Академический Документы
Профессиональный Документы
Культура Документы
;
;;;
;;
;;;
;; ;
;;;;;;;
;;;; Table of Contents
About the Included Software ................................................. 3
• For Windows users ...................................................... 3
• For Macintosh users .................................................... 4
Installing the QY100 Data Filer .............................................. 5
• For Windows users ...................................................... 5
• For Macintosh users .................................................... 6
What is the QY100 Data Filer? ............................................... 8
How to start the QY100 Data Filer ...................................... 10
QY Data .................................................................................. 16
• Saving QY data to the Computer ............................... 16
• Transmitting data saved in the computer to the QY100 ..... 18
SMF Data ............................................................................... 22
• Saving QY100 Song data as SMF
(Standard MIDI File) data ............................................ 22
• Transmitting SMF data to the QY100 ......................... 25
QY Control ............................................................................. 27
Error Messages ...................................................................... 29
MIDI Manager (For Macintosh Users) ..................................... 31
● SPECIAL NOTICES
• The software and this owner’s manual are exclusive copyrights of Yamaha
Corporation.
• Copying of the software or reproduction of this manual in whole or in part by any
means is expressly forbidden without the written consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the
software and documentation and cannot be held responsible for the results of the
use of this manual and the software.
• This disk is a CD-ROM. Do not attempt to play the disk on an audio CD player.
Doing so may result in irreparable damage to your audio CD player.
• Copying of the commercially available music sequence data and/or digital audio files
is strictly prohibited except for your personal use.
• The company names and product names in this Owner’s Manual are the trade-
marks or registered trademarks of their respective companies.
• The screen displays as illustrated in this Owner’s Manual are for instructional
purposes, and may appear somewhat different from the screens which appear on
your computer.
• Future upgrades of application and system software and any changes in specifica-
tions and functions will be announced separately.
2
About the Included Software
Acrobat Reader
This software allows you to view the electronic Owner’s Manual saved in
PDF format.
To start the installation, open the “English” folder in the “Acroread” folder,
then dobule-click the “rs405eng.exe”. Follow the directions that appear on
your computer’s display to complete the installation procedure.
3
About the Included Software
MIDI Manager
This is a MIDI driver that is required when you connect the TO HOST
terminal of the QY100 directly to the modem or printer port on your
computer. You can choose between MIDI Manager and OMS for the driver
you will use.
OMS
This is a MIDI driver that is required when you connect the TO HOST
terminal of the QY100 directly to the modem or printer port on your
computer. You can choose between MIDI Manager and OMS for the driver
you will use.
Acrobat Reader
This software allows you to view the electronic Owner’s Manual saved in
PDF format.
To start the installation, open the “English” folder in the “Acrobat” folder,
then double-click “Reader Installer”. Follow the directions that appear on
your computer’s display to complete the installation procedure.
4
Installing
the QY100 Data Filer
■ NOTE
• In addition to the software installation, you need to install the appropri-
ate “MIDI driver” to use the QY100 Data Filer. Refer to the following
explanation to install the MIDI driver.
5
Installing the QY100 Data Filer
XAfter the icon for the CD-ROM disc appears on your monitor,
open the CD-ROM icon with a double click. Open the “QY100”
folder in the “International” folder with double-clicks.
CDrag the “QY100 Data Filer” to the hard disk to copy the file.
6
Installing the QY100 Data Filer
■ NOTE
• About the “MIDI Manager”, refer to the QY100 Data Filer Owner's
Manual page 31.
BDouble click the “Install OMS 2.3.6” icon and the installer will
start up. After setting “Install Location” (if required), click the
“Install” to start the installation.
■ NOTE
• To use OMS, it is also necessary to set up OMS (page 14).
For more information about OMS, refer to the “OMS_2.3_Mac.pdf” file
in the supplied CD-ROM.
7
What is
the QY100 Data Filer?
The QY100 Data Filer is a file manager that allows you take
data created by the QY100 and save it in your computer. Before you
can use the QY100 Data Filer, you must install the software, and
connect the QY100 to your computer (refer to the “QY100 Owner’s
Manual”).
The QY100 Data Filer can perform the following three functions
depending upon how you use it:
1. Data created by the QY100 can be saved to your computer
as QY bulk data. Also, QY bulk data saved in your computer
can be transmitted to the QY100.
2. SMF song data files such as XG or GM song data can be
transmitted from the computer to your QY100 to be played
back on the QY100. Also, data created by the QY100 can be
saved to your computer as an SMF song.
