Академический Документы
Профессиональный Документы
Культура Документы
Гидроприводом
2007
DIRECTIONAL CONTROL VALVES
CONTENTS
A range of cartridge solenoid valves with flows up to 100 litres/min (26 US GPM) and pressures up to
350 bar (5000 psi), including a variety of poppet and spool solutions.
SELECTION
S205 N.O. 2-way, 2-position poppet 210 bar (3000 psi); 1 litre/min (0.25 US GPM) 11-1611
S206 N.C. 2-way, 2-position poppet 210 bar (3000 psi); 1 litre/min (0.25 US GPM) 11-1611
11 S207
S607
N.O. 2-way, 2-position poppet
N.O. 2-way, 2-position poppet
350 bar (5000 psi); 1 litre/min (0.25 US GPM)
250 bar (3600 psi); 100 litres/min (26 US GPM)
11-1711
11-1811
S608 N.C. 2-way, 2-position poppet 250 bar (3600 psi); 100 litres/min (26 US GPM) 11-1811
S210 N.O. 2-way, 2-position spool 210 bar (3000 psi); 20 litres/min (5 US GPM) 11-1911
S510(H) N.O. 2-way, 2-position spool 210 bar (3000 psi); 25 litres/min (6.5 US GPM) 11-2011
S211 N.C. 2-way, 2-position spool 210 bar (3000 psi); 20 litres/min (5 US GPM) 11-1911
S511(H) N.C. 2-way, 2-position spool 210 bar (3000 psi); 25 litres/min (6.5 US GPM) 11-2011
S612 N.O. 2-way, 2-position spool 250 bar (3600 psi); 100 litres/min (26 US GPM) 11-1811
S613 N.C. 2-way, 2-position spool 250 bar (3600 psi); 100 litres/min (26 US GPM) 11-1811
S215 N.C. 2-way, 2 position poppet 210 bar (3000 psi); 1 litre/min (0.26 US GPM) 11-2051
S217(H) N.C. 2-way, 2 position poppet 210 bar (3000 psi); 20 litres/min (5 US GPM) 11-2071
S217A N.C. 2-way, 2 position poppet 210 bar (3000 psi); 10 litres/min (2.6 US GPM) 11-2073
S717 N.C. 2-way, 2 position poppet 350 bar (5000 psi); 90 litres/min (24 US GPM) 11-2091
S716 N.O. 2-way, 2 position poppet 350 bar (5000 psi); 90 litres/min (24 US GPM) 11-2091
S220(H) 3-way, 2-position spool 210 bar (3000 psi); 14 litres/min (3.7 US GPM) 11-2111
S520(H) 3-way, 2-position spool 210 bar (3000 psi); 40 litres/min (10 US GPM) 11-2211
S221(H) 3-way, 2-position spool 210 bar (3000 psi); 20 litres/min (5 US GPM) 11-2311
S521(H) 3-way, 2-position spool 210 bar (3000 psi); 44 litres/min (11.5 US GPM) 11-2411
S222 3-way, 2-position spool 100 bar (1500 psi); 20 litres/min (5 US GPM) 11-2511
S228 3-way, 2-position spool 50 bar (750 psi); 15 litres/min (4 US GPM) 11-2721
S229 3-way, 2-position poppet 210 bar (3000 psi); 12 litres/min (3 US GPM) 11-2731
S525(H) 3-way, 2-position spool 210 bar (3000 psi); 30 litres/min (8 US GPM) 11-2611
S526 3-way, 2-position spool 210 bar (3000 psi); 35 litres/min (9 US GPM) 11-2711
S240 4-way, 2-position spool 210 bar (3000 psi); 18 litres/min (4.7 US GPM) 11-2811
S241 4-way, 2-position spool 210 bar (3000 psi); 20 litres/min (5 US GPM) 11-2911
S541 4-way, 2-position spool 210 bar (3000 psi); 30 litres/min (8 US GPM) 11-3011
S242(H) 4-way, 2-position spool 210 bar (3000 psi); 15 litres/min (4 US GPM) 11-3111
S542 4-way, 2-position spool 210 bar (3000 psi); 35 litres/min (9 US GPM) 11-3211
S270 4-way, 3-position spool 210 bar (3000 psi); 13 litres/min (3.5 US GPM) 11-3311
S570 4-way, 3-position spool 210 bar (3000 psi); 35 litres/min (9 US GPM) 11-3411
S271 4-way, 3-position spool 210 bar (3000 psi); 14 litres/min (3.7 US GPM) 11-3511
S571 4-way, 3-position spool 210 bar (3000 psi); 34 litres/min (8.7 US GPM) 11-3611
S272 4-way, 3-position spool 210 bar (3000 psi); 14 litres/min (3.7 US GPM) 11-3711
S572 4-way, 3-position spool 210 bar (3000 psi); 34 litres/min (8.7 US GPM) 11-3811
S274 4-way, 3-position spool 210 bar (3000 psi); 14 litres/min (3.7 US GPM) 11-3911
S574 4-way, 3-position spool 210 bar (3000 psi); 34 litres/min (8.7 US GPM) 11-4011
S277 4-way, 3-position spool 210 bar (3000 psi); 11.5 litres/min (3.1 US GPM) 11-4111
S577R 4-way, 3-position spool 210 bar (3000 psi); 27 litres/min (7 US GPM) 11-4211
PDR21A Proportional Pressure relief 350 bar (5000 psi) 1.5 litres/min (0.3 US GPM) 11/2-151
PPD22A(H) Proportional Pressure reducer 210 bar (3000 psi); 20 litres/min (5.4 US GPM) 11/5-105 11
PFR24A Proportional Flow Control 210 bar (3000 psi); 18 litres/min (4.7 US GPM) 11/9-121
Note. When using these valves in conjunction with a PLC and there is a possibility of a residual voltage please
contact the factory with application information to ensure safe operation of the product.
S206
S202 S571
49.0
47.8
50.0
38,1
23.9 22.0
36.0
35.5
11
C16 H 24 19
Coil Series Wattage
13 = 13 mm tube C13 C16
16 = 16 mm tube 14 = 14 Watt 19 = 19 Watt
22 = 22 Watt 29 = 29 Watt
27 = 27 Watt
Connection
H = DIN43650 ISO Standard
F = Flying Leads (12 and 24 VDC only) Voltage
DM = Deutsch Moulded (12 and 24 VDC only) 12 = 12 VDC 110 = 110 VRAC
(Consult factory for other options) 24 = 24 VDC 220 = 220 VRAC*
*220 to 240 VAC
All AC coils must be used with a
rectifying connector:-
(AXP9997-115 or AXP9997-230)
(Other voltages available on request)
11-1022.C
MANUAL OVERRIDES
ø 11.00
24.50
21.30
Nut type
dependent on
valve
ø 8.1
ø 11.00
18.70
16.20
Nut type
24.50
dependent on
20.00
valve
Nut type
dependent on
valve
11
MANUALLY OPERATED NORMAL POSITION NORMAL POSITION MANUALLY OPERATED
POSITION POSITION
Ø 20.00 NUT
26.50
26.50
21.00
22.30
Ø 11.00 KNOB
46.50
FLUSH Push to manually Override
40.50
Nut type
dependent on
valve 10.00 A/F HEX
Ø 24.00 NUT
11
Nut type
dependent on
valve
11-1032.A
S201 / S202 Directional Control Valve - 2-Way, 2-Position Poppet
PRESSURE (PSI)
PRESSURE (PSI)
9 130
Torque into Cavity 20 Nm (15 lbs ft)
1-2 De-energised Electrical Data See coil data sheet
6 90
2-1 Energised Line Body Material Aluminium Alloy
1-2 Energised
3 45
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
BASIC CODE: S201 (Normally Open) BASIC CODE: S201 (Normally Open)
Body ONLY part numbers
BSP, aluminium SAE, aluminium BSP, steel SAE, steel
1/4” A1485
3/8” A1043 3/8” A15676 3/8” A14175 3/8” A14843
50.00
48.00
23.50 36.00
59.00
38.50
2 HOLES
ø6.8 THRO'
12.80
24.00 A/F 2
50.80
8.25
27.30
3/4"-16-UNF-2A 1
22.00
2
6.00
ø12.60
15.90
16.00
6.00 31.80
19.00
BASIC CODE: S202 (Normally Closed) BASIC CODE: S202 (Normally Closed)
Body ONLY part numbers
BSP, aluminium SAE, aluminium BSP, steel SAE, steel
1/4” A1485
3/8” A1043 3/8” A15676 3/8” A14175 3/8” A14843
50.00
