Академический Документы
Профессиональный Документы
Культура Документы
html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
( / News (https://www.steeljrv.com )
sales@steeljrv.com (mailto:sales@steeljrv.com)
/ Get ourhttps://www.steeljrv.com
quotation in 24 hours )
Search...
Popular
MSS-SP43 (A) ASTM A815 SAF2507 Lap Joint Stub End 3 Inch Sch80S (https://www.steeljrv.com/mss-sp43-
a-astm-a815-saf2507-lap-joint-stub-end-3-inch-sch80s.html)
ASME B36.19 ASTM A213 TP347 SMLS Pipe 6" Cold Finished 168.3 x 4.2 x 8000MM
(https://www.steeljrv.com/asme-b36-19-astm-a213-tp347-smls-pipe-6-cold-finished-168-3-x-4-2-
x-8000mm.html)
ASME B16.5 ASTM B366 Nickel Alloy 200/201 Seamless Concentric Reducer
Send4 us
Select Language Inch - 1-1/2 Inch SCH80
a message
1 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Steeljrv.com
www.steeljrv.com supplies Steel Pipes (https://www.steeljrv.com/products/pipes), Valves
(https://www.steeljrv.com/products/valves), Flanges (https://www.steeljrv.com/products/flanges), Pipe
Fittings (https://www.steeljrv.com/products/pipe-fittings). Focus On Quality, Offer Best Products.
2 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
The other piece of a Lap Joint Flange is the backing flange. This flange has all the same common
dimensions (O.D., bolt circle, bolt hole size, etc.) as any other flange however it does not have a raised
face. One side, the backside, has a slight shoulder that is square cut at the center or pipe hole. The front
side has flat face and at the center hole an outside fillet to match the fillet of the “Stub-end” piece. The
flange part of the Lap-joint flange assembly is slipped on to the stub-end prior to the sleeve being welded
to the adjoining pipe or fitting. The flange itself is not welded or fixed in any way. It is free to spin for proper
alignment with what ever it is joining to.
The “Stub-end” can normally be purchased in two lengths. There is a short version, about 3″ long and a
long version of about 6″ long. It is prudent for the piping designer to know which version is in the piping
specification.
Because of it’s two piece configuration, the Lap Joint Flange offers a way to cut cost or simplify work. The
cost saving comes when the piping system (https://www.steeljrv.com/customized-piping-
system.html) requires a high cost alloy for all “wetted” parts to reduce corrosion. The sleeve or Stub-end
can be the required higher cost alloy but the flange can be the lower cost forged carbon steel.
The lap joint flange can be rotated which can be useful when fixing issues with bolt hole alignment. When
designing a piping system, lap joint flanges should not be considered solely to alleviate poor alignment
during construction. Good design practice should not need to include poor construction quality. However, if
the piping needs to be frequently dismantled for inspection or cleaning, consideration should be made for
lap joint flanges. They give the ability to swivel flanges and to align bolt holes which simplifies the
assembly of large diameter or unusually stiff piping.
Lap joint flanges are usually used in low pressure applications and are not suitable when there are high
loads on the flange pair. Some types of piping require the use of lap joint flanges. For example, metallic
pipe that has been plastic lining may have lap joint flanges.
Using lap joint flanges might be an option for saving Select
costs when theSend
Languagepiping
usisamade of exotic materials. By
message
3 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
/HOW-TO-GET-HIGH-QUALITY-LAP-JOINT-FLANGES.HTML)S (HTTPS://WWW.STEELJRV.COM/HOW-
TO-GET-HIGH-QUALITY-LAP-JOINT-FLANGES.HTML)
4 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
5 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
6 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
7 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
≤ 24 = 1.6 mm ≤ 10 = ± 0.8 mm
> 24 = ± 3.2 mm ≥ 12 = + 1.6 mm / – 0 mm
Select Language
Send us a message
8 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Select Language
Send us a message
9 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Slip-on flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated
applications.
10 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
ASME/ANSI B16.5,
MSS SP 44
CSA Z245.12
EN1092-1,EN1759-1.
DIN2573,DIN2576.
BS1560,BS 4504,BS 10.
