Академический Документы
Профессиональный Документы
Культура Документы
TECHNICAL MANUAL
MARCH 2006
TECHNICAL 1
SPECIFICATIONS
OF MATERIALS
CARCASSES - PLINTHS - HINGES
PRESSWOOD CARCASSES
Waterproof 19 mm panels made of wood-particles and treated with high
basic weight, melamine resin. European Regulation Class E1 compliant.
Finish: ivory or grey; rear border: melamine; front border: co-extruded
plastic matter with dust protection gasket.
Finish: graphite grey open-pore oak; rear and front border: melamine
of the same colour.
All presswood carcasses are equipped with a device for controlled closure
(Blumotion), mounted on one or more hinges.
BACK PANELS
Ivory and grey presswood:
Varnished Medium Density (thickness 3.5 mm)
Graphite grey oak presswood:
Medium Density (thickness 3.5 mm); melamine finishing.
Carcasses of corner base units 1.000x1.000 and of tall units with sliding
doors are delivered disassembled; back panels are finished according
to the finish of the carcass - melamine-finished presswood and tinted
multi-layer birch wood (thickness 8 mm).
SHELVES
Presswood (ivory, grey or graphite grey oak). 19 mm presswood with
same finish as carcass.
Upon request and additional payment all carcasses can be equipped Shelf in aluminium (upon request) Aluminium plinth
with shelves made of 16 mm extruded aluminium.
Shelves for carcasses with sliding doors are made of chromium-plated wire.
Low-voltage halogen lamps light up the inside of the tall unit when the door
is opened. The bottom is made of pressed aluminium.
Corner base units are equipped with revolving baskets of chromium-plated
metallic wire.
PLINTHS
Made from extruded aluminium.
Stainless steel treated with satin finish exclusive to Boffi.
Height: 80, 120, 150 and 210 mm.
(Adjustment h. 80 mm: -0/+10 mm h. 120/150/210 mm.: -5/+20 mm)
Plinths come with a telescopic system that allows the user to adjust them
both in height and in depth. In addition they are equipped with a gasket
located between the plinth and the floor (registered decorative and
functional Boffi patent). 95° hinge, built-in Blumotion
HINGES
The hinges are made of 1.2 mm nickel-plated, pressed metal sheets.
They are equipped with spring mechanisms for closing and opening
and are adjustable in depth, height, and width. They allow for a 95° aperture
with built-in Blumotion and 165° aperture with Blumotion on the carcass.
The hinge board is made of die-cast alloy and fixed on the side panel.
SPECIFICATIONS
OF MATERIALS
DRAWERS, HEAVY-DUTY DRAWERS AND IRONWARE
SHELF BRACKETS
Made of stainless steel. Equipped with a device that ensures a secure
and precise fixing of the shelf.
IRONWARE
Made of anti-oxidation treated nickel-plated metal.
ELECTRICAL APPLIANCES
Boffi S.p.a. recommends a list of electrical appliance brands: AEG -
ELECTROLUX - ELICA - GAGGENAU - MIELE - SCHOLTES - SIEMENS -
WHIRLPOOL - ELICA hoods. All recommended brands are in compliance
with EC standards, 220-230 V - 50 Hz voltage.
Prices of finished units and doors for electric appliances placed under
the worktop or doors for hoods include installation.
Upon request Boffi produces carcasses with housing compatible with
customers' electrical appliances.
BURNER ADJUSTMENT
All burners use methane gas. The use of different gases must be specified
upon order. Stainless steel plate-rack for wall unit
TECHNICAL 3
SPECIFICATIONS
OF MATERIALS
DOORS AND FRONT PANELS - th. 23 mm
STANDARD LAMINATE
1. HPL rigid 0.9 mm thick laminate.
2.Trim made of 1,2 mm aluminium profiles or ABS plastic, only white.
3. Waterproof panels made of wood-particle panels - class 1.
LAMINATE BOFFI
1. HPL rigid 0.9 mm thick laminate
2.1 mm trim in wood or aluminium.
3. Waterproof panels made of wood-particle panels - class 1.
WOOD VENEER
1. Made of waterproof wood-particle panels - class 1.
2.0,6 mm wood veneer.
3. 1 mm wood trim.
Varnished with natural polyurethane base varnishes and finished with
transparent polyurethane varnishes. Standard essences: bleached oak,
dark oak, graphite oak, reconstructed wood ebony-like, reconstructed
Alpi Nero wood, reconstructed pinewood-like.
FRAMES - WOOD+WOOD
1. 20 mm toulipier frame covered with a sheet of bleached oak or graphite
grey oak.
2. panel made of a 16 mm thick wood-particle panel with bleached oak
or graphite grey oak veneer, finished with transparent polyurethane varnishes.
STAINLESS STEEL
1. Pre-satinised, box-type-structured, 0.8 mm stainless steel.
2.Panels of inert plastic matter.
SPECIFICATIONS
OF MATERIALS
DOORS AND FRONT PANELS - th. 23 mm
WHITE CORIAN®
1. Surfaces and edges made of 3 mm panels in white Corian®
2.Honeycomb board in Medium density.