48.00
23.50 36.00
11
55.50
38.50
2 HOLES
ø6.8 THRO'
2
12.80
50.80
24.00 A/F
9.55
1
27.30
3/4"-16-UNF-2A
22.00
2
6.00
ø12.60 1 15.90
16.00
6.00 31.80
19.00
S201 N H 24 3W
Basic Code Port Sizes
S201 = (normally open) 2W = 1/4” BSP
S202 = (normally closed) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability) Coil Termination
1 = Push and twist (S202 Only) H = DIN43650
2 = Screw (S201 & S202) F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-1112.B
S501 / S502 Directional Control Valve - 2-Way, 2-Position Poppet
Viscosity = 32 cSt (150 SSU) Max. Working Pressure 210 bar (3000 psi)
Flow Rating 60 litres/min (16 US GPM)
S501 (Normally Open)
FLOW (US GPM)
Nominal Flow 60 litres/min (16 US GPM)
2.5 5 7.5 10 12.5 15
(at Delta P = 5 bar (70 psi))
15 210
PRESSURE (PSI)
9 130
Temperature Range -20 to +120°C (-4 to +248°F)
1-2 Energised
6 90 Nominal Viscosity Range 15 to 250 centistokes
3 45
Recommended Filtration BS5540/4 18/13 (25 micron or better)
2-1 De-energised
1-2 De-energised
0 Fluid Compatible with most general
0
0 10 20 30 40 50 60 purpose hydraulic fluids
FLOW (LITRES/MIN)
Seal Material Standard nitrile with PTFE back up rings
S502 (Normally Closed) Seal Kit Number SK1028 (Nitrile) SK1028V (Viton)
PRESSURE (PSI)
50.00
18.50
27.00 A/F
38.10
2
11.00
50.80
32.40
7/8"-14-UNF-2A
2 1
7.10
1
ø15.80
19.10 16.00
50.00
11
18.50
38.10
2
25.40 A/F
8.30
50.80
32.40
7/8"-14-UNF-2A 1
2
7.10
1 19.10 16.00
ø15.80
3.15 41.30 31.80
S501 N H 24 3W
Basic Code Port Sizes
S501 = (normally open) 3W = 3/8” BSP
S502 = (normally closed) 4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-1212.B
S701 / S702 Directional Control Valve - 2-Way, 2-Position Poppet
Symbol
1 1
PRESSURE DROP v’s FLOW Max. Pressure 210 bar (3000 psi)
Viscosity = 32 cSt (150 SSU) Flow Rating 100 litres/min (26 US GPM)
11
FLOW-US GPM
0 5 10 15 20 25 30 0.6 ml/min (10 dpm)
25 Internal Leakage
210 bar differential at 32 centistokes
300
20
PRESSURE-BAR
PRESSURE-PSI
PRESSURE-PSI
1-2 De-Energised
15
200
Cavity Number A21473
1-2 Energised
10 Torque into Cavity 60 Nm (44 lbs ft)
100
5 Electrical Data See coil data sheet
2-1 Energised
0 Line Body Material Aluminium Alloy
0 20 40 60 80 100 120
FLOW LITRES/MIN
BASIC CODE: S701 (Normally Open) BASIC CODE: S701 (Normally Open)
Body ONLY part numbers
BSP, aluminium SAE, aluminium BSP, steel SAE, steel
3/4” B22258 3/4” B22260 3/4” B22262 3/4” B22264
CT1
28.50
76.20
63.50
88.90
32.00
13.00
A/F 2
HEX
45.50
1-1/16"
-12-UN 2 1
2 HOLES
Ø10.50 THRO'
44.50 25.40
Ø 23.70 1 63.50 12.70 50.80
BASIC CODE: S702 (Normally Closed) BASIC CODE: S702 (Normally Closed)
Body ONLY part numbers
BSP, aluminium SAE, aluminium BSP, steel SAE, steel
3/4” B22258 3/4” B22260 3/4” B22262 3/4” B22264
49.00 35.50
88.90
22.00 Ø 24.00
11
50.00
69.10
CT1
28.50
76.20
63.50
88.90
32.00 A/F
HEX 2
12.10
45.50
1-1/16"
-12-UN
2 1
2 HOLES
Ø10.50 THRO'
44.50 25.40
Ø 23.70 1 63.50 12.70 50.80
S701 N H 24 6W
Basic Code Port Sizes
S701 = (normally open) 6W = 3/4” BSP 12T = 3/4” SAE
S702 = (normally closed) Voltage
Seals 12 = 12 VDC 110 = 110 VAC
N = Nitrile 24 = 24 VDC 220 = 220 VAC
V = Viton
Coil Termination
Manual Override (consult factory for availability) H = DIN43650
1 = Push and twist (S702 Only) F = Flying Leads
2 = Screw (S701 & S702) DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-1256.B
S901 / S902 Directional Control Valve
2-Way, 2-Position Poppet
160 litres/min (42 US GPM) 250bar (3600 PSI)
Viscosity = 32 cSt (150 SSU) Max. Working Pressure 250 bar (3600 psi)
PRESSURE-PSI
12
150
Temperature Range -20 to +120°C (-4 to +248°F)
9
Nominal Viscosity Range 15 to 250 centistokes
100
6 Recommended Filtration BS5540/4 18/13 (25 micron or better)
1-2 Energised Compatible with most general
3 50 Fluid
2-1 &1-2 De-energised purpose hydraulic fluids
0 30 60 90 120 150 180 210 Seal Material Standard nitrile with PTFE back up rings
FLOW-LITRES/MIN Seal Kit Number SK1160 (Nitrile) SK1160 (Viton)
S902 (Normally Closed) Mounting Position Unrestricted
FLOW-US GPM
18
10 20 30 40 50 Cartridge Weight 0.4 kg (0.9 lbs)
250
Coil Weight 0.3 kg (0.6 lbs)
15
200
Cavity Number A21616 (See Section 17)
PRESSURE-BAR
PRESSURE-PSI
12
150
Torque into Cavity 100 Nm (74 lbs ft)
9
Electrical Data See coil data sheet
100
6 Line Body Material Aluminium Alloy (up to 210 bar*)
2-1 Energised
50
3 *For applications above 210 bar please consult our
1-2 Energised
1-2 De-energised technical department or use the steel body option.
0 30 60 90 120 150 180 210
FLOW-LITRES/MIN
50.00
25.00
2
38.00 A/F
57.25
13.00
HEX
76.20
8.70
45.50
2
THREAD
1
1-5/16"-12-UN
11
25.00
2
38.00 A/F
57.25
12.10
HEX
76.20
8.70
45.50
1-5/16"-12-UN
THREAD 2
1
S901 N H 24 6W
Basic Code Port Sizes
S901 = (normally open) 6W = 3/4” BSP
S902 = (normally closed) 8W = 1” BSP 16T = 1” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-1276.B
S600 / S609 Directional Control Valve - 2-Way, 2-Position Poppet
APPLICATION
To give on-off control of flows up to 100 litres/min (26
US GPM) and pressures up to 250 bar (3600 psi).
SPECIFICATIONS
Part Number: C13-*-*/14 Max. Working Pressure 250 bar (3600 psi)
Flow Rating 100 litres/min (26 US GPM)
Voltage available: 12, 24 VDC
110, 220 VAC* Nominal Flow 60 litres/min (16 US GPM)
(at Delta P = 5 bar (70 psi))
* AC coils must be used with a rectifying connector.
11 Internal Leakage
0.6 ml/min (10 dpm)
210 bar differential at 32 centistokes
PRESSURE (PSI)
*For applications above 210 bar please consult our technical department or use the steel body option.
NORMALLY CLOSED
S609 (Normally Closed)
NORMALLY OPEN
53.90
51.40
38.50
32.00 A/F
7.40
1"-14-UNS-2A
56.70
ø19.00 1
25.4
TORQUE
3.4Nm TORQUE
3.4Nm
2 HOLES
ø8.7 THRO'
12.7
13.00
35.0
35.00
2
71.4
2
50.80
11
89.00
92.0
1 1 1
1
2 HOLES
ø9.0 THRO'
2 WAY POPPET • 300 litres/min (80 US GPM) • 210 bar (3000 psi)
7SP300
INLET 2
1 OUTLET
APPLICATION SPECIFICATIONS
To give on-off control of flows of 300 litres/min (80 US Figures based on: Oil Temp = 40°C Viscosity = 40 cSt
GPM) and pressures up to 210 bar (3000 psi) in any
hydraulic system. Can also be used as a high capacity,
Rated Flow 300 litres/min (80 US GPM)
fast acting, dump valve.
