Академический Документы
Профессиональный Документы
Культура Документы
Remarks
Sign of sender Sign of lab in charge
PTH CONSULTANCY SERVICS LLP
Specific Gravity
Temperature ºC
Bottle No.
Weight Of Sp. Gr. Bottle (W1) (G) 29.001 28.81 29.237
Weight Of Specific Gravity Bottle + Soil (W2) (G) 39.341 39.062 42.283
Weight Of Sp. Gr. Bottle + Soil + Water (W3) (G) 84.614 85.478 86.776
Weight Of Sp. Gr. Bottle + Water (W4) (G) 79.063 79.015 79.031
Specific Gravity Of Soil At Temperature ºC
G = (W2 - W1 )/(W4 – W1) – (W3 – W2 ) 2.159 2.706 2.461045
Average G 2.44196228
Free Swell
Lab No. 1 2 3 4
Initial Vol. of Sample in Kerosine (ml) 10 10 10 10
Final Vol. of Sample in Water (ml) 14 12 12.5 13
Swell index % 40 20 25 30
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
Liquid Limit
Weight of Weight of Weight of Moisture Liquid
Penetration Limit
Lab. No. Dish No. Dish: Dish + wet Dish + dry Content
D (mm) WL (%)
W1(g) soil : W2 (g) soil : W3 (g) WN (%)
5 18.907 65.570 54.102 24.900 32.58% 30.01%
Plastic Limit
Weight of Weight of Weight of Avarage Plasticity
Plastic Limit
Lab. No. Dish No. Dish: Dish + wet Dish + dry Plastic Limit Index (Ip)
Wp (%)
W1(g) soil : W2 (g) soil : W3 (g) WP (%) = WL-Wp
11 19.102 20.377 20.130 24.03% 23.59% 6.42%
20 18.516 19.999 19.721 23.07%
1 16.649 17.438 17.287 23.67%
Shrinkage Limit
Mass of empty mercury dish, M1 (gm)
Mass of mercury dish, with mercury equal to volume of the shrinkage dish, M2 (gm)
Mass of mercury, MMercury = M2 - M1 (gm) 0
Volume of shrinkage dish V1= MMercury/13.6 (ml) 0
Mass of shrinkage dish, M3 (gm)
Mass of shrinkage dish + wet soil, M4 (gm)
Mass of wet soil M5= M4 – M3 (gm) 0.00
Mass of shrinkage dish + dry soil, M6 (gm)
Mass of dry soil, MSoil= M6 – M3 (gm) 0.00
Mass of mercury dish + mercury equal to in volume of dry pat, M7 (gm)
Mass of mercury displaced by dry pat, M8 = M7 – M1 (gm) 0.00
Volume of dry pat V2= M8/13.6 (ml) 0
Shrinkage limit,ws = (M1 - Msoil) - (V1 - V2) ρw / Msoil * 100 % #DIV/0!
Shrinkage ratio, SR = Msoil / V2 * ρw #DIV/0!
Volumetric shrinkage, Vs = V1 - V2 / V2 *100 #DIV/0!
RESULT SUMMERY
LIQUID LIMIT (WL) PLASTIC LIMIT (WP) PLASTICITY INDEX (Ip)
0
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
Hydrometer No.
Soil passing 75 micron sieve (%) Height (h) (cm):
Sample (passing 75 mic) Wd (g) Height H1 (cm):
Specific Gravity of Sample (Gs) Height H2 (cm):
Temperature (oC) Readings Diff.0.995-1.030 :
Vol. of Hydrometer (Vh) (ml) Effective height of each hydrometer unit:
Meniscus correction (Cm)
Disperging Agent Correction (Cd)
Temperature Correction (Ct)
M2 = Gsx100/(Wd*(Gs-1))
Measuring Jar No.