FRAME ALUMINIUM+GLASS
1. Frame in naturally anodised aluminium, Factory type.
2.4 mm tempered glass: frosted, pressed, white varnished, black varnished
and silvered.
To be used with wall and tall units.
ALUMINIUM SHUTTER
1. Frame of naturally anodised aluminium bars, Factory type with
aluminium shutters.
To be used with wall units H= 600 mm.
MOD. CASE SYSTEM 2.3 - XILA 2.3 in: setasil - mat plus - polyester -
wood - stainless steel - white Corian®- aluminium
Finishes and materials: standard Boffi.
Pocket-handle in anodised aluminium, centrally positioned.
SPECIFICATIONS
OF MATERIALS
HANDLES
14
147
The size and position of the handles are at the discretion of the designer. If they will be not panel wide -120 mm which is 60+60). This handle can be used with varnished or lacquered doors,
specified, the handle would be standard positioned. On hinged doors please attention to the wood, Corian® or aluminium doors.
horizontal centred handles: on next base units they can interfere while opening. On the front The Xila handle, recessed into the door or frontal panel, W. 120 mm. can be used too. Right or left
panels of drawers, heavy-duty drawers, tall units with pull-out doors and dishwashers handles positioned when mounted on hinged door, central on drawers-heavy-duty drawers-dishwashers
must always be horizontal and centred. In the LT model the handle is central positioned, and on tall units with single pull-out door. This handle can be used with varnished or lacquered
recessed into the door or frontal and wide as the door/frontal (handle wide= door or frontal doors, wood, Corian® or aluminium doors.
6
TECHNICAL
SPECIFICATIONS
OF MATERIALS
BOFFI LAMINATE (MAX. 4.000 X 1.300 mm)
1804 1812
BLUE NIGHT YELLOW OCHRE
WOOD
SPECIFICATIONS
OF MATERIALS
138
SLATE
027 110
BLACK ORANGE
STAINLESS STEEL
ALUMINIUM
GLASS
SAND BEIGE CLAY BROWN CONCRETE GREY CHARCOAL BLACK GRAVEL GREY CHALK WHITE
TECHNICAL 8
SPECIFICATIONS
OF MATERIALS
WORKTOPS
DEPTH IN mm LENGHT IN mm
max. min.
SPECIFICATIONS
OF MATERIALS
WORKTOPS
DEPTH IN mm LENGHT IN mm
max. min.
STAINLESS STEEL DESIGN BOFFI - GRAND CHEF 630 - 830 4.000 1.000
1. 1 mm AISI 304 stainless steel sheets, double basin
effect - satinised polished finish
2. Panel made of 1st class waterproof wood-particles.
Thickness: 110 mm.
STONE: BIHARA-CARDOSO.
MARBLE: CARRARA WHITE.
GRANITE: BLACK ZIMBAWE.
ZODIAQ®.
1. Marble, stone, granite, Zodiaq®. 350 - 630 Marble
Marble, stone, granite: matt with anti-stain 705 - 830 Granite
treatment, waterproof. 900 - 980 2.700 600
Zodiaq®: matt finish. 1.260 Stones
2. Support in EULITHE 2.400 600
Thickness: 20-40-60-80 mm. Zodiaq®
3.000 600
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
BUILT-IN SINKS
50
50
50
50
In stainless steel, satinised polished finish,
equipped with siphon.
500
400
500
500
500
400
400
400
TO BE USED WITH TOPS IN:
50
35
50
50
50
50 450 90 50 450 360 50 450 275 50 50 450 660
Laminate 590 860 860 1160
Wood Drawn = sink on the left Drawn = big sink on the left Drawn = sink on the left
Satinised polished stainless steel Mirrored = right Mirrored = right Mirrored = right
White Corian®
Zodiaq®
50
50
50
50
Stone-marble-granite
500
400
500
500
400
400
500
400
50
50
35 35 50 35
50
50 400 40 40 50 40
450 275 350 340 400 420 500 340
1160 860 860 970
Drawn = sink on the left Drawn = sink on the left
Mirrored = right Mirrored = right
830
50
200 340
50
200
500
400
340 150
440
100
50
830
50
300
500
400
50
340
500
400
100
50
50
40 50 50
50
515 415 40
400
50
340 330 400
970 1160 500
830
200
500
275
830
30
400
500
400
500
300
500
400
340
40
50 20 910 730
50 50 330 150
400
500 970 790
860
UNDER-MOUNTED SINKS
In stainless steel, satinised polished
460
400
300
500
460
400
500
R=
r= 50
80
5
275 150
TO BE USED WITH TOPS IN:
12
450
5
14
R=
510 510
R=
335 340
Stone - marble-granite - Zodiaq® 550 550 350 394
400
454
400
454
r= 50 r= 50 r= 50
400
400
400
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
TECHNICAL 11
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
488
498
505
498
TO BE USED WITH TOPS IN:
Laminate
Wood
White Corian®
1000
Zodiaq® 988
Stone-marble-granite
400
454
400
454
r= 50 r= 50
510
498
Minimal top depth = 630 mm
500 400
554 454
=
=
400
480
400
480
400
454
400
480
r= 50
=
=
=
40 90 r= 10 70 40 70 90 r= 10
340 450 40 450 450 90 r= 10 340 340
394 580 1100 880
280
∅ 313
400
480
400
480
180
=
=
Flush-mounted dustbin
FLUSH-MOUNTED SINKS
In CRS stainless steel, Scotch Brite
finish, with basin sanded inside,
580 580 580 580
equipped with siphon.
