Академический Документы
Профессиональный Документы
Культура Документы
5 - Examples page: 1
d means inserting of ‘d’ text in the program command line and pressing Enter,
LBM and RBM – shortcuts that mean respectively clicking the left button of mouse and the right
button of mouse.
In order to start session in Robot CAD (steel), press icon located on desktop or select
command RCAD – Steel from START menu. After a while AutoCAD© is launched, extended by the
options enabling the drawings production (extended menu, additional toolbar, dialog box Object
inspector etc.)
© RoboBAT
page: 2 RCAD Steel version 3.5 - Examples
Activate User-defined for option Selecting the option that makes possible definition of
Width (X) (there will appear symbol description of non-uniform division of workframe width.
)
Insert the following values: Defining the description parameters for width, closing the
W1, dialog box.
W6,
OK
© RoboBAT
RCAD Steel version 3.5 - Examples page: 3
For Length (Y) define the following Defining the description parameters for length.
parameters:
Prefix - L,
Start value - 1
Step - 1
For Height (Z) define the following Defining the description parameters for height.
parameters:
Prefix - H,
Start value - 1
Step - 1
By means of mouse define the Inserting the structural workframe (see picture below),
direction as parallel to X axis of opening the Workframe dialog box.
World UCS
© RoboBAT
page: 4 RCAD Steel version 3.5 - Examples
Activate Non-uniform for the option Selecting the option enabling the definition of non-uniform
Width (X) and Height (Z) (there will division of width and height of the workframe (compare with
appear symbol ) the drawing below).
© RoboBAT
RCAD Steel version 3.5 - Examples page: 5
In Spacing column the following Defining the location of the successive axes of distribution.
values are visible: Attention: Inscribing the coordinate (spacing) and going to
0, any edition field (or pressing OK) causes automatic
2500, calculation of the spacing (coordinate) value.
1900,
1200,
1900,
2500
© RoboBAT
page: 6 RCAD Steel version 3.5 - Examples
Activate User-defined for options Selecting the option enabling the definition of non-uniform
Width (X), Length (Y), Height (Z) division of width, length and height of the workframe.
(there will appear symbol )
© RoboBAT
RCAD Steel version 3.5 - Examples page: 7
Insert the following values: Defining the description parameters for height, closing the
H1, dialog box.
H11,
H2,
OK
By means of mouse define the Inserting the workframe (see drawing below), opening
direction as parallel to X axis of Workframe dialog box.
World UCS.
© RoboBAT
page: 8 RCAD Steel version 3.5 - Examples
In the field Name insert: Walls3 Defining the name of the workframe.
Activate Non-uniform for option Selecting the option that makes possible definition of non-
Width (X) and Height (Z) (there will uniform division of width and height of the workframe
appear symbol ) (compare with the drawing below).
© RoboBAT
RCAD Steel version 3.5 - Examples page: 9
In Spacing column insert the Defining the location of the successive axes of division.
following values: Attention: Inscribing the coordinate (spacing) and going to
0, any edition field (or pressing OK) causes automatic
450, calculation of the spacing (coordinate) value.
2600,
1950
In Spacing column insert the Defining the location of the successive axes of division.
following values: Attention: Inscribing the coordinate (spacing) and going to
0, any edition field (or pressing OK) causes automatic
2450, calculation of the spacing (coordinate) value.
1100,
1450,
OK
© RoboBAT
page: 10 RCAD Steel version 3.5 - Examples
For Width (X) define the following Defining the description parameters for width.
parameters:
Prefix – L2
Start value - 1
Step - 1
For Height (Z) define the following Defining the description parameters for height.
parameters:
Prefix – H2
Start value - 1
Step - 1
Activate User-defined for Length (Y) Selecting the option that makes possible defining the
option, (there will appear symbol ) description of non-uniform division of the workframe length.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 11
Using OSNAP function define the Defining the insertion point of the workframe.
origin point of the workframe, being
the intersection point of the following
axes:
W6, L2, H1
Analogically define the point located Inserting the structural workframe (see drawing below),
on intersection of axes: opening Workframe dialog box.
W6, L3, H1
© RoboBAT
page: 12 RCAD Steel version 3.5 - Examples
Activate the option Without Axes of the defined workframe will be drawn without
description description.
Switch off the option Show axes on Switching off the option causes that axes of the workframe
drawings. will not appear on any executable drawing.
