Академический Документы
Профессиональный Документы
Культура Документы
View C
View B
View A
*You need to print the printer test square before you print any of the pattern pieces. This is because you need
to make sure your printer is printing correctly. The printer test square is for you to measure, to make sure that
your printer is correctly callibrated and does not skew the page scale. Always make sure your printer is set to
print to “Actual Size”! (It must not be set to “fit” or “shrink oversized pages” or “custom scale”, because this will
change the size of your pattern pieces ).
page 2
Front and Back Views
A B C
Cuff self fabric, Cuff ribbed fabric, Cuff ribbed fabric,
single fold. single fold. double fold.
PALM CIRCUMFERENCE
Width of bare hand (entire Imperial 6 3/4 “ 7“ 7 1/4 “ 7 1/2 “ 7 3/4 “
circumference) just under
knuckles.
Metric 17.15 17.78 18.42 19.05 19.69
HAND LENGTH
Length of bare hand (tip of Imperial 6 3/4 “ 7“ 7 1/4 “ 7 1/2 “ 7 3/4 “
middle finger to bottom of
palm).
Metric 17.15 17.78 18.42 19.05 19.69
Wrist bone to tip of finger
Hand length
Hand
circu
mfer
ence
arou
nd p
alm
page 4
(Measure your bare hand,
without gloves).
Yardage and Trim Requirements
Oakhiti style 2981017 Double Duty Mittens, Women's
Recommended
fabric type for views
A, B, C mitten body Polar fleece, cuddle fleece, sweatshirt fleece with at least 15% width-
and A cuffs wise stretch*
Recommended
fabric type for views
B, C cuff Stretchy rib knit with at least 25% width-wise stretch*
other
Matching thread
This is the minimum amount your fabric must be able to stretch, in order to make this style.
15% stretch means 10" of knit fabric must be able to stretch to at least 11 1/2" across the
width of the fabric. (Perpendicular to the selvage). (25.4 cm. must stretch to 29.2 cm.).
25% stretch means 10" of knit fabric must be able to stretch to at least 12 1/2" across the
width of the fabric. (Perpendicular to the selvage). (25.4 cm. must stretch to 31.8 cm.).
page 5
Cutting Layout
View A
(With or without nap).
Note-cut hand and thumb sections twice.
selvage
1/3 yard long
fold
2 2
sides together).
3
selvage
1/3 yard long 3
fold
sides together).
Piece 2: cut one piece face up on fabric and the
other piece face down on fabric.
(Total 4 pieces, 2 plies each).
page 6
Cutting Layout
View B
(With or without nap).
Note-cut hand and thumb sections twice.
selvage
1/3 yard long
fold
2 2
sides together).
selvage
1/3 yard long
fold
sides together).
Piece 2: cut one piece face up on fabric and the
other piece face down on fabric.
(Total 4 pieces, 2 plies each).
selvage
1/3 yard long
fold
2 2
sides together).
selvage
1/3 yard long
fold
sides together).
Piece 2: cut one piece face up on fabric and the
other piece face down on fabric.
(Total 4 pieces, 2 plies each).
page 9
At the center, make a small snip through just the seam allow-
ance and serging stitch. (Don’t snip through your reinforce-
ment stitching).
3
Finger press your seam allowances in
opposite directions to the left and right
allowance)
5
Using a straight stitch, tack the
top edge closed across the
seam allowance to hold it in
place. Stitch about
1/2” (1.27 cm.) on each side of
the seam. (You don’t have to
tack the whole top, just tack
across the seam allowance).
6
Place a pin to mark the seam. Then fold
the cuff in half to find the opposite side,
and mark that with a pin too.
Then set aside the cuffs for a few minutes while you work on the mittens.
page 11
Stitch the thumb section to the hand section,
8 right sides together, and matching the notch.
(The curves on these pieces are different shapes,
so you will need to bend the fabric slightly while
sewing to make the edges fit together).
page 12
10
Sew a reinforcement stitch about 1/2” (1.27 cm.) on each side of the seam, along the seamline.
This is to hold your seam allowances in place and reinforce the stress point. You will need to
spread the curve of the thumb intersection apart while you stitch, since it is a very tight curve.
page 13
11
12
Open the bottom of the mitten and slide a prepared cuff inside. Match the seam of the cuff
to the seam of the outside section of the mitten (opposite from the thumb). Match the other
pin to the seam at the thumb. (The circumference of the cuff is slightly smaller than the
circumference of the mitten). Pin through all the layers to hold in place.
page 14
13
Stretch the cuff slightly as you sew. Serge around the seam through all layers.
If you are using cotton fleece, you can press the outside edges to flatten the seams. If you are
using polyester fleece, pressing is not recommended, it will be very easy to burn or melt your
fabric, or get “iron shine”. (If you do press, try it on a scrap first to make sure your iron won’t melt
the fabric).
It is very helpful to use a tool to push out the edges of the turned mitten. I like to use a butter
knife, inserted through the cuff opening. Run the rounded point end of the butter knife along all
the seam edges to help them lay flat.
page 15
Place the mittens on a sheet of wax paper to protect your work surface.
Apply some Puffy Paint to create a gripping surface on the palm of the right and left mittens.
Apply the paint in whatever design you like, you can get really creative with this!
Then, allow the paint to dry according to the package directions, before wearing the mittens.
page 16
15
VIEWS B and C
Fold the cuff in half, right sides together, and make
a straight stitch along the seamline.
