Академический Документы
Профессиональный Документы
Культура Документы
SMC GRP MANHOLE COVERS, FTTx PRODUCTS & TELECOM OSP ACCESSORIES
Website: broadbandtech.co.in
Telecom & Infrastructure Solution provider
About Broadband Technologies Pvt. Ltd.
Broadband Technologies Pvt. Ltd. (abbrv. BTPL) was incorporated in 2001 with the vision to provide Marketing and Business
Development growth to their suppliers and total consultancy and turnkey solutions to their end customers.
Since inception we have evolved as a company and have been involved in detailed discussions with our customers/contractors
in Middle-East & together conceptualizing new products to meet new technology demands and generate bigger business
opportunities.
SMC is a high strength glass fibre reinforced thermoset moulding material which is normally compression moulded using
heated mould tools under high pressure on a large press.
SMC combines glass fibre and unsaturated polyester/ phenolic/Vinyl and Acrylic modified resins, fillers (Calcium carbonate),
catalysts, pigments and stabilizers and release agents to produce a high strength moulding compound
The manufacture of SMC is a continuous in-line process. The material is sheathed both top and bottom with a polyethylene or
nylon plastic film to prevent auto-adhesion. The liquid material is spread uniformly onto the bottom film. Chopped glass fibres
are deposited onto the mixture, the top film is introduced and the sandwich is rolled into a pre-determined thickness. The
formed SMC material is allowed to cure for 48 hours.
Once cured the material can be used for manufacture where it is placed as cut layers into the pre-heated moulds and
compressed at a set tonnage and time suitable for the size and load rating of the cover.
1. Free from fear of theft as the material is non-reusable and has no resale value
2. Easy to handle due to light weight, hence no risk of injury. SMC covers are 30% lighter than GRP Covers and 50%
lighter than DI Covers
3. Does not rust due to chemical / sewage / rain water
4. High service life with a minimum life span of 50 years
5. High on aesthetics due to varied colours available
6. No additional cost needs to be incurred to make it corrosion resistant
7. The pigments are inbuilt in the material and UV stabilised. Hence there is no peeling / fading of the colours due to
sunlight
8. SMC covers are flexible and regain their form after release of load
9. Locking arrangement is available depending on customer requirement
10. Good resistance to extreme temperature (-100 °C to +80 °C)
11. Each cover is CONSISTENT as it is made from moulds. No manual intervention is required. Piece to piece variation in
shape, size, colour & weight is NOT visible.
12. The complete cover is single piece hence top cover related issues are not seen
13. Metallic parts like LOCKS and HINGES are included into the mould before the pressing process takes place
14. CAN COMPLY with all testing parameters as per BSEN124 standard for composite covers
Model # BT-S600L
Variants –
1. Payload – A15 Weight – 18 Kgs
2. Payload – B125 Weight – 24.5 Kgs
3. Payload – C250 Weight – 30 Kgs
4. Payload – D400 Weight – 43 Kgs
Model # BT-S600HL
Variants –
1. Payload – A15 Weight – 28 Kgs
2. Payload – B125 Weight – 34.5 Kgs
3. Payload – C250 Weight – 36.5 Kgs
4. Payload – D400 Weight – 42.5 Kgs
Model # BT-EA-S600L
Weight – 9 Kgs
Model # BT-S450L
Variants –
1. Payload – A15 Weight – 9.5 Kgs
2. Payload – B125 Weight – 10.5 Kgs
3. Payload – C250 Weight – 14 Kgs
Variants –
1. Payload – A15 Weight – 27.5 Kgs
2. Payload – B125 Weight – 31 Kgs
3. Payload – C250 Weight – 33 Kgs
4. Payload – D400 Weight – 43.5 Kgs
Model # BT-S-SQ432L
Variants –
1. Payload – A15 Weight – 9.5 Kgs
2. Payload – B125 Weight – 13.5 Kgs
Model # BT-S-SQ635L
Variants –
1. Payload – A15 Weight – 21 Kgs
2. Payload – C250 Weight – 33 Kgs
Model # BT-S580L
Variants –
1. Payload – A15 Weight – 10 Kgs
Variants –
1. Payload – B125 Weight – 6.5 Kgs
Model # BT-S-KG870L-C
Product Description – SMC GRP Kerb grating for side walk, with Lock & C250 payload
Variants –
1. Payload – C250 Weight – 49 Kgs
Model # BT-S-KG995L-C
Product Description – SMC GRP Kerb grating for side walk, with Lock & C250 payload
