow) values represented refer to
“theoretical” flow, neglecting inefficiency resulting
Common Pump Operating Pressure
from compressibility of water and expansion of
Engine psi bar psi bar psi bar pressure-bearing components.
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
150 112 7.8 29.3 6.5 24.4 5.8 22.0
177 132 9.1 34.6 7.6 28.8 6.9 26.0
200 149 10.3 39.1 8.6 32.6 7.8 29.3
215 160 11.1 42.0 9.3 35.0 8.3 31.5
Related Items
RUPTURE DISC HOLDERS – See Safety, Page F-3
FITTINGS – See Fittings & Gauges, Section E
GAUGES– See Fittings & Gauges, Page E-1
Recommended Accessory
CARTRIDGE STYLE POLISHING FILTER – See Unit & Pump Accessories, Page A-20
14d
11d 14c
11c
14b
11b
14a
11a
19a
19b
19c
19d
19f 19e
Water Lube Harness
(Item 19)
Pump Displacement at Specified Powers and Pressures* * Displacement (flow) values represented refer to
“theoretical” flow, neglecting inefficiency resulting
Common Pump Operating Pressure
from compressibility of water and expansion of
Engine psi bar psi bar psi bar pressure-bearing components.
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
200 149 10.3 39.1 8.6 32.6 7.8 29.3
215 160 11.1 42.0 9.3 35.0 8.3 31.5
250 186 12.9 48.9 10.8 40.7 9.7 36.7
260 194 13.4 50.8 11.2 42.4 10.1 38.1
Related Items
RUPTURE DISC HOLDERS – See Safety, Page F-3
FITTINGS – See Fittings & Gauges,Section E
GAUGES– See Fittings & Gauges, Page E-1
Recommended Accessory
CARTRIDGE STYLE POLISHING FILTER – See Unit & Pump Accessories, Page A-20
14d
11d
11c 14c
11b
14b
14a
11a
24
19a
19f
19b
19c
19d
19e
19f
Water Lube Harness
19b
(Item 19) 19c
Pump Displacement at Specified Powers and Pressures* * Displacement (flow) values represented refer to
“theoretical” flow,neglecting inefficiency resulting
Common Pump Operating Pressure
from compressibility of water and expansion of
Engine psi bar psi bar psi bar pressure-bearing components.
Powers 30,000 2,069 36,000 2,483 40,000 2,758
hp kW gpm lpm gpm lpm gpm lpm
200 149 10.3 39.1 8.6 32.6 7.8 29.3
215 160 11.1 42.0 9.3 35.0 8.3 31.5
250 186 12.9 48.9 10.8 40.7 9.7 36.7
260 194 13.4 50.8 11.2 42.4 10.1 38.1
300 224 15.5 58.7 12.9 48.9 11.6 44.0
Related Items
RUPTURE DISC HOLDERS – See Safety, Page F-3
FITTINGS – See Fittings & Gauges, Section E
GAUGES– See Fittings & Gauges, Page E-1
Recommended Accessory
CARTRIDGE STYLE POLISHING FILTER – See Unit & Pump Accessories, Page A-20
14d
11d 11
14c
11c 10
11b 14b 9
14a
11a
25
8
7
19a
19b
8a
19c
19d
19f 19e
Water Lube Harness
(Item 19)
Part Part Part
Item Description Item Description Item Description
Number Number Number
1 26487 Deflector 11 53495 Uni-Valve 16 28090 Anti-Vibration Gland Set
2 51736 Plunger Coupling 11a 54143 Seal Kit 17 53572 Adapter, Male Port x
53561 #6 Plunger 11b 28802 Retaining Ring 9/16" HP Female
3 53562 #7 Plunger 11c 53492 Spring Retainer 18 25607 Manifold Bolt
53563 #8 Plunger 11d 27509 Spring 19 53795 Water Lube Harness
4 54101 Gland Nut 12 ~ See Pump Discharge Fittings, 19a 26469 Hose (Order in Feet)
5 26464 O-Ring Pages E-4 & E-5 19b 27475 Needle Valve
27479 #6 Guide Bushing 13 53756 Manifold 19c 26465 Nipple
6 27480 #7 Guide Bushing 14 53505 Rupture Disc Holder 19d 53792 Lube Manifold
27481 #8 Guide Bushing 14a 27502 O-Ring 19e 27101 Ball Valve
54116 #6 Packing 14b 53576 Base 19f 26874 Hose Fitting
7 54117 #7 Packing 28575 Disc, 35,000 psi Burst Pressure 20 50295 Trunnion Rod
54118 #8 Packing 28576 Disc, 40,000 psi Burst Pressure 21 51659 Trunnion
54096 #6 Sleeve 14c 28615 Disc, 45,000 psi Burst Pressure 22 26468 Cotter Pin
8 54097 #7 Sleeve 27484 Disc, 50,000 psi Burst Pressure 23 50889 Pump Wrench
54098 #8 Sleeve 27485 Disc, 56,000 psi Burst Pressure 24 26212 Adapter Plate Bolt
8a 26522 O-Ring 14d 53578 Hold-Down Ring 25 51714 Adapter Plate
9 53769 Stuffing Box 14e 53579 Cap 26 51719 Plunger Adapter
10 54125 Stuffing Box Seal 15 27488 Gage. (0-60,000 psi)
Product Description
The Jetstream Hydro-Throttle is a hydraulic throttle control
that enables the operator to reduce the engine to idle
speed and relieve the system of high pressure when
the gun trigger is released—saving water and fuel and
reducing wear on the engine and pump. When the gun is
again engaged, the Hydro-Throttle senses the change in
pressure and increases the engine speed until the pump
again reaches the desired operating pressure.
