Академический Документы
Профессиональный Документы
Культура Документы
LG Wi-Fi
SOUND BAR
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
SL7Y (SL7Y, SPL5B-W)
www.lg.com
1901_Rev01 Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2 Getting Started
Getting Started
1 Refers to stand-by.
! Refers to “ON” (power).
Table of Contents
1
3 Operating 4 Troubleshooting
31 Using a Bluetooth Wireless Technology 39 Troubleshooting
31 – About Bluetooth 39 – General
31 – Bluetooth profiles 41 – Network
2
31 – Listening to Music of a Bluetooth Device 41 – Application
33 – Controls connected Bluetooth device 42 – NOTES to use wireless
33 – Bluetooth connection lock (BT LOCK) 42 – NOTES to release Demo mode
34 USB operations
35 Other operations
5 Appendix 3
35 – Using your TV remote control
36 – AUTO POWER On/Off 43 File requirement
37 – Auto function change 43 Trademarks and licenses
38 Standby mode 44 Specifications
38 – Standby mode 46 Handling the Speaker 4
38 – Network standby mode 46 Important Information Relating to Network
38 – Bluetooth standby mode Services
38 Reset the Speaker 47 TERMS OF USE
Some of the content in this manual may differ from “LG Wi-Fi Speaker” app depending on the application’s
version.
6 Getting Started
Introduction
Symbol used in this manual
1
,,Note
Getting Started
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started 7
Front panel
Getting Started
A Remote sensor
Display Window
B -- Display window will be darkened automatically if there is no key input for 15 seconds.
When you press any button, the display window will brighten.
1 (Standby)
-- Switches the unit ON or OFF.
F (Function)
-- Select the function and input source by pressing F repeatedly.
o/p (Volume)
-- Adjusts volume level.
(Wi-Fi)
-- Selects Wi-Fi function.
, This unit will turn itself off to save electric consumption when the main unit is not connected to an external
device and is not used for 15 minutes.
When network is connected, the speaker switches to the network standby mode.
If network is disconnected, the speaker switches to the standby mode.
8 Getting Started
Rear panel
1
Getting Started
DC IN
A -- Connect to the AC adapter.
USB Port
B -- Connect USB memory device to the USB port on the back of the unit.
OPTICAL IN
C -- Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
HDMI IN
D -- Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device.
You can enjoy the sound and picture from HDMI connection on an external device.
(TV ARC) HDMI OUT
E -- Connect the (TV ARC) HDMI OUT jack on the back of the unit to ARC jack on the TV.
Getting Started 9
Remote control
Replacement of Battery 1
Remove the battery cover on the rear of the remote
Getting Started
control, and insert the battery with 4 and 5
matched correctly.
1 (Standby)
-- Switches the unit ON or OFF.
a yy Network Standby On/Off: It allows the unit to switch to standby mode while maintaining a
network connection. (Page 38)
To turn on Network Standby function, Press 1.
To turn off Network Standby function, press 1 for about 3 seconds.
VOL (Volume) o/p
b
-- Adjusts speaker volume.
C/V (Skip)
c
-- Press C or V to go to next or previous file.
N (Play/Pause)
-- Starts playback. / Pauses playback.
d yy BT (Bluetooth) connection Lock: It allows you to connect a Bluetooth device only on Bluetooth
and LG TV functions. (Page 33)
To turn on or off the Bluetooth connection lock, press and hold N for about 3 seconds and press it
again in BT (Bluetooth) function.
10 Getting Started
SOUND EFFECT
-- Selects a sound effect mode by using SOUND EFFECT.
On Display Description
1
Analyzes the property of the input sound and provides the
ASC (Adaptive Sound Control)
Getting Started
yy TV remote: It allows you to control the volume of this unit by your TV remote control even by other
company’s product. (Page 35)
To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and
press it again.
, Supported TV brands
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio
(Sound tuning)
-- Adjusts sound level of each speaker.
Select the speaker you want to adjust by using and adjust the sound level by using VOL o/p.
, Adjusting rear speakers level is applied only when the rear speakers are connected.
yy Surround sound: It allows you to enjoy surround sound with rear speakers. (Page 18)
To turn on or off the surround sound, press and hold for about 3 seconds and press it again.
Getting Started 11
F (Function)
g
-- Select the function and input source by pressing F repeatedly.