Using OSNAP function define the Defining the insertion point of the workframe.
origin point of the workframe, being
the intersection point of the following
axes:
W1, L1, H2
Analogically define the point located Inserting the workframe (see drawing below), opening
on intersection of axes: Workframe dialog box.
W6, L1, H2
© RoboBAT
RCAD Steel version 3.5 - Examples page: 13
Activate the option Without Selecting the option that switches off the descriptions of
description workframe.
Activate the option Without Selecting the option switching off the descriptions of
description workframe.
© RoboBAT
page: 14 RCAD Steel version 3.5 - Examples
Select CAE 60x6 profile from the left Adding CAE 60x6 profile to the list of selected profiles.
panel,
Add>
Select from the right panel the Removing the selected profiles (the option should be
profiles carried out only when the profile appears in the right panel
UPN 200 of the dialog box).
HEA 200
Remove
© RoboBAT
RCAD Steel version 3.5 - Examples page: 15
Close Ending the profile definition, closing Profile list dialog box.
LBM in points of intersection of the Defining the initial and final insertion point of the bar.
following axes:
W1, L1, H1
W1, L1, H2
In field Rotation select the angle 90 Selecting the value of angle by which the selected element
will be rotated.
© RoboBAT
page: 16 RCAD Steel version 3.5 - Examples
LBM in the column Selecting the element to which UCS will be fitted. A cursor
type enabling the definition of the coordinate system will
appear on the screen, displaying the message Indicate the
origin in the command line.
LBM in point located in the Defining the point determining the origin of the dynamic
intersection of axes: coordinate system, change of appearance of a cursor type,
W1, L1, H1 displaying the message Indicate the direction in the
command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 17
Mark all object (beyond the Selection of the objects and its confirmation
workframe), RBM
LBM in point on the top of roof The first point of symmetry axis (in OSNAP active option
Final point)
LBM in point in the middle of axis The second point of symmetry axis (in OSNAP active option
W1-W6 Middle point)
© RoboBAT
page: 18 RCAD Steel version 3.5 - Examples
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L2, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L3, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L4, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L5, H1
© RoboBAT
RCAD Steel version 3.5 - Examples page: 19
© RoboBAT
page: 20 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 21
LBM in lately defined angles, RBM Selection of the objects and its confirmation
Using options of AutoCad: Defining welded connections of the rest angles with I-
sections analogically as described above.
(Zoom Realtime)
(Pan Realtime)
and option of Rcad:
© RoboBAT
page: 22 RCAD Steel version 3.5 - Examples
Switch off the option Without Selecting the option switching off the workframe
description descriptions.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 23
Activate the option Without Selecting the option switching off the workframe
description (there will appear symbol descriptions.
)
© RoboBAT
page: 24 RCAD Steel version 3.5 - Examples
Switch off the option Without Selecting the option switching off the workframe
description descriptions.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 25
Activate the option Without Selecting the option switching off the workframe
descriptions (there will appear descriptions.
symbol )
© RoboBAT
page: 26 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 27
LBM in the left column on the front Selecting the column, displaying the message Select the
wall of hall beam in command line.
LBM in beam adjoining to the lately Selecting the beam, opening Connection – Knee dialog
selected column box.
On tab Haunch set the parameters Selecting haunch parameters, change of connection
as presented on the drawing below, appearance on the drawings within the model area.
Apply
LBM in button Save as template Opening the dialog box to save the template of connection.
In the field Name insert: Saving the template of connection to the base, closing the
Connection1, dialog box.
OK
© RoboBAT
page: 28 RCAD Steel version 3.5 - Examples
LBM in the right column on the front Selecting the column, displaying the message Select the
wall of hall beam in command line.
LBM in beam adjoining to the lately Selecting the beam, opening Connections – knee dialog
selected column box.
Select the template Connection1 Selecting the previously saved template of connection. All
edition fields are filled by the values saved in the template.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 29
LBM in the left spandrel beam on the Selecting the column, displaying the message Select the
front wall of the hall beam in command line.
LBM in the right spandrel beam on Selecting the beam, opening Connection – Endplate –
the front wall of the hall. apex dialog box.
On the tab Endplates set the Selecting the endplates parameters, change of the
parameters as on the drawing below, connection appearance on the drawing within the model
Apply area.
© RoboBAT
page: 30 RCAD Steel version 3.5 - Examples
On Stiffeners tab set the parameters Selecting the stiffeners parameters, change the connection
as on the drawing below, appearance on the drawing within the model area.
