Академический Документы
Профессиональный Документы
Культура Документы
com
www.hafeleindia.com
NEW
ABOUT PIVOT DOOR SYSTEMS…
A pivot door is a frameless door that rotates around its vertical axis and can be opened to both the left and the right.
It is not only functional but also a very attractive solution without frames, mountings or slats.
Pivot doors are movable walls. In a closed position they are virtually invisible; in an open position they can
determine the space. It is precisely this that is the strength of the pivot door: it is a rotating part of a wall that can
influence space, functionality and perception.
The new pivot door system by Häfele has won the high-
profile German Design Award for Excellent Product
Design in the category: Building and Energy. In the
jury’s report, the German Design Council describes the
pivot door system as ‘a product design that is
convincing right down to the last detail and a
pioneering contribution to the international and German
design world’.
TABLE OF CONTENTS
• Features 4-5
• Application 6
• Bottom Pivot Hinge Systems – Types 7
• SystemOne 8 - 10
• System 3 11 - 13
• System 4 14 - 16
• Accessories 17 - 20
• Installation Details 21 - 24
• Ordering Information 25 - 28
FEATURES
1
3
4
CEILING PLATE
NOTHING IN THE
CEILING
TOP PIVOT
NOTHING IN THE
FLOOR
BOTTOM PIVOT
(SystemOne, System3, System4)
FLOOR PLATE
All the components are installed into the door. Just fix the Ceiling Plate and the Floor Plate into the ceiling and floor res pectively to conclude the
installation
CEILING
FLOOR
APPLICATION
Pivot Doors as Restaurant Internal Frame with Glass Pivot Steel Pivot Doors with Glass for
Pivot Doors as Bathroom Doors
Partition Doors Doors Private Homes
Marble Pivot Doors in Public Washrooms Pivot Doors as Conference Room Walls Pivot Doors as Classroom / Office Partition Walls
External Steel Pivot Doors as Entrance Doors Steel Framed Pivot Doors as Wide Exterior Doors Pivot Doors as Partitions
Pivot Doors as Cabinet Doors Pivot Doors as Acoustic Partition Walls Pivot Doors as Rotatable Walls
BOTTOM PIVOT HINGE SYSTEMS : TYPES
CLOSING CLOSING
System3 turns from each 45˚ in both System4 is self-closing from the
directions and stops in the desired maximum of 100˚ and -100˚ till 0˚
direction.
DAMPING
40 mm 40 mm 50 mm
1,000,000 cycles as per EN 1670 1,000,000 cycles as per EN 1670 5,00,000 cycles as per EN 1154
Standard Standard Standard
Note 1 : If the door is mounted on the edge (i.e. side mounted), the width of the door cannot exceed 1500 mm. Incase of System One and 3, wider door applications can be
achieved if the door has a centre mounting or an offset mounting. The maximum distance that can be left from the wall is case of centre or offset mounting is [X+(Door Width / 2),
where X is thickness of the door divided by 10 ].
SYSTEMONE : COMPONENTS
SYSTEM ONE BOTTOM PIVOT TOP PIVOT TYPES
FLOOR PLATE TYPES CEILING PLATE TYPES FASTENING & FIXING MATERIAL
3 4
Floor Plate Round Ceiling Plate Round Mounting Package (1. Allen wrench, 2. Fitting
template, 3. Fitting adhesive, 4. Adjustment spanner)
943.56.008 943.56.005
943.56.011
Floor Plate Invisible Ceiling Plate Invisible Fastening Screws (A. Screw 6 x 60 RVS – 2
pieces; B. Screw 4 x 50 RVS – 8 pieces )
943.56.010 943.56.006
High Weight
Bearing Capacity
Can be used in
doors upwards of
40 mm thick
• Minimum dimensions around the door for fitting: • Minimum distance from the pivot point to the side of the door:
91 mm.
• Below :
If the floor plate is surface mounted, the distance between the floor and • Minimum door thickness:
Bottom Pivot (Y) should be13 mm. In case of a concealed application, 40 mm
the floor plate can be fitted into the floor and hence (Y) should be 7 mm.
• Maximum door dimensions [Refer Note 2]:
• Door/closing side : Unrestricted up to a maximum weight of 500 kg.