[ (Mute)
h
-- Press [ to mute your unit. To cancel it, press [ again.
1
Getting Started
J (Information)
-- You can display various information of the input source by pressing J.
-- OPT (Optical)/ARC/HDMI (HDMI IN): Audio format
-- BT (Bluetooth): Connected Bluetooth device name
-- USB: File information contained on a USB.
i yy Auto Power ON/OFF: It allows the unit to turn on and off automatically by input signals: Optical, LG
TV, Bluetooth o r “LG Wi-Fi Speaker” app (Page 36)
To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.
yy BT Standby On/Off: It allows the unit to switch to standby mode while maintaining Bluetooth
connection. (Page 38)
To turn on or off BT Standby function, set the volume to a minimum in advance. Press and hold p
on the unit and J on the remote control for about 3 seconds and then press J again.
REPEAT
j
-- Press REPEAT to select desired repeat or random mode.
FOLDER W/S
k
-- Searches a folder on USB device.
12 Getting Started
,,Note
yy If the sound bar covers the remote sensor of
the TV, please separate distance between the
sound bar and TV by 10 ~ 15 cm or more.
yy The illustration above may differ from actual
units.
yy You can enjoy surround sound by using
Wireless Rear Speaker kit. Wireless Rear
Speakers Kit sold separately (SPK8-S).
Getting Started 13
Mounting the main unit 1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
on a wall the position.
1
You can mount the main unit on a wall.
Getting Started
2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
>>Caution sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.
Because it is difficult to make a connection after
installing this unit, you should connect the cables
before installation.
Preparation materials
Unit
Wall plug
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
14 Getting Started
1
Getting Started
,,Note
To detach the unit, perform it in reverse order.
>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the cause
of personal injury.
yy Do not hang onto the installed unit and avoid
any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
Connecting 15
Connecting
3. Plug the AC power cord into an AC outlet.
,,Note
yy After all connections are completed, you can
arrange cables as needed.
yy Cable ties are not supported. >>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
16 Connecting
Connecting
-- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
-- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
!1 m
,,Note
You need to purchase the wireless rear speakers
kit (SPK8-S) to enjoy surround sound.
18 Connecting
2
LED indicator of wireless receiver
Connecting
Surround function ON
Output
Sound Effect Input
No rear speakers Rear speakers connected
2.0 Ch
ASC
5.1 Ch
2.0 Ch 2
STANDARD
Connecting
5.1 Ch
2.0 Ch
DTS VIRTUAL: X
5.1 Ch
Output
Sound Effect Input
No rear speakers Rear speakers connected
2.0 Ch
ASC
5.1 Ch
2.0 Ch
STANDARD
5.1 Ch
2.0 Ch
DTS VIRTUAL: X
5.1 Ch
20 Connecting
!1 m
Connecting 21
Connecting
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
Make one of the following connections, depending on
the capabilities of your equipment.
Optical cable
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
According to TV Specifications, the volume
and mute of this unit synchronize with TV.
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly. yy When the connection fails, make sure of the
condition of the TV and power.
You can see “OPT” on the display window if
connecting normally between this unit and your yy Make sure of the condition of this unit and
TV. the connection in the cases below when using
LG Sound Sync.
,,Note -- The unit is turned off.
yy Before connecting the optical cable, be sure
-- Changing the function to the others.
to remove the protection plug cover if your
cable has the cover. -- Disconnecting the optical cable.
yy You can enjoy the TV audio through the yy The amount of time to turn off this unit is
speakers of this unit. In the case of some TV different depending on your TV when you set
models, you must select the external speaker AUTO POWER function to ON.
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit:
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
yy If this unit is connected by OPTICAL and ARC
at the same time, the ARC signal is a high
priority.
22 Connecting
3. Turn on the unit by pressing 1. yy If your TV and this unit are connected through
LG Sound Sync (Wireless), this unit will be
4. Select the input source to OPT/HDMI ARC by Network standby mode regardless of the
pressing F repeatedly. status of network connection when this unit
You can see “LGOPT” on the display window if is turned off.
connecting normally between this unit and your TV.
,,Note
Details of TV setting menu vary depending on
the models of your TV.
Connecting 23
Connecting
function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High Speed
HDMI cable HDMI™ cable with Ethernet).
-- You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports ARC function
using an HDMI cable.
