Вы находитесь на странице: 1из 3

Experimentation and Practical Skills Template: 4205CIV Hydraulics - Academic Year 2018 -2019

Student Name: Date: 08/04/2019

Skill Statement Criteria Investigation 1 Investigation 2 Investigation 3


(Evidence required) Centre of Pressure Venturi Meter Energy Loss Due to
Friction in a Pipeline
Achieved Initials Achieved Initials Achieved Initials
Y/N Y/N Y/N
To carry out experimentation in In all conducted experiments we yes Yes yes
such a way that a sufficient number use the standard procedures with
of accurate measurements are last versions equipment as well as
taken in order to produce the tests were repeated for many
meaningful results. times for obtain enough data with
a supervising by LJMU lab staff.

Perform the measurement of In some experiments the flow rate No, Not required Yes yes
volumetric flowrate using the was required, so we identify and
equipment competently. measure all the requirement to
investigate the flow rate.

Obtain a value for the average flow In some experiments the flow No, Not required Yes yes
velocity across a section of pipe. average velocity is required so, as a
team we measure all the required
data to calculate it.

Measure the pressure difference The manometer is available at the yes Yes (very necessary) No
between two points. State the laboratory, so in some experiments
arrangement used. we use it to identify the pressure
heads in some points such as inlet
and the outlet in order to use the
data to calculate the pressure
differences between them.

Experimentation and Practical Skills Template: 4205CIV Hydraulics - Academic Year 2018 -2019
Student Name: Date:

Skill Statement Criteria Investigation 1 Investigation 2 Investigation 3


(Evidence required) Centre of Pressure Venturi Meter Energy Loss Due to
Friction in a Pipeline
Achieved Initials Achieved Initials Achieved Initials
Y/N Y/N Y/N

Make, record and communicate All student records the yes Yes yes
reliable and valid observations and experimental investigation and
measurements with appropriate discuss the reason that lead to get
precision and accuracy. the data, all recorded data was
measured by either millimetre or
second to avoid the error and
mistakes.
Process raw data by carrying out After conducting the experiments yes Yes yes
appropriate calculations. the second stage was using these
data with the right equation in
order to determine the
requirements of each experiment.

Describe the trends and patterns in After making the calculation, each yes Yes yes
data, and where appropriate, use group member try to find a
specific values in the data to relationship between the
highlight significant features of the experiment variables and drawing
experiment. different graphs to show the
changes and observe the features
of the test.

Draw valid conclusions and use your The different graphs that drawing yes Yes yes
engineering knowledge and and the relationship between the
understanding to explain and justify variables need discussions, so
these conclusions. every member read and
understood all the experimental
conditions that lead to having the
specific values and in some case
they using the engineering
knowledge and sense to describe a
specific condition.

Вам также может понравиться