Академический Документы
Профессиональный Документы
Культура Документы
QCX® FLA100
PRODUCT DATASHEET
WE DISCOVER POTENTIAL
Fast, reliable analysis
How it works Specification
Free lime analysis using the Automatic Free Lime Analyser
Sample material Clinker and lime, dry, non-sticky,
is based on the dissolution of Ca2+ in hot ethylene glycol max. 5 % residue on a 100 micron sieve
where the Ca2+ concentration is determined by a conductivity
Sample quantity Min. 10 cm3
measurement.
Sample frequency 4 samples / hour
The unit comprises a dosing device, a balance system with
Dedusting 0.5 m3 / min, -16 to -31 kPa
analytic temperature stabilised head, and a pumping system
with heated reservoir for ethylene glycol – all of which are Glycol 99.0 – 99.5 % purity
housed in a cabinet suited to any industrial environment. Consumption of glycol Approx. 60 ml / cycle
Sample input can be automatic or manual, with the Automatic Measuring range 0 – 99 % of free CaO
Free Lime Analyser having a measuring capacity of four Analysed sample mass 0.5 – 1.5 g
samples per hour. Std. error of calibration < 1 % (absolute free CaO concentration)
It can be used standalone for manual operation or installed Repeatability 1 sigma < 3 % relative
in automated operations.
Contamination Between consecutive samples < 3 % relative
Denmark Copyright © 2019 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered)
Tel. +45 36 18 10 00 trademark of FLSmidth A/S. This brochure makes no offers, representations or
Fax +45 36 30 18 20 warranties (express or implied), and information and data contained in this brochure
info@flsmidth.com are for general reference only and may change at any time.