1 2
Laminate
Wood
White Corian®
540 850
Zodiaq® 980 770 850
Stone-marble-granite
400
480
400
480
400
480
400
480
980
580
510
580
580
510
510
400
480
35
980
580
510
40 810 130
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
TECHNICAL 12
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
FLUSH-MOUNTED INSETS
In stainless steel, satinised polished
20
20
25,5 31 450 35 275 31 25,5
finish, equipped with siphon.
1 4 a 1 4
540
580
540
580
2 3 5 2 3 5
TO BE USED WITH TOPS IN:
400
462
513
b a b
Laminate a b
20
20
20 1720 20 20 1720 20
Wood 1760 1760 873
White Corian® Drawn = sink on the left Drawn = sink on the left
Zodiaq® Mirrored = right Mirrored = right Drawn = big sink on the left
( ) Stone-marble-granite Mirrored = right
56,5
56,5
56,5
WELDED SINKS
56,5
300
400
513
400
513
400
513
TO BE USED WITH TOPS IN:
56,5
56,5
56,5
275 25 150 35
56,5
56,5 450 56,5 56,5 450 366,5 56,5 450 275 56,5
563 563 873 873
Stainless steel, satinised polished
finish stainless steel, design Boffi: Drawn = tap hole on the right Drawn = small sink on Drawn = sink on the left Drawn = big sink on the left
Factory Mirrored = left the right / Mirrored = left Mirrored = right Mirrored = right
Grand chef
31
56,5
462
400
400
462
400
513
3"
Minimal top depth = 630 mm
31
30 21
56,5
Drawn = small sink on Drawn = big sink on the left Drawn = sink on the left
the right / Mirrored = left Mirrored = right Mirrored = right
340 150
31
31
31
=
290
500
462
400
300
462
400
462
400
31
31
31
=
21 50 21 400 50 350
21 21 21 50 21
500 340 515 375 400 340 290
800
932 932 1122
Drawn = big sink on the left Drawn = sink on the left Drawn = big sink on the left
Mirrored = right Mirrored = right Mirrored = right
500
500
500
290
100
235
a
400
462
500
400
462
475
400
400
240
c
b b a
35 910 730
330 340 340 35 400
932 752
705 775
Drawn = big sink on the right Drawn = big sink on the right
Mirrored = left Mirrored = left
400
400
400
400
60
340 400 450 450 450
960
Drawn = drain hole on Drawn = drain hole on Drawn = drain hole on
the right / Mirrored = left the right / Mirrored = left the right / Mirrored=left
400
400
60
400 340
800 750 ÿ 274
Drawn = big sink on the left Drawn = big sink on the left
Mirrored = right Mirrored = right
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
TECHNICAL 13
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
WELDED SINKS
In CRS stainless steel, Scotch Brite
400
finish, with basin sanded inside,
400
400
305
equipped with siphon. 500 50 340
510 340 890 500
TO BE USED WITH TOPS IN: Drawn = drain hole on Drawn = drain hole on Drawn = big sink on the left Drawn = drain hole on
CRS stainless steel, Scotch Brite finish the right / Mirrored = left the right / Mirrored = left Mirrored = right the right / Mirrored = left
400
500
400
400
500 50 500
1050 800 270 400
400
400
400
400
400 100 270 810 400 205 165 400 100 400
1100
510
510
510
510
930
940
510
510
790 R= 10 R= 10 1377 R= 10
1084
Minimal top depth = 630 mm
60 60 60
790 1084 1377
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units,
built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICAL 14
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
513
580 580 580
2 4 3
5
finish / grids in cast iron 4 5
1 4 1 4
613
950 1090 1090
TO BE USED WITH TOPS IN:
Laminate
Wood
White Corian®
Zodiaq® 670 1180 1180
Stone-marble-granite 4 6
580
1 2
480
480
480
1 2 1 2 3 4 1 2 3
3 5
Minimal top depth = 630 mm
( ) Minimal top depth = 705 mm 1280
146
84
84
84
Design Boffi
1 3 1 4 1 4
Stainless steel: satinised polished
462
630
462
630
462
630
400
630
1 2
2 4 2 5 2 3 5
finish / grids in cast iron 3
84
84
84
84
592 822 822 700
TO BE USED WITH TOPS IN:
146
146
146
Satinised polished stainless steel
Stainless steel, design Boffi:
2 3
400
630
400
630
Factory 1 2 3 1 2 3 4
600
830
Grand Chef 1 4
84
84
Latina 1000 1300
84
800
146
146
146
1 2 1 2 3
600
830
( ) Grand Chef top
1 4 6
84
84
600 900
84
1100
• • •
146
146
146
2 3 2 3 5
600
830
600
830
400
630
1 2 3 4
1 4 1 4 6
84
84
84
• • •
87
87
87
87
1 3 1 4
1 3 1 4
456
630
456
630
456
630
456
630
2 4 2 5
3 3
2 4 2 5
87
87
87
87
110
190
110
190
110
190
87
1 4
456
630
2 3 5
87
732
110
190
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units,
built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICAL 15
SPECIFICATIONS
OF MATERIALS
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
60
60
60