Features
.Quick panel or bracket mount installation
.Easily knob adjustable under all operating conditions
.Flexible control cable for quick, easy routing and
minimal drag
.Replaceable cartridge for fast field service or conversion
to another pressure range
.Back-pressure adjustment screw to overcome exces-
sive system back-pressure when control gun is disen-
gaged
Assemblies include control unit, cartridge, and control
cable. 6 ft. hose, sold below, is required to connect unit
Replacement Parts
53609 Cartridge
51903 Control Cable, 2 ft. solid wire
51903A Control Cable, 5 ft. braided wire
27731-00639392 Hose
Related Items
53671 Adapter, 9/16" Type “M” Male x Pump Discharge Male (for use on Jetstream pumps)
27706 Adapter, 9/16" Type “M” Male x 9/16" High Pressure Male
For other connection types, see Fittings, Section E
Product Description
Available for a range of flows to meet all needs, Jetstream
filters provide the necessary protection to even the most
versatile waterblast system. The severe conditions of
40,000 psi pumps require a higher degree of protection,
and it is recommended that water is filtered to 10 microns
by a primary filter and then by a secondary 1 micron filter
before entering the pump.
Filter
Element
Part Number 27503
Cartridge Style Polishing Filter
Features
.Secondary Filter Assembly can be mounted directly to
all Jetstream and some non-Jetstream brand power
frames (as shown) or mounted vertically, using the
stand that is included (not shown); see part number
27503 on page A-19 for filter specifications
. Differential pressure switch detects clogged filter
elements and shuts down unit to prevent cavitation Part Number 53596 Polishing Filter Package
(Also sold separately below)
. Cam-Lok connections for easy conversions to and from
fluid ends with lower pressure ranges
. Hose, fittings, mounting hardware, wiring, 1 micron filter
element, and inlet water pressure gauge included
Replacement Parts
27504 1 Micron Filter Element (recommended)
27505 3 Micron Filter Element
27796 Filter Lid Gasket
27503-4 Filter Cartridge Retaining Bolt Part Number 27504 1 Micron Filter (20" Length)
27503-5 Filter Cartridge Retaining Washer
27503-1 Filter Swing Bolt
27503-2 Filter Eye Nut
27503-3 Filter Clevis Pin
28112 Differential Pressure Switch
Related Accessories
40K MALE PORT NIPPLE
Used to connect bypass valve to fluid end manifold.
Jetstream 40,000 psi Port Male connection.
Part Number 53735
Replacement Parts
8
Part
Item Description
7 Number
6 1 52144 Adjustment Knob
2 53713 Body
5 3 53725 Cartridge
4 13 4 53726 Diffuser
12
5 26452 O-Ring
3 6 27641 O-Ring
11
7 53724 Back-Up Ring
2 8 25796 Hose Fitting
9 50795 Locking Arm
10 25593 Capscrew
1 9 11 53719 Outlet Adapter
10 12 27644 Nipple
13 27645 Elbow
14* 25932 Hose (Order in Feet)
* Not Shown
Features
.Lightweight
.Extremely durable Kevlar drive belt TM
NOTE: Nozzle not included
.Customized top-of-the-line air tool to meet demanding
requirements of a waterblast application
.Sealed swivel assembly with heavy-duty thrust bearing
and quick-change swivel seal
.Accepts a variety of nozzles for a wide range
of applications
.All pressure-bearing components are stainless steel
.Large internal air porting for quick pressure release
53710 47.6 1210 10.9 4.9 3/8" HP Female 9/16" Button Seal 1500-3500 90 6.2 25 12 7 26.5 40,000 2,758
53880 56.6 1440 12.4 5.6 3/8" HP Female 9/16" Button Seal 1500-3500 90 6.2 25 12 7 26.5 40,000 2,758
* Gun includes adapter to connect hoses having 9/16" Type “M” connections. For other available fittings, see Section E.
Related Items
TORNADO NOZZLES – See Nozzles, Page D-3
MULTI-MODE TUMBLE BOX – See Pages B-3,4,5 & 6
UNLOADER TUMBLE BOX – See Pages B-7,8 & 9
21a 21g
21b
21f
ITEM 20 21c 8
20a 20
9
20b 7
21e 10
21 6
21d
11 3
19
16 12 2
17 1
22 18 13
14 11e
23 11a
15 11b
11c
11d
11g
11m
11n
11t
11s
11r
14 ITEM 11 11q
11k 11j 11h 11g 11f 11p
ITEM 11d
Replacement
Cartridge
Product Description Features
The Jetstream 40,000 psi Multi-Mode Valve is a .Self contained one piece cartridge for easy removal,
combination air-actuated high pressure control valve as opposed to multiple pieces for competitor type
and air preparation unit. The Multi-Mode Valve controls systems
the flow of the filtered and lubricated air and high pressure
water to the gun or other appropriate device. It can be
.Cartridge and other pressure containing components
machined from hardened stainless steel and coated
operated in FOUR different configurations (see operation for longer wear life
options on the next page) including the use of multiple
guns (see Jetstream Tornado Guns) when configured for
.Cartridge is hydraulically biased, for safer operation,
constant pressure or shut-off mode. as opposed to a spring return system which is
susceptible to corrosion, wear and failure
This Multi-Mode utilizes a self contained dual-seat
. Air supply pressure regulated to the custom designed
cartridge that can be easily removed in a single piece actuation cylinder. This constant pressure eliminates
and replaced in the field. Complete overhaul and damage to valve caused by excessive activation
modification can be accomplished in about one minute. forces
.Regulator, filter, and oiler components protected
Rated for 40,000 psi (2,758 bar) maximum operating against abuse and damage
pressure, the control valve features connections
specifically designed to resist wear and leakage common
.Ergonomically designed for ease of use and
transportation
with high pressure connections. Adapters are included
to connect high pressure hoses featuring the Type “M” .Heavy duty, light weight aluminum frame (3/8" plate)
connection. High pressure adapters are also available
(see Fittings, Section E).
Air Requirements
Dimensions Assembly Maximum Max. Operating
Assembly Weight Flow Rate Pressure Inlet Air Pressure
Part Number Width Depth Height Lubricator
Minimum Maximum
Oil
in mm in mm in mm lbs kg gpm lpm psi bar psi bar psi bar
1 3 15
53905 17 /
8 435 12 /
4 329 12 /
16 324 38.8 17.6 6.8 25.7 40,000 2,758 70 4.8 125 8.6 SAE 10W
Air Cylinder 2
To Gun
3
In
Mode
Configuration
Port 4
Valve
1) Dump Mode
Configured for SINGLE gun operations. When the user
is not blasting, the supply water is dumped to atmospheric
pressure through the Multi-Mode valve discharge port.