Variants –
1. Payload – C250 Weight – 31.5 Kgs
Note: The weights mentioned above are approximate / typical / nominal with ± 5 kg variation
TECHNICAL SPECIFICATIONS
Product Description: Ø600 mm SMC Composite GRP Cover in GRP Frame with Security Lock, D400 payload
Application: Install on Manhole /Access Chambers & suitable for 40T load Carriageway applications as per EN124:1994 Std
Photo left:
&
TECHNICAL SPECIFICATIONS
Product Description: Elevation Adaptor C/O- Ø600 mm SMC Composite GRP Frame, D400 payload
Install on Frame of Existing Manhole /Access Chamber Cover Type # BT-S600L-D ( cover Ø 695 mm) for raising
Application:
the Cover height by 70 mm & suitable for 40T load Carriageway applications as per EN124:1994 Standard
TECHNICAL SPECIFICATIONS
Product Description : Ø600 mm SMC Composite GRP Cover in GRP Frame , with 180° Hinge Opening & security Lock , D400 payload
Application: Install on Manhole /Access Chambers & suitable for 40T load Carriageway applications as per EN124:1994 Standard
Product Photos:
2
1
TECHNICAL SPECIFICATIONS
Product Description : 635 mm x 635 mm SMC Composite GRP Cover in GI Frame ,C250 payload
Application:
Install on Manhole /Access Chambers & suitable for 25T Medium Duty load for Oil/Gas Stations ( for Gas Valve) etc.
Supplier name : Broadband Technologies Pvt.Ltd.,Pune-411004 ( M.S) , India ; ISO9001 Quality Approved
Drawing Reference Enclosed Drawing # 1 for Cover & Drawing # 2 for Frame
Cover Specs & photo Clear Opening 635 x 635 mm
Colour Colour options available
Material SMC, Fiberglass Reinforced Unsaturated Polyesters
Type of Construction: One Piece , Hot Moulded
Nos of Covers per set 1 No.
Cover Size 740 x 740 mm
Insertion Depth 63 mm
Material of Frame GI ( Galvanized Iron )
Frame Specs Height of Frame 100 mm
Out to Out Frame Size 745 x 745 mm
Weight Cover & Frame 33 kgs
Test Standard EN124:1994
Test Standard
Class C250 Payload
Special Features Lifting Keyhole Closed type. Prevents entry of Sand , Dust & water from top
of GRP cover Cover & Frame material UV Stabilised
(Refer photo below for details) Outdoor Use Yes
Logo English /Arabic Text as per Customer specifications
Warranty 30 years from the date of delivery
Product Photos:
Description:
Cable Bearer bracket is used to organize Telecom Cables in Fibre Optic Manholes, Cable trench and also as Bracket for holding
the Fibre Optic Splice Closure in the FO Manholes.
There are two models of cable bearer brackets with Effective Lengths of 248 mm & 350 mm.
Material: Fiberglass SMC
Loading Capacity: 200 Kgs
The Advantages of Fiberglass cable
Installation procedure & hardware required: bearer bracket:
2 pcs concrete anchoring SS304 – M10x100 mm set screw are used to install ✓ High strength,
each Cable Bearer bracket. ✓ light weight,
✓ easy transportation,
Photos shows its use in trenches ✓ simple construction
✓ Smooth surface, small friction
coefficient, does not damage the
cable,
✓ Good water resistance, long-term
use in wet or water, can be of use
in wide range of environments
✓ the high insulation, electroless
corrosion, to prevent eddy current
✓ Heat-resistant, cold-resistant,
flame retardant excellent
performance
Order Guide & Technical details for the 2 types are given below:
BT-CBB250 BT-CBB350
GRP Connection Box / Pull Box, with GRP Cover BT-CB Series
ETISALAT (UAE) approved: JB23 GRP Joint Box for CATV / FTTH network
Applications: Last mile FTTH, Battery Box for Solar Powered Street lights, Traffic light junction Box etc.
Product Description – SMC Drain Channel with Grating Cover, lockable type
Variants –
1. Payload – B125 / C250 Weight – 22 Kgs
Model # BT-S-CC-250x1000
Weight – 8 Kgs
Pole / Column Bottom Cover – Tactile Walking Guide Surface Tactile Walking Stimulating
Inner / Outer Dia = 195 / 230 – 400 mm x 370mm Surface – 400 mm x 400mm 150 Deg Rotation Part
mm , 640mm (H) – 6.5 Kgs
Type 4 - 915 x 455 DI Cover with Frame with Hinge and Lock – D400 Type 6 - 1310 x 610 DI Cover with Frame with Hinge and Lock – D400
Note: Enclosed is list & photo catalogue of FO Products & Accessories, “approved & supplied” for
OMANTEL’s & OMAN BROADBAND COMPANY’s FTTx network.