CRS stainless steel, grids in cast iron 2 2
510
630
510
630
510
630
1
60
60
60
1 1
60
60
60
2 4 2 5 4 6
510
630
510
630
510
630
3 1 2
60
60
60
1 3 1 4 3 5
60
67,5
1 2 3
3
2
495
630
510
630
67,5
4 5
1 4
60
770 560
110
190
60
60
60
2 2
510
630
510
630
510
630
1
60
60
60
1 1
110
190
110
190
• • •
60
60
60
2 4 4 6 2 5
510
630
510
630
510
630
1 2 3
60
60
60
1 3 3 5 1 4
110
190
110
190
• • •
195
195
270
270
270
630
630
630
1 2 1 2 3 1 2 3 4
105
105
105
60
60
60
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units,
built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICAL 16
SPECIFICATIONS
OF MATERIALS
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
UNI 600 mm externally vented/re-circulated hood, UNI 1200 mm externally vented/re-circulated hood, 340
480/650 mm deep in stainless steel. 480/650 mm deep in stainless steel. a
600
Technical features: Technical features: 140
Voltage 220 V/240, 50 Hz. (110 V - 60 Hz) - Maximum Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum
capacity 750 m3/h - 3 speeds - 2 grease filters in capacity 750 m3/h for W = 1.200/1.800 mm - 3 speeds
c 480
anodised aluminium 234x318 (dishwasher washable) 2 grease filters in anodised aluminium 234x318
650
Absorbed power 200 W - Outlet diameter 150 mm (dishwasher washable) for W. 1.200 hood - 5 grease
with safety valve+outlet reducer 150/120 - filters in anodised aluminium 234x318 (dishwasher
b
2 x 20 W halogen spot-lights. washable) for W. 1.800 hood - Absorbed power 200
W for W = 1.200/1.800 mm - Outlet diameter 150 mm
UNI 900 mm externally vented/re-circulated hood, with safety valve+outlet reducer 150/120 - L d
480/650 mm deep in Scotch Brite stainless steel. 2 x 20 W halogen spot-lights for W = 1.200 mm
3 x 20 W halogen spot-lights for W = 1.800 mm
Technical features:
Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum
capacity 750 m3/h - 3 speeds - 2 grease filters in
anodised aluminium 234x318 (dishwasher washable)
a. Activated carbon filter for re-circulating version
Absorbed power 200 W - Outlet diameter 150 mm b. Control panel
with safety valve+outlet reducer 150/120 - c. Grease filters made of anodised aluminium
2 x 20 W halogen spot-lights. d. Halogen spot-lights
600 mm externally vented/re-circulated stainless Technical features: 600 / 900 / 1200 320
steel concealed hood, H 600 mm, with flap door. Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum
900 mm externally vented/re-circulated stainless capacity 600 m3/h - 3 speeds - 3 grease filters in
steel concealed hood, H 600 mm, with flap door. anodised aluminium (dishwasher washable)
600
1.200 mm externally vented/re-circulated stainless for W 900 hood - 4 grease filters in anodised
steel concealed hood, H 600 mm, with flap door. aluminium (dishwasher washable) for W. 1.200 hood.
342 590
Absorbed power 300 W for W=900 mm = =
95
Outlet diameter 150 mm with safety valve+outlet
reducer 120 - 2 x 50 W halogen spot-lights
The 110V-60 Hz hoods are in compliance with UL-USA
900/1200/1800
WORKS 900 mm externally vented/re-circulated Technical features:
wall-mounted hood, in stainless steel+glass, 600 mm Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum
100
deep, with remote control, 4 aluminium grease filters. capacity 600 m3/h - 4 speeds - 4 grease filters in a
Stainless steel + glass / Stainless steel anodised aluminium 250x300 (dishwasher washable)
500
b
for W 900 hood - 6 grease filters in anodised c
WORKS 1.200 mm externally vented/re-circulated aluminium 250x300 (dishwasher washable)
100 100
wall-mounted hood, in stainless steel+glass, 600 mm for W 1.200 hood - 12 grease filters in anodised
deep, with remote control, 6 aluminium grease filters. aluminium 250 x 300 (dishwasher washable)
Stainless steel + glass / Stainless steel for W 1.800 hood - Filter saturation indicator
(100 hours), with RESET button - Power 240 W -
WORKS 1.800 mm. externally vented/re-circulated Absorbed power 400 W for W = 1.200 mm - d
wall-mounted hood, in stainless steel+glass, Outlet diameter 150 mm with safety valve - 3 x 20 W
300
d
300
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica. 700
TECHNICAL 17
SPECIFICATIONS
OF MATERIALS
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
33 16
W 1.200 mm - Without chimney, variable height
(chimney to be ordered separately). 800 - 1100 500
2020
900 - 1200 600
16
to be ordered separately).