Apply
© RoboBAT
RCAD Steel version 3.5 - Examples page: 31
On Holes/Bolts tab set the Selecting bolts and holes’ parameters, change of
parameters as on the drawing below, connection appearance on the drawing within the model
Apply area.
(Column base: pinned) Starting the definition of the pinned column base.
LBM in lower fragment of the left Selecting the column, opening Connections – Column
column on the front wall of the hall Bases Pinned dialog box.
© RoboBAT
page: 32 RCAD Steel version 3.5 - Examples
On Base plate tab set the Selecting the endplates parameters, change of connection
parameters as on the drawing below, appearance on the drawing within the model area.
Apply
On Anchor bolts tab set the Selecting the anchor bolts parameters, change of
parameters as on the drawing below, connection appearance on the drawing within the model
Apply area.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 33
Activate Wedge option (there will Activating the option makes possible defining the wedge in
appear symbol ) the designed base.
© RoboBAT
page: 34 RCAD Steel version 3.5 - Examples
LBM in base plate, Selecting the object, to which the part is to be fitted as well
LBM in angle as the object for fitting. Opening Fit by object dialog box.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 35
150 in command line The value by which the element will be lengthened.
LBM in the element being Indicating the angle in its upper part, then lengthening the
lengthened element.
LBM in the left lower corner of the Defining the origin point of the cutting line (in OSNAP active
plate of column head option Final point), displaying the message Set final point in
command line.
LBM in the right lower corner of the Defining the final point of the cutting line (in OSNAP active
plate of column head option Final point), displaying the message Select direction
in command line.
LBM in any point above the lower Defining the cutting direction.
edge of the column head
© RoboBAT
page: 36 RCAD Steel version 3.5 - Examples
LBM in Frame knee connection Selecting the connection to be copied on the other
symbol on the left side of frame structural elements, displaying the message Select objects
in command line.
Marking by dialog box the other Selecting all structural elements, the connection will be
columns and spandrel beams on the generated only on the elements situated identically as
left side of a structure, source elements, copying the connection.
RBM
LBM in Frame knee connection Selecting the connection to be copied on the other
symbol on the right side of frame structural elements, displaying the message Select objects
in command line.
Marking by dialog box the other Selecting all structural elements, the connection will be
columns and spandrel beams on the generated only on the elements situated identically as
right side of a structure, source elements, copying the connection.
RBM
LBM in Apex connection symbol Selecting the connection to be copied on the other
structural elements, displaying the message Select objects
in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 37
Marking by dialog box all other Selecting all structural elements, the connection will be
spandrel beams in the structure, generated only on the elements situated identically as
RBM source elements, copying the connection.
LBM in Column base – hinge Selecting the connection to be copied on the other
connection symbol structural elements, displaying the message Select objects
in command line.
Marking by dialog box all other Selecting all structural elements, the connection will be
columns in the structure, generated only on the elements situated identically as
RBM source elements, copying the connection.
Using AutoCAD options: Cutting the other three angles to the extreme plates in the
column base and in the frame knee.
(Zoom Realtime)
(Pan Realtime)
and RCAD options:
(Fit to object)
(Lengthen profile)
(Cut by line)
Cut the angles in the other corner
columns of hall analogically as in the
first column
© RoboBAT
page: 38 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 39
-54,50, 5400 Indicating the point defining the direction of point insertion.
LBM in the left upper plate corner of Defining the origin point of the cutting line (in OSNAP active
of the column head option Final point), displaying the message Define the final
point in command line.
LBM in the right upper plate corner Defining the final point of the cutting line (in OSNAP active
of the column head option Final point), displaying the message Select direction
in command line.
LBM in any point below the upper Defining the final point of the cutting line, displaying the
edge of the column head message Select direction in command line.
