Академический Документы
Профессиональный Документы
Культура Документы
AKIRA 14/21S01
user remote 1) Press and release key "RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times
AKIRA 3Y11
Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "MENU"
user remote 2) Press and release key "MENU"
user remote 2) Press and release key "Q. VIEW"
user remote 2) Press and release key "MUTE"
AKIRA 5N11
Factory remote 1) Press and release FACTORY key
Convert the user remote con to the Factory remote
user remote 1) Connect IC pin14 & pin17 through a jiggle switch
MI Item Range Default value MI Item Range Default
{50HZ/60HZ M6} {OSO 0/1 0 M1} {V.SLOPE 0~63 31} {AGC SPEED 0~2 1}
{V.SHIFT 0~63 33} {FFI 0/1 0} {V.SIZE 0~63 37} {FSL 0/1 0} {V.SC 0~63 24}
{FMWS 0/1 0} {H.SHIFT 0~63 29} {40 HP2 0/1 0} {OSD.V.POS 0~63 20} {9 RPO
0~3 1} {OSD.H.POS 0~63 8} {6 PROGRAM NO. M7} {COOL BO OFFSEF 0~32
16}{WARM BO OFFSET 0~32 16} {M2 AGC 0~63 22} {STANDARD BRI 0~63 48}
{WIDE 0~63 0} {STANDARD CON 0~63 48} {MAX ZOOM 0~63 50} {STANDARD
COL 0~63 32} {SEARCH SPEED 0~3 1} {SHARP BRI 0~63 48} {SHIPPING 0}
{SHARP CON 0~63 63} {SHARP COL 0~63 32} {M3 BT 0~63 48} {SOFT BRI 0~63
32} {CT 0~63 48} {SOFT CON 0~63 32} {RB 0~63 31} {SOFT COL 0~63 32} {GB
0~63 31} {M8 AV MODE 0~6 3} {RD 0~63 40}{FM GAIN 0~63 63}{GD 0~63 40}{Y
DELAY PAL 0~15 9}{BD 0~63 40}{Y DELAY NTSC 0~15 9}{SB 0~63 30}{Y
DELAY AV 0~15 9}{SC BRIGHTNESS 0~63 55}{M4 SUB CONTRAST 0~63 63}
{CATHODE LEVEL 0~15 1}{SUB COLOR 0~63 63}{BAND MODE 0/1 1}{SUB
SHARPNESS 0~63 31}{START ON 0/1 1}{SUB TINT 0~63 31}{RF AMP 0/1 0}
{HEADPHONE 0/1 0}{M5 IF 38.9M}{SRS 0 6.5M 0/1 0}{M9 LOGO OPTION 0/1
{56.0M 0/1 1}{*LOGO ---------- AKIRA}{5.5M 0/1 1}{ROW POSITION 0~12 6}
{4.5M 0/1 0}{COLUMN POSITION 0~12 2}{SIF PRIORITY 5.5M COLOR 0~6 0}
{AV NOLY 0/1}{0 START TIME 6~12 10}
2
AKIRA 5P60
user remote 1) Press and release key "CLOCK"user remote 2) Press and releasekey
"P.M."user remote 3) Press and release key user remote 4) To exit, press and
release key "MENU
AKIRA 8821
Steps to enter into the Factory Mode
TV front panel 1) Press and hold key "v-"
user remote 2) After volume=0, press key "DISPLAY"
user remote 3) To exit, press and release key "DISPLAY
AKIRA TB1238
Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "1"
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "3"
user remote 5) Press and release key "8"
user remote 6) If CH position is not at 38, retry from step1
user remote 7) Press and release the mute key
user remote 8) Input the password "1","2","3","8"
to unlock password the general secret code is 2175 Success - "M" displayed
AKIRA TB1251
Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "1"
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
user remote 6) If CH position is not at 51, retry from step1
user remote 7) Press the MENU key to the MENU menu, selectthe LIMIT item and
press the volume up key to enter into the LIMIT menu
user remote 8) Press and release the mute key
user remote 9) Input the password "1","2","5","1"
ALIMPO
Press RECALL AND VOL-in remote control simultaneously. To move the sub
menus Factory, Balance B / W Adjust and press RECALL again in the remote and
VOL - in the TV simultaneously. Item to select channel up or down to adjust value
Allstar 3750
CTV Hotel Menu
OFF:Select program 38. Simultaneous press
(3 sec) STORE & CONTROL+ on local keyboard.ON:Select program 38.
Simultaneous press (3 sec) STORE & PROGRAM- on local keyboard.
ANSONIC
From the controlremote, press MENU to enter INSTALL (FEATURE), introduce
the sequence 4, 7, 2, 5. To select the item you press CHANNEL + / - to adjust the
value press VOL + / -. To save changes press the red button. To
TV exit press.
