Вы находитесь на странице: 1из 1

Diagnostic Manual MAN-00129

MAXXIMO (BS III & BS IV) MAY 2011/Rev 2

Step 7

Ignition OFF
Accelerator pedal sensor
connector DISCONNECTED
ECU Connector
DISCONNECTED
Check the continuity between
pin E of the accelerator pedal
sensor connector and pin 83 of
ECU connector

Ignition OFF
Examine the open circuit
of ground line
Does continuity Repair/replace the wiring
YES NO harness
exist?
Clear the error codes and
verify

Step 8

Ignition OFF
Accelerator pedal sensor connector
DISCONNECTED
ECU Connector DISCONNECTED
Check the continuity between pin F of
the accelerator pedal sensor connector
and pin 61 of ECU connector

Does continuity
YES exist? NO

Ignition OFF
Examine the open circuit
Go to step 9
in signal line
Repair/replace the wiring
harness
Clear the error codes and
verify

The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are 29
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.

Вам также может понравиться