By means of dialog box zoom the left knee of the first frame
(Zoom window)
© RoboBAT
page: 40 RCAD Steel version 3.5 - Examples
LBM in point located on intersection Indicating the target point, copying the selected elements
of the following axes:
W1, L2, H2
© RoboBAT
RCAD Steel version 3.5 - Examples page: 41
LBM in point located on intersection Indicating the target point, copying the selected elements
of the following axes:
W1, L3, H2
LBM in point located on intersection Indicating the target point, copying the selected elements
of the following axes:
W1, L4, H2
LBM in point located on intersection Indicating the target point, copying the selected elements
of the following axes:
W1, L5, H2
© RoboBAT
page: 42 RCAD Steel version 3.5 - Examples
LBM in any point above the selected Defining the cutting direction.
line
© RoboBAT
RCAD Steel version 3.5 - Examples page: 43
(Pan Realtime)
Set the view on the other end of the
cut element
© RoboBAT
page: 44 RCAD Steel version 3.5 - Examples
LBM in any point above the selected Defining the cutting direction.
line
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L3, H2
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L4, H2
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L5, H2
© RoboBAT
RCAD Steel version 3.5 - Examples page: 45
Mark all objects making the attic in Selecting the objects and confirmation.
order to copy them to the right side
of the hall (TCAR 60x3.2, plate,
HEA 100),
RBM
LBM in point located on the roof The first point of symmetry axis (axis running through the
ridge middle of the hall)
LBM in the further point located on The second point of symmetry axis (axis running through
the roof ridge the middle of the hall)
LBM in plate, on which the cut profile Selecting the objects that are to be connected by means of
TCAR 60x3.2 is supported and then, bolts.
LBM in the profile TCAR 60x3.2,
RBM
© RoboBAT
page: 46 RCAD Steel version 3.5 - Examples
(Drill)
Screw down the second end of
element to the plate and also the
other identical elements connecting
the frames analogically as described
above.
LBM in profile HEA 100 , Selecting the objects that are to be welded with one
LBM in plate at the bottom of profile another.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 47
LBM in profile HEA 100 , Selecting the objects that are to be welded with one
LBM in plate at the bottom of profile another.
(Weld)
weld analogically the other elements
of this type
© RoboBAT
page: 48 RCAD Steel version 3.5 - Examples
LBM in point located on intersection Final point. Ending the definition of auxiliary line of wall
of the following axes: bracing.
W1, L1, H2
LBM in previously defined auxiliary Indicating the first auxiliary line for bracing definition.
line Displaying the message Select the second auxiliary line of
bracing in command line.
LBM in column, the ends of which Selecting the first column. Displaying the message Select
are located on intersection of the the second column in command line.
following axes:
W1, L2, H1
W1, L2, H2
LBM in column, the ends of which Selecting the second column. Displaying the message
are located on intersection of the Limitations in command line.
following axes:
W1, L1, H1
W1, L1, H2
© RoboBAT
RCAD Steel version 3.5 - Examples page: 49
© RoboBAT
page: 50 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 51
Analogically define the other Defining the other bracings in the walls of the hall.
bracings as presented on the
drawing below.
© RoboBAT
page: 52 RCAD Steel version 3.5 - Examples
In Spacing column insert the Defining the location of the particular distribution lines.
following values: Attention: Inserting the coordinate (spacing) and moving to
0, any edition field (or pressing OK) automatically calculates
110, the value of spacing (coordinate).
1187,
1187,
1187,
1184,
145,
5000
© RoboBAT
RCAD Steel version 3.5 - Examples page: 53
Activate User-defined for option Selecting the option that makes possible defining the
Width (X), there will appear symbol description of irregular distribution of width, length and
) height of the workframe.
Switch off the option Without Selecting the option that switches off the axis descriptions.
description
© RoboBAT
page: 54 RCAD Steel version 3.5 - Examples
LBM in point located on intersection Final point. Ending the definition of auxiliary line of bracing
of the following axes: for purlin.
D4, L1, H22
© RoboBAT
RCAD Steel version 3.5 - Examples page: 55
LBM in previously defined auxiliary Indicating the first auxiliary line for bracing definition.
line Displaying the message Select the second auxiliary line of
bracing in command line.
LBM in the left spandrel beam of the Selecting the first column. Displaying the message Select
first frame the second column in command line.
LBM in the left spandrel beam of the Selecting the second column. Displaying the message
second frame Limitations in command line.
© RoboBAT
page: 56 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 57
Analogically define the other bracing Defining the other bracings for purlins.
as on the drawing below, adding
analogically the axes in workframe
Roof1
© RoboBAT
page: 58 RCAD Steel version 3.5 - Examples
LBM in the left spandrel beam of the Selecting the element, to which UCS will be adjusted. A
first frame cursor type that makes possible definition of the coordinate
system will appear on the screen, displaying the message
Indicate the origin in command line.