The dumped water can be piped to a holding or recycle
tank.
58 59
6 53570 Adapter, 40K Port Male x 7/8" Type "M" 36 28362 Gauge Boot
12 53571 Adapter, 40K Port Male x 9/16" Type "M" 42 28369 Plug
Replacement
Product Description Features Cartridge
The Jetstream 40,000 psi Unloader Valve is a combination .30 second field replaceable
air-actuated high pressure control valve and air preparation cartridge design for minimal downtime
unit for use in conjunction with the Jetstream Tornado Gun.
The Unloader Valve controls the flow of the filtered and
.Cartridge valve and seat machined from hardened
stainless steel and coated for longer wear life
lubricated air and high pressure water to the gun or other
appropriate device. When the gun is not engaged, the
.Cartridge is hydraulically biased to ensure positive
valve unloads, or “dumps” the water through a low-pressure disengagement, ensuring maximum safety
outlet to relieve the system of high pressure. .Air supply pressure regulated to actuation cylinder;
this constant pressure eliminates damage to valve
It is designed for single gun operation and utilizes the caused by excessive activation forces
patented Jetstream C-Series cartridge, which allows the
valve to be completely rebuilt in the field in less than one
.Custom designed actuation air cylinder for durability
minute. under severe conditions
.Regulator, filter, and oiler components protected
Rated for 40,000 psi (2,758 bar) maximum operating against abuse and damage
pressure, the control valve features Jetstream proprietary
connections specifically designed to resist wear and
.Ergonomically designed for ease of use and
transportation
leakage at extreme pressures. Adapters are included to
connect high pressure hoses featuring the Type “M” .Heavy duty, light weight aluminum frame (3/8" plate)
connection. High-pressure adapters are also available
(see Fittings, Section E).
Air Requirements
Dimensions Assembly Maximum Max. Operating
Assembly Weight Flow Rate Pressure Inlet Air Pressure
Part Number Width Depth Height Lubricator
Minimum Maximum
Oil
in mm in mm in mm lbs kg gpm lpm psi bar psi bar psi bar
1 3 15
54325 17 /
8 435 12 /
4 329 12 /
16 324 31.9 17.4 6.8 25.7 40,000 2,758 70 4.8 125 8.6 SAE 10W
Related Items
TORNADO GUN – See Pages B-1 & 2
HOSES– See Hoses, Pages C1 & 3
53 54
Part Part
Item Description Item Description
Number Number
1 28399 Capscrew 27 28223 Male Quick Disconnect Fitting
5 54321 Air Cylinder Mounting Plate 31 28375 Mounting Bracket (One Bracket)
6 53570 Adapter, 40K Port Male x 7/8" Type “M” 32 28374 Air Lubricator
12 53571 Adapter, 40K Port Male x 9/16" Type “M” 38 28136 Nipple
53470 DCP-40 Single Body Pad 7/8" Type “M” Male 9/16" HP Male 71 180 12.3 5.6 40,000 2,758
54380 DCPx-40 Single Shoulder Stock 7/8" Type “M” Male 9/16" HP Male 66 167 11.4 5.2 40,000 2,758
54405 DCP-40DD Dual Body Pad 7/8" Type “M” Male 9/16" HP Male 75 190 16.7 7.6 40,000 2,758
54435 DCPx-40DD Dual Shoulder Stock 7/8" Type “M” Male 9/16" HP Male 70 177 15.8 7.2 40,000 2,758
* Adapters available for other connection sizes and types. See replacement parts on the following page.
** Custom length barrels available. Call for information.
Shoulder Stock
DCPx Models
20
19
Part Part
Item Description Item Description
Number Number
1 53537 Nozzle Holder Cap 9 53475 C-40 Cartridge
2 53502 UHP Nozzle Retainer 10 25467 O-Ring
3 53536 Nozzle Holder 11 53175 Cartridge Plug
4 28090 Anti-Vibration Gland Set 12 27502 O-Ring
5 53260 Handle Assembly 13 52083 Collet Nut
5a 53292 Handle 14 52087 Collet
5b 53295 Trigger Assembly 15a 53468 Rear Barrel Adapter, Type M-14 Male
5c 26116 Pin 15b 53534 Rear Barrel Adapter, 3/8" HP Female
6 26689 Capscrew 15c 53529 Rear Barrel Adapter, Type M-9 Male
7 25193 O-Ring 16 53304 Shoulder Stock (DCP models only)
53465 DCP-40 Body Assembly 17 25296 Nut (DCP models only)
54385 DCPx-40 Body Assembly 18 53303 Stud (DCP models only)
8
54410 DCP-40DD Body Assembly 19 50127 Extension (DCPx models only)
54440 DCPx-40DD Body Assembly 20 50124 Shoulder Stock (DCPx models only)
Related Items
ORBI-JET NOZZLE – See Nozzles, Pages D-1 & 2
UHPX NOZZLES – See Nozzles, Page D-5
SAFETY SHROUDS & WHIPS – See Safety, Page F-4
Features
.30 second field replaceable cartridge design for
minimal downtime
.Safest gun in the industry! Custom safety cage and
thick blast wall protect operator better than any foot
control gun in the industry
. Built in "wings" protect high pressure end fittings from
external damage
. All pressure-bearing components are stainless steel
. Zinc-plated base and cage for corrosion resistance
Maximum Operating
Part Inlet & Outlet Dimensions (H x W x D) Weight
Model Pressure
Number Connections*
in mm lbs kg psi bar
53480 DCF-40 Jetstream 40K Port Female 7.9 x 14.8 x 12.7 200 x 380 x 320 26.2 11.9 40,000 2,758
* Adapters available for other connection sizes and types. See replacement parts below.