Based on a flat floor with square side walls, the rule of thumb for
determining the pivot/closing side of the door (X) is to divide the door • Special doors:
thickness by 10. SystemOne is suitable for fire-resistant doors, soundproof doors, doors
with draught-excluding, windproof and waterproof profiles, and burglar-
• Above: resistant doors.
In the case of Ceiling Plate Round (943.56.005) the distance between the
ceiling and Top Pivot (Z) should be 10 mm. In the case of Ceiling Plate • Warranty:
Invisible (943.56.006) or Ceiling Plate compatible with the Top Pivot with 5 years
Cable Entry Pin (943.56.007), the distance between the ceiling and Top
Pivot (Z) should be 4 mm.
Note 2 : If the door is mounted on the edge (i.e. side mounted), the width of the door cannot exceed 1500 mm. Incase of SystemOne, wider door applications can be achieved if the
door has a centre mounting or an offset mounting. The maximum distance that can be left from the wall is case of centre or offset mounting is [X+(Door Width / 2), where X is
thickness of the door divided by 10 ].
SYSTEM 3 : COMPONENTS
[Refer note 3]
SYSTEM 3 BOTTOM PIVOT TOP PIVOT TYPES
FLOOR PLATE TYPES CEILING PLATE TYPES FASTENING & FIXING MATERIAL
3 4
Floor Plate Round Ceiling Plate Round Mounting Package (1. Allen wrench, 2. Fitting
template, 3. Fitting adhesive, 4. Adjustment spanner)
943.56.008 943.56.005
943.56.011
Floor Plate Invisible Ceiling Plate Invisible Fastening Screws (A. Screw 6 x 60 RVS – 2
pieces; B. Screw 4 x 50 RVS – 8 pieces )
943.56.010 943.56.006
Note 3: 1. Wider and heavier doors are possible, however the closing force will decrease 2. For doors installed in high rises and places at a higher altitude, we recommend you
to go for a one size higher machine, i.e. if the door weight is 60 Kg, then instead of selecting article number 931.40.013 you should select article number 931.40.014
SYSTEM 3 : SPECIFICATIONS
System3 can turn through 360˚ and is characterised by a hold position at 0˚, 90˚, 180˚ and 270˚. This means that the
spring-loaded door turns from each 45˚ in both directions and stops in the desired direction. The door needs only a little
force to start moving, then it continues to rotate by itself thanks to the patented spring construction. The precise damping
feature allows the door to come to rest in the hold position after two movements.
Nothing in the floor
or the ceiling
High Weight
Bearing Capacity
Can be used in
doors upwards of
40 mm thick
FLOOR PLATE TYPES CEILING PLATE TYPES FASTENING & FIXING MATERIAL
3 4
Floor Plate Round Ceiling Plate Round Mounting Package (1. Allen wrench, 2. Fitting
template, 3. Fitting adhesive, 4. Adjustment spanner)
943.56.008 943.56.005
943.56.011
Floor Plate Invisible Ceiling Plate Invisible Fastening Screws (A. Screw 6 x 60 RVS – 2
pieces; B. Screw 4 x 50 RVS – 8 pieces )
943.56.010 943.56.006
Can be used in
doors upwards of
40 mm thick
Note 5 : In case of System 4, the width of the door cannot exceed 1500 mm. System 4 can only be side mounted. Centre or offset mounting do not apply to this pivot hinge system.
ACCESSORIES
•
•
ACCESSORIES : TOP PIVOT
The Top Pivot is integrated into the top of the door and uses a pin/hole connection. The pin is fixed to the top pivot and
drops into the hole in the ceiling plate when turned. All the exposed parts of the Top and Bottom Pivot are made of
Stainless Steel Grade 316
Milling drawing and Dimensions around door for both Top Pivots
Note 6: In the case of Ceiling Plate Round (943.56.005) the distance between the ceiling and Top Pivot (Z)
should be 10 mm. In the case of Ceiling Plate Invisible (943.56.006) or Ceiling Plate compatible with the Top
Pivot with Cable Entry Pin (943.56.007), the distance between the ceiling and Top Pivot (Z) should be 4 mm.