(80 US GPM) with a low pressure drop. Weight (exc. coil) 1.90 kg (4.18 lbs)
20 300
PRESSURE-BAR
PRESSURE-PSI
15
200
10
100
5
0
0 100 200 300
FLOW LITRES/MIN
22.0
9.5
43.0
71.0
2
95.0
76.5
1 SOLENOID CARTRIDGE
S201 / S202
(SEE PAGE 11-1111)
11
28.0
20.0
31.8
50.8
52.0
92.1
63.5
7SP300 1 6W H 24 S
Basic Code Seals
7SP300 = Complete valve S = Nitrile (For use with most
industrial hydraulic oils)
Solenoid Configuration SV = Viton (For high temperature
1 = Normally open and most special fluid
2 = Normally closed applications)
Port Sizes - Bodied Valves Only
6W = 3/4” BSP Coil Voltage
8W = 1” BSP 16T = 1” SAE 12 = 12VDC
24 = 24VDC
Coil Termination 110 = 110VAC 50 Hz
H = ISO4400 (plug included) 220 = 220VAC 50 Hz
F = Flying Leads DC only Other voltages available
DM = Deutsch Moulded on request
Other terminations available on request We reserve the right to change specifications without notice
11-1352.B
SX203 / SX204 Directional Control Valve - 2-Way, 2-Position
Poppet
20 litres/min (5 US GPM) 350 bar (5000 PSI)
PRESSURE (PSI)
12 175
1-2 Energised
Torque Cartridge into
9 130
30 Nm (22 lbs ft)
Cavity
6 90
2-1 De-energised
3 45
Weight (exc. coil) 0.08 kg (0.18lbs)
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
FLOW (US GPM)
Seal Kit Number SK1043 (Nitrile) SK1043V (Viton)
1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4
15 210 Recommended BS5540/4 (25 micron nominal)
SX204 (350 bar) 12 175
Filtration Level Class 18/13
(Normally Closed)
PRESSURE (BAR)
PRESSURE (PSI)
0 0
Nominal Viscosity 5 to 500 cSt
0 5 10 15 20 25 30 35 40 Range
FLOW (LITRES/MIN)
*For applications above 210 bar please consult our technical department or use the steel body option.
Integrated Hydraulics Ltd Integrated Hydraulics Inc
Collins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK. 7047 Spinach Drive, Mentor, Ohio 44060, USA
Tel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170
Website: www.integratedhydraulics.com Website: www.integratedhydraulics.com
11-1431.A
CARTRIDGE ONLY COMPLETE VALVE 1/4” 3/8” PORTS
BASIC CODE: SX203 (Normally Open) 280 bar BASIC CODE: SX203 (Normally Open) 280 bar
Body ONLY part numbers
BSP, aluminium SAE, aluminium BSP, steel SAE, steel
1/4” A1485
3/8” A1043 3/8” A15676 3/8” A14175 3/8” A14843
48.00 50.00
23.50 36.00
59.00
38.50
2 HOLES
ø6.8 THRO'
24.00 A/F
12.80
8.25
50.80
27.30
3/4"-16-UNF-2A
2 1
22.00
ø12.60 1
6.00
15.90
16.00
6.00 31.80
19.00
23.50 36.00
55.50
38.50
2
2 HOLES
ø6.8 THRO'
11
12.80
24.00 A/F
50.80
9.55
27.30
3/4"-16-UNF-2A 1
22.00
1
6.00
ø12.60 15.90
16.00
6.00 31.80
19.00
SX*** N H 24 3W
Basic Code Port Sizes
SX203 = (normally open) 280 bar 2W = 1/4” BSP
SX204 = (normally closed) 350 bar 3W = 3/8” BSP 6T = 3/8” SAE
Voltage
Seals 12 = 12 VDC 110 = 110 VAC
N = Nitrile 24 = 24 VDC 220 = 220 VAC
V = Viton
Coil Termination
Manual Override (consult factory for availability) H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-1432.C
S205 / S206 Directional Control Valve - 2-Way, 2-Position Poppet
APPLICATION
To give on-off control of flows up to 1 litre/min (0.25 US
GPM) and pressures up to 210 bar (3000 psi). Typical
usage includes the control of the pilot or vent flow of SPECIFICATIONS
another valve, for example a ventable relief valve. (See
Section 2). S205 (N.O.) S206 (N.C.)
Basic Model Code
2 2
11 * AC coils must be used with a rectifying connector. Internal Leakage 0.3 ml/min (5 dpm) when closed
210 bar differential at 32 centistokes
PRESSURE-PSI
38.50
2 HOLES
ø6.8 THRO'
24.00 A/F
12.80
2
50.80
9.55
27.30
3/4"-16-UNF-2A
2 1
22.00
1
ø12.60
6.00
15.90
16.00
6.00 31.80
19.00
38.50
24.00 A/F 2
2 HOLES
ø6.8 THRO'
11
9.55
12.80
50.80
27.30
3/4"-16-UNF-2A
2
1
22.00
1
ø12.60
6.00
15.90
16.00
6.00 31.80
19.00
S205 N H 24 3W
Basic Code Port Sizes
S205 = (normally open) 2W = 1/4” BSP
S206 = (normally closed) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-1612.B
S207 Directional Control Valve - 2-Way, 2-Position Poppet
S207 FEATURES
NORMALLY OPEN Pilot flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
APPLICATION
To give on-off control of flows up to1 litre/min (0.25 US
GPM) and pressures up to 350 bar (5000 psi). Typical
usage includes the control of the pilot or vent flow of
another valve, for example a ventable relief valve.
(See Section 2). SPECIFICATIONS
NOTE: This valve can be used to vent systems at
pressures up to 350 bar (5000 psi) on the Basic Model Code S207
inlet port but pressure on the outlet port 1
should be limited to 210 bar (3000 psi).
Symbol
2
COIL INFORMATION
210 bar (3000 psi) - Port 2
(See Page 11-1021) Max. Working Pressure
350 bar (5000 psi) - Port 1
Nominal Flow
Voltage available: 12, 24 VDC 1 litre/min (0.25 US GPM)
PRESSURE-PSI
60
Cavity Number A879 (See page 11-441)
4
Torque into Cavity 20 Nm (15 lbs ft)
2
Electrical Data See coil data sheet
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Line Body Material Aluminium Alloy (up to 210 bar*)
FLOW LITRES/MIN
*For applications above 210 bar please consult our technical department or use the steel body option.
23.50 36.00
59.00
38.50
24.00 A/F
8.25
27.30
3/4"-16-UNF-2A
2
1
ø12.60
2 HOLES
ø6.8 THRO'
12.80
2
50.80
1 11
22.00
6.00
15.90
16.00
6.00 31.80
19.00
S207 V H 24 3W
Basic Code Port Sizes
S207 = (normally open) 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
V = Viton Voltage
12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-1712.C
S607 / S608 & S612 / S613 Directional Control Valve
2-Way, 2-Position Poppet/Spool
100 litres/min (26 US GPM) 250 bar (3600 PSI)
1 1
Symbol
APPLICATION S612 S613
2 2
To give on-off control of flows up to 100 litres/min (26
US GPM) and pressures up to 250 bar (3600 psi). 1 1
11 Part Number:
Internal Leakage
S607/S608: 0.6 ml/min (10 dpm)
S612/S613: Less than 60 ml/min
110, 220 VAC* 210 bar differential at 32 centistokes
* AC coils must be used with a rectifying connector. Temperature Range -20 to +120°C (-4 to +248°F)
Nominal Viscosity Range 15 to 250 centistokes
PRESSURE DROP v’s FLOW
Recommended Filtration BS5540/4 18/13 (25 micron or better)
Viscosity = 32 cSt (150 SSU)
Fluid Compatible with most general
FLOW-US GPM
0 8 16 24 32 40
purpose hydraulic fluids
24 350
Seal Material Standard nitrile with PTFE back up rings
20 290 Seal Kit Number SK390 (Nitrile) SK390V (Viton)
PRESSURE-BAR
PRESSURE-PSI
12 175
Cartridge Weight 0.25 kg (0.55 lbs)
S607 & S608
Coil Weight 0.2 kg (0.4 lbs)
8 120
Cavity Number A881 (See Section 17)
4 60
S612 & S613 Torque into Cavity 60 Nm (44 lbs ft)
0 30 60 90 120 150
Electrical Data See coil data sheet
FLOW LITRES/MIN Line Body Material Aluminium Alloy (up to 210 bar*)
*For applications above 210 bar please consult our technical department or use the steel body option.
