Академический Документы
Профессиональный Документы
Культура Документы
This product has been manufactured to comply with international safety standards.
Please read the following safety precautions carefully.
2. OVER LOADING
• Do not overload a wall outlet, extension cord or adapter as this may result in electronic fire or shock
3. LIQUIDS
• The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid
should be placed on the product.
4. VENTILATION
• The slots on rear of the product must be left uncovered to allow proper airflow into the unit.
• Do not stack electronic equipments on top of the product.
5. ATTACHMENTS
• Do not use any unsupported attachments as these may be hazardous or cause damage to the
product.
6. CONNECTION TO THE TV
• Disconnect the product from the mains before connecting or disconnecting the cable from the TV.
Failure to do so can damage the TV.
7. LOCATION
• Place the product indoors to avoid exposing it to lightning, rain or sun. Do not place it near a
radiator or heat register.
8. REPLACEMENTS OF PARTS
• When replacement of parts is required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitution may result in additional damage to the unit.
CAUTION
Back up your system periodically to avoid any potential data loss. NOVATRON
disclaims any responsibility of all sorts of data loss or recovery
CONTENTS
1 Before using the product 4
1.1 Package Contents 4
1.2 Top and Front Panel 5
1.3 Rear Panel 6
1.4 Remote Control 7
2 Connections 10
3 Basic Operation 12
6 File Manager 23
7 Network Setup 25
8 Setup 31
9 Firmware Update 38
11 Appendix 41
11.2 Specification 42
1. Before using this product
This chapter provides detailed instructions on the product and its accessories.
NOTE
Product contents may be subject to change.
Cables not specified above must be purchased separately.
-4-
1.2 Top and Front Panel
1. SETUP
Press go to SETUP Menu
2. STOP
Press to stop playing of a file
3. NAVIGATION
Press to go to next step or return to
the previous step
4. PLAY
Press to play the selected file.
5. OK
Press to select a desired item
1. POWER BUTTON
Switches the product on/off.
2. TV OUT BUTTON
changes the TV OUT mode without remote control
3. LED
Indicates TV OUT mode which is currently selected.
4. Infrared receiver
Receives signals from the remote control. Make sure that the path between remote
control and IR is unobstructed.
5. 2” TFT-LCD display
Displays the simple information about system configuration,
5
1.3 Rear Panel
1. DC12V
6. OPTICAL Out
7. HDMI Out
8. LAN(Ethernet 100Base-Tx/10Base-T)
11. FAN
13. AV-IN
6
1.4 Remote Control
4. REC.
6. SETUP
Press the button to go directly to SETUP Menu
7. Number button
8.
-. Press the button to move to next or previous file
7
9. MUTE Mute the audio temporarily.
11. PLAY/PAUSE
MANAGER/SETUP.
user’s action.
16. REW / FF
17. RETURN
recording.
Guide.
20. MEDIA
menu
8
21. EJECT Safely remove attached storage
24. SLOW
Press the button to change the playback speed into the slow motion
mode.
25. A - B
Press the button to set the beginning and end points of a section to
repeat
26. SHUFFLE
27. ZOOM
Press the button to zoom in/out the screen during watching a file.
30. SLEEP Press the button to set the timing to turn the product off
automatically.
34. SYNC Press the button to synchronize the video and subtitle
9
2. Connections
2. Connect the ANTENNA-OUT of the product and the aerial input of the TV using an
RF cable (Line ⑫)
(Line ④)
- 10 -
Use the composite or SCART cable when connecting to a DVD player and other
• Connect the product and the audio system by using a RCA cable(Line ⑨)
• Connect the product and the audio system by using a optical cable(Line ⑪)
• Connect the product and the audio system by using a HDMI cable(Line ⑬)
2.6 Connecting a PC
Use USB cable to connect a PC(Line ①)
- 11 -
Connect the USB devices (Line ⑧)
3. Basic Operation
3.1 Browser Menu
Home screen menu is displayed when your press HOME on the remote control. The
icons on the Browser menu (default) let you to browse your media library.
The Movies, Music and Photo icons represent files for the different media types. “All”
icon will display available media files in the current folder.
- 12 -
the file and then press OK.
• Repeat – The current video is played repeatedly until you press STOP
• All – All the files in the current video folder are played in sequence, and
- 13 -
• Select Music icon by pressing MEDIA on
- 14 -
1. During music playback, press SHUFFLE.
The option opens at the top of screen.
2. Press repeatedly until the shuffle mode you
want is displayed. Options include :
• Shuffle
• Repeat
• All
• Once
control.
Photo Slideshow
This player allows you to create a slideshow using the contents of a photo folder.
To start a slide show:
1. Select the photo folder containing the image files you want in the slide show.
2. Highlight the image files in the current folder, then press PLAY/PAUSE to start the
slideshow
- 15 -
To listen to background music with a slideshow:
1. Select the audio files you want to accompany the slide show
2. Copy them into the photo folder you want in the slide show
To listen to background music with a slideshow, the audio files and pictures must be
included in the same folder.