-- You can connect only one Sound bar to TV
compatible with ARC.
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly.
You can see “ARC” on the display window if
What is SIMPLINK?
connecting normally between this unit and your
TV.
,,Note
yy You can enjoy the TV audio through the Some functions of this unit are controlled by the
speakers of this unit. In the case of some TV TV’s remote control when this unit and LG TV’s with
models, you must select the external speaker SIMPLINK are connected through HDMI connection.
option from the TV menu. (For details,
reference your TV user manual.) Controllable functions by LG TV’s remote control:
Power on/off, volume up/down, etc.
yy Set up the sound output of TV to listen to
the sound through this unit: Refer to the TV owner’s manual for the details of
TV setting menu [ [Sound] [ [TV Sound SIMPLINK function.
output] [ [External speaker (HDMI ARC)] LG TV’s with SIMPLINK function has the logo as
shown above.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV. ,,Note
yy Depending on your LG TV model, you may yy Depending on the state of the unit, some
need to turn on the SIMPLINK function on SIMPLINK operation may differ from your
your LG TV. purpose or not work.
yy When you return to ARC function from yy Depending on a TV or a player which is
another function, you need to select the input connected with this unit, SIMPLINK operation
source to OPT/HDMI ARC. Then this unit may differ from your purpose.
changes to ARC function automatically.
24 Connecting
HDMI connection
You can enjoy the sound from the external device
which is connected to HDMI IN jack on this unit.
Optical cable 2
Connecting
To the optical output
jack of external device
2
Connecting
Connecting
The unit can not be used as a storage device.
MP3: within 80 to 320 kbps
yy FAT16/FAT32/NTFS file system is supported on WMA: within 56 to 128 kbps
this unit. OGG: within 64 to 500 kbps
yy Depending on some devices, it may not available to
recognize the followings on this unit. yy Maximum files: Up to 2,000
-- External HDD yy Maximum directories: Up to 200
-- Card readers yy A protected file by DRM (Digital rights
-- Locked devices management) cannot be played on the unit.
-- Hard type USB devices yy Video files in the USB storage device can not be
played.
-- USB hub
yy Depending on the performance of your USB
-- Using USB extension cable device, playback may not work well.
-- iPhone/iPod/iPad
-- Android device
28 Connecting
,,Note
yy Folders and files on the USB are recognized
as below.
: Folder
: File
a C
D
2
E
Connecting
b F
G
c H
I
d J
A
B
Network connection
You can enjoy various functions of this sound bar by
connecting to network and your smart device with
“LG Wi-Fi Speaker” app.
,,Note Modem
Server
In a network environment (Router, Internet
and Internet Service Provider) that supports
both IPv4 and IPv6, the network automatically 2
connects to IPv4 or IPv6 when connecting to
Connecting
the network.
You can check the each network status Router
by selecting the settings of My Speakers
([Settings]>[IP Info.]) on the “LG Wi-Fi Speaker”
app.
Requirements
yy A wireless router must be connected to the Works with the Google
internet.
yy A smart device such as a smartphone or tablet
Assistant
must be connected to the wireless router via Wi-
Fi connection. This unit works with the Google Assistant. You can
control some functions of this unit: Play and stop
,,Note music and volume control.
For more informations of “LG Wi-Fi Speaker”,
follow the instructions of the application or see Requirements
the owner’s manual of “LG Wi-Fi Speaker”.
yy Google Assistant built-in device (Sold Separately)
yy This unit must be connected to Internet.
yy This unit must be registered in [Google Home] app.
Operating 31
Operating
yy Available Devices: Smart phone, MP3, Notebook, Bluetooth device.
etc. Your speaker appears as “LG SL7Y (XX:XX)”.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device or some
of TV operated differently.
Operating
You can limit Bluetooth connection to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connection.
To turn on this function, press and hold N on
the remote control for about 3 seconds in BT
(Bluetooth) function and press it once again while
“OFF - BT LOCK” is scrolled. Then you can limit
Bluetooth connection.
To turn off this function, press and hold N on
the remote control for about 3 seconds in BT
(Bluetooth) function and press it once again while
“ON - BT LOCK” is scrolled.
,,Note
Even if you set up BT LOCK function to On, this
sound bar turns on by Auto Power function. Turn
off Auto Power function to prevent it. (Page
36)
34 Operating
To Do this
On Display Description
Press N on the remote
Playback OFF Plays songs on USB device
control.
in order.