23.50 36.00
19.00 A/F
NORMALLY CLOSED
NORMALLY OPEN
53.90
51.40
38.50
32.00 A/F
7.40
1"-14-UNS-2A
56.70
ø19.00 1
2 HOLES ø8.7
THRO'
13.00
12.7
35.0
35.00
2
50.80
2 2
71.4
92.0
89.00
1 1 1 1
11
2 HOLES
ø9.0 THRO'
S6** N H 24 4W T
Body Type
Basic Code Omit = Standard
S607 = Poppet Type (normally open) T = Through ported
S608 = Poppet Type (normally closed) Port Sizes
S612 = Spool Type (normally open) 3W = 3/8” BSP 6T = 3/8” SAE
S613 = Spool Type (normally closed) 4W = 1/2” BSP 8T = 1/2” SAE
6W = 3/4” BSP 12T = 3/4” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for Coil Termination
availability) H = DIN43650
3 = Push (S607 & 612) F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
11-1812.B
S210 / S211 Directional Control Valve - 2-Way, 2-Position Spool
11 15
12
210
175
Internal Leakage Less than 60 ml/min
210 bar differential at 32 centistokes
PRESSURE (BAR)
PRESSURE (PSI)
PRESSURE (PSI)
0 0
0 4 8 12 16 20 24
FLOW (LITRES/MIN)
2-1
100 1450 100 1450
1-2
50 725 725
50
0 0 0 0
0 5 10 15 20 25 0 5 10 15 20 25 30 35
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
48.00
23.50 36.00
38.50
55.50
2 HOLES
24.00 A/F
2
ø6.8 THRO'
11
12.80
50.80
9.55
25.15
3/4"-16-UNF-2A
2 1
22.00
1
ø15.80
6.00
15.90
16.00
6.00 31.80
19.00
S21* N H 24 3W
Basic Code Port Sizes
S210 = (normally open) 2W = 1/4” BSP
S211 = (normally closed) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability) Coil Termination
1 = Push and twist (S210 & S211) H = DIN43650
2 = Screw (S210 & S211) F = Flying Leads
DM = Deutsch Moulded
We reserve the right to change specifications without notice Other terminations available on request
11-1912.B
S510(H) / S511(H) Directional Control Valve
2-Way, 2-Position Spool
Up to 25 litres/min (6.5 US GPM) Up to 210 bar (3000 PSI)
11 Internal Leakage
Less than 120 ml/min
210 bar differential at 32 centistokes
PRESSURE (PSI)
45
Cavity Number A12370 (See Section 17)
3
Torque into Cavity 30 Nm (22 lbs ft)
0 0
0 10 15 20 25 30 35 40
Electrical Data See coil data sheet
5
FLOW (LITRES/MIN) Line Body Material Aluminium Alloy
S510
100 1450 100 1450
S511
50 725 50 725
0 0 0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
49.00 50.80
35.50
21.00
50.00
66.00
11
18.50
38.10
25.40 A/F 2
8.30
50.80
32.40
7/8"-14-UNF-2A 1
2
7.10
1 19.10 16.00
ø15.80
3.15 41.30 31.80
S51** N H 24 3W
Basic Code Port Sizes
S510 = (normally open - standard valve) 3W = 3/8” BSP
S510H = (normally open - heavy duty valve) 4W = 1/2” BSP 8T = 1/2” SAE
S511 = (normally closed - standard valve)
S511H = (normally closed - heavy duty valve) Voltage
12 = 12 VDC 110 = 110 VAC
Seals 24 = 24 VDC 220 = 220 VAC
N = Nitrile
V = Viton Coil Termination
H = DIN43650
Manual Override (consult factory for availability) F = Flying Leads
2 = Screw (S510(H) & S511(H)) DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2012.B
S215 Directional Control Valve
2-Way, 2-Position Bi-Directional Poppet
Up to 1 litre/min (0.26 US GPM) Up to 210 bar (3000 PSI)
S215 FEATURES
NORMALLY CLOSED Very low leakage poppet design.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
2
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
1
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
SPECIFICATIONS
COIL INFORMATION
(See Page 11-1021)
Basic Model Code S215
Part Number: C13-*-*/14 2
Symbol
Voltage available: 12, 24 VDC 1
110, 220 VAC*
Max. Working Pressure 210 bar (3000 psi)
* AC coils must be used with a rectifying connector. Flow Rating See performance graphs
Nominal flow
1 litres/min (0.26 US GPM)
(at Delta P = 5 bar (70 psi))
11 Internal Leakage
Less than 0.3 ml/min (5 dpm)
210 bar differential at 32 centistokes
FLOW US (GPM)
Seal Material Standard nitrile with PTFE back up rings
0 0.1 0.25 0.4 0.55 Seal Kit Number SK1043 (Nitrile) SK1043V (Viton)
25 Mounting Position Unrestricted
20 300 Cartridge Weight 0.15 kg (0.3 lbs)
PRESSURE-BAR
PRESSURE-PSI
150
2000
100
1000
50
0 0
0 0.25 0.5 0.75 1.0 1.25
FLOW (LITRES/MIN)
50.00
48.00
23.50 36.00
55.50
38.50
2 HOLES
ø6.8 THRO'
2
11
12.80
50.80
24.00 A/F
9.55
1
27.30
3/4"-16-UNF-2A
22.00
1
6.00
ø12.60 15.90
16.00
6.00 31.80
19.00
S215 N H 24 3W
Basic Code Port Sizes
S215 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
1 = Push and Twist Coil Termination
2 = Screw H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2052.B
S217(H) Directional Control Valve
2-Way, 2-Position Bi-Directional Poppet
Up to 20 litres/min (5 US GPM) Up to 210 bar (3000 PSI)
S217(H) FEATURES
NORMALLY CLOSED Very low leakage poppet design.
Standard valve bodies and common cavities.
SPECIFICATIONS
COIL INFORMATION
(See Page 11-1021)
Basic Model Code S217(H)
Part Number: C16-*-*/19 (S217) 2
C16-*-*/29 (S217H) Symbol
1
Voltage available: 12, 24 VDC
110, 220 VAC* Max. Working Pressure 210 bar (3000 psi)
Flow Rating See performance graphs
* AC coils must be used with a rectifying connector.
Nominal flow
20 litres/min (5 US GPM)
(at Delta P = 5 bar (70 psi))
11 Internal Leakage
Less than 0.6 ml/min (10 dpm)
210 bar differential at 32 centistokes
PRESSURE (PSI)
30 435
Mounting Position Unrestricted
20 290 Cartridge Weight 0.17 kg (0.37 lbs)
2-1 1-2 Coil Weight 0.3 kg (0.6 lbs)
10 145
Cavity Number A879 (See Section 17)
0 0 Torque into Cavity 20 Nm (15 lbs ft)
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) Electrical Data See coil data sheet
Line Body Material Aluminium Alloy
50 725 50 725
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
49.00
35.50
21.00
50.00
72.00
2 HOLES
ø6.8 THRO'
11
12.80
2
50.80
24.00 A/F 1
22.00
9.25
27.40
3/4"-16-UNF-2A
2
6.00
15.90
16.00
ø12.60 1
6.00 31.80
19.00
S217* N H 24 3W
Basic Code Port Sizes
S217 = (standard valve) 2W = 1/4” BSP
S217H = (heavy duty valve) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2072.B
S217A Directional Control Valve
2-Way, 2-Position Bi-Directional Poppet
Up to 10 litres/min (2.6 US GPM) Up to 210 bar (3000 PSI)
S217A FEATURES
NORMALLY CLOSED Very low leakage poppet design.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
2
Various coil terminals and voltages.