3. Song/Style data in the QY100 can be cleared via the com-
puter.
■ NOTE
• The QY100 Data Filer is an application designed specifically for the QY100. It
cannot be used with any other devices.
nd receive QY b
mit a ul k
Trans da
ta
1 .
3. C
le a r Q Y 1 0 0 d ata
8
What is the QY100 Data Filer?
Computer ➔ QY100
• A bulk file saved in the computer can be transmitted to the
QY100.
• Single Song data within a bulk file saved in the computer can
be transmitted to the QY100.
• Single User Style data within a bulk file saved in the computer
can be transmitted to the QY100.
Computer ➔ QY100
• SMF (Standard MIDI File) data saved in the computer can be
transmitted to the QY100.
9
How to start
the QY100 Data Filer
Z Start the QY100 Data Filer.
After installation (refer to page 5) and connection (refer to the
“QY100 Owner’s Manual”) are completed, follow the instructions below to
start up the QY100 Data Filer.
■ NOTE
• If you use the QY100 Data Filer on a Macintosh System, open the “Chooser” in the
“Apple Menu” and turn off “Apple Talk”.
■ CAUTION
• If the MIDI Driver cannot be used with your computer, the following message will
be displayed.
“The selected MIDI device is in use. Quit any applications using the device.”
→ Click “OK”, then quit all other MIDI applications (sequencer software, etc.) that
use the MIDI driver, and start the QY100 Data Filer once again.
“Can’t find the MIDI device. Confirm the MIDI device settings.”
→ The MIDI driver is not properly installed. Refer to the “QY100 Owner’s Manual”
and install the MIDI Driver.
■ CAUTION
• If the QY100 is not properly connected to your computer, “Data transfer failed.
Confirm QY100 connections (HOST SELECT switch, etc.)” dialog box will be
displayed. Properly connect the QY100, confirm the HOST SELECT switch position,
and start the software again.
10
How to start the QY100 Data Filer
“Send” “Send”
A bulk file as well as its single Single SMF data saved in the
Song and Style files saved in computer can be transmitted to
the computer can be transmit- the QY100. (Refer to page 25.)
ted to the QY100. (Refer to
page 18.)
QY CONTROL
“Ctrl”
The QY100’s Song/User Style
name list can be viewed on the
computer display, single or all
Songs/User Styles in the list can
be cleared. (Refer to page 27.)
11
How to start the QY100 Data Filer
Windows:
Selects the MIDI driver that is required to exchange
data (Bulk Dump) between the QY100 and the
computer.
Macintosh:
Selects the MIDI Driver (“MIDI Manager” or
“OMS”). If you select “OMS” here, the following
settings is also necessary.
Starts up “OMS Setup”, then selects the OMS
setup file.
Selects the external port.
Selects the devices.
Windows:
Opens the PDF manual file.
12
How to start the QY100 Data Filer
C Click “OK”.
■ NOTE
• To select the MIDI driver, the required MIDI driver needs be previously installed.
13
How to start the QY100 Data Filer
C Click “OK”.
14
How to start the QY100 Data Filer
< Select “Device Setup...” from the “Setup” Menu, and the
“Devices” dialog box appears. Select “QY100” as “Out-
put Device” and “Input Device” by clicking twice each
box , then click “OK”.
■ NOTE
• When you select “QY100” from the boxes, click just above the “QY100” display
after clicking the boxes to display the pop-up menu.
15
QY Data
QY100
QY Bulk Data Received
Computer
■ NOTE
• It is not necessary to perform a bulk dump operation from the QY100.
16
QY Data
X Enter the file name and select the directory for where
you want to save the bulk file.
V Click “Start” and the bulk data from the QY100 will be
transmitted to the computer.
When reception is complete, “The QY100 bulk file has
been created” message is displayed.
■ NOTE
• If you attempt to operate the QY100 before returning to the top display,
the “Now Bulk Mode” message will appear on the QY’s LCD and the
operation will be rejected.
17
QY Data
Computer
■ NOTE
Pay attention to the following points when you transmit bulk data from the computer.
• Stop any playback or recording operations on the QY100.
• To transmit data to the QY100, change the QY100’s display to the SONG play
display or the PATTERN play display before transmitting data.
18
QY Data
■ NOTE
• If you select “All”, all Songs, all User Styles, as well as system setup
data (including amp simulator data) in the QY100 will be overwritten
(erased) with data transmitted by the computer.
