Академический Документы
Профессиональный Документы
Культура Документы
STORE/SAVE/LOAD
Note:
If you save contents of the DX7's internal memory or newly-crested sounds in a
cartridge that is already full, the previous cartridge contents of that particular
preset number will be erased from the memory and the new voice data will replace
it. Be sure to save new voice data in preset numbers that are empty or that are no
longer needed.
Asking if you want to SAVE all data (if MEMORY PROTECT is ON at this time, the
"MEMORY PROTECTED" display appears and SAVE will not function).
(Figure)
Press "YES" key and
this display appears.
[SAVE MEMORY ARE YOU SURE?]
The internal microcomputer asks "SAVE MEMORY, ARE YOU SURE?" to prevent accidental
erasure of important voice data in the RAM cartridge. Check to see that the RAM
cartridge inserted in the instrument does not contain important voice data, then
press [YES] once more. The "UNDER WRITING" display appears and the save operation
begins (if the PROTECT switch on the RAM cartridge is ON at this tame, a "WRITE
ERROR" message will be displayed and the save operation will be terminated).
When the SAVE operation is finished, the "COMPLETED" massage will appear. MEMORY
PROTECT should now be turned ON.
(Figure)
Press "YES" key and
this display appears indicating that SAVE is in progress.
SAVE MEMORY UNDER WRITING !
Note:
If a "FOARMAT CONFLICT", "ID CONFLICT", or "READ PROTECT" message is displayed
during a STORE or SAVE operation using a RAM cartridge, it means the cartridge must
be formatted. For details, please refer to the Cartridge Formatting section on page
7.
Asking if you want to LOAD all data (if MEMORY PRO ECT is ON at this time, the
"MEMORY PROTECTED" display appears and LOAD will not function).
(Figure)
Press "YES" key and
this display appears.
[LORD MEMORY YOU SURE?]
The microcomputer asks "LOAD MEMORY, ARE YOU SURE?" to prevent accidental erasure
of important voice data in the instrument's internal memory. If it's OK to LOAD,
press [YES] a second time and wait for the "COMPLETED" display. MEMORY PROTECT
should then be turned ON.
(Figure)
Press "YES" key and
this display appears indicating that LOAD has finished.
LORD MEMORY COMPLETED