Академический Документы
Профессиональный Документы
Культура Документы
3/MECH
Er. PERUMAL MANIMEKALAI COLLEGE OF ENGINEERING
Approved by AICTE & Affiliated to Anna University, Chennai
(Accredited by NAAC with ‘B++’ Grade / An ISO 9001:2015 Certified Institution)
17th k.m on Hosur-Krishnagiri Highways, Koneripalli, Hosur – 635117
2. The mechatronics is an interdisciplinary field in which the disciplines those act together are_________
a. Mechanical systems and Electronic systems
b. Mechanical systems and Information technology
c. Electronic systems and Information technology
d. Mechanical systems, Electronic systems and Information technology
3. What is used to make considerable simplification in the devices such as watches and cameras
etc. as compared to pure mechanical designs?
a. Actuators with electrical auxiliary energy
b. Amplifiers with electrical auxiliary energy
c. Both a. and b.
d. None of the above
4. In which stage the measurement system comes in contact with the measurand or the quantity
to be measured?
a. Transducer Stage
b. Signal Processor Stage
c. Output Stage
d. None of the above
6 A group of components which can complete certain tasks or achieve certain desired results in a
desired manner while working together is called as_____
a. output system
b. sequence system
c. control system
d. all of the above
7. In which system does the output not affect the process in any way?
a. Open loop system
b. Closed loop system
c. Both a. and b.
d. None of the above
9. How is the speed of operation of conventional relay system as compared to digital controllers?
a. Very slow
b. Very fast
c. Same
d. Almost similar
11. If the frequency of the input singal to a system is increased, the amplitude of the output_________
a. Start reducing
b. Start Increasing
c. Be remain constant
d. Be unpredictable
12. ______ is the time required for the response to reach 50% of the final value in the first attempt.
a. Rise time
b. Peak time
c. Settling time
d. Delay time
13. The capacity of data acquisition system (DAQ) can be specified in terms of______
14. Which module of data acquisition system (DAQ) consists of the CPU that controls the complete data
acquisition system?
a. Input module
b. Output module
c. Sampling module
d. Control module
15. What is the input of the data acquisition system (DAQ) to which a transducer is connected called?
a. control element
b. channel
c. interface
d. function
Part - B (Answer all the Questions) (5 X 2 = 20)
16. Define Mechatronics.
17. What are the elements of a measurement system and sketch its block diagram?
18. Compare closed loop and open loop control system
19. Distinguish between a sensor and transducer.
20. Define Hall Effect.
Part – C (Answer all the Questions) (1 x 10 = 10)
21. Discuss the various static and dynamic characteristics of sensors and transducers.
Part – D (Answer all the Questions) (1 x 15 = 15)
22. i) Describe neatly potentiometer sensor and the working principle of LVDT. (8)
ii) Explain sequential control in washing machine and explain the working principle of automatic
camera. (7)
Prepared By Approved By