Академический Документы
Профессиональный Документы
Культура Документы
com
Double Block
a n d B l e e d Va l v e s
L a r g e - B o re T h re e - P i e c e B o l t e d D e s i g n
Features
■ Process to instrument interface in one compact
ball / needle / ball valve assembly
■ Suitable for process interface vent and drain connections
■ Three-piece bolted-body construction in accordance with
ASME VIII provides fewer potential leak points and reduced
size and weight compared to conventional installations
■ 1, 1 1/2, and 2 in. (25, 38, and 50 mm) bore options
available
■ Flanged connections in accordance with ASME B16.5 RF
and RTJ
■ Pressure ratings in accordance with ASME B16.34 Class
150 through 2500
Anti-tamper vent valve shown.
■ Fire-tested design in accordance with BS 6755 part 2
■ Temperature range from –58 to 400°F (–50 to 204°C) for
stainless steel and duplex valve assemblies
■ Temperature range from –51 to 400°F (–46 to 204°C) for Ball Ball
carbon steel valve assemblies
■ Anti-blowout valve stems and needles
■ Non-rotating hardened needle vent valve
Needle
■ Hydrostatic test certificates complete with full chemical and
physical material certifications available
Dimensions
Dimensions, in inches (millimeters), are for reference only and RF x RF
Flange
are subject to change.
Flange ASME L
Size Bore Class Length Weight
in. in. (mm) lb in. (mm) lb (kg)
150 10.7 (272) 33.1 (15.0)
300 11.0 (279) 36.8 (16.7)
1 1 600 11.5 (292) 38.6 (17.5)
(DN 25) (25.4)
900/1500 14.3 (363) 46.7 (21.2)
2500 14.8 (376) 53.4 (24.2)
150 14.2 (361) 54.5 (24.7)
300 14.4 (366) 59.7 (27.1)
ISOLATE
1 1/2 1 1/2 600 15.1 (384) 61.5 (27.9)
(DN 40) (38.1)
900/1500 15.8 (401) 77.4 (35.1)
2500 18.2 (462) 100 (45.5)
150 15.4 (391) 106 (48.2)
L
Overall Length 300 15.7 (399) 111 (50.3)
2 2
(DN 50) (50.8) 600 16.4 (417) 113 (51.1)
900/1500 18.9 (480) 147 (66.8)
Ordering Information
VB03 01 SA D 1 C 1 3 C A
Series Additional Features
Bolted body construction A = Nonlockable levers, anti-tamper vent➀
B = Lockable levers, anti-tamper vent➀
Configuration C = Nonlockable levers, bar-handled vent
Full bore ball / needle / ball (block / bleed / block) D = Lockable levers, bar-handled vent
Dimensions
Dimensions, in inches (millimeters), are for reference only and RF x RF
Flange
are subject to change. Flange ASME
Size Bore Class L Weight
in. in. (mm) lb in. (mm) lb (kg)
150 11.0 (279) 36.1 (16.4)
300 11.2 (285) 44.5 (20.2)
1 1/2 1 600 11.9 (301) 46.3 (21.0)
(DN 40) (25.4)
900/1500 14.6 (370) 57.8 (26.2)
2500 15.6 (396) 80.7 (36.6)
150 14.3 (364) 56.7 (25.7)
300 14.6 (372) 65.7 (29.8)
ISOLATE
2 1 1/2 600 15.5 (394) 68.8 (31.2)
(DN 50) (38.1)
900/1500 16.3 (415) 96.6 (43.8)
2500 18.7 (475) 126.8 (57.5)
150 15.7 (400) 116 (52.7)
L
Overall Length 300 16.1 (410) 125 (56.7)
3 2
(DN 80) (50.8)
600 16.9 (428) 129 (58.7)
900 17.4 (441) 152 (68.9)
1500 19.7 (500) 187 (84.7)
Ordering Information
VB03 02 SA D 1 C 1 3 C A
Series Additional Features
Bolted body construction A = Nonlockable levers, anti-tamper vent➀
B = Lockable levers, anti-tamper vent➀
Configuration C = Nonlockable levers, bar-handled vent
Reduced Bore Ball / Needle/ Ball D = Lockable levers, bar-handled vent
(Block / Bleed / Block)
Vent Connection
Materials 1/2 in. female NPT
SA = 316 stainless steel
CA = Carbon steel Outlet Connection
DA = Duplex stainless steel Flange (same as process)