Академический Документы
Профессиональный Документы
Культура Документы
The LEEA Foundation Course is a pre-requisite training course that must be achieved before progressing to the LEEA Advanced
Programmes. The LEEA Foundation Course is NOT a qualification.
The LEEA Advanced Programme is a specialist training course for your chosen subject. The Advanced Programmes can be taken in
any order, and employees of our LEEA Full and Development Members are entitled to a TEAM Card in the category of “Test and
Examine”, this will list all qualifications achieved.
Bespoke training courses are designed as supplementary training courses that complement the Advanced Programmes. Delegates
that successfully complete the training courses will be awarded a LEEA certificate.
Methods of Training
E-Learning is available via our LEEA Academy for all LEEA Courses except for Mobile Crane Examination.
Instructor-Led Training courses can be delivered UK wide or internationally at the members’ premises, or at our purpose-built
training centre in LEEA Huntingdon. Courses include the LEEA Foundation Course, bespoke training and Advanced Programmes.
Blended Learning a course will be studied via the e-learning platform in the LEEA Academy followed by 1 or 2-day session including
final examination which will be delivered by a LEEA Training Specialist at the Huntingdon Training Centre or at your chosen location.
This option is available to members with multiple delegates wishing to study in advance of the 1 or 2-day re-cap and assessment
session. Prices are available upon request.
FOU - The LEEA Foundation Course
The course is structured to take place over a 3-day period and includes all equipment in the syllabus scope for the LEEA Advanced
Programme courses (the final assessment for the course is on day 3).
This foundation course does not offer a LEEA qualification for inspection or examination of lifting equipment but must be completed
before a delegate can undertake the Advanced Programme courses.
Course Syllabus:
Legislation Textile Webbing Slings
Standards & Codes of Practice Textile Roundslings
Materials Components for slings
Basic Heat Treatment Shackles and eyebolts
Units of Measure Turnbuckles
Basic Force, Stress and Strain Manual chain hoists
Basic Mechanics of Simple Machines Lever hoists
Methods of Manufacture Jaw winches
Verification of Lifting Equipment Jacks
Wire Rope & Wire Rope Slings Crane forks and C Hooks
Chain & Chain Slings Powered Lifting Machines
Rating and Marking of Lifting Runways and Crane Structures
Equipment Overhead Travelling Cranes
Textile Slings - Fibre Rope & Fibre Rope Offshore Containers
Slings
Mobile Cranes
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning.
LEG - Lifting Equipment General Advanced Programme
The course is structured to take place over a 5-day period where the delegates will benefit from hands-on practical training to
complement the essential theory sessions. The Advanced Programme is based on lifting accessories and includes thorough examination
procedures and criteria for continued periods of service.
Course Syllabus:
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning.
LMM - Lifting Machines Manual Advanced Programme
The course is structured to take place over a 5-day period where the delegates will benefit from hands-on practical training to
complement the essential theory sessions. The Advanced Programme is based on manually operated lifting machines and includes
thorough examination procedures and criteria for continued periods of service.
Course Syllabus:
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning.
LMP - Lifting Machines Power Advanced Programme
The course is structured to take place over a 5-day period where delegates will benefit from hands-on practical training to complement
the essential theory sessions. The Advanced Programme is based on powered lifting machines and includes thorough examination
procedures and criteria for continued periods of service.
Course Syllabus:
The course is structured to take place over a 5-day period. The Advanced Programme is based on runway beams, jib and mobile gantry
cranes and structures, including thorough examination procedures and criteria for continued periods of service.
Course Syllabus:
Legislation Purpose built runways
Standards Cranes and components
Runways Beam clamps
Supporting Structures Mobile lifting gantries
Deflection and measurements Swing jib cranes
Runway beams with cantilevers Davits
Runway beam fixings – Bolted Examination and testing of slewing jib cranes
Welding of structural steel Power feed systems
Inspection and testing of welds Safety essentials – Working on RCS
Site examination and testing
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning.
OTC - Overhead Travelling Cranes Advanced Programme
The course is structured to take place over a 5-day period. The Advanced Programme focuses
on overhead, portal and semi-portal cranes and includes thorough examination procedures
and criteria for continued periods of service.
Course Syllabus:
Legislation Motion limit switches
Standards Overload devices
Lifting Media – Load chain Braking systems
Lifting Media – Load rope Electric motors and VFDs
Materials Duty classification
Crane construction Safety essentials – Working on OTCs
Crane configuration Testing as part of the Thorough Examination
End carriages The Thorough Examination
Hoist construction Gantry alignment
Rope drums and pulleys
Power feed systems
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning.
OCE - Offshore Containers Advanced Programme - (Design, Construction, Testing, Examination & Marking)
The course is structured to take place over a 5-day period and will provide theoretical training in relation to the current regulations,
standards and the requirements of persons carrying out testing, examination and marking of offshore containers with an overview of
design and construction requirements.
Course Syllabus:
Legislation Shackles
Standards and Codes of Practice Lifting Set Design
Terms and definitions Examination of Containers
Design and Construction Examination of Lifting Sets
Pad Eyes Testing of Containers
Marking Requirements and Data Plates Testing of Lifting Sets
Certification Inspection Report Requirements
Chain Slings Pre-Trip Inspections
Steel Wire Rope Slings
Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your
location in the UK and overseas) and blended learning
MCE – Mobile Crane Examination Advanced Programme
The course is structured to take place over a 7-day period and will provide theoretical and practical training in relation to the current
regulations, standards and the requirements of persons carrying out testing and examination of mobile cranes. Delegates will be required
to pass a practical assessment and a theoretical examination at the culmination of the training course.
Course Syllabus
Legislation Reasons for Thorough Assessment of Mobile Telescoping Cranes
Standards & COPs Basic Hydraulic Systems for Mobile Telescoping Cranes
Site Risk Assessment Thorough Assessment of Mobile Crane Chassis/Carrier
Reasons for Thorough Assessment Thorough Assessment of Mobile Telescoping Crane Superstructure
Types of Thorough Assessment and frequency Testing as part of the Thorough Assessment
Types of P.P.E. Rated Capacity Indicators (R.C.I.)
Inspection Equipment (for verification) Telescoping Booms
Types of Test Weights Fly Jibs & Luffing Jibs
Crane Types Limit Switches & Devices
Load Charts
Crane Signals
Wire Rope Assessment
Hook Blocks.
Reporting
Current availability: Instructor Led Training – On-site at your location in the UK and overseas (Contact LEEA for further details)
LEEA Huntingdon Training Centre Timetable (Jan – June 2020)
Price per
Course
Code Course Title Jan Feb Mar Apr May June delegate
Length
*(excluding VAT)
3rd – 5th
7th – 9th 4th – 6th 15th – 17th 12th – 14th
17th – 19th 9th – 11th
FOU LEEA Foundation Course 3 days 21st – 23rd 18th – 20th 28th – 30th 27th – 29th £435.00
31st – 2nd Apr
All delegates must be a minimum age of 18 when attending LEEA Training Courses.
Delegates with learning additional needs, e.g. Dyslexia, should inform our Training Administrator when making a course booking
and the Training Specialist at the start of the training course. All such information will be in held in strictest confidence.
The LEEA Foundation Course must be completed successfully prior to any Advanced Programmes.
The Advanced Programme training courses include a mixture of sessions in the classroom and workshop. Workshop sessions will
involve handling used equipment. Delegates should therefore be cleanly dressed and bring a suitable overall and safety footwear
for the practical sessions. Hand tools will be provided and it will be the responsibility of the delegate to ensure that all tools and
equipment are returned to their respective location at the end of the practical sessions.
Credit
Standard LEEA credit terms apply. All results, certificates and TEAM Cards (where applicable) will be sent to the company training
contact once payment in full has been received for the examination fees. Subject to annual subscription fees having been paid.
Cancellations
LEEA reserve the right to cancel courses if the number of delegates is insufficient for it to be viable to run a course. LEEA will not be
responsible for lost deposits or cancellation charges.
Substitutes
If a delegate becomes unavailable before the commencement of the course, a substitute may be nominated. Substitution once the
course has commenced is not accepted.
Hinchingbrooke Business Park is located at Spittals Interchange where the A14 turns west before crossing the A1. A Marriott Hotel is
clearly visible on the South West corner of the junction.
By rail
The nearest station is at Huntingdon and is on the main line North from London’s Kings Cross terminus. Taxis are available at the
station.
By road
From all directions, take the A14 West from the interchange roundabout keeping to the left-hand lane and IMMEDIATELY on leaving
the roundabout, there is a slip road to the Marriott Hotel and Business Park. Follow the road past the Hotel, the security barrier and
round to the right past the food factory. Osprey Court and the LEEA Training Centre is on the left.
LIFTING EQUIPMENT ENGINEERS ASSOCIATION - TRAINING COURSES BOOKING FORM Jan – June 2019
PLEASE NOTE THAT LEEA MEMBERS MUST ONLY NOMINATE THEIR OWN EMPLOYEES FOR ANY LEEA TRAINING - IF LEEA DISCOVER
THAT NON-EMPLOYEES ARE IN ATTENDANCE, THEY WILL NOT BE PERMITTED TO CONTINUE WITH THE TRAINING COURSE AND NO
CERTIFICATES WILL BE ISSUED
Trainee
Surname/Family Name:
First Name(s):
Date of Birth (dd/mm/yyyy): / /
(Must be provided)
Company
Name (and branch if applicable):
Address:
Training Contact:
Contact phone number:
Contact email address:
Purchase Order number (PO):
Learning difficulties:
Does your delegate have additional learning needs, e.g. Dyslexia, if yes, please tick the box and provide
details when submitting the form, this information will be held in strictest confidence:
Check the box(s) for the course(s) you would like to attend
Place
Title Course Name
Required
FOU LEEA Foundation Course
LEG Lifting Equipment General Advanced Programme
LMM Lifting Machines Manual Advanced Programme
LMP Lifting Machines Power Advanced Programme
RCS Runways and Crane Structures Advanced Programme
OTC Overhead Travelling Cranes Advanced Programme
OCE Offshore Containers Examination Advanced Programme
For Maestro and Solo cards, the issue number or start date:
Cardholder’s signature:
Please complete the above application then print, sign & scan the form before forwarding a copy to:
academysupport@leeaint.com.
Huntingdon Training Centre