0 оценок0% нашли этот документ полезным (0 голосов)
21 просмотров1 страница
This document summarizes the properties and specifications of different grades of PVC wire and cable insulation and sheathing compounds. There are grades for general purpose insulation up to 90°C as well as sheathing compounds for protection up to 90°C. Each grade lists properties like density, hardness, thermal stability, tensile strength, aging requirements and test values. The compounds are processed at temperatures between 150-185°C and packaged in 25kg sacks palletized for 500kg total.
This document summarizes the properties and specifications of different grades of PVC wire and cable insulation and sheathing compounds. There are grades for general purpose insulation up to 90°C as well as sheathing compounds for protection up to 90°C. Each grade lists properties like density, hardness, thermal stability, tensile strength, aging requirements and test values. The compounds are processed at temperatures between 150-185°C and packaged in 25kg sacks palletized for 500kg total.
This document summarizes the properties and specifications of different grades of PVC wire and cable insulation and sheathing compounds. There are grades for general purpose insulation up to 90°C as well as sheathing compounds for protection up to 90°C. Each grade lists properties like density, hardness, thermal stability, tensile strength, aging requirements and test values. The compounds are processed at temperatures between 150-185°C and packaged in 25kg sacks palletized for 500kg total.
GRADES TPS 70 NT / TPS 80 NT / TPS 80B NT / TPS 90 NT / TPI 70 NT TPI 70F NT TPI 90F NT BK BK BK BK / RD General General purpose Heat Resistant General General General DESCRIPTION General purpose purpose Flexible Flexible purpose purpose purpose IS 5831 TYPE - A TYPE - A TYPE - C ST1 ST1 ST1 Classification IEC TYPE - A ST1 ST1 ST2 BS TI1 TI2/TM2 TI3/TM3 ST1/TM1 ST1/TM1 ST2/Type-9 Operating Temp. Max. 70 70 90 70 80 80 90 Color NAT NAT NAT NAT / BK NAT / BK NAT / BK NAT / BK / Red Properties Test Tests Unit Typical Values Method ASTM Density g / cm3 1.45 1.38 1.39 1.64 1.49 1.59 1.5 to 1.53 D792 Shore ASTM Hardness 91 88 89 90 87 89 90 A D2240 Minimum Thermal Stability MinutesIS 5831 120 115 240 65 65 65 65 @ 200 OC Tensile Strength (min.) * Mpa IS10810-7 16 17 16 14 16 15 15 Elongation at break (min.)* % IS10810-7 250 250 250 225 250 250 250 Aging Temp. for 7 days OC 80 80 135 80 80 80 100 Duration of ageing Days 7 7 10 7 7 7 7 Variation after aging 5 Tensile Strength * % IS10810-7 ± 15 ± 15 ± 15 ± 15 ± 15 ± 15 ± 15 Elongation at break * % IS10810-7 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 Loss of mass (max.) mg/cm2IS10810-7 2 2 1.5 2 2 2 1.5 * Determined on 0.8 mm extruded tape. Process Temp. range 150 to 185 OC (Pre-drying at 70 OC for 20 min. is preffered for better performance ) PACKING : 25 kg sacks palletized, net weight 500 kg and stretch wrapped for environment protection.
ChatGPT Money Machine 2024 - The Ultimate Chatbot Cheat Sheet to Go From Clueless Noob to Prompt Prodigy Fast! Complete AI Beginner’s Course to Catch the GPT Gold Rush Before It Leaves You Behind