Apex AT2002
Decrease volume to 0, press the keys MUTE on the R/C and VIDEO on the TV
simultaneously. To make adjustments keys: MENU SELECT. To exit: stand by
button in R/C.
Audinac ST-2157
Turn off TV, using the remote control RD3401A press the following sequence
DISPLAY MENU, 3, 8, POWER, turn on the television in the service mode. Enter
the option"Adjustment". To exit and save changes to shut down your television.
Warning!!! DO NOT alter the values shown in "OPTION".
AudioTon
CTV 5502 10.3 90° MONO CTV Service MENU Press UP & DOWN buttons
simultaneously on tv's local control and then switch on.
Aurora MRT-CT20D
Turn on TV,ignition pressure in the Remote control MENU, QWIEW, MUTE. With
press PROG + / -select the item, with volume + / - changes the value by pressing the
clock is changed the sub Menus
Aurora MRT-CT20D
Turn on TV,ignition pressure in the Remote control MENU, QWIEW, MUTE. With
press PROG + / - select the item, with volume + / - changes the value by pressing the
clock is changed the sub Menus.
China TV LC
Enter the factory Menu
At the state of "PRESET"."Ch Exchange",press 2483 to enter factory menu then
pressmute, you can translate the pages.At the last page of factory menu, hold\keep
all the ready state & exit by pressing Menu.Changethe enactment CH+/CH- choose
the item which you want to change.Vol+/Vol- change the item you have choosed.
LOGO Setting Key.
0/1:Logo vertical position adjust
2/3:Logo Horizontal position adjust
4:Logo color adjust
5:Logo font zise
6:Switch line for adjust
7:reset logo position
Menu:save & exit
CH+/CH- : select the caracter to be adjust
Vol+/Vol- : Adjust the selected character
Daewoo DTP28G8
Turn on TV, tune in channel 91, enter the MENU, then PICTURE, download all
resolution (Sharpnes), exit the menu, press the keys: red, green and
menu on the remote control
Pressing: MENU,
6, 4, 8, 3. Displays the text "TEST". Click: VCHIP.
Now you can select the number (1,2,3,4, 7,8,9) to enter the
different settings menus. To exit: POWER
General Electric
Turn on TV. Press the MENU button and keep it pressed while pressing POWER
and then VOL +. P00 is displayed and V00. Press VOL + to indicate
V76, then press CH + / - selecting items and VOL + / - the standard of the same. To
exit and save changes, press POWER. Please note: The item is the frequency P01
horiz. If too low to activate the protection, and the TV was locked.
Goldstar
With the TV on, press MENU on the TV while pressing MENU on the remote
control. With CANAL + / - select the item and VOL + / - changes the data. To save
the changes, since the remote control press OK (ENTER) and exit POWER
ICHIKO
Press simultaneously volume down on Television control panel & display key on
remote control.
Select parameter press channel up or down.
Change value data press volume up or down.
IRT
Turn On, ignition pressure in the C / R: MENU, QWIEW, MUTE. With PROG + / -
selected items, with VOL + / - changes the value of the clock with the key changes
sub. Menus
Full 1 0 0 0
2 -10 -7 -8
3000
4000
5 -6 -5 -5
6110
7 0 -1 0
16:09 1 0 -1 -1
2 34 34 34
3000
4 -1 -1 -1
5 -5 -3 -3
6 -2 -1 -4
7 -2 -6 -2
Regular 1 0 0 -1
2 -7 -7 -7
3000
4 -2 -2 -1
5 -16 -17 -17
6 0 0 -1
7100
14:09 1 0 0 0
2 13 16 13
3000
4 -3 -1 -3
5 -6 -7 -6
6010
7 0 -2 0
Service Menu KCL
Decrese volume to 0, press recall button on remote control, hold down volume - on
tv panel simultaneously, press again recall button on remote control, use this step to
enter next menu.
LG
The quote from the manual is: Adjustment method:1) Enter the adjust mode by
pressing the IN-START button which seems to suggest its going to need the remote
"in-start" button only exists on service remote mate, part number 105-201M
LG MC64
CTV Service Mode
Simultaneous press OK on RC & local panel.
Loewe C9003
CTV Service Mode
On the local control press function key five times
(indication "Service" will appear), afterwards
within a sec. press key "MEN" on the remote
Microsonic
TV off stand by, possition use the remote control RD3401A press the following
sequence DISPLAY, MENU, 3, 8, POWER, turn on the computer in the service
mode. Enter theoption "Adjustment". To exit and save changes to shut down your
computer.
Recommendation: DO NOT alter the values shown in "OPTION".
