Академический Документы
Профессиональный Документы
Культура Документы
Description: Some AUX phone’s will not ring on a incoming call. And some fax’s will not “go
off hook” / answer a incoming call.
Action: In order to increase the ringing voltage the transistor Q 1909 has to be removed and a link
between the -44 VDC and the -24 VDC has to be made. Fig. 4. ( Q1909 ).
This will cause the voltage to increase to -44 VDC.
In order for the SLIC circuit to handle the increase in voltage, the transistors has to be replaced.
Fig. 3. ( Q1901, Q1902, Q1903, Q1905, Q1906, Q1907 ).
Q1909
In order to increase the ringing voltage remove Q1909, and make a link between
the -44 VDC and the -24 VDC.
fig. 1
In order for the SLIC circuit to handle the increased voltage, replace the transistors,
according to the below diagram.
fig. 2.
PCB layout.
Fig. 3.
Q1901
Q1906 Q1905
Q1902
Q1905
Q1907
PCB layout.
Fig. 4.
J5 - AUX
U518
U512
fig. 5.
Check if Q1909 has been removed and link has been made.
Se below fig. 6.
fig. 6.
U190