Академический Документы
Профессиональный Документы
Культура Документы
com
F o r g e d - B o d y N e e d l e Va l v e s
10 000 psig (690 bar)
F10 Series
■ Working pressures up to 10 000 psig (690 bar)
■ Straight, angle, and oblique configurations
■ Temperatures up to 400°F (204°C) with PTFE packing;
up to 850°F (454°C) with graphite packing
■ F316/F316L stainless steel forged body
■ Non-rotating, back-seated needle design
■ Stem threads above packing protected from system media
■ Hydrostatic test certificates complete with full chemical and physical
material certifications available
2 Forged-Body Needle Valves—10 000 psig (690 bar)
Features
Stainless steel
handle with square drive
stem and locknut
Shroud protects stem threads
against ingress of dirt and dust
One-piece stainless
steel forged body
0.8
Flow Coefficient (Cv) Factor
0.6
4.33 (110)
0.4
0.2
0
0 1 2 3 4 5 6 3.03
(77.0)
Number of Turns Open
Orifice = 0.27 (7.0)
Ordering Information
FS4NAT
Basic Series Number Handle
Bar handle
Body Material and Pattern
316 stainless steel forging, straight pattern
Packing
End Connection A = PTFE
1/2 in. NPT female inlet and outlet C = Graphite
Forged-Body Needle Valves—10 000 psig (690 bar) 4
0.8
Flow Coefficient (Cv) Factor
0.6
0.4
0.2
(47.5)
1.87
0
0 1 2 3 4 5 6
4.80
(122)
0.8
Flow Coefficient (Cv) Factor
0.6
0.4
(92.0)
3.63
0.2
0
0 1 2 3 4 5 6
Ordering Information
FYN44NAT
Basic Series Number Handle
Bar handle
Body Material and Pattern
316 stainless steel forging, oblique pattern Packing
A = PTFE
End Connection C = Graphite
1/2 in. NPT male inlet / female outlet
Options and Accessories
Carbon steel is available upon request. For this and other
options and accessories, contact your independent Swagelok
sales and service representative.