AFNOR NF E29-200-1
ISO7005-1
AS2129
JIS B2220
UNI 2276. UNI 2277.UNI 2278 .UNI 6089 .UNI 6090
Select Language
Send us a message
11 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
For many users, slip on flanges continue to be preferred to welding neck flanges because of the following
reasons:
Key Features:
12 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
13 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Slip-On (SO) Flanges are preferred by some contractors, over the Weld-neck, because of the lower initial
cost. However, this may be offset by the added cost of the two fillet welds required for proper installation.
The strength of the slip-on flange is ample for it’s rating, but its life under fatigue conditions is considered
to be only one-third that of the weld-neck flange.
The slip-on flange may be attached to the end of a piece of pipe or to one or more ends of a pipe fitting.
The slip-on flange is positioned so the inserted end of the pipe or fitting is set back or short of the flange
face by the thickness of the pipe wall plus 1/8 of an inch. This allows for a fillet weld inside the SO flange
equal to the thickness of the pipe wall without doing any damage to the flange face. The back or outside of
the flange is also welded with a fillet weld.
A variation of the Slip-On flange also exists. This is the Slip-On Reducing Flange. This is simply a larger
(say a 14″) Slip-On flange blank that, instead of the Center (pipe) hole being cut out (or drilled out) for 14″
pipe it is cut out for a 6″ (or some other size) pipe. The SO Reducing flange is basically used for reducing
the line size where space limitations will not allow the length of a weld neck flange and reducer
combination. The use of the Slip-On Reducing Flange should only be used where the flow direction is from
the smaller size into the larger size.
A Lap Joint Flange is a two piece device that is much like a weld-neck flange but also like a loose slip-on
flange. One piece is a sleeve called a ‘Stub-end” and is shaped like a short piece of pipe with a weld bevel
on one end and a narrow shoulder on the other end called the hub. The hub is the same outside diameter
as the raised face (gasket contact surface) of a weld neck flange. The thickness of the hub is normally
about ¼” to 3/8″. The back face of the hub has a rounded transition (or inside fillet) that joins the hub to the
sleeve.
The other piece of a Lap Joint Flange is the backing flange. This flange has all the same common
Select Language Send us a message
14 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
(Yaang (https://www.yaang.com/) Pipe Industry is a leading manufacturer and supplier of nickel alloy and
stainless steel products, including Super Duplex Stainless Steel Flanges, Stainless Steel Flanges,
Stainless Steel Pipe Fittings, Stainless Steel Pipe. Yaang products are widely used in Shipbuilding,
Nuclear power, Marine engineering, Petroleum, Chemical, Mining, Sewage treatment, Natural gas and
Pressure vessels and other industries.)
If you want to have more information about the article or you want to share your opinion with us, contact us
at sales@steeljrv.com (mailto:sales@steeljrv.com)
Please notice that you might be interested in the other technical articles we’ve published:
References:
Select Language
Send us a message
15 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
Related News
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Pipes (https://www.steeljrv.com/products/pipes)
Pipe fittings (https://www.steeljrv.com/products/pipe-fittings)
Flanges (https://www.steeljrv.com/products/flanges)
Valves (https://www.steeljrv.com/products/valves)
About Us
About Us (https://www.steeljrv.com/?page_id=2)
Contact Us (https://www.steeljrv.com/?page_id=38)
Products (https://www.steeljrv.com/?cat=1)
Project (https://www.steeljrv.com/?cat=60)
Contact Us
Address: Longwan District, Wenzhou, Zhejiang, P.R. China.
Phone: +0086-18267732328
Follow Us
Skype: Skaifox (skype:skaifox?chat)
Copyright © Yaang Pipe Industry (https://www.steeljrv.com) Co., Limited All Rights Reserved
Links: Flange Manufacturer (https://www.yaang.com) | Pipe Fitting Manufacturer (https://www.yaang.com) | Steel Pipe
Manufacturer (https://www.yaang.com) | Stainless Steel Tube Manufacturer (https://www.yaang.com) | Stainless Steel Pipe
Manufacturer (https://www.yaang.com)
Select Language
Send us a message
16 of 17 16-10-2019, 20:49
Lap Joint Flange VS Slip On Flanges - www.steeljrv.com https://www.steeljrv.com/lap-joint-flange-vs-slip-on-flanges.html
(/)
+86-18267732328 (tel:+86-18267732328)
Get in touch with us
sales@steeljrv.com (mailto:sales@steeljrv.com)
Get our quotation in 24 hours
Select Language
Send us a message
17 of 17 16-10-2019, 20:49