19
QY Data
■ NOTE
• Used Memory display (in % unit) may not be accurate numerically in
some cases. Grasp them as rough evaluations.
20
QY Data
Select the Song/User Style file to be transmitted in the left box, then
select the destination (QY100’s Song/User Style number) in the right box.
■ NOTE
• If the destination Song/User Style number contains a Song or User Style, the
bulk transmission from the computer will overwrite that data (erase).
Click “Send”, and the “Ready for data transfer” message will be
displayed. Move on to step B.
■ NOTE
• If you attempt to operate the QY100 before returning to the top display, the “Now Bulk
Mode” message will appear on the QY’s LCD and the operation will be rejected.
21
SMF Data
Computer
QY100 QY Song Bulk data
received
■ NOTE
• If you want to save a song contains data in the pattern track (Pt) and chord track
(Cd) as SMF data, execute the “Expand Backing” job previously.
What is SMF?
SMF (Standard MIDI File) was developed to allow the
exchange of a common type of song data between differ-
ent types of sequencers. Many software/hardware manu-
factures make SMF compatible sequencers.
By saving data with the QY100 Data Filer to SMF data, you
can use data created by the QY100 in normal SMF se-
quencers for playback, and edit the data as well.
22
SMF Data
C Click “Convert”.
The following dialog box appears and asks you if you want
to add an XG voice data header to the SMF file.
23
SMF Data
V Enter the SMF data’s file name and select the directory
for where you want to save the data.
N Click “Start”
Song data will be received. When reception is complete,
the song data will be automatically converted to SMF data.
■ NOTE
• If you attempt to operate the QY100 before returning to the top display,
the “Now Bulk Mode” message will appear on the QY’s LCD and the
operation will be rejected.
24
SMF Data
■ NOTE
When Song data is transmitted from the computer, pay attention to the following
points.
• Stop Record and Playback operations on the QY100.
• If you transmit SONG data to the QY100, change the QY100’s display to the
SONG/PATTERN play display before transmitting data.
25
SMF Data
■ NOTE
• If the destination song number
already contains a song, that
song will be overwritten
(erased) with data that is
transmitted from the computer.
■ NOTE
• QY100 Free Memory display (in % unit) may not be accurate numerically in some cases.
Grasp them as rough evaluations.
■ NOTE
• If you attempt to operate the QY100 before returning to the top display, the “Now Bulk
Mode” message will appear on the QY’s LCD and the operation will be rejected.
26
QY Control
The “QY Control” dialog box opens and the QY100’s Song
list is displayed.
27
QY Control
• To Clear a Song
Click to select a Song in the Song list, then click “CLEAR
SONG” to erase the song.
Click on “CLEAR ALL SONGS” to erase all songs (01-20).
• To Clear a User Style
Click “USER STYLE” and the QY100’s User Style list (U01-
U64) is displayed.
■ NOTE
• If you attempt to operate the QY100 before returning to the top display,
the “Now Bulk Mode” message will appear on the QY’s LCD and the
operation will be rejected.
28
Error Messages
■ “The selected MIDI device is in use. Quit any applica-
tions using the device.”
When the QY100 Data Filer starts up and the MIDI driver is currently
being used by another application, this message is displayed.
Click “OK”, quit any applications that are using the MIDI driver, and
start the QY100 Data Filer again.
29
Error Messages
30
MIDI Manager
31
MIDI Manager
* When you want to use the QY100 Data Filer, open the “Chooser” in
the Apple menu and turn off Apple Talk.
* To access information about PatchBay, from the Apple menu, select
“About PatchBay”.
32
MIDI Manager
When you copy the entire contents of the “MIDI Manager 2.0.2”
folder in the supplied CD-ROM to the Macintosh System folder (as
described on page 6), the “Serial Switch” will be installed automati-
cally into the Control Panels folder.
■ NOTE
• “Cache Switch” is necessary for configuring the systems of some
Quadra models. You will find “Cache Switch” in the System disk
called “Tidbits”. Copy it into the System Folder. After copying it into
the System Folder, pull down the Apple menu and select “Control
Panels”. Set the serial port of the “IIfx Serial Switch” to “Compat-
ible”. If you are using a Quadra with the different serial port
configuration, set the “Cache Switch” to “More Compatible”.
When using such a Quadra and the screen message “Cannot use
with this Macintosh” appears, the above settings will not be
required.
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
010PO-01A0 © 2000 Yamaha Corporation
33