Duct Items
• D400 lid (s) for Precast type 4 chamber – 915mm x 445mm x 600mm
• D400 lid (s) for Precast type 6 chamber – 1310mm x 610mm x 1000mm
• D400 lid for Precast type chamber, Clear Opening Dia. 600mm
Splice Closures
• Customer Premise Termination Unit 4 Port SC/APC including adapters and all mounting accessories
including pig tails
19”, 2U, 144 ports SC/APC R/M Termination Panel, Type # BT-ODF-DR-2U144-SC,
252 mm depth, showing front/side/inner views of the product
Patch Chord, SC/APC, SM, G.657A2, Pigtail, SC/APC, SM, G.657A2, Pigtail, SC/APC, SM, G.657A2,
2mm LSZH jacket, 20M length 2mm LSZH jacket, 1.5M length Dia. 0.9mm, 1.5M length
Monopole Towers are designed according to the heights 10m, 15m, 20m,
25m, 30m & 35m unless otherwise requested by the Telecom Operator.
Cylindrical steel pole with / without
These are avaiable in Camouflaged variant as well. All monopoles are
antenna shrouding’s ,mounts & AWL
complete with the accessories for antenna installation, cables fixing,
System
access ladder up to the top of the structure along with a safety rail & safety
hanger, grounding, lightning conductor system & aircraft warning light
system or shall be in accordance with the Telecom Operator Specs.
E) sabhnanin@gmail.com M) +91-9822019227 Website: broadbandtech.co.in 25
Telecom & Infrastructure Solution provider
Jumper Wire, Drop Wire & Indoor PVC Telephone Cables
GRP Products, A15 to D400 payload: Ductile Iron Manhole Covers, A15 to D400 payload:
1. GRP Manhole Covers Type 4 & Type 6, CW1 , CW2 , CW3
2. GRP Joint Box / Connection Box / Battery Box
3. GRP Handholes
4. GRP Drain Channels, Kerb inlets & Gratings
Duct Accessories for 100 mm ID Main Duct:
1. 2/4/8-way Spacer,
FTTx Product Range: 2. End Plug
1. Fibre Optic Splice Closures, Line & Dome types, Splice & 3. 3/4/5-way, Split Type Multi-Duct Plug
SC/APC Type: IP68, Mechanically sealed Cable ports, 12F to 4. Draw Rope, PP, 3 Strand , 4mm , 6mm (500m/Reel),
576F White/Yellow/Grey
2. ODF Cabinets, 19” Open, Closed Racks & Modular type
3. 19” Rack-mountable Splice Distribution Module, 12F to 288F,
HD Swing –out & drawer type
4. 19” -1U PLC splitter Rack Copper Telephone Cables:
5. FDH Street Cabinet, Outdoor & Indoor Types: 1. Jumper Wire
Max. Capacity: 144/288/384/576F & 16 x 2:32 splitters 2. Indoor PVC Telephone Cable
6. PLC Splitters: Bare, Blockless, ABS Box Module & LGX 3. Jelly Filled Underground Telephone Cable
4. Aerial Telephone Cables
Cassette Types, 1:N & 2:N , N=64
7. Wall / Pole Mountable Splice-Distribution Box, Splitter 5. Drop Wire Cable
Installable, 12F to 144F
8. Wall mountable Drop-Fibre Termination Box, Hinged Type Copper Cable Jointing kit:
with Lock, Splitter Installable, 2/4/12/24/36/48F 1. BSW, 5 Pair
2. MJC 3/5 ,50Px0.5 Mechanical Joint Closure
9. Patch Chord, Pigtail, Adaptor, Attenuator, Heat Shrink Splice
Accessories 3. MJC 4/6 ,200Px0.5 Mechanical Joint Closure
4. RTSF Heat Shrink Types
10. FO Cables: Indoor & Outdoor Types
Registered Office:
BROADBAND TECHNOLOGIES PVT. LTD.
4, Centre Court, Prabhat Road, Lane 2, Deccan Gymkhana, PUNE- ISO 9001:2015 Quality
411004 (M.S), INDIA Telefax) +91-20-25677055; M) +919822019227 Management System Certified
Email: sabhnanin@gmail.com ; Website: broadbandtech.co.in V.211118