0 оценок0% нашли этот документ полезным (0 голосов)
639 просмотров7 страниц
This document contains tool box talks for various construction activities including reinforcement work, shuttering and formwork, concreting, concrete repairing works, block work, plastering, and painting. For each activity, it lists important points to check such as having approved drawings, ensuring the work area is clean and prepared, using proper materials and installation techniques, conducting inspections, and more. The overall purpose is to review critical safety and quality checks for common construction tasks.
This document contains tool box talks for various construction activities including reinforcement work, shuttering and formwork, concreting, concrete repairing works, block work, plastering, and painting. For each activity, it lists important points to check such as having approved drawings, ensuring the work area is clean and prepared, using proper materials and installation techniques, conducting inspections, and more. The overall purpose is to review critical safety and quality checks for common construction tasks.
This document contains tool box talks for various construction activities including reinforcement work, shuttering and formwork, concreting, concrete repairing works, block work, plastering, and painting. For each activity, it lists important points to check such as having approved drawings, ensuring the work area is clean and prepared, using proper materials and installation techniques, conducting inspections, and more. The overall purpose is to review critical safety and quality checks for common construction tasks.
☞ Check the area is clean ☞ Check any concrete slurry leakage need to be removed ☞ Check any excess concrete, construction joint preparation to be done ☞ Check the brand and diameter of the rebar ☞ Check the rebar’s are neat and clean, no damages in the rebar ☞ Check the cut & bend rebar tag and verify the location ☞ Check placement of rebar for position, spacing, diameter, etc., ☞ Check necessary additional rebar for chair, gauge, links, etc., ☞ Check the lapping as per drawing & standards ☞ Check the size of the rebar as per the drawing ☞ Check the additional bars as per the drawing/provided ☞ Check the cut out opening as per drawing ☞ Check the cut out bars provided as per GA drawing (diagonals, etc.,) ☞ Check the binding wire tied as agreed and continues ☞ Check the binding wire knot and bend inside the rebar ☞ Check no binding wire cut or left inside the concrete area ☞ Check the insert are provided as per the approved drawing ☞ Check inspection completed and approved for further work Tool box talk – Shuttering and formwork
☞ Check the drawings are approved
☞ Check the base area firm & stable to keep the scaffolding ☞ Check the adequate supports provided as required and drawing ☞ Check the approval/clearance for formwork ☞ Check there is no gap in the formwork and it is water tight ☞ Check stopper/CJ provided as required ☞ Check the CJ provided as per the approved drawing ☞ Check the cut outs provided as per the drawing ☞ Check the side supports are provided and intact & rigid. ☞ Check the Hyrib provision and support ☞ Check the dimension of formwork as per drawing ☞ Check the alignment, verticality and acceptable ☞ Check the availability of shuttering foreman during concrete ☞ Check the availability of worker to tab the shutter during concrete ☞ Ensure the cleaning and removal of debris, binding wire, etc., ☞ Check the surveyor cleared for level and coordinates ☞ Check the provision of anchor bolt and cleared ☞ Check the requirement of water bar/fuko VT as per drawing. ☞ Check the waterproofing done as per the drawing Tool box talk – Concreting
☞ Check the drawings are approved
☞ Check the base area firm & stable to keep the scaffolding ☞ Check MEP clearance to proceed for concrete ☞ Check structural steel, survey clearance if required ☞ Check the all the stakeholders signed the checklist ☞ Check the area is clean and construction joint acceptable ☞ Check the bonding agent applied at CJ ☞ Check the approval from client to proceed for concrete ☞ Check the TBT conducted for concreting works ☞ Check for any additional information related to concrete ☞ Check the concrete grade as per drawing ☞ Check the concrete slump & temp. is cleared by 3rd party technician ☞ Check concrete placer pump accessible in all the area ☞ Check availability of mason, vibrator, needle and necessary tools ☞ Check the pouring sequence discussed within the team ☞ Check the concrete pouring done layer by layer ☞ Check the concrete compacted uniformly ☞ Check poker needle reached all the area ☞ Check concrete finished up to required level ☞ Check finishing of concrete as required ☞ Check the rebar/anchor bolt, etc., protected and cleaned ☞ Check the curing arrangement sufficient Tool box talk – Concrete repairing works
☞ Check the area marked as reported
☞ Check availability of repairing material ☞ Check the necessary IR raised for repairing/registered ☞ Check the TBT conducted as per the approved method statement ☞ Check grind cut done to define edges of repair ☞ Check all the loose materials are chipped off concrete surface sound ☞ Check the light tools have been used for chipping ☞ Check any cement laitance need to be removed ☞ Check the area is cleaned by air ☞ Check the repair area washed with water and soaked as required ☞ Check the surface is accepted to proceed for repairing ☞ Check the bonding agent applied and it is sticky to receive repair material ☞ Check the repairing material mixed as per the recommendation ☞ Check the repair material applied by trowel continuously ☞ Check the formwork if repairing do be done by pouring ☞ Check the joints are matching with the existing concrete surface ☞ Check any grinding required to smooth the surface ☞ Check curing requirement and arranged Tool box talk – Block work