1 Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
SPECIFICATIONS
COIL INFORMATION
(See Page 11-1021)
Basic Model Code S217A
Part Number: C13-*-*/27 2
Symbol
Voltage available: 12, 24 VDC 1
110, 220 VAC*
Max. Working Pressure 210 bar (3000 psi)
* AC coils must be used with a rectifying connector. Flow Rating See performance graphs
Nominal flow
10 litres/min (2.6 US GPM)
(at Delta P = 5 bar (70 psi))
11 Internal Leakage
Less than 0.6 ml/min (10 dpm)
210 bar differential at 32 centistokes
PRESSURE (PSI)
30
Cartridge Weight 0.2 kg (0.4 lbs)
2-1
20 290 Coil Weight 0.2 kg (0.4 lbs)
1-2 Cavity Number A879 (See Section 17)
10 145
Torque into Cavity 20 Nm (15 lbs ft)
0 0
0 5 10 15 20 25 30
Electrical Data See coil data sheet
FLOW (LITRES/MIN) Line Body Material Aluminium Alloy
100
1000
50
0 0
0 5 10 15 20
FLOW (LITRES/MIN)
50.00
48.00
23.50 36.00
59.00
38.50
2 HOLES
ø6.8 THRO'
24.00 A/F
11
12.80
2
50.80
8.25
27.30
3/4"-16-UNF-2A 1
22.00
ø12.60 1
6.00
15.90
16.00
6.00 31.80
19.00
S217A N H 24 3W
Basic Code Port Sizes
S217A 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
2 = Screw Coil Termination
3 = Push H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2074.B
S716 / S717 Directional Control Valve
2-Way, 2-Position Bi-Directional Poppet
Up to 90 litres/min (24 US GPM) Up to 350 bar (5000 PSI)
* AC coils must be used with a rectifying connector. S716: 280 bar (4060 psi)
Max. Working Pressure
S717: 350 bar (5000 psi)
11
25
350
Compatible with most general
20 300 Fluid
PRESSURE-BAR
250
15
2-1 200 Seal Material Standard nitrile with PTFE back up rings
10 150
1-2 Seal Kit Number SK1225 (Nitrile) SK1225V (Viton)
100
5
50 Mounting Position Unrestricted
PRESSURE-PSI
250
15
1-2 200
10 150 *For applications above 210 bar please consult our
2-1
100
technical department or use the steel body option.
5
50
0 20 40 60 80 100
FLOW LITRES/MIN
28.50
21.00
88.90
76.20
63.50
2
51.00
1-1/16"-12-UN-2A
2
1
44.45 2 HOLES
Ø10.5 THRO 25.40
Ø 23.75 1 63.50 12.70 50.80
36.00 88.90
38.50
67.00
31.75 A/F
11
21.00
CT1
28.50
76.20
63.50
88.90
2
1-1/16"-12-UN-2A
51.00
2
1
2 HOLES
Ø10.50 THRO'
1 44.50 25.40
Ø 23.75
63.50 12.70 50.80
11.2092.B
S220(H) Directional Control Valve - 3-Way, 2-Position Spool
S220(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
1
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
2 3
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
NORMALLY NORMALLY
CLOSED OPEN SELECTOR
(Pressure at Port 3) (Pressure at Port 2) (Pressure at Port 1) SPECIFICATIONS
ACTUATOR ACTUATOR
(1) (1) P (1)
Basic Model Code S220 (std) / S220H (heavy duty)
1
Symbol
T P P T ACT.1 ACT.2
(2) (3) (2) (3) (2) (3) 2 3
Part Number: C13-*-*/14 (S220) Less than 60 ml/min past each land
C13-*-*/27 (S220H) Internal Leakage
210 bar differential at 32 centistokes
11 Voltage available: 12, 24 VDC Temperature Range -20 to +120°C (-4 to +248°F)
110, 220 VAC* Nominal Viscosity Range 15 to 250 centistokes
Recommended Filtration BS5540/4 18/13 (25 micron or better)
* AC coils must be used with a rectifying connector.
Compatible with most general
Fluid
purpose hydraulic fluids
PRESSURE DROP v’s FLOW Seal Material Standard nitrile with PTFE back up rings
Viscosity = 32 cSt (150 SSU) Seal Kit Number SK973 (Nitrile) SK973V (Viton)
FLOW (US GPM) Mounting Position Unrestricted
0.5 1 1.5 2 2.5 3 3.5 Cartridge Weight 0.13 kg (0.3 lbs)
12.5 181
Coil Weight 0.2 kg (0.4 lbs)
10.0 145
Cavity Number A3531 (See Section 17)
PRESSURE (BAR)
PRESSURE (PSI)
0 0
0 2 4 6 8 10 12 14
FLOW (LITRES/MIN)
NORMALLY
150 2250 150 2250
CLOSED
NORMALLY SELECTOR
OPEN NORMALLY OPEN
100 1500 100 1500
50 750 50 750
0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
11.10
14.70
24.00 A/F
28.30
9.55
3/4"-16-UNF-2A
11
3
3 2
44.00
38.10
63.50
2
1
2 HOLES
1 ø7.1 THRO'
ø14.20
28.60 12.70
ø15.80
4.80 47.60 25.40
S220* N H 24 3W
Basic Code Port Sizes
S220 = (standard valve) 2W = 1/4” BSP
S220H = (heavy duty valve) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2112.B
S520(H) Directional Control Valve - 3-Way, 2-Position Spool
S520(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
APPLICATION Sealed coil arrangement to protect stem from corrosion.
NORMALLY NORMALLY
CLOSED OPEN SELECTOR
(Pressure at Port 3) (Pressure at Port 2) (Pressure at Port 1) SPECIFICATIONS
ACTUATOR ACTUATOR
(1) (1) P (1)
Basic Model Code S520 (std) / S520H (heavy duty)
1
T P P T ACT.1 ACT.2
(2) (3) (2) (3) (2) (3) Symbol
2 3
16 240
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
S520(H)
S520H
Normally open
150 2175 150 2175
S520
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
25.40 A/F
18.50
8.30
11
34.50
3
46.70
7/8"-14-UNF-2A 3
54.00
66.80
2
2
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
6.35 50.80 31.80
S520* N H 24 3W
Basic Code Port Sizes
S520 = (standard valve) 3W = 3/8” BSP
S520H = (heavy duty valve) 4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2212.B
S221(H) Directional Control Valve - 3-Way, 2-Position Spool
S221(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
APPLICATION
NORMALLY NORMALLY
CLOSED OPEN SELECTOR
(Pressure at Port 3) (Pressure at Port 1) (Pressure at Port 2) SPECIFICATIONS
ACTUATOR ACTUATOR
(2) (2) P (2)
Basic Model Code S221(std) / S221H (heavy duty)
2
T P P T ACT.1 ACT.2
(1) (3) (1) (3)
Symbol
(1) (3)
1 3
* AC coils must be used with a rectifying connector. Nominal Viscosity Range 15 to 250 centistokes
Recommended Filtration BS5540/4 18/13 (25 micron or better)
PRESSURE (PSI)
1-2
130
Coil Weight 0.2 kg (0.4 lbs)
9
Cavity Number A3531 (See section 17)
6 90
3-2 Torque into Cavity 20 Nm (15 lbs ft)
3 45 Electrical Data See coil data sheet
0 0 Line Body Material Aluminium Alloy
0 2 4 6 8 10 12 14 16 18 20
FLOW (LITRES/MIN)
SELECTOR
150 2175 150 2175
SELECTOR
100 1450 100 1450
50 725 50 725
0 0 0 0
0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14 16 18 20
FLOW (LITRES/MIN)
FLOW (LITRES/MIN)
11.10
14.70
24.00 A/F
28.30
9.55
3/4"-16-UNF-2A
3 2
3
11
38.10
44.00
63.50
2
1
2 HOLES
ø7.1 THRO'
ø14.20 1
28.60 12.70
ø15.80
4.80 47.60 25.40
S221* N H 24 3W
Basic Code Port Sizes
S221 = (standard valve) 2W = 1/4” BSP
S221H = (heavy duty valve) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2312.B
S521(H) Directional Control Valve - 3-Way, 2-Position Spool
S521(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
1
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
2 3
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options
APPLICATION available.
Sealed coil arrangement to protect stem from corrosion.
