Академический Документы
Профессиональный Документы
Культура Документы
OWNER’S MANUAL
310 W Sound Bar System
Please read this manual carefully before operating your set and retain it
for future reference.
FOR THE WARRANTY TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
2 Getting Started
Getting Started
contamination of the environment and bring on European Directive 2006/66/EC.
possible threat to human and animal health, the 2. This symbol may be combined with
old battery or the battery put it in the appropriate chemical symbols for mercury(Hg),
container at designated collection points. Do cadmium(Cd) or lead(Pb) if the
not dispose of batteries or battery together with battery Contains more that 0.0005%
other waste. It is recommended that you use of mercury,0.002% of cadmium or
local, free reimbursement systems batteries and 0.004% of lead.
accumulators. The battery shall not be exposed to
3. All batteries/accumulators should
excessive heat such as sunshine, fire or the like.
be disposed separately from
the municipal waste stream via
designated collection facilities
Disposal of your old appliance appointed by the government or
the local authorities.
1. When this crossed-out wheeled bin 4. The correct disposal of Your old
symbol is attached to a product it batteries/accumulators will help
means the product is covered by to prevent potential negative
the European Directive 2002/96/EC. consequences for the environment,
2. All electrical and electronic products animal and human health.
should be disposed of separately 5. For more detailed information
from the municipal waste stream about disposal of Your old batteries/
via designated collection facilities accumulators, please contact Your
appointed by the government or city office, waste disposal service or
the local authorities. the shop where You purchased the
3. The correct disposal of your product.
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
Europe Notice
POWER: This unit operates on a mains supply of
200 - 240 V ~, 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
1 always use of the same rating approved to BS
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
1362. Never use this plug with the fuse cover
Getting Started
Italy Notice
A general authorization is requested for outdoor
use in Italy.
The use of these equipments is regulated by:
1. D.L.gs 1.8.2003, n. 259, article 104 (activity 1
subject to general authorization) for outdoor
Getting Started
use and article 105 (free use) for indoor use, in
both cases for private use.
2. D.M. 28.5.03, for supply to public of RLAN access
to networks and telecom services.
L’uso degli apparati è regolamentato da:
1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività
soggette ad autorizzazione generale) se utilizzati
al di fuori del proprio fondo e 105 (libero uso) se
utilizzati entro il proprio
fondo, in entrambi i casi per uso private.
2. D.M. 28.5.03, per la fornitura al pubblico
dell’accesso R-LAN alle reti e ai servizi di
telecomunicazioni.
Brazil Notice
Este equipamento opera em caráter secundário, isto
é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando
em caráter primário.
Table of Contents
1
3 Operating 4 Troubleshooting
23 Basic operations 30 Troubleshooting
23 – USB operation
23 Other operations
23 – DRC (Dynamic Range Control)
5 Appendix 2
23 – AV Sync 31 Specifications
23 – Turn off the sound temporarily 32 Trademarks and licenses
23 – Displaying file and input source 32 Maintenance
24 – AUTO POWER On/Off 32 – Handling the unit 3
24 – Auto power down
24 – Sleep timer setting
25 – LG Sound Sync 6 Warranty
26 Using Bluetooth® technology 33 Warranty
27 – Listening to music stored on the 4
Bluetooth devices
28 Sound adjustment
28 – Setting the surround mode
28 – Auto volume On/Off
28 – Adjust the woofer level settings 5
29 Controlling a TV with the supplied remote
control
29 – Setting up the remote to control your
TV
6
energy consumption.
Portable In
Remote control (1) Batteries (2)
Listen to music from your portable device. (MP3,
Notebook, etc)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Optical cable (1) USB Cable (1)
Introduction
Symbols used in this manual
Wall bracket (1) Shaft wall mount (2)
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Wall Mount Bracket
Cover foot_19 mm (1) Installation Template
(1)
Remote control • • • • • • • • • • a • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
FUNCTION : Selects the function and the input
source.