33
800 - 1100 500
2020
540
Stainless steel externally vented/re-circulated Technical features: = = 357
group “Flat-Kap” W 800 mm, to match always Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum
with wall-fixed “FLAT” sail. capacity 1.000 m3/h - 6 speeds - 1 grease filter
Without chimney, variable height (chimney in anodised aluminium (dishwasher washable) -
H
to be ordered separately). Filter saturation indicator - Outlet diameter 150 mm
with safety valve - 2 x 20 W halogen spot-lights.
Stainless steel externally vented/re-circulated
group “Flat-Kap” W 1.100 mm, to match always The 110V-60 Hz hoods are in compliance
33
540 387
Stainless steel externally vented/re-circulated = = = =
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
TECHNICAL 18
SPECIFICATIONS
OF MATERIALS
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
16
2020
1200 ˜ 4000 600
L
16
2020
1200 ˜ 4000 700
L
A = =
B A
B
ÿ 150
H
=
B
=
A = =
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
TECHNICAL 19
SPECIFICATIONS
OF MATERIALS
ELECTRICAL APPLIANCES, DESIGN BOFFI -
FREE-STANDING REFRIGERATORS-FREEZERS
30
American fridge-freezer, free-standing, entirely covered
in stainless steel, top cover in stainless steel, aluminium
1047
handle mod. STEEL, stainless steel finish.
Design CRS Boffi, total capacity 619 lt (fridge 441 lt-freezer 178 lt)
1800
replaceable tempered glass shelves, 3 drawers with moisture
control, eggs and butter containers, inside light, silent automatic
610
moisture control, reversible doors, large thermal insulation.
Voltage: 230 V, 50 Hz.
Noisiness: 46 dB 710
110
788
830 828
Freezing capacity: 10 kg/24 h.
Annual power consumption: 577 kWh/year
Power-efficiency class: A
mod. MB2227PEHW
1570
min. 500
25
American fridge-freezer, free-standing, entirely covered
537
in stainless steel, aluminium handle mod. STEEL,
stainless steel finish.
1715
Total capacity: 475 lt (339 lt fridge + 136 lt freezer),
1057
anti-corrosive sheets, replaceable shelves,
2 crispers with moisture control, reversible doors.
Voltage: 220-240 V, 50 Hz.
Noisiness: 48 dB 667
96
702 732
Freezing capacity: 5,13 kg/24 h.
Annual power consumption: 642 kWh/year
Power-efficiency class: A
780
mod. GT1727PVC
1400
30
788
Noisiness: 46 dB 1684 828
min. 500
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by:
AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICAL 20
SPECIFICATIONS
OF MATERIALS
ELECTRICAL APPLIANCES, DESIGN BOFFI -
FREE-STANDING REFRIGERATORS-FREEZERS
25
American fridge-freezer, free-standing, entirely covered in stainless
steel, aluminium handle mod. STEEL, stainless steel finish.
Fridge:
capacity 412 lt with 3 replaceable tempered glass shelves, 3 drawers
with moisture control, 3 lights, on wheels (2 fixed + 2 swinging),
1680
1785
adjustable feet, wine bottle-holder, cheese/milk containers with
transparent door, pull-out eggs-holder, tall bottles holder.
No-frost, silent.
Freezer:
capacity 229 lt 3 replaceable glass shelves,2 metal wire baskets. 620
80
912 740
2 ice buckets, 1 light, 5 door-fixed boxes.
Voltage: 230 V, 50 Hz
Noisiness: 47 dB
Freezing capacity: 14 kg/24 h
1170
Total capacity 641 lt
Annual power consumption: 757 kWh/year
Power-efficiency class: B
mod. GC23B27-PED
min. 450
25
Fridge-freezer with ICE MAKER and DISPENSER,
free-standing, entirely covered in stainless steel,
aluminium handle mod. STEEL, stainless steel finish.
Fridge:
capacity 418 lt, 3 replaceable glass shelves, 3 drawers
1760
1785
with moisture control, 3 lights on wheels (2 fixed + 2 swinging),
adjustable feet, wine bottle-holder, cheese/milk containers
with transparent door, pull-out eggs-holder, tall bottles holder.
No-frost, silent.
Freezer: 620
80
912 740
capacity 211 lt., 3 replaceable glass shelves, 2 metal wire baskets,
2 ice buckets, 1 light, 3 door-fixed boxes.
Voltage: 230 V, 50 Hz
Noisiness: 47 dB
1170
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by:
AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
BASE UNITS 21
H = 660 - plinth 210 mm
H = 720 - plinth 120/150 mm
H = 790 - plinth 80 mm
w/shelves w/1 drawer w/3 drawers w/4 drawers w/2 heavy-duty drawers
w/frontal
linear corner under hob-unit: w/shelf panel w/1 drawer+1 heavy-duty drawer w/4 drawers w/2 drawers+1 heavy-duty drawer
under sink: w/2 heavy-duty drawers under-sink unit: w/doors w/dustbin f/differentiated waste-disposal
under sink: w/2 heavy-duty drawers linear corner internal corner for oven with castors or chromium-plated feet in steel or wood: w/drawers
with shelves- Factory door frame+glass with WK6 door frame+glass sliding doors w/shelves corner with shelves sliding doors w/shelves - Factory door frame+glass
tall unit: storage system storage system with COMPLEMENTARY TALL UNITS:
broom cupboard with 2 doors single door with shelves storage system for oven ( ) tall units 345 mm deep.