LBM in point located on intersection Defining the point determining the origin of the dynamic
of the following axes: coordinate system, change of appearance of cursor type,
W1, L1, H2 displaying the message Indicate the direction in command
line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 59
V in command line Selecting Value option, that makes possible to define the
value by which the element is to be lengthened.
© RoboBAT
page: 60 RCAD Steel version 3.5 - Examples
172.5 in command line The value by which the element will be lengthened.
LBM in the right end of purlin Indicating IPE100 I-section, then lengthening the element
LBM in the left end of purlin Indicating IPE100 I-section, then lengthening the element
LBM in purlin Selecting the object, displaying the message Insert the gap
value in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 61
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
D3, L1, H22
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
D4, L1, H22
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
D5, L1, H22
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
D6, L1, H22
Analogically define the other purlins Defining the other roof slopes
(the right roof slope of hall)
Activate the option Without Selecting the option switching off the workframe
description (there will appear symbol descriptions.
)
© RoboBAT
page: 62 RCAD Steel version 3.5 - Examples
LBM in the left spandrel beam of the Selecting the main beam, displaying the message Select
first frame the secondary beam in command line.
LBM in the third purlin from the left, Selecting the secondary beam, opening Connections –
connecting the first frame with the purlin dialog box.
second one
© RoboBAT
RCAD Steel version 3.5 - Examples page: 63
© RoboBAT
page: 64 RCAD Steel version 3.5 - Examples
LBM in the left spandrel beam of the Selecting the main beam, displaying the message Select
second frame the secondary beam in command line.
LBM in the third purlin from the left, Selecting the secondary beam, opening Connections –
connecting the first frame with the purlin dialog box.
second one
LBM in plate above the left corner in Selecting the element to which UCS will be adjusted. A
the first frame cursor type, that makes possible definition of the coordinate
system appears on the screen, displaying the message
Indicate the origin in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 65
© RoboBAT
page: 66 RCAD Steel version 3.5 - Examples
Analogically define the other purlin Defining the other roof slope connections.
connections on the left and the right
side of roof slope
Objects inspector / Current selection Selecting the option Current selection from drop-down list
located in Objects Inspector dialog box.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 67
Activate the option Use filtering on Activating this option causes that all elements of drawing
screen (there will appear symbol ) except the marked ones become invisible.
© RoboBAT
page: 68 RCAD Steel version 3.5 - Examples
LBM in the middle point of the left Defining the origin point. The drawing settings should be
corner purlin, connecting the first matched in such a way so that it would be easy to find the
frame with the second one middle point.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 69
Analogically connect the other Defining the other bars connecting the purlins.
purlins together, the second with the
third one, etc.
© RoboBAT
page: 70 RCAD Steel version 3.5 - Examples
V in command line Selecting Value option, that makes possible to define the
value by which the element is to be lengthened.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 71
LBM in the left end of bar No 1 Indicating the profile connecting the element’s purlins and
LBM in the right end of bar No 1 its lengthening. Ending the option operation.
Lengthen the other profiles of this Lengthening the other profiles connecting the purlins.
type in similar way, in order they
exceed beyond the purlins
analogically as in case of bar No 1
LBM in all lengthened profiles (9 Selecting the objects to be copied. Confirming the selection.
units) connecting the purlins,
RBM
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L2
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L3
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L4
© RoboBAT
page: 72 RCAD Steel version 3.5 - Examples
Objects Inspector / Current selection Selecting the option All objects from drop-down list located
in Objects Inspector dialog box.
Apply Refreshing the drawing.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 73
© RoboBAT
page: 74 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 75
Analogically define the connection Defining the stiffeners in the next column.
on the right column in the first frame
LBM in connection symbol Stiffener Selecting the connection that will be copied on the other
distribution on the left column of the structure elements, displaying the message Select objects
first frame in command line.
Marking by dialog box the other Selecting all structure elements, the connection will be
columns on the left side of the generated only on the elements located identically as
structure, source elements, copying the connection.
RBM
LBM in connection symbol Stiffener Selecting the connection that will be copied on the other
distribution on the right column of the structure elements, displaying the message Select objects
first frame in command line.
Marking by dialog box the other Selecting all structure elements, the connection will be
columns on the right side of the generated only on the elements located identically as
structure, source elements, copying the connection.
