Академический Документы
Профессиональный Документы
Культура Документы
• Crochet (/en/blog/thread/5/croche
• CAL, KAL & Co. (/en/xal) Free Crochet Pattern. Dino (/en/blog/84
Materials:
5/free-crochet-pattern-dino)
• Bestseller (/en/bestsellers) - Yarn, (acrylic or cotton) of your choice. The yarn colour is at your discretion. Grey,
2 Comments last by monique-kuijpers (/en/blog/8
silver, or blue will do. Additional yarn of a contrasting colour.
• New patterns (/en/new) 45/free-crochet-pattern-dino#c_2098)
- A small amount of white colour yarn Sunday, June 7, 2020
• Featured (/en/featured) I used grey and blue colour acrylic yarn, 250 m/100 g. The size of my flying saucer is
10 cm in diameter, its height is 6 cm + 9 cm for the transparent part. The size is Dandelion. Little sunny. (/en/blog/153
• Discount (/en/sale)
1/dandelion-little-sunny)
suitable for a small alien such as this one, pattern at the
• Free patterns (/en/free) 5 Comments last by crochetfantasy (/en/blog/153
link https://www.crazypatterns.net/en/blog/1937/little-martian
1/dandelion-little-sunny#c_2075)
• Popular authors (/en/authors) (https://www.crazypatterns.net/en/blog/1937/little-martian) Saturday, May 30, 2020
› Sewing (/en/sewing)
Free crochet pattern "Easter basket"
- A crochet hook, I used 1,5 mm crochet hook
› Crafts / DIY (/en/crafts) (/en/blog/620/free-crochet-pattern-eas
- Hollow fibre for stuffing
ter-basket)
› Knooking (/en/knooking-patterns) - A piece of wire approx. 15cm long
11 Comments last by patricia-taplin (/en/blog/62
- Transparent glue
› Felting (/en/felting-patterns) 0/free-crochet-pattern-easter-basket#c_1901)
- A sewing needle, matching sewing threads Friday, March 6, 2020
› Embroidery (/en/stitch) - Black, red, yellow colour embroidery yarn/thread
Free Crochet Pattern Sneakers (/en/blo
› Plotting (/en/plotter) 4 buttons 1 cm in diam.
g/1641/free-crochet-pattern-sneaker)
A plastic bottle of the appropriate shape (I used 0.5ltrs volume bottle) or a plastic
1 Comment last by deborah-butler1 (/en/blog/164
Community & Help cup
1/free-crochet-pattern-sneaker#c_1900)
Popular patterns
14) 84 sc
Fanui (/en/items/57902/fanu
i)
Top patterns from MorbenDesign (/en/us
ers/MorbenDesign) from the Crochet cate
gory!
Deco-Hats / Pincushion -- Cr
ochet Pattern by Haekelkek
s® (/en/items/41646/deco-h
ats-pincushion-crochet-patt
ern-by-haekelkeks)
Top patterns from haekelkeks (/en/users/
haekelkeks) from the Crochet category!
Crochet pattern jacket "Swe
et Feelings" (/en/items/1765
3/crochet-pattern-jacket-sw
eet-feelings)
Top patterns from nicje (/en/users/nicje)
from the Crochet category!
Knitting Pattern –Baby Cap
“Little Star” & Triangular S
carf – No.192E (/en/items/36
874/knitting-pattern-baby-c
ap-little-star-triangular-scar
f-no-192e)
Top patterns from WoolAffair (/en/users/
WoolAffair) from the Knitting category!
Eierwärmer (/en/blog/tag/Eierwärmer)
acryl (/en/blog/tag/acryl)
winter romance (/en/blog/tag/winter-roman
ce)
ромашки (/en/blog/tag/ромашки)
Take a plastic bottle and cut out a rectangle to strengthen the cabin. The rectangle
Eumel (/en/blog/tag/Eumel)
should equal to the height of the cabin minus 0.5cm. The length of the rectangle
innensohle (/en/blog/tag/innensohle)
should equal to the circumference of the cabin plus 0.5cm.
wreath (/en/blog/tag/wreath)
Roll the part, fasten the edges with some self-adhesive fabric tape. Put it over the
traube (/en/blog/tag/traube)
cabin, see photos for guidance.