TALL UNITS 23
Madia tall units: Tall units: Upper tall unit element:
H = 1.280 mm
H2 = 1.400 - plinth 210 mm H = 1.900 - plinth 120/150 mm
H = 1.300 mm
H2 = 1.460 - plinth 210/150 mm H = 2.000 - plinth 210 mm
H2 = 1.530 - plinth 80 mm H = 2.060 - plinth 120/150 mm
H = 2.130 - plinth 80 mm
H = 2.340 - plinth 80/120/150 mm
TALL UNIT
for oven for double oven for fridge/freezer upper tall unit element for big fridge upper tall unit element
( ) tall units
with shelves in chromium- electrified unit for small with shelves in chromium- electrified unit for small for microwave ovens and coffee 345 mm
plated wire. el. appliances. plated wire. el. appliances. machine. deep too.
Depth: 480 mm Depth: 480 mm Depth: 623 mm Depth: 623 mm Depth: 623 mm
WALL UNITS 24
with 1 shelf (available for upper-wall unit version too) corner stainless steel plate-rack corner plate-rack
with 1 shelf corner stainless steel plate-rack corner plate-rack shelving system corner shelving system
external upper-hood unit for totally concealed hood for built-in hood open-faced compartment in wood wood w/shutter WK6 door frame+glass: flap door WK6 door frame+glass: hinged door
Factory door frame+glass: flap door Factory door frame+glass: hinged door Alu door with shutters: flap door frontal panel for external hoods doors for concealed hoods
with 1 shelf corner stainless steel plate-rack corner plate-rack shelving system
with 3 shelves corner stainless steel plate-rack corner plate-rack with hand-rail, wall units
H = 440-600 mm excluded
CASE SYSTEM 2.3 25
(23 mm doors and frontal panels).
Finishes: setasil - matplus - wood - polyester -
stainless steel - white Corian® - aluminium.
base units depth 574/674 mm under-top supporting frame in aluminium w/2 heavy-duty drawers end-of-composition side panel for tops
with shelves under-sink unit profiles used as hand-rail w/2 internal drawers w/2 drawers+1 heavy-duty drawer + 1 internal drawer d. 1260/1030 mm in island positions
supporting beams
panel
peninsula unit with heavy-duty drawer - wood or aluminium island bifrontal unit
end-of-composition
tall units: with shelves for oven for oven w/heavy-duty drawers for double oven for refrigerator side panel
Tall units:
H = 2.130 - plinth 50 mm
H = 2.340 - plinth 50 mm
D = 625 mm
For Case System 5.0 it is obligatory to use finished end-of-composition side panels th. 92 in base and tall units.
The tall unit modules are proposed with 2/3/4 modules, covered by 10 mm finished covering panel.
The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
WORKTOPS 27
C.R.S. SCOTCH BRITE STAINLESS STEEL TOPS a. 1 mm. AISI 304 stainless steel sheets, Scotch Brite finish
D= 705-1.260 mm b. wood perimetrical frame
Max L. 4.000 mm c. support made of coupled aluminium panels
Welded sinks and hob units in CRS stainless steel.
Finishes:
CRS stainless steel - white Corian®
The tops 705 mm deep are available for wall-mounted and island solutions.
Please use 23 mm rear panels in island solutions.
The tops 1.260 mm deep are available for island solutions with opposing base units.
In Case System 2.3 is possible to have standard base units in island solution
+ base units with same depth of wall unit and 1.030 mm deep top.
bread-
w/shelves w/2 drawers + 1 heavy-duty drawer w/2 heavy-duty drawers holder pan-holder w/2 internal drawers
w/waste
under-hob unit: w/2 drawers + heavy-duty drawer under-sink: with aluminium bottom disposal w/differentiated waste-disposal
fridge/washing
door: dishwasher machine rear panel
tall unit: w/shelves w/shelves and single door storage unit linear corner w/shelves w/chromium-plated complementary tall unit: tall unit: broom cupboard
w/internal drawers baskets f/oven w/shelves
end-of-composition panels Diagram for using spacers between tall units and tall unit and end-of-composition
600 625
16 22
600 600
43
20
20
27
2
2
140
500
514
2
140
500
2
716
680
680
870 / 840
870 / 840
720
720
57 540
3
432
57 540
3
2
2
150/120
150/120
150/120
150/120
20
20
70 23 70 23
2 2
98 98
78 410 112 78 410 112
3
27
16 301
20
43
16 23
320 23
320
290
(h - 4) mm.
h - 40
h
320 23
20
2
345
h. cm 44 n° 1 shelf 2 hinges
h. cm 60 n° 1 shelf 2 hinges
h. cm 72 n° 1 shelf 2 hinges
h. cm 88 n° 2 shelves 2 hinges
h. cm 116 n° 3 shelves 3 hinges
All doors are 23 mm thick, excepted the 20mm WK6 door with pocket-handle.
