Академический Документы
Профессиональный Документы
Культура Документы
APPLICATION
ADVANTAGES
Concrete repair:
- Improved flexibility & reduced shrinkage.
PACTOBond SBR As an additive with repair mortars for
- Lower water-cement ratio.
Spilled concrete, repairs of floors, beams and precast
- Highly resistant to water penetration.
slabs. Also can be used for bonding new concrete to old
- Excellent adhesion to Steel, Concrete, bricks,
concrete
glass, asphalt, wood, expanded polystyrene,
- Non-toxic, non hazardous and can be used with Floor screeds and toppings:
potable water. PACTOBond SBR as an additive, for underlay coat to
special finishes of chemical and effluent-resistant floors.
TECHNICAL DATA
External rendering:
Property Test Value PACTOBond SBR can be used to obtain a Water &,
method Weather resistant durable render.
Compressive (BS 6319, 40N/mm²
strength Pt1:1983 dependent on Waterproofing:
cement used and PACTOBond SBR can be used for waterproofing of
workability basements, lift pits, water towers, liquid tanks, and
Water Vapour Less than swimming pools or to any area where total
permeability: 4gm/m²/24hr, waterproofing is required.
through an 11mm
thick test Bonding Slurry Coat
Tensile (ASTM C- 2.7 N/mm2 Mix PACTOBond SBR with clean water and cement in
Strength 190-1985) the ratio of 1:2:5 by weight to get bonding slurry coat.
Mix using a slow speed drill machine fitted with a
Flexular (BS 6319, 7.9 N/mm2 paddle.
Strength Pt 3: 1983)
Page 1 of 2
A Perfect Chemistry…A Durable Concrete
CONCRETE REPAIR & PROTECTION
Surface preparation CURING
Concrete: Surfaces to which PACTOBond SBR is to Correct curing of PACTOBond SBR modified mixes is
be applied should be clean, sound and free of important. Moisture cure for 24 hours and then allow to
laitance, oil, grease, mould or curing compound. dry out slowly. (Note that initial curing is necessary to
Clean thoroughly the concrete surfaces using wire provide good conditions for the hydration of the
brush, scrubber or other equipment as appropriate. Mortars)
When repairing spilled or damaged concrete,
ensure that the concrete has been cut back to PACKAGING AND YIELD
sound material. PACTOBond SBR is supplied in 5, 20 and 200 ltrs Drums
Important Note: Whilst any information contained herein is true, accurate and represents our best knowledge and
experience, no warranty is given or implied with any recommendations made by us, as the conditions of any labor
involved in the application is beyond our control. PAC Technologies shall not be liable for any injury, loss or damage,
P.O. Box no 282 676 Dubai-UAE
direct or consequential, arising out of the use of this product. It is the responsibility of the user to ensure that the
Tel: +971 4 885 0 886
Fax: +971 4 885 0 887 product meets his particular requirements and to use it in a suitable way. Field service, where provided, does not
Visit us: www.pactechnologies.ae constitute supervisory responsibility. For additional Information contact your local PAC Technologies representative.
Page 2 of 2
A Perfect Chemistry…A Durable Concrete