Вы находитесь на странице: 1из 7

Page 1 of 7

303-05B Accessory Drive - 1.5L Duratec-16V Flex Fuel (82kW/112PS)/1.5L Duratec- 2012 - 2019 Fiesta 
16V Ti-VCT (81kW/110PS) – Sigma MCA
Procedure revision date: 
Removal and Installation
07/15/2011 

Accessory Drive Belt

Removal

1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).

2.

3.

Installation

NOTICE: Only rotate the crankshaft clockwise.

1. Torque: 9 Nm

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 2 of 7

2. Rotate the crankshaft till the hole is in five o'clock position.

3. NOTE: Only tighten the nut finger tight at this stage. 

Install the special tool(s) (supplied in the parts kit).

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 3 of 7

4. NOTICE: Make sure that the accessory drive belt is correctly located on each pulley.

5. NOTICE: Make sure that the accessory drive belt is correctly located on each pulley.

Click here to view a video version of this procedure.

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 4 of 7

6. Remove the Special Tool(s). Leave the stud installed.

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 5 of 7

7.

Click here to view a video version of this procedure.

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 6 of 7

8.

© Copyright 2020, Ford Motor Company.

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020
Page 7 of 7

https://www.fordtechservice.dealerconnection.com/publication/proc?linkType=Proce... 26/07/2020

Вам также может понравиться