1
W/S FOLDER : Searches for a folder of MP3/
WMA files. When a USB containing MP3/WMA files
Getting Started
in several folders is being played,
press W/S FOLDER to select the folder you want
to play.
OPTICAL : Changes input source to OPTICAL
directly.
MUTE @ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
• • • • • • • • • • b • • • • • • • • • •
AUTO POWER : This function is automatically
turned on the unit. (Refer to the page 24)
AV SYNC : Synchronizes the audio and video.
INFO : Displays the information of a file or an input
source.
REPEAT : Listens to your files repeatedly or
randomly.
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a file.
Z (Stop) : Stops playback.
d/M (Play/Pause) : Starts playback. / Pauses
playback.
SOUND EFFECT : Selects a sound effect mode.
AUTO VOLUME : Turns on and off the AUTO
VOLUME mode.
WOOFER LEVEL : Sets the sound level of woofer.
Battery Installation • • • • • • • • • • c • • • • • • • • • •
Remove the battery cover on the rear of the 0 to 9 numerical buttons : Selects a file directly.
Remote Control, and insert two (size AAA) battery DRC : Sets DRC(Dynamic range control) function.
with and matched correctly. SLEEP : Sets the system to turn off automatically at
a specified time.
• • • • • • • • • • d • • • • • • • • • •
TV Control buttons : See page 29.
Front panel
1
Getting Started
Rear panel
A DC. IN 25 V 0 2 A D OPT.(Optical) IN
B USB port E HDMI IN/OUT
C PORT.(Portable) IN
Getting Started
etc.
Place the unit in front of the TV and connect it to
the device you want. (Refer to pp. 15 - 22)
,,Note
(It has been already
26 mm installed to the unit.)
19 mm
Mounting the main 2. Match the TV’s BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
unit on a wall of TV and attach to the position.
TV
1 You can mount the main unit on a wall.
Detach the cover foot of the unit, keep the
Getting Started
Unit
Getting Started
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
,,Note
Detach the unit from the bracket as shown
below.
,,Note ,,Note
yy If you operate main unit then wireless You can enjoy the TV sound through the
subwoofer sound within a few seconds in speakers of this unit. But in the case of some
standby mode. TV models, you must select external speakers
yy Set the distance between this unit and state of the TV on the menu. (For details, refer
wireless subwoofer within 10 m (32 ft.). to your TV user manual.)
yy Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since 2
communication failure may occur if longer
Connecting
distance is used.
yy It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
Connecting to your TV
Please connect with this unit and TV using the
optical digital cable or HDMI cable considering the
state of the TV.
Optical cable
(X)
STANDARD HDMI CABLE WITH ETHERNET
(X)
HIGH SPEED HDMI CABLE
HDMI cable
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
Connecting
2. Activate ARC mode
TV : SetupDAudio or SoundDARC mode (must be
,,Note
All of the graphical user Interface (GUI) and
ON)
accessing steps (Step 02 DStep 03) to activate
the ARC / HDMI CEC would be different
depending on TV manufacture.
Refer to your TV User Manual for in-depth
information.
-- You can connect only one Sound bar to TV -The picture will not be displayed properly with
compatible with ARC. non-HDCP device.
Connecting
is not verified, TV screen is changed to
black screen. In this case, check the HDMI LG TV’s with SIMPLINK function has the logo as
connection, or disconnect the HDMI cable. shown above.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
,,Note
Depending on the state of the unit, some
generally limited to 4.5 m(15 ft). SIMPLINK operation may differ from your
yy You cannot change the video resolution purpose or not work.
in the HDMI IN mode. Change the video
resolution of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
HDMI connection
For enjoying sound only
2 You can enjoy the sound from the external device Blu-ray disc player,
you connect. DVD player, etc.
Connecting
Connecting
To the digital
optical output jack
of external device
MP3 player,
etc...