During playback, press N on
Pause ONE Plays a same song
the remote control.
repeatedly.
During playback, press V on
FOLDER Plays songs in a folder
the remote control to go to the
repeatedly.
next file.
3 Playing less than 3 seconds, ALL Plays all the songs on USB
Skip to the next/ press C on the remote device repeatedly.
Operating
Operating
EFFECT on the remote control and press it once
again while “ON - TV REMOTE” is scrolled.
,,Note
yy Make sure that the sound output of your TV
is set to [External speaker].
yy This function does not operate on LG TV’s
magic remote control.
yy This function may not work well when some
TV control functions such as HDMI CEC,
SIMPLINK and LG Sound Sync set to ON.
yy Some remote control may not be supported.
36 Operating
Turning off
When the TV is off, this sound bar switches to the
standby mode.
Operating 37
Operating
When you try to connect your Bluetooth device to To make these connections, change to the
this unit, Bluetooth function is selected. Play your appropriate function.
music on the Bluetooth device.
Option 2.
If you press 1, the speaker switches to the network
standby mode. Then “GOOD-BYE” appears on the
display window.
Troubleshooting 39
Troubleshooting
General
Symptoms Cause & Solution
The unit does not work yy Turn off the power of this unit and the connected external device (TV, Woofer,
properly. DVD-player, Amplifier, etc.) and turn them on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
The power does not turn Is the power cord plugged into the outlet?
on. yy Connect the power plug to the outlet.
Sound is not produced. Is the volume set to minimum?
yy Adjust the volume.
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device. 4
Is the mute function activated?
Troubleshooting
yy Press [ or adjust the volume level to cancel the mute function.
Is the function selected properly?
yy Check the input source and select the correct input source.
No woofer sound Is the subwoofer plugged in?
yy Plug the power cord of subwoofer into the wall outlet securely.
Is pairing between the unit and the subwoofer disconnected?
yy Connect the unit and the subwoofer. (Page 16.)
The remote control does Is the remote control too far from the unit?
not work properly. yy Operate the remote control within about 7 m.
Is there an obstacle in the path of the remote control and the unit?
yy Remove the obstacle.
Are the batteries in the remote control exhausted?
yy Replace the batteries with new one.
The AUTO POWER yy Check connection of the external device such as TV, DVD/Blu-Ray player or
function does not work. Bluetooth device.
yy Check the state of SIMPLINK on your LG TV and turn off SIMPLINK.
yy Depending on the connected device, this function may not operate.
LG Sound Sync does not yy Check whether your LG TV supports LG Sound Sync.
work. yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
40 Troubleshooting
4 The unit does not connect yy Turn off the Bluetooth connection lock function. (Page 33.)
with Bluetooth device.
Troubleshooting
Troubleshooting 41
Network
Symptoms Cause & Solution
Cannot connect the yy The wireless communication may be interrupted from household devices that
speaker to your home are using radio frequencies. Move the speaker away from them.
network. yy Check your router. Try turning it off and back on.
yy Check that the Wi-Fi feature is turned on in your smart device.
yy Check that the speaker and your smart device are connected to same Wi-Fi.
Media servers are not yy The firewall or anti-virus software on your media server is running. Turn off
displayed on the device the firewall or anti-virus software running on your media server.
list. yy Make sure that the speaker is connected to the same network that your
media server is connected.
Wi-Fi connection does If you restart the router?
not work well. yy You need to turn the speaker’s power off and on again.
If you install new router.
yy You need to perform a factory set and setup the network connection for
speaker.
4
Application
Troubleshooting
Symptoms Cause & Solution
The application doesn’t Does an error occur when accessing the app?
work properly. yy Make sure that your smart device is compatible with the app.
yy Make sure that the application is the latest version.
yy Make sure that the connected unit turns on.
42 Troubleshooting
4
Troubleshooting
File requirement
Available File extensions: “.mp3”, “.flac”, “.aac”, “.ogg”,
“.wav”, “.wma”
Sampling frequency: within 32 to 48 kHz (mp3,
wma), up to 192 kHz/24 bit (flac)
Bit rate: up to 320 kbps (mp3)
yy The file requirements are not always compatible. For DTS patents, see http://patents.dts.com.
