Вы находитесь на странице: 1из 3

OTDR card (OTDR16-1)

• Monitor up to 16 fibers
• Can be exchanged without interrupting traffic
• Can operate with or without traffic
• Operating Wavelength 1625nm
Carrier Board (CCB-1) • Resolution: 1m
Contains: • Max measurement distance: >24dB (~ 100km, one
• Controller HW direction)
• 2-slots for daughter cards • Possible to measure from both sides into same fiber to
increase coverage
Suitable for all hiT 7300 NEs:
• ROADM Passive optical filter card, C/L band splitter (OBDR8-1)
• OLR • OBDR8 is installed after booster and before
• SON preamplifier
• OBDR8 is a C/L band splitter / combiner
• is used to connect external fiber to amplifier and
OTDR module
• Up to 8 external fibers can be connected – e.g.
bidirectional monitor of 4 directions
• Insertion loss: 0.4dB
• Can be used for extension to L-Band transmission in
order to increase capacity for 104 additional channels
in 50GHz grid
Wiring Diagram Light Path
(example for single line)

C/L-band
DWDM
splitter Preamp
Line In Test
Signal
Optional
Raman Reflected
Signal
2 out of 8 To/From OTDR16
splitter in
Connecti DWDM OBDR8 To/From OTDR16
on from Line Out Test
splitter
Optional Signal
to OTDR
Raman
Reflected
Signal C/L-band booster
DWDM Line splitter




Вам также может понравиться