Академический Документы
Профессиональный Документы
Культура Документы
BXM 2200
Binary Input and Relay Output Module
Type: 810.001.220
General:
This module is:
• a binary input module, which contains 4 groups of 4 channels, each of the 4 groups are isolated
binary input measurement channels, available in the connectors X1 to X4 and
• 8 relay output modules, with change over contacts, available in the connectors X5 to X8.
The digital bus input is at the connector X9 and the extension connector to further modules is at the
connector X10
At an Interface Module IFM 2200 a total of up to 8 modules of this family can be placed in any combina-
tion.
The physical layout is implemented in a module 125,4mm X 216mm and the module shall be mounted
on a DIN rail.
© SAM Electronics GmbH
2 Technical data
2.1 Electrical
Power consumption:
5V 25 mA
24 V 160 mA (External sensor load + LED
indicator)
24 V SW 130 mA(The load is 130mA total for the
relay coils; the load distribution is de-
pendent of the relay coil voltage selector)
Indicators:
5V Green LED
24 V Green LED
24 V SW Green LED
Digital input channels 1 Green LEDs
to 16
Digitaloutput channels 1 Green LEDs
to 8
Voltages/Currents:
LOW signal 0 to 4 V
0 to 0,7 mA
Undefined 4,1 to 11,9 V
0,8 to 2,4 mA
HIGH signal 12 to 32 V
2,5 to 7 mA
Sensor voltage +24 V
10 mA max for each channel
Isolation voltage 50 VDC min 1 MΩ from:
Group to group to digital bus with 5V
© SAM Electronics GmbH
Contact rating:
32V DC 6A
250V AC 6A (Cosϕ = 1)
250V AC 1A (Cosϕ = 0,4)
1500VA
Isolation:
2.2 Mechanical
Connectors:
*) VV = Latest Version
Interconnection cables:
Switches:
Dimensions:
Length 125,4 mm
Width 216 mm
Heigth 62 mm above DIN mounting rail
Weight 525 g
Other:
2.3 Environmental
Operating temperature 0 to 70 °C
Storage temperature -25 to 70 °C
Specifications IACS E10 Revision 5 (Dec. 2006),
IEC 60945 Revision 4 (Aug. 2002)
© SAM Electronics GmbH
3 Circuit Diagram
© SAM Electronics GmbH
VV*