There may have some restrictions by file features Manufactured under license from DTS Licensing
and media server’s ability. Limited. DTS, the Symbol, DTS and the Symbol
yy Some wav files are not supported on this speaker. together, Virtual:X, and the DTS Virtual:X logo are
registered trademarks or trademarks of DTS, Inc. in
yy Depending on the types of file or ways of the United States and/or other countries. © DTS,
recording, it may not play back. Inc. All Rights Reserved.
yy Some DRM-loaded files are not supported on this
speaker.
yy The types of supported files may differ depending
on the operating system and/or the manufacturer
of the smart device and PC. The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Trademarks and licenses Electronics is under license.
Other trademarks and trade names are those of
All other trademarks are trademarks of their their respective owners.
respective owners. 5
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
Manufactured under license from Dolby
trademarks or registered trademarks of HDMI
Laboratories. Dolby, Dolby Audio, and the double-D
Licensing LLC in the United States and other
symbol are trademarks of Dolby Laboratories.
countries.
Specifications
General
Refer to the main label on the unit.
Power consumption Networked standby: 6.0 W
(If all network ports are activated.)
Model: DA-50F25
Manufacturer: Asian Power Devices Inc.
AC adapter
Input: 100 - 240 V ~ 50 - 60 Hz
Output: 25 V 0 2 A
Dimensions (W x H x D) Approx. 1060.0 mm x 57.0 mm x 85.0 mm With foot
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %
Bus Power Supply (USB) 5 V 0 500 mA
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192kHz
Sampling Frequency
Available Digital Input Audio format Dolby Audio, DTS Digital Surround, PCM
Input/Output
OPTICAL IN 3 V (p-p), Optical jack x 1
Wireless subwoofer
Power requirements Refer to the main label on the subwoofer.
Power consumption Refer to the main label on the subwoofer.
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 220 W RMS
Max. Input Power 440 W RMS
Dimensions (W x H x D) Approx. 171.0 mm x 393.0 mm x 248.5 mm
System
Wireless LAN (Internal antenna) 802.11a/b/g/n Wi-Fi networks
Wireless receiver
Power requirements Refer to the main label on the wireless receiver.
Power consumption Refer to the main label on the wireless receiver.
Rear 70 W RMS x 2 (3 Ω at 1 kHz, THD 10 %)
Dimensions (W x H x D) Approx. 60.0 mm x 220.0 mm x 175.0 mm
Appendix
Impedance 3Ω
Rated Input Power 70 W RMS
Max. Input Power 140 W RMS
Dimensions (W x H x D) Approx. 100.0 mm x 140.0 mm x 100.0 mm
Appendix
You acknowledge that all ownership rights in LG the applicable laws, some jurisdictions do not allow
Software anywhere in the world belong exclusively to the limitation or exclusion of liability for incidental
us and that no ownership rights in LG Software are or consequential damages, or have legislation that
transferred to you. You are only entitled to the limited restricts the limitation or exclusion of liability, so the
use of LG Software as is granted in these license above limitation may not apply to you.
terms. Nothing is these license terms shall limit or exclude
You may not copy, modify, decompile or reverse our liability for death or personal injury relating from
engineer our software in any way unless you are our negligence, fraud or fraudulent misrepresentation
allowed to do so by law. We reserve the right to or any other liability that cannot be excluded or
suspend, withdraw or discontinue all or part of the limited by law.
Services without notice if we consider that you are in LG Software provides access to “apps” and link to
breach of these Terms of Use. other services owned and operated by third parties,
You acknowledge that LG Software has not been such as content providers. Any third party apps,
developed to meet your individual requirements. We services and content that you access via the Services
make no promises or guarantees that LG Software are made available to you by these third party
is free from bugs or errors or that it will always be providers and are outside the scope of these Terms of
available. We use commercially reasonable efforts Use.
to provide LG Software on a continuous, high quality Your dealings with any third party providers are solely
basis but cannot guarantee that they will always be between you and the relevant provider and may be
available, uninterrupted or error free. It is possible subject to the provider’s own terms and conditions
that we may have to interrupt or discontinue the LG and privacy policy. We encourage you to read these
Software or suspend or restrict your use of all or any documents, although we are not responsible for their
part of the Services where we consider it reasonably content. We do not accept any responsibility for apps,
necessary for technical, operational, security, legal or services or content provided by third party providers.
regulatory reasons.