DIAGRAMS 31
20
43
2
560
2
20
140
140
500
27
282
2
2
140
140
514 500
2
2
750
140
790
870
57 540
2
750
3
790
786
502
502
870
360
57 540
3
2
2
80
20
80
70 23
2
20
80
80
2
70 23 98
2 78 410 112
98
78 410 112
625 625
600 600
560 560
20
20
2
2
514 514
656
656
620
620
660
660
870
870
57 540 57 540
3 3
2
2
20
20
210
210
210
210
350 23 70 23
2 2
378 98
78 130 392 78 410 112
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
DIAGRAMS 32
Tall unit
(side panel code N)
625
600
560
20
2
625 625 625
2
600 600 20 600
598
560 560 560
20
20
20
20
525 / 685
556 / 716
690
1336
1310
1064
4
2420
20
20
2336
2340
1900 / 2060
2210
2000
1960
2050 / 2210
2020 / 2180
2130
1250
4
1310
20
20
1336
514
786
760
598
57 540
3 57 540 57 540
57 540
3 3 3
20
210
2
150/120
150/120
2
20
20
20
80
80
80
80
70 23 70 23 70 23
2 2 2
98 98 98
78 410 112 78 410 112 78 410 112 78 410 112
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
DIAGRAMS 33
Base unit with single pull-out door, Base unit with 2 heavy-duty drawers,
2 internal drawers, 1 internal drawer with stainless steel front panel,
w. 450 - 600 mm w. 450 - 600 - 900 mm
574/674 574/674
550/650 1 23 550/650 1 23
15
70 70
70 70
10 500
15
500
84
10
407
500
84
500
20/120 532
40
850
852
852
36
692
4 20/120 532
902
902
690
692
583
407
500 500
40 251
40 251
50
50
20
20
2
2
25 25 25 25
426 62 426 62
Under-sink base unit with 1 heavy duty drawer Under-sink base unit with pull-out door
+ flap door + differentiated waste disposal, + differentiated waste disposal,
w. 900 - 1.200 mm w. 600 - 900 - 1.050 - 1.200 mm
574/674 574/674
550/650 1 23 550/650 1 23
15
110 155
110 155
15
407
200 200
25 40
25 40
850
852
852
36
457
457
902
902
461
461
407
400 400
251
251
20 110
20 110
40
40
50
50
105/205 105/205
Ø140 25 25 Ø140 25 25
426 62 426 62
Base unit with 2 drawers Corner base unit with pull-out door,
+ 1 heavy-duty drawer, with 1 half-circular chromium - plated wire basket,
w. 450 - 600 - 900 mm 1.395 x 795 mm
795
574/674 574/674
550/650 1 23 550/650 1 23
15
70 70
70 70
500
197
15
3
207
500
850
852
852
36
622
20/120 532
902
902
4
622
407
500 500
40 251
40 251
20 70
20 70
50
50
25 25 25 25
426 62 426 62
Please note: side panel d. 650 to be used with 705 mm deep tops, in wall-mounted, in island compositions. Standard wall units without handle.
island and peninsula compositions. Side panel d. 550 to be used with 1.260 mm deep tops, Standard tall units with aluminium hand-rail or STEEL handle.
DIAGRAMS 34
Suspended base unit Suspended base unit Suspended under-sink base unit
with heavy-duty pull-out drawer, with 2 heavy-duty pull-out with flap door,
w 600 - 900 - 1.200 mm drawers, w. 600 - 900 mm w. 900 - 1050 - 1.200 mm
574/674 574/674 574/674
550/650 1 23 550/650 1 23 550/650 1 23
70 99
99
99 500
197
19
20 20
409
409
409
407
407
407
2
290
290
220
500 500
208
20
20
20
2
2
2
Peninsula base unit with pull-out heavy-duty drawer,
totally in wood or anodised aluminium finish,
w. 900 - 1.200 - 1.800 mm
724
700 1 23
12 876 12 12 586/886 4 586/886 12
12
30
418
442
462
500
20 30
12
1174
1150 1 23
4 12
12 876 12 1 12 586/886 586/886 12
12
30
418
442
462
500
20 30
12
Please note: suspended base units d. 650 to be used with 705 mm deep tops, in wall-mounted or island compositions.
suspended base units d. 550 to be used with 1.260 mm deep tops, in wall-mounted or island compositions.
DIAGRAMS 35
Base unit with single pull-out door, Base unit with 2 heavy-duty drawers,
2 internal drawers, 1 internal drawer with stainless steel front panel,
w. 450 - 600 mm w. 450 - 600 - 900 mm
675/601 675/601
624/550 1 50 624/550 1 50
20 20
15
70 70
70 70
10 500
15
500
84
10
407
500
84
500
94/20 532
40
850
36
852
852
692
692
4 94/20 532
902
902
690
4
583
407
500 500
251
251
40
40
50
50
20
20
2
2
25 25 25 25
426 62 426 62
Under-sink base unit with 1 heavy duty drawer Under-sink base unit with pull-out door
+ flap door + differentiated waste disposal, + differentiated waste disposal,
w. 900 - 1.200 mm w. 600 - 900 - 1.050 - 1.200 mm
675/601 675/601
624/550 1 50 624/550 1 50
20 20
15
110 155
110 155
15
407
200 200
25 40
25 40
850
36
852
852
457
457
902
902
461
461
407
400 400
251
251
20 110
20 110
40
40
50
50
2
179/105 179/105
ÿ140 25 25 ÿ140 25 25
426 62 426 62
Base unit with 2 drawers Corner base unit with pull-out door,
+ 1 heavy-duty drawer, with 1 half-circular chromium-plated wire basket
w. 450 - 600 - 900 mm 1.395 x 795 mm
675/601 675/601
624/550 1 50 624/550 1 50
20 20
15
110 155
110 155
15
407
200 200
25 40
25 40
850
36
852
852
457
457
902
902
461
461
407
400 400
251
251
20 110
20 110
40
40
50
50
2
179/105 179/105
ÿ140 25 25 ÿ140 25 25
426 62 426 62
Please note: side panel d. 624 to be used with 705 mm deep tops, in wall-mounted, island and peninsula compositions.
side panel d. 550 to be used with 1.260 mm deep tops, in island compositions.