Replacement Cartridge
The DCF-40 Foot Control Gun utilizes the C-40 cartridge,
shown below, to completely rebuild the dump valve in
about 30 seconds!
Part Number 53475
Features
.30 second cartridge overhaul for easy field
maintenance
.Remote operation for added operator convenience
and safety
.Pneumatic operation for reduced operator fatigue
.40,000 psi working pressure for tough cleaning
applications
Replacement Cartridge 8
7
The Diverter Valve utilizes the C-40 Cartridge, 6
shown below, to completely rebuild the dump valve 5
in about 30 seconds!
Part Number 53475
Replacement Parts
Part
Item Description
Number
HOSE CHECKS
Manufactured from high tensile galvanized wire rope, Hose
Checks are installed on hose ends to prevent injury by
restraining the hose in the event of an end fitting failure.
Spring-retained for easy removal. Fits all 40,000 psi hoses.
Part Number 52242
Related Items
FITTINGS – See Fittings, Section E
SAFETY SHROUDS– See Safety, Page F-4
Jetstream of Houston, LLP Copyright Jetstream of Houston, LLP ©2003
Phone: US & Canada: 800-231-8192 or 713-462-7000 C-1
Web Site: www.waterblast.com
EXIT CONTENTS FRONT BACK NEXT
HOSES & LANCES
40,000 PSI
FLEX LANCES
Product Description
Flex Lances are uncovered flexible hoses used for the
cleaning of small diameter tubes such as those found in:
. Heat exchangers
. Condensers
. Boilers
Generally, they are connected to a tube nozzle with rearward
facing waterjets that pull the lance through a tube, even
around moderate bends, to allow efficient, powerful cleaning
of otherwise impossible to reach tube walls.
Flex Lances made to special lengths or with end fitting
combinations different from those in chart below can be
ordered on page C-3. See chart on page C-5 for
information on pressure drop through flex lances.
Max. Max. Minimum
End Fitting End Fitting Inside
Length Outside Operating Bend
Part Number Connection Connection Diameter
Diameter** Pressure Radius
(Inlet Side)* (Nozzle Side)*
ft m in mm in mm psi bar in mm
28460-0253239 9/16" Type “M” Female 3/8" HP Male 25 7.6 .16 4 .66 16.8 40,510 2,794 6.9 175
28460-0353239 9/16" Type “M” Female 3/8" HP Male 35 10.7 .16 4 .66 16.8 40,510 2,794 6.9 175
28460-0503239 9/16" Type “M” Female 3/8" HP Male 50 15.2 .16 4 .66 16.8 40,510 2,794 6.9 175
28460-0253232 3/8" HP Male 3/8" HP Male 25 7.6 .16 4 .66 16.8 40,510 2,794 6.9 175
28460-0353232 3/8" HP Male 3/8" HP Male 35 10.7 .16 4 .66 16.8 40,510 2,794 6.9 175
28460-0503232 3/8" HP Male 3/8" HP Male 50 15.2 .16 4 .66 16.8 40,510 2,794 6.9 175
27731-0253339 9/16" Type “M” Female 9/16" HP Male 25 7.6 .20 5 .73 18.5 40,600 2,800 8.7 220
27731-0353339 9/16" Type “M” Female 9/16" HP Male 35 10.7 .20 5 .73 18.5 40,600 2,800 8.7 220
27731-0503339 9/16" Type “M” Female 9/16" HP Male 50 15.2 .20 5 .73 18.5 40,600 2,800 8.7 220
27731-0253333 9/16" HP Male 9/16" HP Male 25 7.6 .20 5 .73 18.5 40,600 2,800 8.7 220
27731-0353333 9/16" HP Male 9/16" HP Male 35 10.7 .20 5 .73 18.5 40,600 2,800 8.7 220
27731-0503333 9/16" HP Male 9/16" HP Male 50 15.2 .20 5 .73 18.5 40,600 2,800 8.7 220
* See Pages H-3 to H-5 for a description of each connection type. ** Sleeve O.D.
28460 Purple 0.16 4 0.45 11.5 40,510 2,794 101,500 7,000 6.90 175 0.245 0.365
27731 Purple 0.20 5 0.54 13.7 40,600 2,800 101,527 7,002 8.70 220 0.330 0.500
28612 Blue 0.32 8 0.76 19.0 40,580 2,799 101,450 6,997 9.84 250 0.740 1.10
27626 Purple 0.32 8 0.76 19.0 40,000 2,758 100,000 6,897 11.80 300 0.750 1.12
27524 Orange 0.32 8 0.70 17.8 36,250 2,500 90,600 6,248 10.25 260 0.558 0.830
* See End Fittings page in this section for maximum O.D. dimension.
HIGH PRESSURE
Sleeve Wear Guard
Hose
Size L OD Guard Sleeve
Series
(D) Diameter Diameter
1/4" 3.31 .66 .98 .95
28460
3/8" 3.34 .66 .98 .95
1/4" 3.43 .73 1.00 1.07
27731 3/8" 3.90 .73 1.00 1.07
9/16" 3.90 .73 1.00 1.07
3/8" 3.78 .96 1.27 1.34
27524
9/16" 4.25 .96 1.27 1.34
3/8" 3.78 1.09 1.40 1.47
27626
9/16" 4.25 1.09 1.40 1.47
28612 9/16" 5.13 1.10 1.27 1.49
TYPE "M"
Hex Wear Guard
Hose
Size L Size Guard Sleeve
Series
(H) Diameter Diameter
L
28460 9/16" 2.50 .75 .98 .95
27731 9/16" 2.96 .88 1.00 1.07
27524 7/8" 3.65 1.19 1.27 1.34
27626 7/8" 3.65 1.19 1.40 1.47
28612 7/8" 4.43 1.25 1.27 1.49
BURST SHIELD/GUARD
Constructed of steel wire reinforced heavy-duty synthetic
rubber. The Burst Shield/Guard helps protect the user
and/or surrounding areas from hose failures.