Misawa
With the TV off using the remote control RD3401A press the following sequence:
DISPLAY
MENU, 3, 8, POWER, turn on the computer in the service mode. Enter the option
"Adjustment". To exit and save changes to shut down your computer.
Recommendation: DO NOT alter the values shown in "OPTION".
Service Menu Mitsubishi
Turn on TV, Press Menu then input the number 2, 3, 5, 7.
Carefully, do not RESET the factory data, it will disappered all data factory.
Select category Press Audio.
Press channel up or down to select parameter data.
Press volume up or down to change value.
To save the data press enter
After the ajustment completted, press menu 2 times.
Mitsui
Introduce
in the C / R the following sequence: MENU, Q VIEW, MUTE. With number keys
select different sub-menus. With PROG + / - select the item, with VOL + / --
modifying the value. To change the menu keys. To exit:
MENU
Mustang CM2893
press sequence in the remote control No. Canal, Pause, Ap.Prog,
Norm image appear Factory 1/2/3 menus. With channel up or down amending
Factory menu. Withvolume up & downis change to each sub menu.
Another sequence DISPLAY MUTE, SLEEP, FUZZY
Mustang CM2901R
press sequence in the remote control No. Canal, Pause, Ap.Prog,
Norm image appear Factory 1/2/3 menus. With channel up or down amending
Factory menu. Withvolume up & downis change to each sub menu.
Another sequence DISPLAY MUTE, SLEEP, FUZZY
New Point
With the key hidden in the remote control, located next to the button and beneath
system mute, enter and moves through the various sub-menus and exits.
To change item press channel up or down to adjust change value data press volume
up or down.
Orion
In TV ignition OSD, press the remote control, via the hidden key
a small hole in it (If you do not have the hole, and disarm
find a key that is not accessible externally). The sub menus and items are
selected with the corresponding number. The values are adjusted with VOL + / --
to exit and save, press 0 (in some chassis may be
Panasonic CT-215785
Factory codes for panasonic tv
Turn on TV, short-circuit points FA1 - FA2. Press ACTION (or MENU) and
VOL + simultaneously. Press POWER on the remote control to select
PANASONIC PE77U
Write down all values data before make any change.
Once a value is changed, THE CHANGE IS MADE.
Press Volume down button, Hold down the button ON THE PLASMA TV.
Press three times the RECALL button on remote control.
The Service Menu mode will comes up.
To navigate main menu Use {1} {2} on remote control.
To navigate sub-menu Use {3} {4} on remote control items.
To change item value Use {VOL+} {VOL -} on remote control.
To save Turn off Power to exit service mode.
Panasonic TX-33AK10.
Bass to max.Treble to min.Hold down "index"Press "-" (minus) on the front of the
set.
POLYTRON
TV set in stand by mode
Press the menu buton on remote control,hold till tv on.
Input 1013 or 1014.
Change move up & down to select value
VOL +/-. To change value.
Store press menu.
Precision AK-19
From the remote control, press SET MENU to enter (FEATURE), introduce the
sequence
4, 7, 2, 5. To select the item you press CHANNEL + / - to adjust the value press VOL
+ / -. To save changes press the red button. To TV exit press.
TCL
CHASIS USE M5262 IC, PRESS MENU THEN INPUT 6,4,8,3
TCL
Colour Television Receiver Model:T2111A
· Simultaneously press “DISPLAY” button on remote handset and Volume- button
on
Thomson TX-90
CTV Service Mode Switch off TV with RC (st-by). Switch off TV with main switch.
Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and
switch on TV with main switch. Press VT button again.
Toshiba 13A21C
Enter DATA SET mode by setting VOLUME to minimum.
Press both VOL. DOWN button on the set and Channel button (6) on the remote
control for more than 1 second.
ADDRESS and DATA should appear
ADDRESS is now selected and should "blink". Using the SET + or - keys on the
remote,step through the ADDRESS until required ADDRESS to be changed is
reached.
Press ENTER to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using SET + or - until required DATA value has
been selected.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
Repeat steps 3 to 6 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to
STANDBY MODE) to finish DATA input.
Toshiba 2876dd
CTV Service Menu
Press 'MUTE' button. Press and hold 'MUTE'
button and press 'MENU' on local keyboard.
Select: PR+/-. Adjust: VOL+/-. Store: auto.
Exit: 'STANDBY'. Test picture: 'AV'.
ZENITH
This might work on Goldstar TVs as well, since both Zenith and
Goldstar are the same company, LG Electronics.
Hold the MENU button. The menu will come up and then after a few
seconds will go away. Now let go of the MENU button and enter
9 8 7 6 Enter You will get a service menu that varies widely depending on model, so
I won't include a walkthrough here. The ones I tried were fairly
self-explanatory.