NORMALLY NORMALLY
CLOSED OPEN SELECTOR
(Pressure at Port 3) (Pressure at Port 1) (Pressure at Port 2) SPECIFICATIONS
ACTUATOR ACTUATOR
(2) (2) P (2)
Basic Model Code S521 / S521H
2
T P P T ACT.1 ACT.2
(1) (3) (1) (3) (1) (3)
Symbol
1 3
PRESSURE (PSI)
12 175
Cartridge Weight 0.2 kg (0.4 lbs)
9 130
1-2 & 2-1 Coil Weight 0.3 kg (0.6 lbs)
6 90 Cavity Number A12743 (See section17)
45
Torque into Cavity 30 Nm (22 lbs ft)
3
Electrical Data See coil data sheet
0 0
0 5 10 15 20 25 30 35 40 Line Body Material Aluminium Alloy
FLOW (LITRES/MIN)
0 0
0 0
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
FLOW (LITRES/MIN)
50.00
25.40 A/F
18.50
8.30
11
34.50
3
47.10
7/8"-14-UNF-2A 3
54.00
66.80
2
2
1
1
ø15.80
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
6.35 50.80 31.80
S521* N H 24 3W
Basic Code Port Sizes
S521 = (standard valve) 3W = 3/8” BSP
S521H = (heavy duty valve) 4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability) Coil Termination
2 = Screw H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on
request
We reserve the right to change specifications without notice
11-2412.B
S222 Directional Control Valve - 3-Way, 2-Position Spool
S222 FEATURES
Increased flow capacity with low pressure drop.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
NORMALLY
CLOSED
(Pressure at Port 3) SPECIFICATIONS
ACTUATOR
(2) Basic Model Code S222
2
1 3
(T) (P) Symbol
1 3
PRESSURE (PSI)
75 1090
50 725
25 360
0 0
0 2 4 6 8 10 12 14 16 18 20
FLOW (LITRES/MIN)
11.10
14.70
24.00 A/F
28.30
9.55
3/4"-16-UNF-2A 3
3 2
11
44.35
38.10
63.50
2
1
2 HOLES
ø7.1 THRO'
ø14.20 1
28.60 12.70
ø15.80
4.80 47.60 25.40
S222 N H 24 3W
Basic Code Port Sizes
S222 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
1 = Push and twist Coil Termination
2 = Screw H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2512.B
S525(H) Directional Control Valve - 3-Way, 2-Position Spool
S525(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
11 C16-*-*/29 (S525H)
Temperature Range
210 bar differential at 32 centistokes
50
1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 Cartridge Weight 0.2 kg (0.4 lbs)
Coil Weight 0.3 kg (0.6 lbs)
600
40
Cavity Number A12743 (See Section 17)
PRESSURE (BAR)
PRESSURE (PSI)
30
400
Torque into Cavity 30 Nm (22 lbs ft)
20
Electrical Data See coil data sheet
200 Line Body Material Aluminium Alloy
10
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
50 725 50 725
NORMALLY CLOSED
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
25.40 A/F
18.50
8.30
34.50
3
46.70
11
7/8"-14-UNF-2A 3
54.00
66.80
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
6.35 50.80 31.80
S525* N H 24 3W
Basic Code Port Sizes
S525 = (standard valve) 3W = 3/8” BSP
S525H = (heavy duty valve) 4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2612.B
S526 Directional Control Valve - 3-Way, 2-Position Spool
S526 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
SPECIFICATIONS
Symbol
COIL INFORMATION
2 3
(See Page 11-1021) Max. Working Pressure 210 bar (3000 psi)
Flow Rating See performance graphs
Part Number: C16-*-*/19
Nominal Flow
11 litres/min (3 US GPM)
Voltage available: 12, 24 VDC (at Delta P = 5 bar (70 psi))
110, 220 VAC*
Internal Leakage Less than 120 ml/min past each land
* AC coils must be used with a rectifying connector. 210 bar differential at 32 centistokes
PRESSURE (PSI)
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
2-3
100 1450
50 725
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
50.00
25.40 A/F
18.50
8.30
34.50
3
46.70
7/8"-14-UNF-2A 3
54.00
11
66.80
2
2
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
6.35 50.80 31.80
S526 N H 24 3W
Basic Code Port Sizes
S526 3W = 3/8” BSP
4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
2 = Screw
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2712.B
S228 Directional Control Valve - 3-Way, 2-Position Spool
S228 FEATURES
Increased flow capacity with low pressure drop.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1 Oil immersed armature solenoid.
Various coil terminals and voltages.
2 3 Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
APPLICATION
NORMALLY
CLOSED
(Pressure at Port 2) SPECIFICATIONS
ACTUATOR
1
Basic Model Code S228
1
3 2
(T) (P)
Symbol
3 2
9 130
Coil Weight 0.2 kg (0.4 lbs)
6 90 Cavity Number A18333 (See Section 17)
3 45
Torque into Cavity 20 Nm (15 lbs ft)
1-3 2-1
Electrical Data See coil data sheet
0 0
0 4 8 12 16 Line Body Material Aluminium Alloy
FLOW (LITRES/MIN)
75 1090
50 725
25 360
0 0 0
0 2 4 6 8 10 12 14 16 18
FLOW (LITRES/MIN)
23.50 36.00
57.20
38.50
55.50
11.10
14.70
24.00 A/F
28.30
9.55
3
3/4"-16-UNF-2A
2
11
38.10
3
63.50
44.35
2
1
2 HOLES
ø7.1 THRO'
ø14.20 1
28.60 12.70
ø15.80 4.80 47.60 25.40
S228 N H 24 3W
Basic Code Port Sizes
S228 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2722.B
S229 Directional Control Valve - 3-Way, 2-Position Poppet
S229 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
PRESSURE (PSI)
3-2
WORKING PRESSURE (BAR)
3000
150
2000
100
1000
2-1
50
0 0
0 5 10 15 20 25
FLOW (LITRES/MIN)
50.00
11.10
14.70
24.00 A/F
11
28.30
9.55
3/4"-16-UNF-2A
3
2
38.10
3
63.50
44.00
2
1
2 HOLES
ø7.1 THRO'
ø14.20 1
28.60 12.70
ø15.80 4.80 47.60 25.40
S229 N H 24 3W
Basic Code Port Sizes
S229 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2732.B
S240 Directional Control Valve - 4-Way, 2-Position Spool
S240 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
Symbol
P (3) T (1)
PRESSURE (PSI)
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16 18 20
FLOW (LITRES/MIN)
38.50
14.10
11.00
24.00 A/F
9.55
28.50
3/4"-16-UNF-2A
4
42.70
4
54.00
3
3
50.80
76.20
2
2
11
1 2 HOLES 1
ø12.60
ø7.1 THRO'
ø14.20
S240 N H 24 3W
Basic Code Port Sizes
S240 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-2812.B
S241 Directional Control Valve - 4-Way, 2-Position Spool
S241 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Reversible coil without affecting performance.
COIL INFORMATION
(See Page 11-1021)
PRESSURE (PSI)
10.0 145
50 725
0 0
0 2 4 6 8 10 12 14 16 18 20
FLOW (LITRES/MIN)
38.50
14.10
11.00
24.00 A/F
9.55
28.50
3/4"-16-UNF-2A
4
42.70
4
54.00
3
3
11
50.80
76.20
2
2
1 2 HOLES 1
ø12.60
ø7.1 THRO'
ø14.20
S241 N H 24 3W
Basic Code Port Sizes
S241 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
1 = Push and twist Coil Termination
2 = Screw H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-2912.B
S541 Directional Control Valve - 4-Way, 2-Position Spool
S541 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4 Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Reversible coil without affecting performance.
COIL INFORMATION
(See Page 11-1021)
10.0 145
Fluid
purpose hydraulic fluids
7.5 109
Seal Material Viton with PTFE back up rings
5.0 72 Seal Kit Number SK1031 (Nitrile) SK1031V (Viton)
2-1
36
Mounting Position Unrestricted
2.5
Cartridge Weight 0.13 kg (0.3 lbs)
0 0
0 4 8 1216 20 24 28 32 Coil Weight 0.3 kg (0.6 lbs)
FLOW (LITRES/MIN)
Cavity Number A12744 (See page 11-441)
Torque into Cavity 30 Nm (22 lbs ft)
Electrical Data See coil data sheet
Line Body Material Aluminium Alloy
150 2175
100 1450
3-4
50 725
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
50.00
25.40 A/F
18.50
8.30
34.50
4
50.50
7/8"-14-UNF-2A 4
62.50
11
3
73.20
82.60
2
2
1
1
ø15.80
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
S541 N H 24 3W
Basic Code Port Sizes
S541 3W = 3/8” BSP
4W = 1/2” BSP 8T = 1/2” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
1 = Push and twist Coil Termination
2 = Screw H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-3012.B
S242(H) Directional Control Valve - 4-Way, 2-Position Spool
S242(H) FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1 Oil immersed armature solenoid.
Various coil terminals and voltages.
2 3 4
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Reversible coil without affecting performance.
