Академический Документы
Профессиональный Документы
Культура Документы
All ratings data based on operation under ISO 3046 conditions using typical fan sizes and drive ratios. For operation outside of these conditions please consult your
Perkins Engines contact. Performance tolerance quoted by Perkins is ±5%.
Electrical ratings assume a power factor of 0.8 and a generator efficiency of 90%.
Rating Definitions
Prime power – Power available at variable load in lieu of main power network. An overload of 10% is permitted for one hour in every twelve hours of operation.
Standby power – Power available at variable load in the event of a main power network failure. No overload is permitted.
1000 Series 1006-6T
Standard ElectropaK
Specification ElectropaK General Data
• Base engine Number of cylinders 6
• Cast iron SAE 3 flywheel housing Cylinder arrangement Vertical, in-line
Cycle 4-stroke
• Flywheel
Induction system Turbocharged
• Flat bottomed aluminium sump Combustion system Direct injection
• Mechanical governor – speed control to Cooling system Water-cooled
Displacement 5.99 litres
BS5514 Class A1, ISO 3046-4M3
Bore and stroke 100.0 mm x 127.0 mm
• Rotary fuel injection pump Compression ratio 17.3:1
• 12V shut off solenoid – energised to run Direction of rotation Clockwise, viewed from the front
• Cold start aid Firing order 1,5,3,6,2,4
Total lubrication
• Spin-on full flow fuel oil filter
system capacity 16.1 litres
• Fuel pre-filter Coolant capacity
• Spin-on full flow oil filters (inc radiator) 27.7 litres
• Oil cooler Total weight (dry) 586 kg
Total weight (wet) 623 kg
• Thermostat controlled cooling system
• Gear driven water pump
• Fan drive and 22″ pusher fan Fuel consumption litres/hour (UK gallons/hour)
• Radiator (and piping) Power rating % 1800 rev/min
110 32.0 (7.0)
• Fan guards
100 29.2 (6.4)
• Front engine mountings
75 22.5 (5.0)
• 12V engine alternator
50 16.4 (3.6)
• 12V starter motor
• Air filter
• Oil pressure switch
• Coolant temperature switch
• 24V alternator
• 24V starter motor
• Water temperature gauge and sender 1378 mm 683 mm
• Heater/starter switch 1559 mm
Publication No. 1466/9/98 Printed in England by Fisherprint Ltd © Perkins Engines Company Ltd 1998
• Workshop manual
• Parts book
• User handbook
Distributed by