Repeating a Slideshow
Use this option to set the slideshow to play in a loop sequence.
To set the slide show repeat mode:
During the slideshow, press REPEAT/SHUFFLE, then press this button repeatedly until
the repeat mode you want is displayed. Options include:
• Change status to repeat: The slideshow is played repeatedly until you press STOP
- 16 -
• Image file name
- 17 -
4. You can delete the unwanted channels
from the found channels.
NOTE
If you exit the installation without fully completing the channel searching procedure, you
may not have all of the channels available. In this case, you can use channel scan menu
to search for the channels.
- 18 -
3. Enter the channel to search. When
entering channel value, the appropriate
frequency value is displayed.
5. Recording
The product provides various recording modes such as instant recording and scheduled
recording. It supports standard DTV features such as EPG (Electronic Program Guide) and
Time shifting.
5.1 Instant Recording
The instant recording function records the
channel displayed currently.
1. Press the REC button to record current
channel instantly.
2. Press the REC button repeatedly until the
recording duration you want is displayed.
Options includes :
• REC OFF
- 19 -
3. Press button to see the detailed
information about the recorded program.
current channel.
5. If you move to other channel, stops instant
recording. Do not switch channels while
recording using this function.
Note :
• Ensure that there is enough free space before recording. If the free space on the hard
disk drive is insufficient, recording will stop. Recording one hour of program may require
up to 2 or 3GB of hard disk space.
• The first partition of the local hard disk drive must be formatted in NTFS.
- 20 -
3. The box like the left figure will be shown.
Set the Type, Date, Duration, Cycle,
Quality by using , , , .
4. The following message will be shown.
Select “Yes” to save the changes.
- 21 -
① Service list
• Shows the list of all services currently available. As you press button, the rows in
the event name list will be refreshed correspondingly.
• Shows the names of current events in a grid of rows and columns. You can check
scheduled event information up to several days ahead, depending on conditions.
④ Picture window
⑤ Event name
- 22 -
• Press to scroll up the event name list
Note :
• The program being recorded will be added to the recorded program list
• The start time of scheduled recording cannot be set within the duration of scheduled
- 23 -
1. Move to Delete icon.
Note: If the status of reserved program is set to Lock, you cannot delete the program.
- 24 -
Note: Time shift makes the time gap between the broadcasting (live) point and watching point.
Press the STOP button to go to the live program.
- 25 -
6. File Manager
This section describes how to copy, move or delete the files or folders from one storage
device to another one.
• Select “want to create New Folder?” to create a new folder into the destination storage.
- 26 -
6.2 Delete
1. Press HOME and select File Manger icon.
- 27 -
7. Network Setup
This chapter will guide you through the network settings such as wired, wireless and FTP.
- 28 -
7.2 Wireless Setup(Optional)
This section allows you to make changes to the wireless network settings.
- 29 -
7.3 Browsing on the network
This section describes how to playback the multimedia files shared on the local area
network (Ethernet or WLAN). Make sure that this player is connected on the network.
1. Press HOME and select Browser icon.
This icon on this screen lets you browse
your media library.
2. Select Network icon and press OK.
3. Workgroup lists will be displayed on your
network. Locate the workgroup and all the
shared files and folders available will be
displayed on the screen.
NOTE
needed.
- 30 -
the network connection and size of shared
media files
- 31 -
When you press i-Radio on remote control,
it will display the station lists in the Internet
Radio folder you create.
NOTE:
• The radio station needs to be saved as M3U or PLS format to include streaming URL.
- 32 -
6. Enter NEW Password using / / /
button and then press OK.
To use FTP service, make sure FTP client program is installed on your PC. You can
download legal FTP client software (e.g. FileZilla) and install it on your PC. The following
explains how to use FTP service by using FileZilla software
- 33 -
** NOTE **
1. It is needed to limit the maximum
number of connections for a single
account for the proper operation.
- 34 -
8. Setup
This chapter describes how to set up the TV, video, audio, recording and system. You can
set the options such as the parental control, time setting and firmware upgrade.
8. 1 TV
8.1.1 DTV Region
Use this option to select your country or
location.
MANUAL
Manually add a new carrier by entering the
desired carrier number or frequency band
- 35 -
8.1.3 Channel Set
You can delete the unwanted channels from
the searched channels.
8.2 Audio
8.2.1 Night Mode
comfort option
- 36 -
◆ Optical LPCM Use with an optical
8.3 Video
8.3.1 Aspect Ratio
• Letter Box
• 16 : 9
8.3.2 Brightness
8.3.3 Contrast
- 37 -
You can use the on-screen menu to change
the contrast according to personal preference.
Adjust the Contrast by pressing / .