ACCESSORIES : CEILING PLATE
Ceiling Plates, as the name suggests, are fitted into the ceiling. The pin of the top pivot then fits seamlessly into the hole of
the ceiling plate. All the Ceiling Plates in this range are made of Stainless Steel Grade 316.
Ceiling Plate - Compatible with Top Pivot with Cable Entry Pin 943.56.007
ACCESSORIES : FLOOR PLATE
Floor Plates, as the name suggest, come with an oval recess and are fitted to the floor. The base of the bottom pivot hinges
(SystemOne, 3 or 4) fit seamlessly into the recess of the floor plate. These floor plates can either be installed on the floor or
into the floor to achieve a concealed application. All the Floor Plates in this range are made of Stainless Steel Grade 316.
Start with the installation of the Floor Plate Place the Fitting Template in place after accounting for X,
which is thickness of the door divided by 10. Incase, if the
pivot is to be fixed in the centre, the maximum distance that
can be left from the wall is [X+(Door Width / 2)]
The position of the Ceiling Plate has to be exactly The drilling pattern will depend on the type of Floor Plate.
perpendicular to the Floor Plate to ensure perfect alignment Incase of Floor Plate Invisible and Floor Plate Outdoor
follow pattern A and incase of Floor Plate Round follow
pattern B
Apply the fitting adhesive to the Floor Plate Place the Floor Plate in its position
Screw 6 x 60 RVS
Screw 6 x 60 RVS
M5
Repeat the measuring process with the Fitting Template for * Needs to be ordered separately
the Ceiling Plate
INSTALLATION : SYSTEMONE, SYSTEM 3, SYSTEM 4
Repeat Step 4 but this time for Ceiling Plate. Incase of Apply the fitting adhesive to the Ceiling Plate
Ceiling Plate Invisible and Ceiling Plate follow pattern A and
incase of Ceiling Plate Round follow pattern B
Screw 6 x 60 RVS
Place the Ceiling Plate in place and fix it tightly in position Once the Floor Plate and Ceiling Plate are installed, you
with the provided screws can move over to installation of the Top and Bottom Pivots
Screw 4 x 50 RVS
Screw 4 x 50 RVS
Fix the Top Pivot into the door with the provided screws Fix the Bottom Pivot into the door with the provided screws
Note: The Pivot is in the open position while placing the Ensure that the Pivot fits seamlessly into the recess of the
door onto the Floor Plate for ease of assembly floor plate
INSTALLATION : SYSTEMONE, SYSTEM 3, SYSTEM 4
Use the Allen Wrench in the second hole from the top for Use the Allen Wrench in the first hole from the top for
mounting and locking the door. Turn right to lock / fit the perfect horizontal door alignment. Turn right to shift the
door and turn left to unlock/remove the door. door towards the right by 5 mm and turn left to turn the door
towards the left by 5 mm.
Only for System 3 and System 4
The door should be perfectly aligned to the wall The two bolts can be loosened if the hinge is set radially,
i.e. that the door is not perfectly aligned to the wall
By loosening the bolts completely, the door position can be Once adjusted, hold the door in position and tighten the
adjusted by 2.5˚ on either sides bolts
Only for System 4
SystemOne
931.40.012 SystemOne Pivot point ≤ 500kg 1
943.56.003 Top Pivot Ø10mm 1
SystemOne Complete Set with Accessories 943.56.005 1
943.56.000 Ceiling Plate Round Ø 80mm 52,432
Unrestricted up to a max. weight of 500 kg.
943.56.008 Floor Plate Round Ø 80mm 1
943.56.011 Mounting package 1
Note: The BOM Kits come with special packaging. All the components come packed together in a single box.
ORDERING INFORMATION : SYSTEMONE, SYSTEM 3, SYSTEM 4
Individual Components
New Delhi | Kolkata | Chennai | Hyderabad | Bangalore | Pune | Ahmedabad | Srilanka | Bangladesh | Nepal
Toll Free Customer Care No.:1800 266 6667, Red Carpet Helpline for Franchisees:4545 | SMS HAFELE to 56070
| customercare@hafeleindia.com
www.hafeleindia.com