(View B is pictured. View C is just like view B but
the cuff is longer so that it can be folded up to
create a double cuff ).
Turn the cuff right side out, and fold it in half to make a
tube with the seam allowances on the inside. Make sure
your seam allowances stay flat while you’re doing this. It
will be harder to flatten them out after you’ve sewn the
cuff on).
page 17
17
How to Use Double Duty Mittens
Whether you have a circulation disorder, or just really cold hands; you know how important it is to
keep warm when outside during cold weather. That’s what these mittens are for. They are meant to
be paired with knit gloves and heating packets to make them function most effectively.
You need these things in order to make the mittens function as “Double Duty”.
To use, first unwrap the heating packets and shake them up (or otherwise activate them according
to package directions). Put on the knit gloves. Then put on the Double Duty mittens over the top of
the gloves. Then, slip the heating packets inside the mittens, between the mittens and the gloves.
(This is why the mittens are generously sized-they are meant to be worn over the gloves, and you
need to be able to move the heat packet without taking off the mittens). The cuff of the mittens
keeps the heat packets from falling out. With the heat packets inside the mittens, they are close to
your hands (but not in direct contact) and you can scoot them around inside the mittens while
you’re wearing them, in order to put the heat wherever you need it most. You can also shake them
around to the back side of your hand whenever you need to grip something, like a doorknob. (Or,
since you also have the knit gloves on to protect you, you can take off the mitten-with the heat
packet still inside-for a few quick seconds if you need to grip something tricky like your keys).
The commercially made heating packets will wear out after a certain amount of exposure to oxygen.
(Around 10 hours). To make them last longer, I store them inside a lock-top plastic bag and just keep
the bag in my coat pocket. If you store them after use in an air-proof bag or container, they will, in
effect, “turn off” because they can’t get any more oxygen. Using this method I am able to make one
pair of heating packets last about a week before they wear out. (I normally wear my Double Duty
mittens about an hour per day). At less than a (U.S.) dollar per pair of heat packets, this is a very
cheap method of keeping your hands warm while driving!
page 18 Of course this is not a cure-all and is not meant to be construed as
medical advice. Please follow your doctor’s instructions if you have
medical issues.
Oakhiti 2981017 Pattern Piece List
Size View Piece Piece Pattern
number name grid
location
XS A2
S B2
L D2
XL E2
XS A3
S A3
L B3
XL D3
3 4 5
1 1 1 1 1
2 2 2
page 20
akhiti PDF patter�
PRINT THIS
PAGE FIRST!
PRINTER TEST Please print this square
SQUARE and make sure it measures
2”x2” EXACTLY to size
(5.08 x 5.08 cm) before printing
the rest of your pattern.
page 21
a1
lg=Large
sm=Small
page 22
xl=Extra Large
med=Medium
xs=Extra Small
PATTERN SIZE COLOR KEY
Piece 3
med
cuff view A
lg
b1
1
page 23
xs
Oakhiti style 2981017
Double Duty Mittens
(Women)
sm
Piece 4
med
cuff view B
lg
c1
A
page 24
d1
1
A
Oakhiti style 2981017
Double Duty Mittens
(Women)
page 25
Piece 5
cuff view C
cut 2 rib fabric
1/4” seams
xs
sm
med
lg
xl
e1
Oakhiti style 2981017
Double Duty Mittens
(Women)
Piece 1
xs
C Copyright 2017
Oakhiti LLC
page 26
a2
Oakhiti style 2981017
Double Duty Mittens
(Women)
Piece 1
sm
C Copyright 2017
Oakhiti LLC
page 27
b2
Oakhiti style 2981017
Double Duty Mittens
(Women)
Piece 1
med
C Copyright 2017
Oakhiti LLC
2 page 28
c2
Oakhiti style 2981017
Double Duty Mittens
(Women)
Piece 1
lg
C Copyright 2017
Oakhiti LLC
page 29
d2
017
Oakhiti style 2981
tens
Double Duty Mit
(Women)
Piece 1
h a n d (ricall views)
cut 4 shell fab
1/4” seams
xl
C Copyright 2017
Oakhiti LLC
2 page 30
e2
Oakhiti LLC
C Copyright 2017
sm
1/4” seams
cut 4 shell fabric
(all views)
thumb
Oakhiti style 2981017
Double Duty Mittens Piece 2
(Women)
(Women)
Piece 2 Double Duty Mittens
thumb
Oakhiti style 2981017
(all views)
cut 4 shell fabric
xs
1/4” seams
C Copyright 2017
Oakhiti LLC
page 31
a3
Oakhiti LLC
C Copyright 2017
lg
1/4” seams
cut 4 shell fabric
(all views)
thumb
Piece 2
Piece 2
thumb
(all views)
cut 4 shell fabric
1/4” seams
med
C Copyright 2017
Oakhiti LLC
page 32
b3
Oakhiti style 2981017
Double Duty Mittens
(Women)
Piece 2
thumb
(all views)
cut 4 shell fabric
1/4” seams
xl
C Copyright 2017
Oakhiti LLC
3 page 33
c3
How to print and assemble this pattern
Never used a PDF pattern before? Please visit my website
blog article, How to Print and Assemble PDF Sewing
Patterns for complete instructions. (Don't worry, it’s easy!)
Happy Sewing!
page 34