COIL INFORMATION
SPECIFICATIONS
(See Page 11-1021)
Part Number: C13-*-*/14 (S242) Basic Model Code S242 (std) / S242H (heavy duty)
C13-*-*/27 (S242H) A (2) B (4)
Nominal Flow
(at Delta P = 5 bar (70 psi)) 11 litres/min (3 US GPM)
11 PRESSURE DROP v’s FLOW Internal Leakage Less than 60 ml/min past each land
210 bar differential at 32 centistokes
Viscosity = 32 cSt (150 SSU)
Temperature Range -20 to +120°C (-4 to +248°F)
Nominal Viscosity Range 15 to 250 centistokes
Recommended Filtration BS5540/4 18/13 (25 micron or better)
7.5 109
Cartridge Weight 0.13 kg (0.3 lbs)
0 0
Electrical Data See coil data sheet
0 2 4 6 8 10 12 14 16 Line Body Material Aluminium Alloy
FLOW (LITRES/MIN)
50 725 50 725
0 0 0 0
0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN) ALL FLOW PATHS FLOW (LITRES/MIN)
38.50
14.10
11.00
24.00 A/F
9.55
28.50
3/4"-16-UNF-2A
4
42.70
4
54.00
3
3
11
50.80
76.20
2
2
1 2 HOLES 1
ø12.60
ø7.1 THRO'
ø14.20
S242* N H 24 3W
Basic Code Port Sizes
S242 = (standard valve) 2W = 1/4” BSP
S242H = (heavy duty valve) 3W = 3/8” BSP 6T = 3/8” SAE
Seals Voltage
N = Nitrile 12 = 12 VDC 110 = 110 VAC
V = Viton 24 = 24 VDC 220 = 220 VAC
11-3112.B
S542 Directional Control Valve - 4-Way, 2-Position Spool
S542 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
1
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Symbol
P (3) T (1)
1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 Temperature Range -20 to +120°C (-4 to +248°F)
25 365
Nominal Viscosity Range 15 to 250 centistokes
PRESSURE (PSI)
100 1450
50 725
0 0
0 5 10 15 20 25 30 35
FLOW (LITRES/MIN)
NOTE:
For applications were unbalanced pressure and return flows are encountered the flow rate of this valve should be reduced, please
contact our sales office for details.
50.00
25.40 A/F
8.30
18.50
34.50
7/8"-14-UNF-2A 4
4
50.50
62.50
11
3
73.20
3
82.60
2
2
1
1
ø15.80
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00
6.35 50.80 31.80
S542 N H 24 3W
Basic Code Port Sizes
S542 3W = 3/8” BSP
4W = 1/2” BSP 8T = 1/2” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
2 = Screw Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on
We reserve the right to change specifications without notice request
11-3212.B
S270 Directional Control Valve - 4-Way, 3-Position Spool
S270 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1 Oil immersed armature solenoid.
COIL INFORMATION
(See Page 11-1021)
PRESSURE (PSI)
12 145
3-4 & 3-2 Seal Material Standard nitrile with PTFE back up rings
9 130
Seal Kit Number SK974 (Nitrile) SK974V (Viton)
Mounting Position Unrestricted
6 90
Cartridge Weight 0.16 kg (0.35 lbs)
2-1 & 4-1
3 45
Coil Weight 0.2 kg (0.4 lbs) - two per valve
0 0
Cavity Number A6951 (See Section 17)
0 2 4 6 8 10 12 14 16
Torque into Cavity 20 Nm (15 lbs ft)
FLOW (LITRES/MIN)
Electrical Data See coil data sheet
Line Body Material Aluminium Alloy
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN)
38.50
11.00
14.10
24.00 A/F
11.50
28.50
42.70
11
3/4"-16-UNF-2A 4
54.00
4
50.80
3
76.20
3
2
2
1
1 2 HOLES
ø12.60
ø7.1 THRO'
ø14.20
ø15.80 28.60 12.70
4.80 47.60 25.40
S270 N H 24 3W
Basic Code Port Sizes
S270 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-3312.B
S570 Directional Control Valve - 4-Way, 3-Position Spool
S570 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
Nominal flow
PRESSURE DROP v’s FLOW (at Delta P = 5 bar (70 psi))
22 litres/min (5.8 US GPM)
PRESSURE (PSI)
5 70
Cartridge Weight 0.25 kg (0.55 lbs)
2-1 & 4-1
Coil Weight 0.3 kg (0.6 lbs) - two per valve
0 0 Cavity Number A12744 (See Section 17)
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) Torque into Cavity 30 Nm (22 lbs ft)
Electrical Data See coil data sheet
Line Body Material Aluminium Alloy
50 725 50 725
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
11
18.50
12.00
27.00 A/F
34.50
4
50.50
7/8"-14-UNF-2A 4
62.50
3
73.20
3
82.60
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
S570 N H 24 3W
Basic Code Port Sizes
S570 3W = 3/8” BSP
4W = 1/2” BSP 8T = 1/2” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-3412.B
S271 Directional Control Valve - 4-Way, 3-Position Spool
S271 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
Nominal Flow
PRESSURE DROP v’s FLOW (at Delta P = 5 bar (70 psi))
8 litres/min (2 US GPM)
3-4 & 3-2 Seal Kit Number SK974 (Nitrile) SK974V (Viton)
9 130
Mounting Position Unrestricted
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN)
38.50
11.00
14.10
24.00 A/F
28.50
11.50
42.70
3/4"-16-UNF-2A 4
4
11
54.00
50.80
76.20
3
3
2
2
1
2 HOLES
1 ø7.1 THRO'
ø12.60
ø14.20 28.60 12.70
ø15.80 4.80 47.60 25.40
S271 N H 24 3W
Basic Code Port Sizes
S271 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-3512.B
S571 Directional Control Valve - 4-Way, 3-Position Spool
S571 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
Nominal Flow
PRESSURE DROP v’s FLOW (at Delta P = 5 bar (70 psi))
18 litres/min (4.7 US GPM)
PRESSURE (PSI)
50 725 50 725
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
11
18.50
12.00
27.00 A/F
34.50
4
50.50
7/8"-14-UNF-2A 4
62.50
3
73.20
3
82.60
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
11-3612.B
S272 Directional Control Valve - 4-Way, 3-Position Spool
S272 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1 Oil immersed armature solenoid.
2 3 4 Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
SPECIFICATIONS
Part Number: C13-*-*/22 (two per valve)
Basic Model Code S272
Voltage available: 12, 24 VDC
110, 220 VAC* A (2) B (4)
Symbol
* AC coils must be used with a rectifying connector. B A
P (3) T (1)
PRESSURE (PSI)
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN)
38.50
11.00
14.10
24.00 A/F
11.50
28.50
11
42.70
3/4"-16-UNF-2A 4
54.00
4
50.80
3
76.20
3
2
2
1
1 2 HOLES
ø12.60
ø7.1 THRO'
ø14.20
ø15.80 28.60 12.70
4.80 47.60 25.40
S272 N H 24 3W
Basic Code Port Sizes
S272 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
We reserve the right to change specifications without notice Other terminations available on request
11-3712.B
S572 Directional Control Valve - 4-Way, 3-Position Spool
S572 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
2 3 4
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
SPECIFICATIONS
Part Number: C16-*-*/19 (two per valve)
Basic Model Code S572
Voltage available: 12, 24 VDC
110, 220 VAC* A (2) B (4)
Symbol
* AC coils must be used with a rectifying connector. B A
P (3) T (1)
50 725 50 725
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN) FLOW (LITRES/MIN)
50.00
11
18.50
12.00
27.00 A/F
34.50
4
50.50
7/8"-14-UNF-2A 4
62.50
3
73.20
3
82.60
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
11-3812.B
S274 Directional Control Valve - 4-Way, 3-Position Spool
S274 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
COIL A COIL B
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1 Oil immersed armature solenoid.
Symbol
B A
PRESSURE DROP v’s FLOW P (3) T (1)
Viscosity = 32 cSt (150 SSU) Max. Working Pressure 210 bar (3000 psi)
Flow Rating 14 litres/min (3.7 US GPM)
SPOOL SHIFTED
FLOW (US GPM) Nominal flow
12 litres/min (3.2 US GPM)
10
0.5 1 1.5 2 2.5 3
150
(at Delta P = 5 bar (70 psi))
PRESSURE (PSI)
3-2 or 3-4
6 90
2-1 Temperature Range -20 to +120°C (-4 to +248°F)
4 60 Nominal Viscosity Range 15 to 250 centistokes
4-1 Recommended Filtration BS5540/4 18/13 (25 micron or better)
2 30
10
0.5 1 1.5 2 2.5 3
150
Mounting Position Unrestricted
Cartridge Weight 0.16 kg (0.35 lbs)
8 120
Coil Weight 0.2 kg (0.4 lbs) - two per valve
PRESSURE (BAR)
PRESSURE (PSI)
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN)
38.50
11.00
14.10
24.00 A/F
11.50
28.50
42.70
3/4"-16-UNF-2A 4
11
54.00
4
50.80
3
76.20
3
2
2
1
ø12.60 1 2 HOLES
ø7.1 THRO'
ø14.20
ø15.80 28.60 12.70
4.80 47.60 25.40
S274 N H 24 3W
Basic Code Port Sizes
S274 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-3912.B
S574 Directional Control Valve - 4-Way, 3-Position Spool
S574 FEATURES
High flow capacity with reduced space requirements.