MP3/ WMA file compatibility with this unit is limited -- Using USB extension cable
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Under 999
yy File extensions : “.mp3”/“.wma”
yy A protected file by DRM(Digital rights
management) cannot be played on the unit.
yy Video files in the USB storage device can not be
played.
To Do this AV Sync
When receiving audio signals from TV, sound and
Stop Press Z.
images may not be matched. In the case, this
Playback Press d/M. function can adjust the delay time.
During playback, press d/M. 1. Press AV SYNC.
Pause 3
2. Use C/V to scroll up and down through
During playback, press C
Operating
the delay amount, which you can set at
or V to go to the next file anything between 0 and 300 ms.
Skip to the next/ or to return to the beginning
previous file of the current file.
Press C twice briefly to
Turn off the sound temporarily
step back to the previous file. Press MUTE@ to mute your unit.
You can mute your unit, for example, to answer
Press and hold C/V the telephone, “MUTE” is displayed in the display
Search for a
during playback and release it window.
section within a
at the point you want to listen
file To cancel it, press MUTE@ again on the remote
to.
control or change the volume level.
Press REPEAT on the remote
control repeatedly, the Displaying file and input
Play repeatedly display will be changed in the
or randomly following order, RPT 1 RPT source
DIR (DIRECTORY) RPT ALL You can display various information of the input
RANDOM OFF. source by pressing INFO.
Press 0 to 9 numerical buttons USB : MP3/WMA containing file information
Select a file
on the remote control to go OPTICAL/ARC/HDMI IN : Audio format, Audio
directly
to the desired file directly. channel
The unit memorizes the point
Resume at which you've changed
playback function or the unit had been
turned off.
,,Note
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
AUTO POWER function is display window will be darken by half ) -> Sleep
AUTO POWER ON
turned on. timer value -> Display on
AUTO POWER function is In display window you see “LCD OFF” and the
AUTO POWER OFF
turned off. display window turns off .
To check the remaining time, press SLEEP.
,,Note To cancel the sleep function, press SLEEP
yy This function is intentionally designed to repeatedly until “SLEEP 10” appears, and then press
turn off the unit after 1 minute of inactivity SLEEP once again while “SLEEP 10” is displayed.
in OPTICAL mode. Only if the unit has
already received the signal transmitted ,,Note
through the optical source and there is no You can check the remaining time before the
digital audio signal going to the unit, the unit turns off . Press SLEEP the remaining time
unit will turn off after 1 minute of inactivity appears in the display window.
with AUTO POWER function is turned on.
yy Depending on the connected device by the
optical cable, this function may not operate.
yy If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
yy If SIMPLINK is set to ON, "AUTO POWER OFF"
is just scrolled, even thouth you press AUTO
POWER.
yy Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
yy It is not available to turn on the unit by
AUTO POWER function if you turn off the
unit directly.
yy AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
Operating
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you 2. Set up LG Sound Sync (Optical) on the TV. Refer
use TV's remote control again, the unit to the TV's instruction manual.
synchronizes with the TV.
3. Turn on the unit.
yy When the connections failed, make sure of
the condition of the TV and power of it. 4. Select OPTICAL function.
yy Make sure of the condition of this unit and You can see "LG OPT" on the display window if
the connection in the cases below when connecting normally between this unit and your
using LG Sound Sync. TV.
-- Turned off the unit. ,,Note
-- Changing the function to the others. The amount of time to turn off this unit is
different depending on your TV when you set
-- Disconnecting the optical digital audio
AUTO POWER function to ON.
cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
Bluetooth® Profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Operating
pairing operation. When searching for this unit there are obstacles between both, your
with the Bluetooth device, a list of the devices Bluetooth device cannot be connected.
found may appear in the Bluetooth device
yy Depending on the type of the device,
display depending on the type of Bluetooth you may not be able to use the Bluetooth
device.Your unit appears as “LG SOUND BAR”. function.
3. Enter the PIN code.
yy You can enjoy wireless system using phone,
PIN code : 0000 MP3, Notebook, etc..