4500
50'
5000 100'
4000
25'
3500
4000
Pressure drop (psi)
3000 2500
2000
2000
1500
1000
1000
500
0 0
0 2 4 6 8 10 2 4 6 8 10 12 14
Flow rate (gpm) Flow rate (gpm)
8mm HOSE
SERIES 28612, 27626 & 27524
4000 100' 50' 25'
3500
3000
Pressure drop (psi)
2500
2000
1500
1000
500
0
5
5 10
10 15
15 20
20 25
25 30
30
Part
Number
Connection Connection
in mm in mm psi bar lbs/ft kg/m
1 2
53831 – XX 1/4" HP LH 1/4" HP LH .245 6.22 .083 2.11 60,000 4,138 .142 .211
54364 – XX 1/4" HP RH 1/4" HP RH .245 6.22 .083 2.11 60,000 4,138 .142 .211
54554 – XX 1/4" HP LH 1/4" HP RH .245 6.22 .083 2.11 60,000 4,138 .142 .211
54224 – XX 3/8" HP LH 3/8" HP LH .368 9.35 .125 3.18 60,000 4,138 .320 .475
54225 – XX 3/8" HP RH 3/8" HP RH .368 9.35 .125 3.18 60,000 4,138 .320 .475
54556 – XX 3/8" HP LH 3/8" HP RH .368 9.35 .125 3.18 60,000 4,138 .320 .475
54226 – XX 9/16" HP LH 9/16" HP LH .553 14.05 .188 4.78 60,000 4,138 .721 1.07
54227 – XX 9/16" HP RH 9/16" HP RH .553 14.05 .188 4.78 60,000 4,138 .721 1.07
54557 – XX 9/16" HP LH 9/16" HP RH .553 14.05 .188 4.78 60,000 4,138 .721 1.07
54228 – XX 9/16" HP LH 9/16" HP LH .553 14.05 .250 6.35 40,000 2,758 .649 .964
54229 – XX 9/16" HP RH 9/16" HP RH .553 14.05 .250 6.35 40,000 2,758 .649 .964
54558 – XX 9/16" HP LH 9/16" HP RH .553 14.05 .250 6.35 40,000 2,758 .649 .964
XX- Specify length in feet, up to 25 feet. Ex: 06 = 6 feet in length.
For lengths under 4 feet, see High Pressure Nipples in Fittings, Page E-11.
9000 9000
8000 8000
7000 7000
Pressure drop (psi)
5000 5000
4000 4000
3000 3000
2000 2000
1000 1000
0 0
0 1 2 3 0 2 4 6 8
Flow rate (gpm) Flow rate (gpm)
9000
3500
8000
3000
7000
2500
Pressure drop (psi)
6000
5000 2000
4000
1500
3000
1000
2000
1000 500
0 0
0 5 10 15 20 0 5 10 15 20
Flow rate (gpm) Flow rate (gpm)
Replacement Parts
UHPX NOZZLES are the premier high productivity Item Part Number Description
sapphire nozzle and are used in a variety of 40,000 psi 1 27523 Retaining Ring
applications. Tapered orifice retainer reduces turbulence and 2 53548 Shroud
provides a cohesive, aggressive waterjet. Rebuild Kit
3 53485
(Includes Items 3a to 3f)
Nozzle Selection
4 53544 Body
Select Nozzles from the chart below by finding the desired flow in
5 53541 Rotor
the column under the desired operating pressure. Read across to
find the nozzle Part Number in the chart’s left hand column. (Part 6 53502 UHP Nozzle Retainer
numbers referenced are for individual UHPX nozzles.) 7 53543 Retaining Screw
UHPX Nozzle Flow, Three UHPX Nozzles in Orbi-Jet @ Selected Working Pressures
Nozzle Orifice Size
20,000 psi 25,000 psi 30,000 psi 35,000 psi 40,000 psi
Part (1,379 bar) (1,724 bar) (2,069 bar) (2,414 bar) (2,758 bar)
Number in mm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm
53638 .010 0.25 1.7 6.6 2.0 7.8 2.3 8.9 2.4 9.2 2.5 9.5
53875 .011 0.28 1.9 7.3 2.2 8.5 2.6 9.7 2.7 10.1 2.8 10.4
53639 .012 0.30 2.1 8.0 2.5 9.3 2.8 10.6 2.9 11.0 3.0 11.5
53876 .013 0.33 2.3 8.8 2.7 10.2 3.1 11.6 3.2 12.1 3.3 12.6
53641 .014 0.36 2.6 9.7 3.0 11.2 3.3 12.6 3.5 13.2 3.7 13.8
53902 .015 0.38 2.8 10.6 3.2 12.2 3.6 13.8 3.8 14.5 4.0 15.1
53642 .016 0.41 3.1 11.6 3.5 13.4 4.0 15.0 4.2 15.8 4.4 16.5
53903 .017 0.43 3.4 12.7 3.8 14.5 4.3 16.3 4.5 17.2 4.8 18.0
53643 .018 0.46 3.6 13.8 4.2 15.8 4.7 17.7 4.9 18.7 5.2 19.6
53877 .019 0.48 4.0 15.0 4.5 17.1 5.1 19.1 5.4 20.3 5.6 21.3
53644 .020 0.51 4.3 16.3 4.9 18.5 5.5 20.7 5.8 21.9 6.1 23.1
54017 .021 0.53 4.6 17.6 5.3 20.0 5.9 22.3 6.3 23.7 6.6 25.0
54018 .022 0.56 5.0 19.0 5.7 21.5 6.3 24.0 6.7 25.5 7.1 26.9
53646 .023 0.58 5.4 20.4 6.1 23.2 6.8 25.7 ** ** ** **
54019 .024 0.61 5.8 21.9 6.6 24.8 ** ** ** ** ** **
53647 .025 0.64 6.2 23.5 7.0 26.6 ** ** ** ** ** **
54021 .027 0.69 7.1 26.8 ** ** ** ** ** ** ** **
** Indicates unsafe flows which are not recommended for use in a hand held control gun due to excessive thrust.
Product Description
.Designed for use with the Jetstream Tornado Gun and
other air-powered rotary control guns
.Button seal connection prevents wear and leakage of
the nozzle
.Manufactured from heat-treated stainless steel.
.Utilize Jetstream UHPX or UHP replaceable nozzle tips
.Maximum Operating Pressure: 40,000 psi (2,758 bar)
L D L D
H H
Part Number 53971: staggered 4-jewel pattern Part Number 53970: 3-jewel pattern
Assembly Maximum
Assembly Diameter Flats
Length Weight Inlet Operating
Part (D) (H)
(L) Connection* Pressure
Number
in mm in mm in mm lbs kg psi bar
53970 1.99 50.5 3.60 91.4 0.75 19.0 1.29 0.59 9/16" Button Seal 40,000 2,758
53971 1.90 48.3 3.37 85.6 0.75 19.0 1.16 0.53 9/16" Button Seal 40,000 2,758
* See Page H-4 for connection specifications.
86° SEAT
ANGLE
Product Description
.Economically designed replaceable sapphire nozzle RETAINER UHP NOZZLE
.Used in a variety of 40,000 psi products PART NUMBER 53502
86° SEAT
ANGLE
Product Description
.Premier high productivity sapphire nozzle SAPPHIRE ORIFICE
.Used in a variety of 40,000 psi applications
.Tapered orifice retainer reduces turbulence and provides
a cohesive, aggressive waterjet
UHPER-ABBCC
Nozzle Type
40,000 psi rated Jetstream "Ultra-High Pressure Evaporator"
Threads
L = Left Hand Threads
R = Right Hand Threads
Nozzle Size (A)
1 = 1/4" threaded nozzle body
2 = 3/8" threaded nozzle body
3 = 9/16" threaded nozzle body
See Nozzle Sizes chart (next page) for each nozzle specifications.
Example: 3 designates a nozzle that is 2.13" long by .75" diameter with a 9/16" HP connection.
Pattern (BB)
Select the two digit number corresponding to the desired pattern. See Patterns chart on the next page.
When sizing a nozzle, it is important to note that each pattern has a corresponding minimum flow rating
determined by the number of orifices in the pattern.
Example: 06 denotes a nozzle with 1 jet front, 3 jets drilled at the forward location, and 6 jets drilled at
the back location. This particular pattern is available only for nozzles with a flow rating number of 4 or greater.
Connection Type* 1/4" HP Lance Connection Type* 3/8" HP Lance Connection Type* 9/16" HP Lance
Outside Diameter .375 Outside Diameter .50 Outside Diameter .75
Overall Length 1.25 Overall Length 1.59 Overall Length 2.13
* Left hand or right hand threads must be specified when ordering. See page G-4 for connection specifications.
45º 45º
Nozzle Patterns
Use With Flexible or Rigid Lance Rigid Lance Only Radical
Pattern Number 01 02 03 04 05 06 07 08 09 10 11 12 13 14 Black Jets (C)
Number of Jets at Each Location Jets (D) Forward
Jet Locator
Jets (B)
Front Jets (A) 1 1 1 1 1 1 1 1 1 1 1 1 1
Forward Jets (B) 2 3 4
Radial Jets (C) 2 4 3 4 3 4 8 4
Front Jet (A)
Back Jets (D) 3 4 6 8 4 6 4 4 6
Total Jets 4 5 7 9 7 10 7 9 10 9 4 5 9 4
Minimum Flow Rating 0 1 2 3 2 4 2 3 4 3 0 1 3 0
PRESSURE GAUGE
Features
.6" high visibility face with laminated safety glass dial
cover
.Accurate within +/- 0.5% of full scale range
.Stainless steel case and internals
.Glycerin-filled for protection against pulsation
and vibration
.Blow-out back panel pressure relief in the event of
Bourdon tube failure for maximum safety
.Pointer zero adjustment
THREAD LUBRICANTS
Product description
Thread Lubricants prevent threaded connections
from galling together, or seizing up. Thread
lubricants are a necessary protection for all
40,000 psi threaded components.
MALE PORT TO
TYPE "M" MALE H
ADAPTERS
in mm in mm psi bar
53571 9/16" Type “M” Male 2.25 57.2 1.13 28.6 40,000 2,758
53570 7/8" Type “M” Male 2.50 63.5 1.13 28.6 40,000 2,758
Replacement Part
27502 O-Ring
H
MALE PORT TO
HIGH PRESSURE FEMALE
ADAPTERS
in mm in mm psi bar
54056 3/8" HP Female 2.09 69.9 1.13 28.6 40,000 2,758
53572 9/16" HP Female 2.25 57.2 1.50 38.1 40,000 2,758
Replacement Part
27502 O-Ring
MALE PORT TO
C
HIGH PRESSURE MALE
ADAPTERS
in mm in mm psi bar
54454 9/16" HP Male 3.68 93.5 1.38 34.9 40,000 2,758
Replacement Part
27502 O-Ring
in mm in mm psi bar
53573 Plug 1.75 44.5 1.13 28.6 40,000 2,758
Replacement Part
27502 O-Ring
in mm in mm in mm psi bar
53735 9/16" HP Male 5.09 129.3 1.13 28.7 1.50 38.1 40,000 2,758
Replacement Part
27502 O-Ring
L
in mm in mm psi bar
53671 9/16" Type “M” Male 2.64 67.1 1.25 31.8 40,000 2,758
53672 7/8" Type “M” Male 2.89 73.4 1.25 31.8 40,000 2,758
Replacement Parts
27536 Seal Ring
53592 Seal Backup Ring
27537 Seal Retaining Ring
in mm in mm psi bar
53989 3/8" HP Female 2.50 63.5 1.25 31.8 40,000 2,758
53988 9/16" HP Female 2.75 69.9 1.50 38.1 40,000 2,758
Replacement Parts
27536 Seal Ring
53592 Seal Backup Ring
27537 Seal Retaining Ring
L
in mm in mm psi bar
53589 Plug 1.89 48.0 .63* 15.9 40,000 2,758
* Allen wrench (hex key) socket. Wrench available below.
Replacement Parts
27536 Seal Ring
53592 Seal Backup Ring
27537 Seal Retaining Ring
26544 5/8" Hex Wrench
DURASAFE™ GUN TO
TYPE “M” MALE ADAPTERS H
Used to connect hoses having Type "M" female end fittings
to the Jetstream Durasafe 40,000 psi hand-held control guns.
C
Connection Type Length Flats Maximum Working
(C) (L) (H) Pressure
Part
Number
in mm in mm psi bar
53529 9/16" Type "M" Male 1.88 47.6 1.00 25.4 40,000 2,758
53468 7/8" Type "M" Male 2.00 50.8 1.00 25.4 40,000 2,758
DURASAFE™ GUN TO H
HIGH PRESSURE FEMALE ADAPTERS
Used to connect hoses having high pressure male end fittings to the
Jetstream Durasafe 40,000 psi hand-held control guns.
WEEP HOLE C
in mm in mm psi bar
53534 3/8" HP Female 1.75 44.5 1.00 25.4 40,000 2,758
54446 9/16" HP Female 2.10 53.3 1.25 31.8 40,000 2,758
L
TYPE “M” MALE TO H C2
HIGH PRESSURE MALE CONNECTORS
WEEP HOLE
(TYP.)
C
Maximum Working
Connection Type Dimensions Pressure
Part
Number A B C D
in mm in mm in mm in mm psi bar
28639 1/4" HP Female 2.00 50.8 1.50 38.1 1.00 25.4 .75 19.1 60,000 4,138
28163 3/8" HP Female 2.13 54.0 2.00 50.8 1.06 26.9 1.00 25.4 60,000 4,138
27839 9/16" HP Female 2.75 69.9 2.63 66.7 1.38 34.9 1.31 33.3 60,000 4,138
C
A
Maximum Working
Connection Type Dimensions Pressure
Part
Number A B C D
in mm in mm in mm in mm psi bar
28640 1/4" HP Female 1.38 34.9 2.00 50.8 .88 22.2 1.00 25.4 60,000 4,138
28164 3/8" HP Female 1.56 39.7 2.00 50.8 1.06 26.9 1.00 25.4 60,000 4,138
27838 9/16" HP Female 2.13 54.0 2.63 66.7 1.38 34.9 1.63 41.3 60,000 4,138
C
A
Maximum Working
Connection Type Dimensions Pressure
Part
Number A B C D
in mm in mm in mm in mm psi bar
28641 1/4" HP Female 1.50 38.1 1.38 34.9 1.00 25.4 .88 22.2 60,000 4,138
28165 3/8" HP Female 1.50 38.1 1.75 44.5 1.00 25.4 1.25 31.8 60,000 4,138
28166 9/16" HP Female 1.88 50.8 2.63 66.7 1.13 28.7 1.13 28.7 60,000 4,138
C1 C2
in mm in mm psi bar
28647 1/4" HP Female 1.38 34.9 .75 19.1 60,000 4,138
28648 3/8" HP Female 2.75 69.9 1.00 25.4 60,000 4,138
28649 9/16" HP Female 2.19 55.6 1.38 34.9 60,000 4,138
HIGH PRESSURE
GLAND NUTS,
COLLARS, AND
Collar
PLUGS Gland
Plug
COLLAR
COLLET
C1 C2
HIGH PRESSURE I.D. O.D.
NIPPLES
Maximum Working
Connection Type O.D. I.D.
Pressure
Part
Number
MALE CONNECTORS H C2
C1 H C2
HIGH PRESSURE MALE TO
FEMALE CONNECTORS
WEEP HOLE
SUPPORT COLLET
Maximum Working
Connection Type Dimensions
Pressure
Part
Number A Block
B C
Thickness
in mm in mm in mm in mm psi bar
28672 9/16" HP Female 2.88 73.0 3.00 76.2 1.50 38.1 1.75 44.5 60,000 4,138
54482 7/8" Type "M" Male 2.88 73.0 3.00 76.2 1.50 38.1 1.75 44.5 60,000 4,138
SLIMLINE LANCE
COUPLINGS C1 C2 C1 C2
Used to connect two lances together
without the use of glands and collars.
Test Results
NO Penetration occurred beyond protective system with
waterjet traveling at 8 ft/sec. (2.4 m/sec.), no closer than
3 in. (7.62 cm) at these conditions:
Efficiency Factor
Pressure Flow Rate Office ID O˚ Nozzle
psi gpm in
(mm)
Single
Orifice:
[ GPM/# of orifices
Orifice ID in2 ]
(bar) (lpm)
Pressure psi
Material
40,000 5.5 0.035
C (2,800) (21) (0.889)
Sapphire 22.4
36,000 5 0.035
Sapphire 21.5
(2,500) (19) (0.889)
B 20,000 11 0.051 Tungsten
(1,400) Carbide 29.9
(42) (1.295)
10,000 16 0.073 Tungsten
(700) (61) 30
(1.854) Carbide
1 2 3 4
5 6 7 8
10 11 12
13 14
in mm in mm in mm psi bar
54540 9/16" HP Ports 3.56 90.4 .25 6.4 1.25 31.8 40,000 2,758
53505 Jetstream 40K Port 3.70 94.0 .25 6.4 1.25 31.8 40,000 2,758
Maximum
Part Length Hose Connection* Hose I.D. Replacement Parts Operating
Number Pressure
ft m in mm Shroud Nut Whip Hose** psi bar
54640 6 1.8 7/8" Type “M” Female .32 8 28860 28861 27626-0064141 40,000 2,758
54645 6 1.8 9/16" Type “M” Female .20 5 28860 28861 27731-0063939 40,600 2,800
* See Page H-5 for a description of each connection type.
** Whip Hoses listed do not have abrasion or burst shield guards and are not intended for use near an operator without a safety shroud.