COIL A COIL B No dynamic seals.
Standard valve bodies and common cavities.
2 3
Oil immersed armature solenoid.
4
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
Symbol
B A
PRESSURE DROP v’s FLOW P (3) T (1)
Viscosity = 32 cSt (150 SSU) Max. Working Pressure 210 bar (3000 psi)
Flow Rating 34 litres/min (8.7 US GPM)
SPOOL SHIFTED
FLOW (US GPM) Nominal flow
20 litres/min (5 US GPM)
15
1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 (at Delta P = 5 bar (70 psi))
210
11 12 175
Internal Leakage Less than 120 ml/min past each land
PRESSURE (BAR)
PRESSURE (PSI)
PRESSURE (PSI)
150 2175
100 1450
50 725
0 0
0 5 10 15 20 25 30 35 40
FLOW (LITRES/MIN)
50.00
18.50
12.00
27.00 A/F
34.50
4
11
50.50
7/8"-14-UNF-2A 4
62.50
3
73.20
3
82.60
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
S574 N H 24 3W
Basic Code Port Sizes
S574 3W = 3/8” BSP
4W = 1/2” BSP 8T = 1/2” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-4012.B
S277 Directional Control Valve - 4-Way, 3-Position Spool
S277 FEATURES
High flow capacity with reduced space requirements.
COIL A COIL B No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
Nominal flow
8 litres/min (2 US GPM)
PRESSURE DROP v’s FLOW (at Delta P = 5 bar (70 psi))
Viscosity = 32 cSt (150 SSU) Less than 100 ml/min past each land
11 Internal Leakage
210 bar differential at 32 centistokes
PRESSURE (PSI)
150 2175
100 1450
50 725
0 0
0 2 4 6 8 10 12 14 16
FLOW (LITRES/MIN)
38.50
11.00
14.10
24.00 A/F
11.50
28.50
11
42.70
3/4"-16-UNF-2A 4
54.00
4
50.80
3
76.20
3
2
2
1
1 2 HOLES
ø12.60
ø7.1 THRO'
ø14.20
ø15.80 28.60 12.70
4.80 47.60 25.40
S277 N H 24 3W
Basic Code Port Sizes
S277 2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Seals
N = Nitrile Voltage
V = Viton 12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Manual Override (consult factory for availability)
4 = Push/Pull Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
We reserve the right to change specifications without notice
11-4112.B
S577R Directional Control Valve - 4-Way, 3-Position Spool
S577R FEATURES
High flow capacity with reduced space requirements.
COIL A COIL B No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
1
Oil immersed armature solenoid.
2 3 4
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
COIL INFORMATION
(See Page 11-1021)
180
PRESSURE (PSI)
PRESSURE (PSI)
12 180
Torque into Cavity 30 Nm (22 lbs ft)
8 120
Electrical Data See coil data sheet
4 60 Line Body Material Aluminium Alloy
3-1
0 0
0 5 10 15 20 25 30
FLOW (LITRES/MIN)
140 2000
70 1000
0 0
0 5 10 15 20 25 30
FLOW (LITRES/MIN)
50.00
18.50
12.00
11
27.00 A/F
34.50
4
50.50
7/8"-14-UNF-2A 4
62.50
3
73.20
3
82.60
2
2
1
ø15.80 1
2 HOLES
ø17.40 ø7.1 THRO'
31.80 16.00
ø19.00 6.35 50.80 31.80
11-4212.B
PDR2 Pressure Relief Valve
PDR2 FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
SPECIFICATIONS
Basic Model Code PDR2
1
Symbol
2
Max. Inlet Pressure 350 bar (5000 psi)
PRESSURE (PSI)
0 0
0 0.25 0.50 0.75 1.00 1.25 1.50 *For applications above 210 bar please consult our
FLOW LITRES/MIN technical department or use the steel body option.
PROPORTIONAL CONTROLS
350 5000 350 5000
5 - 120 bar
10 - 240 bar
300 300
4000 75% 4000
250 250
PRESSURE (BAR)
PRESSURE (PSI)
10 - 240 bar
PRESSURE (BAR)
PRESSURE (PSI)
200 3000 200 3000
50%
150 150
2000 75% 2000
100 100
50%
5 - 120 bar 1000 25% 1000
50 50
25%
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 0.25 0.50 0.75 1.00 1.25 1.50
% OF RATED CURRENT FLOW LITRES/MIN
49.00 35.50 BSP, aluminium SAE, aluminium BSP, steel SAE, steel
1/4” A1485 1/4” A14842 1/4” A14128
21.00 3/8” A1043 3/8” A15676 3/8” A14175 3/8” A14843
101.00
50.00
24.0 A/F
12.7
19.4
0
11
2
29.00
28.8
3/4"-16 UNF
T (2)
44.8
50.8
ø12.60 P (1)
1
16.0 15.9
31.0 31.8
44.0 2 HOLES
50.0 ø6.8 THRO'
11/2-152.A
PPD2 2A/H Pressure Reducing Valve
3-Way, 2-Position
20 litres/min (5.4 US GPM) 210 bar (3000 PSI)
PROPORTIONAL CONTROLS
PPD2 2A FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
SPECIFICATIONS
1 (Reg)
Symbol
3 (TANK)
3 (Tank) 2 (pres)
Viscosity = 32 cSt (150 SSU) Recommended Filtration BS5540/4 18/13 (25 micron or better)
PRESSURE (PSI)
PROPORTIONAL CONTROLS
400
25
PRESSURE (BAR)
PRESSURE (PSI)
20 300
PPD2 2AH
15
200
PPD2 2A
10
100
5
0 0
0 10 20 30 40 50 60 70 80 90 100
% OF RATED CURRENT
MAN OVERRIDE
10.00 A/F
MAN OVERRIDE
LOCKNUT
92.00
50.00
11.10
14.70
16.90
11
24.00 A/F
28.30
3/4"-16-UNF-2A
3 (Tank) 3
39.80
2
38.10
2 (Pressure)
1
1 (Regulated)
Ø14.20
2 HOLES
Ø15.80 Ø7.1 THRO'
28.60 12.70
PFR2 4A FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S5 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
SPECIFICATIONS
Basic Model Code PFR2 4A
2
Symbol
1
(OUT)
PRESSURE DROP v’s FLOW Recommended Filtration BS5540/4 16/13 (25 micron or better)
Compatible with most general
Viscosity = 32 cSt (150 SSU) Fluid purpose hydraulic fluids
PFR2 4A @ 100% Seal Material Standard nitrile with PTFE back up rings
Seal Kit Number SK1138 (Nitrile) SK1138V (Viton)
FLOW US (GPM)
2.5 5 7.5 10 Mounting Position Unrestricted
25
350 Cartridge Weight 0.2 kg (0.44 lbs)
300
20 Coil Weight 0.3 kg (0.6 lbs)
PRESSURE (BAR)
PRESSURE (PSI)
250
15 Cavity Number A6701 (See Section 17)
200
150
Torque into Cavity 30 Nm (22 lbs ft)
10
100 Electrical Data See coil data sheet
5
50 Line Body Material Aluminium Alloy
0
5 10 15 20 25 30 40
* Based on a saturated inlet with an increasing signal.
FLOW (LITRES/MIN)
PROPORTIONAL CONTROLS
PRESSURE (PSI)
0 500 1000 1500 2000 2500 3000
35 35
9 9
100% of rated amps
30 8 30 8
7 7
25 25
FLOW (LITRES/MIN)
FLOW (LITRES/MIN)
6
FLOW US (GPM)
6
FLOW US (GPM)
75% of rated amps
20 5 20 5
15 4 15 4
3 3
10 10
2 50% of rated amps 2
5 5
1 1
0 0
10 20 30 40 50 60 70 80 90 100 20 40 60 80 100 120 140 160 180 200 220
% Rated Amps PRESSURE DIFFERENTIAL BAR
21.00
10.00 A/F
92.00
50.00
11
16.90
2 HOLES
24.00 A/F Ø6.8 THRO'
2
12.80
50.80
3/4"-16-UNF-2A
27.8
2
22.00
1
1
Ø15.80
6.00
15.90
16.00
19.00 6.00 31.80