Академический Документы
Профессиональный Документы
Культура Документы
DO NOT USE THIS METHOD FOR DETAIL DESIGN – ALWAYS CONSULT A REPUTABLE SUPPLIER FOR DETAIL DESIG
To modify Calculated
Sources
Perry page 6-18
Mecanique et Rheologies des fluides en genie chimique, Midoux, page 329-330
Page 1
Compressible flow
Applied Process Design Volume 1 - Ludwig - Gulf Professional page 69
Copyright www.PowderProcess.net
The content of PowderProcess.net is copyrighted but no warranty nor liability is ensured. The content of this site is to be seen as a help and important information and calculation
another source. The user must always respect all applicable regulation. The use of the information is at the user a
Page 2
Compressible flow
EPUTABLE SUPPLIER FOR DETAIL DESIGN
Gas
he inlet pressure of the section
Dry air
Nitrogen
Oxygen
Helium
Hydrogen
To calculate the pressure drop at a given gas rate, cut the pipeline in Methane
different section and describe them thanks to the table below. Then
enter the flowrate expected in cell C17, read the pressure drop in cell Propane
C18. Sections pressure drops are in section CI.
If the pressure drop is given and you wish to calculate the flow, enter Butane
the given pressure drop in cell C21 and modify C17 until cell C22 is Ammonia
equal to 0
In any case always make sure there is no choked flow Chlorine
Sulfur dioxide
Carbon monoxide
Valid calculation ? ok Carbon dioxide
Page 3
Compressible flow
act powder.process@protonmail.com
site is to be seen as a help and important information and calculation must always be double checked by the user through the quality procedure of his organization or by checking
ct all applicable regulation. The use of the information is at the user and its organization own risk and own cost.
Page 4
Compressible flow
Min. Pu/Pd
γ=cp/cv for choked flow
1.400 at 20 °C 1.893
1.404 at 15 °C 1.895
1.400 at 20 °C 1.893
1.660 at 20 °C 2.049
1.410 at 20 °C 1.899
1.307 1.837
1.131 1.729
1.096 1.708
1.310 at 15 °C 1.838
1.355 1.866
1.290 at 15 °C 1.826
1.404 1.895
1.3 1.83
Page 5
Compressible flow
Page 6
Compressible flow
Open Open
1/2 Open 3/4 Open
1/2 Open
1/4 Open
Flanged
Standard 45° elbow Long radiu Coupling Globe valve
k Total k Number k Total k Number k Total k Number k
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
0.35 0 0 0.2 0 0 0.04 0 0 6
Page 7
Compressible flow
Open Needle valve / plug diOpen Gate valve Open Butterfly valve
Total k Number k Total k Number k Total k Number k
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
0 0 9 0 0 0.17 0 0 0.4877305289
Page 8
Compressible flow
90
Page 9
Compressible flow
Page 10
Compressible flow
Page 11
Compressible flow
Page 12
Compressible flow
Page 13
Compressible flow
Page 14