48 Appendix
We may impose limits on the use of or access to Modify as you think appropriate: Complaints
certain third party content, application or services, If you have any queries, concerns or complaints
in any case without notice or liability. We expressly about the Services, please contact [include reference
disclaims any responsibility or liability for any change, to non-personal LG email address].
interruption, disabling, removal of or suspension of
any content, application or service made available Modify as you think appropriate: Miscellaneous
through this LG Software. We are neither responsible Unless expressly stated otherwise, these Terms of
nor liable for customer service related to the content, Use and the documents referred to in them contain
application and services. Any question or request for the entire agreement between us and you relating
service relating to third party’s content, application to your use of the Services and supersede any
or services should be made directly to the respective previous agreements, arrangements, undertakings
content and service providers or application or proposals, written or oral, between us and you
developers, as appropriate. relating to your use of the Services.
These terms do not affect your statutory rights as a We may assign, sub-contract or otherwise transfer
consumer. any or all of our rights and obligations under these
Suitability of the Services for children and parental Terms of Use to any company, firm or person. We
control tools can only do this if it does not materially affect your
rights under these Terms of Use. You may not assign,
Modify this accordingly to suit if appropriate: The sub-contract or otherwise transfer your rights or
Services are not directed at children under the age obligations under these Terms to anyone else (except
of 13 and are not structured specifically to attract where you dispose of your LG Smart TV to a third
children under 13. Further, certain content that party) unless you first agree this with us in writing.
you may access through your use of the Services
may contain material that you consider indecent, If we decide not to exercise or enforce any right that
objectionable or which may not be suitable for we have against you at a particular time, then this
children. does not prevent us from later deciding to exercise or
enforce that right.
If you permit a child to use your LG Smart TV to
5 access the Services, you are solely responsible for If any part of these Terms of Use is found to be
deciding whether or not the relevant Services are illegal, invalid or otherwise unenforceable by a court
Appendix
appropriate for access by that child. or regulator, then, where required, that part shall be
deleted and the remaining parts of the Terms of Use
[Your Smart TV offers a parental control tool (by will continue to be enforceable.
way of a 4 digit PIN). If you have enabled the 4-digit
PIN, your LG Smart TV will not be able to display These Terms of Use do not create or infer any rights
restricted content unless you type in the PIN. You that are enforceable by any person who is not party
are responsible for setting up and maintaining the to them.
parental control tool and any other controls that are These Terms of Use are governed by the laws of the
available, and we will not be responsible for any harm, country where your LG Smart TV is sold and both you
loss or damage you suffer or any other user of your and LGE agree to submit to the exclusive jurisdiction
LG Smart TV suffers as a result of your failure to do of the courts of the country where your LG Smart TV
so. Depending on the models of your LG Smart TV, is sold in connection with the same
these features may not be available. This Agreement shall be governed by the laws of the
Viruses and Security Republic of Korea, excluding their conflicts of laws
Modify this accordingly to suit if appropriate: We use provisions.
commercially reasonable efforts to ensure that the If you have any questions or comments about these
Services are secure and virus free, but those efforts Terms of Use please contact www.lg.com.
cannot and do not guarantee that the Services will be These Terms of Use may be updated by LGE from
free from bugs, viruses, or other vulnerabilities. time to time. If we make a material change to
Further, we do not accept responsibility for any loss our Terms of Use, we will update you via your LG
or damage caused by a virus, distributed denial- Software or other means.
of-service attack, or other technologically harmful
material that may infect your LG Smart TV, data or
other material belonging to you, during your use of
the Services.
Appendix 49
Appendix
OWNER’S MANUAL
LG Wi-Fi
Speaker Connection
www.lg.com
1901_Rev01 Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2 Connection
2. Then you can see the available speaker to 4. If you have a password for your network, the
connect. security screen appears on your smart device.
Enter your password and tap [Next].
Manual connection 3. This step is only for iOS device. Go to the next
step if you use Android device.
When the simple connection is unavailable between
Turn on Wi-Fi setting on your iOS device and
your speaker and smart device, you can connect it
choose [LG_Speaker_Setup_XXXX] and then go
manually.
back to “LG Wi-Fi Speaker” app.
1. Select [Manual setup] to connect the speaker
manually.