8.3.4 TV Out
8.4 REC
8.4.1 Quality
- 38 -
EP 2.5Mbps 325 x 576 352 x 480
SLP 1.7Mbps 325 x 576 352 x 480
8.5 Network
This option allows you to set the network setting. For more details, please go to Chapter 7.
8.6 System
8.6.1 OSD Language
- 39 -
Select this option to set the current time.
Manual
Select Manual.
Auto
NOTE
The default password is 0000. If you have
forgotten your password, please contact your
local distributor.
- 40 -
1) Lock System
2) Change Password
3) TV Rating
8.7 Photo
8.7.1 Slide Show Timing
- 41 -
Use this option to select the method to
display the next slide in a slideshow.
9. Firmware Update
In order to maintain proper performance of the product, it is essential to have the most up-to-date
software.
Important: Make sure AC power adapter remains connected during the firmware
update. A power disruption during the update process can corrupt the system firmware.
If the power is off during firmware update, fatal damage may be caused to the product.
9.1 Updating firmware from HDD
Copy the latest firmware file (install.img) on the root directory of the hard disk drive.
Press HOME and select Setup icon, and
then press OK.
Move to System icon, and then select
Firmware Update option. Highlight
SystemUpgrade and press OK. This will
restart the system.
⑤ Once the update process is completed, the player will start again. Once the player
- 42 -
Press HOME and select Setup icon, and
then press OK.
Note:
• Other functions will not activate while firmware update takes place
1. Under Windows 2000/XP/Vista, you can make a partition and format the hard disk by
using the Disk Manager Utility.
- 43 -
4. When the New Partition Wizard appears,
press Next.
- 44 -
7. Click Next.
11. Appendix
11.1 Trouble Shooting
If the product does not work properly after checking it, please contact your local dealer.
Don’t open the product. It may result in a dangerous electric shock and will invalidate your
warranty.
- 45 -
The display on front panel The main power cable is Check that the main power
does not light up. not connected cable is plugged into the wall
outlet.
Wrong connection of the Connect the audio/video
audio/video output of the output of the product to TV
No picture, no sound. product to TV. correctly.
No or Bad signal message Connect the antenna cable
appears correctly.
The remote control unit does No batteries. Change the batteries (both).
not work. The remote control unit is Aim the remote control unit
incorrectly aimed. properly to the product.
Bad picture or noisy sound Bad reception of the Make sure the antenna is
in the TV mode. signal. clean and correctly adjusted.
Time shift does not work Wrong file format Make sure that the first
partition of the local drive is
formatted to NTFS
Does not recognize the hard The hard disk is not Make sure that the hard disk
disk correctly partitioned and has been correctly partitioned
formatted and formatted.
11.2 Specification
Chipset & Tuner
Chipset Realtek RTD1283DD 400MHz
Tuner DVB-T HD (Analog TV is not supported)
Recording
Video Format MPEG2 main profile, MPEG4 high profile
Audio Format MPEG1 Layer 2 (Stereo)
TS(Transfer Stream), HQ(720x576i, 8Mbps/48KHz, 256Kbps), SP, LP, EP,
Mode
S-LP
- 46 -
Method Time Shift, Instant Recording, Scheduled Recording by manual
Scheduled Recording with EPG (for Digital TV)
Decoding(Playback)
Video Format MKV, RM, RMVB, MOV, FLV, MP4, ASF, WMV, AVI, M2TS, DAT, MPG
MPEG, M4V, ISO, IFO, VOB, TS, TP, TRP
Codec H.264, MPEG1/2/4, VCD, SVCD, WMV9, RealVideo8/9/10(Up to 1280 x 720)
M-JPEG(640x480x30p, 840x480x10p), Resolution up to 1920 x 1080p
Audio Format AAC, AC3, DTS, FLAC, M3U, OGG, RA, RM, MP3, WAV
Codec Dolby Digital Pus, Dolby Digital AC3 and DTS, LPCM, ADPCM, RA-cook
Subtitle SMI, SUB, IDX+SUB, SRT, SSA , ASS, DVD subtitle, Embedded in AVI
*** Although this player supports the listed formats, it might not be able to
support every codec used to create the files.
A/V & Data In/Out
Video-In Euro SCART, COMPOSITE
Viedo-Out HDMI 1.3, Component(Y Pb Pr), Composite(RCA)
LAN Ethernet(100Base-Tx/10Base-T)
Wireless LAN(802.11n) : USB Dongle Type (Optional)
English, French, German, Italian, Spanish, Russian, Portuguese, Swedish,
OSD Language Turkish, Greek, Arabic, Czech, Danish, Dutch, Finnish, Polish, Romanian,
Hebrew
Physical Dimension 180 mm(W) x 140mm(D) x 70 mm(H)
AC/DC Adapter Input : AC100V ~ 240V 50/60Hz 1,5 A Output : DC12V 3.0A
* Specification may be changed without any notification
- 47 -