Академический Документы
Профессиональный Документы
Культура Документы
STRUCTURAL ENGINEERING
SECOND SEMESTER
(Scheme-2013)
2. Draw an approximate moment-unit curvature diagram for the cross section of beam
450 x 800 mm, reinforced with 6 nos. 12 mm diameter. Use M25 and Fe415 grade of
steel.
a
A reinforced concrete grid floor is to be designed to cover a floor area of size l2m x
16m. The spacing of the ribs in mutually perpendicular directions being 2m clc live load
is 2 KN/m'. Ur" M25 and Fe415. Analyze the grid floor for moments and shears using
Plate Theory.
4. A roof slab is supported on columns spaced at 5 meters apart in both the directions. The
size of the square columns is 440 mm and the live load on the roof is 1500N/m'. The
load of the waterproof treatment course on the slab in 2KN/m2. Design a flat slab
without drops or column heads. Height of the column above the mat foundation is 6m.
). Design a shear wall of length 4.16 mand thickness 250 mm subjected to the following
forces
6. Design a deep beam subjected to two loads 415kN at 400 mm from supports on each
side. Use M25 and Fe415. The eff-ective span of beam is 1650 mm.
7. Design a wall 3 m high, 100 mm thick and 4 m in length between cross walls. The wall
is subjected to carry a factored load of 600 kN/m length: Use M20 and Fe415.
8. A simply supported one way ribbed slab of 5m span is to be used for 3KN/m2 live load.
Design the slab using M20 grade concrete and HYSD bars of grade Fe415.