Häkelschriftzeichen (/en/blog/tag/Häkelschri
ftzeichen)
amigurumi free pattern (/en/blog/tag/amigur
umi-free-pattern)
Windmühlen basteln (/en/blog/tag/Windmühl
en-basteln)
Bastelidee (/en/blog/tag/Bastelidee)
Strickgarn (/en/blog/tag/Strickgarn)
Modeschmuck (/en/blog/tag/Modeschmuc
k)
Auftrag (/en/blog/tag/Auftrag)
инопланетянин (/en/blog/tag/инопланетя
нин)
Mützen (/en/blog/tag/Mützen)
gefilzt (/en/blog/tag/gefilzt)
DK (/en/blog/tag/DK)
schnell häkeln (/en/blog/tag/schnell-häkeln)
Fadengrafik (/en/blog/tag/Fadengrafik)
Krone (/en/blog/tag/Krone)
Häkelanleitung Igel (/en/blog/tag/Häkelanleit
ung-Igel)
ободок (/en/blog/tag/ободок)
Schritt-für-Schritt (/en/blog/tag/Schritt-für-S
chritt)
Mini Beutel (/en/blog/tag/Mini-Beutel)
Pillow Bear Pillow-bear Amigurumi crochet fr
ee pattern (/en/blog/tag/Pillow--Bear---Pillow-
bear--Amigurumi-crochet-free-pattern)
Marienkäfer Mathilda (/en/blog/tag/Marienk
äfer-Mathilda)
Gastgeschenk (/en/blog/tag/Gastgeschenk)
Schuh (/en/blog/tag/Schuh)
Outer part (top)
Attach the yarn to the Rnd 17 of the cabin. Crocheting direction is marked with an
arrow on the photo.
Prepare a bottle of a suitable size and shape. Cut off 9-10cm. Attach it to Rnd 7, both
parts should have an equal diameter. If the diameter of the bottle is slightly smaller
it’s not an issue, after you’ve finished a round you may tighten it with a thread. Do it
after you’ve stuffed it with some hollow fibre as shown on the photo.
8) (5 sc, inc)х 9 times (63)
9) 63 sc
10) (3 sc, inc, 3 sc)х 9 times (72)
11) 72 sc
12) (7 sc, inc)х 9 times (81)
13) (13 sc, inc, 13 sc)х 3 times (84)
Change to the contrasting colour yarn.
Dashboard
Work with white colour yarn.
Ch 12
1) starting from 2nd ch from hook: (inc, 4 sc)х 2 times, inc, ch, turn (14)
2) 14 sc, ch, turn (14)
3) (4 sc, inc)х 2 times, 4 sc, ch, turn (16)
4) 16 sc
Fasten off, cut off.
Embroider a few buttons on the dashboard with red, yellow and black yarns/treads.
Sew it on.
Control lever
Prepare a piece of wire, about 4 cm long. Bend the end with the help of pliers. Apply
some glue onto the wire and wrap black yarn around it. Leave to dry. Insert it in the
dashboard.
Transparent part of the cabin
I used a part of the plastic bottle (9cm long), I cut off the bottom and top parts from
it. I decorated the opening in the top part with a crocheted hatch. You may substitute
it for a plastic cup.
Hatch
Work with a contrasting colour yarn
1) 6 sc in a Magic Ring
2) 6 inc (12)
3) (inc, 1 sc)х 6 times (18)
4) (1 sc, inc, 1 sc)х 6 times (24)
5) (inc, 3 sc)х 6 times (30)
6) (2 sc, inc, 2 sc)х 6 times (36)
7) (inc, 5 sc)х 6 times (42)
8) 42 sc
Fasten off, cut off.
Decorate the hatch with a spring. Prepare a piece of wire, about 10 cm long. Apply
some glue onto the wire and wrap yarn around it. Leave to dry. Insert the spring into
the centre of the hatch, fasten it on the inside.
Attach and sew the buttons to the bottom part in line with the button holes and
fasten them.
The flying saucer is complete! Place your little Martian inside the space ship.
Everything is ready for a space flight!
Author of this article and many other community members look forward
for your feedback.