Maximum
Part Length Hose Connection* Hose I.D. Operating
Number Pressure
ft m in mm psi bar
27626-00641412 6 1.8 7/8" Type “M” Female .32 8 40,000 2,758
27731-00639392 6 1.8 9/16" Type “M” Female .20 5 40,600 2,800
* See Page H-5 for a description of each connection type.
Related Items
DURASAFETM CONTROL GUNS– See Control Guns & Valves, Pages B-10 & 11
HOSES – See Hoses & Lances, Pages C-1 & 3
FITTINGS – See Fittings, Section E
Jetstream of Houston, LLP Copyright Jetstream of Houston, LLP ©2003
Phone: US & Canada: 800-231-8192 or 713-462-7000 F-4
Web Site: www.waterblast.com
EXIT CONTENTS FRONT BACK NEXT
SURFACE CLEANERS
40,000 PSI
HYDRO-MOWERS
SCM SERIES
Features
.Available with or without direct vacuuming capabilities
.Self-rotating spray bar
.Adjustable nozzle height
Typical Applications
.Cleaning of oil and other deposits
.Removal of paints, deck coatings, rust, mastics,
laitance, adhesion inhibitors, renderings, etc.
.Brightening of thermoplastic flooring
.Scarifying of concrete and asphalt
Model SCM-40V
Product Description
.Specially designed for use in all Jetstream
Note: Always apply thread lubricant (anti-seize) to male threads
40,000 psi UNx manifold discharge ports
.No metal-to-metal seals which can wear and before assembling Jetstream 40K Pump Discharge connections to
prevent galling of threads. See Fittings, Page E-1, for available thread
require manifold replacement
lubricants.
Recommended Torque
Connection Thread
ft-lbs N-m
1" - 12UNF 75 102
Product Description
.Widely regarded as the industry standard connection for pressures
from 30,000 to 60,000 psi (2,069 to 4,138 bar)
.Rated working pressure is dependent upon inner diameter bore size
of tubing used. See HP Lance connection specs for rated working
pressure of high pressure tubing
. Connections exist in two different forms:
1. Used to connect high pressure tubing with a conical male seat
and left-handed threads to a female port using a gland nut and
left-hand threaded collar.
2. For many high pressure male fittings, the geometry of the gland,
collar, and tubing is combined into one component that connects
directly to a high pressure female port (Single-Piece Style).
. Suitable for repetitive connection/disconnection
Connection Instructions
1. 3-pc. Male Connection Style only – Liberally apply anti-seize to
male tubing threads to prevent thread galling.
2. 3-pc. Male Connection Style only – Slide gland nut over tubing and
thread collar (left-hand threaded) onto tubing until it is past the first
one or two full threads of the tubing.
3. Both styles – Liberally apply anti-seize to male connection threads
and male cone.
4. Both Styles – Install male connection into female port and tighten
according to torque specification in chart above.
Note: Always apply thread lubricant (anti-seize) to male threads before assembling High
Pressure connections to prevent galling of threads.
See Fittings, Page E-1, for available thread lubricants.
Product Description
.This connection has the same geometry and threads as a standard
high pressure tubing connection with the exception that right-hand
threaded tubes are available
. Male tubing is inserted directly into a female connection without the
use of a gland and collar
. Used in tube cleaning operations where standard connections are
too large in diameter
BUTTON SEAL
ACTUAL SIZE
Product Description Reference Chart
.Utilizes an inexpensive button-style
seal which absorbs abuse and wear,
preventing damage to the seating
surfaces of more costly components
. Used in the SP-40 Tornado Gun,
Multi-Mode Valve, and in some
automated lancing systems
Recommended Torque
Connection Thread
ft-lbs N-m
9/16"-18UNF 40 54
Product Description
. Designed for fast, simple connection of waterblast hoses and
lances
. Male conical seat protected from damage by the hose swivel nut
. Unlike high pressure connections, the seating surfaces do not
rotate against each other when connections are made, resulting in
a more reliable, longer lasting connection
PRODUCTS
Adapters Cartridges (cont’d)
See Fittings Unloader Valve, B-7 – 9
Air Control Hose, B-5 – 6, B-8 – 9 CD-ROMs
Air Tool Oil, B-5 – 6, B-8 – 9 The Advanced UNx Waterblast Pump, A-9
Air-Operated Diverter Valve, B-13 Waterblast Safety, F-2
Anti-Seize, Thread, E-1 Connection Types, H-2 – 5
Apparel, Safety, F-1 – 2 Connectors
Bags, Filter, A-19 See Fittings
Bareshaft Pumps Control Guns
See UNx Bareshaft Pumps DuraSafe Foot Gun, B-12
Bi-Mode Valve DuraSafe Hand Guns, B-10 – 11
See Tumble Boxes, Multi-Mode Foot, B-12
Blue Goop Thread Lubricant, E-1 Hand, B-1 – 2, B-10 – 11
Body Protection, F-1 – 2 Rotary, B-1 – 2
Boots, F-2 Tornado Gun, B-1 – 2
Bypass Valve Conversion Table, H-1
Cartridge, A-21 Couplings
Hand Adjustable, A-21 High Pressure Straight, E-9
Cartridges High Pressure Union, E-10
Bypass Valve, A-21 Lance, E-14
C-40 Dump Cartridge, B-7 – 9, B-10 – 13 Rigid Lance Holder, E-13
Diverter Valve, B-13 Crosses, High Pressure, E-8
DuraSafe Foot Gun, B-12 Diesel Units, A-3 – 4
DuraSafe Hand Guns, B-10 – 11 Differential Pressure Switch Package, A-20
Hydro-Throttle, A-18 Discs, Rupture, F-3
Multi-Mode, B-3, B-5 – 6 Diverter Valve, Air-Operated, B-13
Uni-Valve, A-11, A-13, A-15, A-17 DuraSafe Foot Gun, B-12
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
______________________________________________ ______________________________________________
Jetstream of Houston
4930 Cranswick
Houston, TX 77041
Phone: (713) 462-7000
Fax: (713) 462-5387
Toll Free: (800) 231-8192
www.waterblast.com
Copyright Jetstream of Houston, LLP ©2003