DIAGRAMS 36
Tall unit with single pull-out door, Tall unit with lower dishwasher
w. 600 mm and upper pull-out door,
(1) Stainless steel door - (2) Wood/Corian® door w. 600 mm
603 603
552 1 50 552 1 50
20
20
500 500
84
84
20
4
700
700
730
10 10
84
84
500 500
500 500
135
135
(1) 1590 - (2) 1602
20
200 20
15
15
1740
1740
1600
1600
1537
1537
10
1307
1307
84
500
20
840
556
855
1037
1037
4
925
925
652
500
251
200
20 20
70 65
70 20
200
150
140
140
20 25 20 25
552 552
Tall unit with upper oven Tall unit with upper oven
and lower pull-out door, and lower dishwasher,
w. 600 mm w. 600 mm
603 603
552 1 50 552 1 50
20
20
500 500
84
84
20
4
700
700
730
10 10
84
84
500 500
500 500
135
135
(1) 1590 - (2) 1602
20
200 20
15
15
1740
1740
1600
1600
1537
1537
10
1307
1307
84
500
20
840
556
855
1037
1037
4
925
925
652
500
251
200
20 20
70 65
70 20
200
150
140
140
20 25 20 25
552 552
DIAGRAMS 37
630
plane
600 600
aluminium supporting frame
35
560 520
20
20
2
140
500
514
282
2
140
500
34
34
716
680
680
870 / 840
905 / 875
870 / 840
720
720
57 540
400/470
3
400
57 540
3
2
2
150/120
150/120
150/120
150/120
20
20
70 23 70 23
2 2
100 100
78 410 112 78 410 112
625
600 600
20
2
2
2
140
500
514
282
2
140
500
34
34
750
750
790
790
786
870
870
57 540
3
470
470
57 540
3
2
2
2
20
80
80
80
20
80
70 23 70 23
2 2
100 100
78 410 112 78 410 112
3
16 301 h. cm 60 n° 1 shelf 2 hinges
20
h. cm 72 n° 1 shelf 2 hinges
2
h. cm 88 n° 2 shelves 2 hinges
h. cm 116 n° 3 shelves 3 hinges
290
(h - 4) mm.
h - 40
h
320 23
20
2
345
DIAGRAMS 38
625
600
560
20
2
625 625
600 600
598
560 560
20
20
20
525 / 685
556 / 716
1336
1310
1064
4
2420
20
2336
2340
1900 / 2060
2210
2050 / 2210
2020 / 2180
2130
4
1310
20
20
1336
514 514
514
786
760
598
150/120
2
20
20
20
80
80
80
80
70 23 70 23 70 23
2 2 2
100 100 100
78 410 112 78 410 112 78 410 112
2535
20 19 600 19 600 19 600 19 600 19 20
625
Oven
DIAGRAMS 39
HOW TO CALCULATE THE WORKTOP LENGTH DIMENSIONS OF BASE UNITS AND CORNER WALL UNITS
BASE UNITS WALL UNITS
1150 1150
900 700 450
345
> with chromium-plated > with stainless steel
Top 630
Top 630
plate-rack.
600
625
wire basket.
700
700
> with 'MAGIC' corner.
345
> with chromium-plated > with stainless steel
Top 630
Top 630
wire basket. plate-rack.
600
625
700
700
> with 'MAGIC' corner.
345
> with chromium-plated
Top 630
Top 630
wire basket. plate-rack.
625
700
1000
Internal corner base unit
300
342
625 Top 630
Top 630
645 900
Top 630
625 > with shelf.
345
Top 830
> with shelf.
900
Top 630
600
“a” Top L= 600 + 600 + 1.000 - 630= 1.570 mm (+ customised solution for 90° worktop)
645
625
“b” Top L= 1.000 + 600 + 645 + 5= 2.250 mm (+ customised solution for 45° worktop)
“c” Top L= 5 + 645 + 600 + 600 + 700= 2.250 mm
45
“d” Top L= 1.300 + 1.200 + 600 + 1.150 - 630= 3.620 mm (+ customised solution for 90° worktop) 45
600
“e” Top L= 600 + 600 + 600 + 700 - 630= 1.870 mm External corner base unit 342
Top 830
EXAMPLE 40
OF CODE LIST
COMPILATION
200
10 20 30 40 50 60 70
120 122
600 600 1300 700 600 600 600 600
3100
630
170
2500
210 180
830
80
90 100 110
123
20 900 600 20 20 622 1550