Академический Документы
Профессиональный Документы
Культура Документы
LPD-4019 __
Mechanical specifications When ordering replace “___” with connector type.
No N
Fore/Aft 0.75 m2 8.1 ft2 -150 -30
l
Side 0.95 m2 10.2 ft2
-160
H-P -20
-170 -10
5) Rated Wind Velocity (Safety factor 2.0) 180 35 30 25 20 15 10 5 0
160 20
Wind Load @ 100 mph (161 km/hr)
150 30
Fore/Aft 1206 N 271 lbs 140 40
Side 1450 N 326 lbs 130 50
120 60
110 70
100 80
Antenna consisting of brass and covered by a 90
-170 -10
35 30 25 20 15 10 5
Electrical specifications
180 0
150 30
Transmission Line
Impedance 50Ω 140 40 Technology)
3)
Connector(s) NE or E-DIN 130 50 Antenna Design:
120 60
1 port / center 110
100 80
70
90
z True log-periodic design allows for superior
1)
VSWR ≤ 1.25:1 Vertical front-to-side characteristics to minimize
sector overlap.
Polarization Vertical
1) z Durable brass feedline design eliminates
Gain 19 dBd
the need for conventional solder joints in
2)
Power Rating 500 W the signal path.
1)
Half Power Angle z A non-collinear system with access to
Radiation patterns for all antennas are every radiating element for broad band-
H-Plane 40° measured with the antenna mounted on width and superior performance.
E-Plane 7° a fiberglass pole.
1) z Air as insulation for virtually no internal
Electrical Downtilt 1.25° Mounting on a metal pole will typically signal loss.
1) improve the Front-to-Back ratio.
Null Fill 5%
This Amphenol Antel antenna is under a five-
Lightning Protection Direct Ground year limited warranty for repair or replacement.
1) Typical values.
2) Power rating limited by connector only.
3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.
806-960 MHz
4) The antenna weight listed above does not include
the bracket weight.
Improvements to mechanical and/or electrical performance
of the antenna may be made without notice.
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001 Revision Date: 7/5/07
Toll-Free (888) 417-9562 Fax. (815) 399-0156 antel@antelinc.com www.antelinc.com