Академический Документы
Профессиональный Документы
Культура Документы
Pantalla anterior
Pruebas y Ajustes
236B, 246B, 252B and 262B Skid Steer Loaders Hydraulic System
Número de medio -RENR4867-03 Fecha de publicación -01/11/2009 Fecha de actualización -24/11/2009
i02699417
Machine Preparation
SMCS - 4350-035; 5050-035
1. Move the machine to a smooth horizontal location. Move the machine away from other
machines and personnel. Lower the bucket to the ground. Stop the engine.
3. Block the front tires and the rear tires of the machine.
4. Place a barrier around the machine in order to keep personnel away from rotating machinery.
5. Release the system pressure before attempting any adjustment. Refer to Testing and Adjusting,
"Hydraulic System Pressure - Release" for the proper procedure.
When any test is performed on the hydraulic system, the hydraulic oil must be at an operating
temperature of 45° ± 5°C (113° ± 9°F). This temperature range is specified for the standard filled oil
at the factory. Use the 164-3310 Infrared Thermometer or the equivalent to measure this temperature
at the canister for the hydraulic filter. To increase hydraulic system temperature, start the engine and
operate all hydraulic cylinders for at least five cycles. Move the work tool through the full range of
motion.
Visual checks and measurements are the first steps during troubleshooting. Refer to Testing and
Adjusting, "Visual Inspection". Next, perform the operational checks. Refer to Testing and Adjusting,
"Operational Checks". Finally, perform the required tests and adjustments on the machine.
Copyright 1993 - 2016 Caterpillar Inc. Fri Dec 09 2016 08:19:28 GMT-0500 (Hora est. Pacífico, Sudamérica)
Todos los derechos reservados.
Red privada para licenciados del SIS.