Академический Документы
Профессиональный Документы
Культура Документы
Ltd
Desiccant Breather
Spannkraft
HUILER
HUILER
systems with perfections
Description
GEL AIR BREATHER Water vapor absorbent - The silica
used in the Desiccant Breathers absorbs vapor to 40% of its
own weight.
DESICCANT BREATHER
Technical Description
Technical Specification
10
5” 5” 1.4KG
SB1601 (CFM)
5” 20
SB1602 8” 2.1KG
(CFM)
3.5KG 20
SB1603 10” 5”
(CFM)
Adsorbent Phase Change
DESICCANT BREATHER
During the breathing process, the incoming air may consist of moisture and dirt which
should be removed in order to prevent any damage. Hence the air is made to pass through the
silica gel breather, which will absorb the moisture in the air and ensures that only dry air enters in
to the transformer. Silica gel in the breather will be orange when installed and they turn to green
colour when they absorb moisture which indicates the crystals should be replaced. These
breathers also have an oil cup fitted with, so that the dust particles get settled in the cup. Thus
Silica gel breathers provide an economic and efficient means of controlling the level of moisture
entering the conservator tank during the breathing process.
Ordering Information
S B 16 01 P
3/4” BSP = P
1” BSP = Q
1 1/2” BSP=R
Series Type
Basic Type
Nominal Air Flow Rate 20 CFM (150 gpm of fluid volume change)
5 CFM (37 gpm of fluid volume change)