Area of Jar (A) (cm2)
Hydrometer
Rh Rh1
Sr. No. Time (min) Reading Hr (cm) D (mm) N (%) N' (%)
[(2)+Cm] [(3)+(Cd+Ct)]
(Rh')
[1] [2] [3] [4] [5] [6] [7] [8]
1 0.5 0.00000
2 1 0.00000
3 2 0.00000
4 4 0.00000
5 8 0.00000
6 15 0.00000
7 22 0.00000
8 60 0.00000
9 142 0.00000
10 202 0.00000
11 262 0.00000
12 360 0.00000
13 1440 0.00000
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
DENSITY
Determination No. 1 2 3 4 5 6
Mass of Mould: M1 (g) 3760 3760 3760 3760 3760
Mass of Mould + Compacted Soil: M 2 (g) 5550 5720 5810 5840 5810
Mass of Compacted Soil, M= M2-M1 (g) 1790 1960 2050 2080 2050
Water added (%) 12 14 16 18 20
Wet Density: ρm (g/cc) 1.79 1.96 2.05 2.08 2.05
Dry Density: ρd (g/cc) 1.59 1.71 1.75 1.74 1.67
MOISTURE CONTENT
Crucible No. 6 7 4 2 9
Wt. of Crucible: (g) 19.121 18.702 17.186 18.176 16.14
Wt. of Crucible + wet Soil: (g) 78.86 69.93 75.213 82.562 79.08
Wt. of Crucible + dry Soil: (g) 71.902 63.232 66.677 71.956 67.366
Moisture Content, w (%) 13.19 15.05 17.25 19.73 22.87
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
OBSERVATION & CALCULATION SHEET FOR
PTH_OBS_14
Direct Shear Test
Inward No: Starting date:
Lab No.: Complete date:
BH/Sample No. Depth (m)
Type of test:- (a) Unconsolidated (b) Consolidated (c) Consolidated drained Sample: UDS Remolded
undrained test undrained test test Strain Control method
Rate of strain (mm/min): 1.25 Thickness (cm): 2.50
Dimensions (cm x cm): 6X6 Area of specimen (Ao) (cm ):
2
36
Volume of specimen (cm3): 90 Proving Ring Constant (f):
UDS/Remould Sample: FDD (g/cc): FMC (%):
Initial Consolidation Time :- 45 Min. (for Consolidated Undrained Test)
Shear Parameter
0.80
0.70
f(x) = 0.227265594602069 x + 0.259650672861014
Shear Stress ( Kg/cm2)
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20
Normal Stress (Kg/cm2)
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2019 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
Stress (s1-s3)
f(x) = 0.245632722624627 x + 0.098039341002698 0.80
0.70
0.70
0.60
0.60
0.50
0.50
0.40
0.40
0.30
0.30
0.20
0.20
0.10
0.10
0.00
0.00 0.50 1.00 1.50 2.00 2.50 3.00 0.00
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
1/2(s1+s3) Strain
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 3 of 3
PTH CONSULTANCY SERVICS LLP
OBSERVATION & CALCULATION SHEET FOR TEST ON SOIL
PTH-OBS-16
Unconfined Compressive Strength
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
OBSERVATION & CALCULATION SHEET FOR TEST ON SOIL
PTH-OBS-17
Consolidation
Tested By Checked By
Amed No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
OBSERVATIO & CALCULATION SHEET FOR TEST ON SOIL
PTH_OBS_18 California Bearing Ratio
Moisture Content
Dish No.
Wt. of Dish: (g)
Wt. with soil: (g)
Wt. with dry soil: (g)
Moisture (%)
Page 1 of 1
PTH CONSULTANCY SERVICS LLP
Normal Stress-σ3 (Cell Pressure) 0.5 kg/cm2 1 kg/cm2 1.5 kg/cm2 Deformation rate:- (mm/min) 1.25
Proving Ring Constant : 0.698
Corrected Load Max. Max. Load Max. Displacement dial count (mm) 0.01
Deflection area (Ac) cell Load cell Load cell Load cell cell Load cell Type of Specimen: UDS / Remolded
Time (min.) dL cm2 Reading Reading Reading Reading Reading Reading Type of Test UU
0.0 0.0 11.341 0.000 0.000 0.000
0.5 0.063 11.435 4.385 4.691 6.628 Pre Shear Data (for UDS)
1.0 0.125 11.531 5.404 6.220 11.013 Initial Dia.-D (cm): 3.80
1.5 0.188 11.628 5.914 7.138 12.746 Initial Length -Lo (cm): 7.60
2.0 0.250 11.727 6.322 7.852 14.174 Initial Area-Ao (cm2): 11.34
2.5 0.313 11.827 6.526 8.260 14.582 Initial Volume-Vo (cm3): 86.20
3.0 0.375 11.930 6.730 8.566 15.092 Wet Weight (g):
3.5 0.438 12.034 6.934 9.177 15.704 Filed Dry Density (gm/cc)
4.0 0.500 12.140 7.138 9.279 16.519 Filed Moisture Content (%)
4.5 0.563 12.247 7.240 9.279 16.723
5.0 0.625 12.357 7.240 9.687 16.825 Remolding of Specimen
5.5 0.688 12.469 7.444 10.197 17.641 Soil Dry density-D (g/cc):
6.0 0.750 12.583 7.444 10.197 17.743 Desired Moisture Cont. (%):
6.5 0.813 12.699 7.546 10.401 18.151 Volume of mould-Vo (cm3): 86.20
7.0 0.875 12.817 7.750 10.503 18.151 Wt. of dry soil (a= D*Vo) (g):-
7.5 0.938 12.937 7.852 10.605 18.355 Water to be added (ml):
8.0 1.000 13.059 7.852 10.707 18.559
8.5 1.063 13.184 8.158 11.115 18.661
9.0 1.125 13.311 8.158 11.319 18.967
9.5 1.188 13.441 8.260 11.421 19.578
10.0 1.250 13.573 8.362 11.727 19.578
10.5 1.313 13.708 8.770 11.727 19.884
11.0 1.375 13.846 8.770 11.829 19.986
11.5 1.438 13.986 8.770 11.931 20.496
12.0 1.500 14.130 9.075 12.135 20.802
Tested By Checked By
Amend No: 00 Amend Date: -- Prepared By: Approved By: Issued By:
Issue No: 01 Issue Date: 15.02.2020 Quality Manager Director Quality Manager
Page 1 of 3