4. When this unit is successfully connected with yy When not connected the Bluetooth, “BT
your Bluetooth device, “PAIRED” will appear on READY” appears on the display window.
the display window. yy The Electrical malfunction due to devices
,,Note using same frequency such as Medical
equipment, Microwaves or wireless
Depending on the Bluetooth device type,
some device have a different pairing way. LAN devices, the connection will be
disconnected.
5. Listen to music. yy When someone stands and interrupts
To play a music stored on your Bluetooth device, communication between Bluetooth device
refer to your Bluetooth device’s user guide. and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth® wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
On Display Description
Auto volume On/Off
This unit supports Auto volume function that
You can enjoy comfortable
NATURAL automatically adjusts the volume level.
and natural sound.
When the output sound is too loud or too low,
3 BYPASS
You can enjoy the sound press AUTO VOLUME on the remote control. So
without equalizer effect. you can enjoy the sound with appropriate levels.
Operating
The BASS is Bass Blast. During To cancel this function, press the button again.
BASS playback, reinforce the treble,
bass and surround sound effect. Adjust the woofer level
The CLRVOICE is Clear Voice. settings
This program make voice
CLRVOICE You can adjust the sound level of woofer.
sound clear, improving the
quality of voice sound. 1. Press WOOFER LEVEL.
The GAME is Game Equalizer. 2. Press VOL +/- to adjust the sound level of the
You can enjoy more virtual woofer.
GAME
sound while playing video
games.
The NIGHT is Night Mode.
This may be useful when you
NIGHT
want to watch movies at low
volume late at night.
The UPSCALER is MP3 Up-
Scaling. When listening to
MP3 files or other compressed
UPSCALER
music, you can enhance the
sound. This mode is available
only to 2 channel sources.
Improves the bass and treble
LOUDNESS
sound.
You can enjoy more immersive
3D SOUND and cinematic surround
sound.
Operating
Samsung 6, 7
Turn the TV’s volume on or
MUTE@
off. Sony 8, 9
,,Note
yy Depending on the TV being connected, you
may not be able to control your TV using
some of the buttons.
yy The remote control of the unit performs
basic operation of your TV. Please use the
TV’s remote control to enjoy advanced
operation of your TV.
Troubleshooting
PROBLEM CAUSE & CORRECTION
yy The power cord is unpluged.
No Power Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
No sound
yy The mute function is activated.
Press MUTE@ or adjust the volume level to cancel the mute function.
The AUTO POWER yy Check the state of SIMPLINK and turn off SIMPLINK.
function does not yy Depending on the connected device by the optical cable, this function may not
work. operate.
Check the details below and adjust the unit according to them.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting
When you sense that on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
outputted sound of
the unit is low. y y With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
Specifications
General
AC adapter requirements AC 100 - 240 V, 50 / 60 Hz
Power consumption DC 25 V 0 2 A
Dimensions (W x H x D) (1038 x 35.4 x 75) mm
Net Weight (Approx.) 2.3 kg
Operating temperature 41 °F to 95 °F (5 °C to 35 °C)
Operating humidity 5 % to 90 %
Bus Power Supply DC 5 V 0 500 mA
Input/Output
OPTICAL IN 3 V (p-p), Optical jack x 1
PORT. IN 0.5 Vrms (3.5 mm stereo jack)
HDMI IN 19 Pin (Type A, HDMI™ connector) x 1
HDMI OUT 19 Pin (Type A, HDMI™ connector) x 1
Amplifier
Stereo mode 80 W + 80 W (4 Ω at 1 kHz)
5
Wireless subwoofer
Appendix
Power requirements AC 200 - 240 V, 50 / 60 Hz
Power consumption 35 W
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 150 W
Max. Input Power 300 W
Net Dimensions (W x H x D) (221 x 351.5 x 281) mm
Net Weight 7.32 kg
Warranty 33
Warranty
MODEL NO.* SERIAL NO.* DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased