Академический Документы
Профессиональный Документы
Культура Документы
only!
Article no.: 97787
Description
Smoke control dampers are designed for mechanical or natural smoke and heat extract systems. Its function is to extract toxic gases, smoke
and fire or provide a supply of fresh air to fire compartments. Smoke control dampers are fitted with an actuator without a spring; therefore
they have two safety positions, “open” and “closed” and require power even in the event of fire.
Highlights
• AA – automatic activation (sets the safety position within 60 seconds). No thermal insulation around the actuator needed.
• Multi – usage in compartments classified as “multi” Can be used also in compartments classified as "single"
• Pressure level 3 (-1500 Pa … 500 Pa)
• Casing leakage according to EN 1751, class C
• Blade leakage according to EN 1751, class 3
• Lightweight sheet metal construction
Fire Resistivity
S-SA2 and S-SA2L smoke dampers are CE certified according to EN 12101-8:2011. Tested according to EN 1366–10:2011 + A1:2017 and
classified according to EN 13501-4:2016. The smoke damper together with its installation form an inseparable part of the fire resistivity rating
Product Types
• S-SA2: Wall Mounted Smoke Control Damper - AAmulti Rectangular smoke control damper without mesh for installations in the wall and
ceiling between single & multi and multi & multi compartments
• S-SA2L: Duct Mounted Smoke Control Damper - AAmulti Rectangular smoke control damper with a silicone gasket and mesh -fitted
extension for blade overhangs. Suited for installations on the vertical and horizontal multi compartment ducts.
Design
S-SA2 and S-SA2L has a galvanized sheet metal casing. The damper blade is made of calcium silicate boards. The closed damper is sealed by
an active intumescent sealing to avoid the spread of heat and smoke. Flanges are used for the connection of the damper to a duct. S-SA2L has
an additional frame of calcium silicate board on the casing in the blade area and a duct extension fitted with galvanized sheet metal mesh.
Material Composition
• S-SA2 The product contains galvanized sheet metal, calcium silicate board, fireproof carbon fiberglass, polyurethane foam and ethylene-
propylene rubber. These are processed in accordance with local regulations. The product contains no hazardous substances.
1 /6
S-SA2L-1000x350-B24 - WORK VERSION: For internal use
only!
Article no.: 97787
• S-SA2L The product contains galvanized sheet metal, calcium silicate board, fireproof carbon fiberglass, polyurethane foam, Silicone blade
gasket and ethylene-propylene rubber. These are processed in accordance with local regulations. The product contains no hazardous
substances.
List of Accessories
Detailed information about accessories for S-SA2 and S-SA2L is available from page 13
• D1-S-SA2: Duct Extension with Mesh for S-SA2
• K1-S-SA2L: Kit for Sheet-Metal Duct Installation
2 /6
S-SA2L-1000x350-B24 - WORK VERSION: For internal use
only!
Article no.: 97787
Associated products
DKIR1
DKIS1
S-SA2
3 /6
S-SA2L-1000x350-B24 - WORK VERSION: For internal use
only!
Article no.: 97787
Calculation
11
10 55 dB(A)
8
50 dB(A)
6
45 dB(A)
40 dB(A)
4
35 dB(A)
30 dB(A)
2 25 dB(A)
8100
Parameter Value
Air flow 8100 m³/h
Air velocity 9.3 m/s
Pressure drop 11 Pa
Total sound power level - Discharged into room 61 dB
Total sound power level (A-weighted) - Discharged into room 56 dB(A)
Communication data 2x(NO/NC, pot. free)
4 /6
S-SA2L-1000x350-B24 - WORK VERSION: For internal use
only!
Article no.: 97787
Configuration
Parameter Value
Width 1000
Height 350
Activation Type B24 (AC/DC 24 V Belimo Actuator)
Accessories Not selected
Fire resistance Not selected
5 /6
S-SA2L-1000x350-B24 - WORK VERSION: For internal use
only!
Article no.: 97787
Configuration
Parameter Value
Width 1000
Height 350
Activation Type B24 (AC/DC 24 V Belimo Actuator)
Accessories Not selected
Fire resistance Not selected
6 /6