RBM
© RoboBAT
page: 76 RCAD Steel version 3.5 - Examples
LBM in previously defined plate, Selecting the object and confirming the selection, displaying
RBM the message Indicate the insertion point in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 77
© RoboBAT
page: 78 RCAD Steel version 3.5 - Examples
LBM in previously defined plate, Selecting the object and confirming the selection, displaying
RBM the message Indicate the insertion point in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 79
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L2, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L3, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L4, H1
LBM in point located on intersection Indicating the target point, copying the selected elements.
of the following axes:
W1, L5, H1
In similar way define the plates on Analogical definition of the other plates
column bases on the right side of the
hall
LBM in the bottom fragment of the Selecting the column, opening Connections – Column
second column from the left side on Bases Pinned dialog box.
the front wall of hall
On Base plate tab set the Selecting the parameters of base plates, change of
parameters as on the drawing below, connection appearance on the drawing within the model
Apply area.
© RoboBAT
page: 80 RCAD Steel version 3.5 - Examples
On Anchor bolts tab set the Setting the parameters of anchor bolts, change of
parameters as on the drawing below, connection appearance on the drawing within the model
Apply area.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 81
LBM in symbol of recently defined Selecting the connection that will be copied on the other
connection structure elements, displaying the message Select objects
in command line.
Marking by dialog box the other Selecting all structure elements, the connection will be
columns on the front wall of the generated only on the elements located identically as
structure, source elements, copying the connection
RBM
© RoboBAT
page: 82 RCAD Steel version 3.5 - Examples
LBM in base plate, Selecting the object, to which the part is to be fitted as well
LBM in post TCAR 80x3.6 as the object for fitting. Opening Fit by object dialog box.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 83
LBM in recently defined plate, Selecting the object and confirming the selection, displaying
RBM the message Indicate insertion point in command line.
© RoboBAT
page: 84 RCAD Steel version 3.5 - Examples
Mark recently defined plate, Selecting the object and confirming the selection
RBM
LBM in base plate, Selecting the object, to which the part is to be fitted as well
LBM in post TCAR 80x3.6 as the object for fitting. Opening Fit by object dialog box.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 85
LBM in the first plate, Selecting the objects to be welded with one another.
LBM in post TCAR 80x3.6
© RoboBAT
page: 86 RCAD Steel version 3.5 - Examples
Activate option Without description Selecting the option switching off descriptions of workframe.
V in command line Selecting Value option that makes possible defining the
value by which the element is to be shortened.
LBM in the right end of profile which Indicating TCAR 80x3.6 profile, then shortening the
begin is located on intersection of element.
axes W2, L1, H11, and end on
intersection of axes W5, L1, H11
LBM in the left end of profile which Indicating TCAR 80x3.6 profile, then shortening the
begin is located on intersection of element.
axes W2, L1, H11, and end on
intersection of axes W5, L1, H11
© RoboBAT
RCAD Steel version 3.5 - Examples page: 87
V in command line Selecting Value option that makes possible defining the
value by which the element is to be lengthened.
LBM in the lengthened element Marking the angle by indicating its begin, in such a way so
that the profile was lengthened in the direction of
neighbouring column (I-section).
LBM in recently defined angle, Selecting the objects that are to be welded with one
LBM in TCAR 80x3.6 profile another.
adjoining the angle
© RoboBAT
page: 88 RCAD Steel version 3.5 - Examples
LBM in recently defined angle (CAE Selecting the objects and confirming the selection,
60x6), displaying the message Indicate the insertion point in
LBM in I-section adjoining to it (IPE command line.
200),
RBM
© RoboBAT
RCAD Steel version 3.5 - Examples page: 89
In similar way define the connection Defining the identical connection on the second end of
of the second end of profile TCAR element.
80x3.6 with column IPE 200
LBM in the second column from the Selecting the column, displaying the message Select beam
left side located on the front wall of in command line.
the hall
LBM in the left spandrel beam in the Selecting the beam. Opening Connection – Endplate –
first frame Column/Beam flange dialog box.
© RoboBAT
page: 90 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 91
© RoboBAT
page: 92 RCAD Steel version 3.5 - Examples
© RoboBAT
RCAD Steel version 3.5 - Examples page: 93
LBM in symbol of recently defined Selecting the connection to be copied on the other
connection structural elements, displaying the message Select objects
in command line.
Marking the second column from the Selecting the structural elements, the connection is
right side, located on the front wall of generated only on the elements located indentically as
the hall and the right spandrel beam source elements, copying the connection.
of the first frame
RBM
LBM in TCAR 80x3.6 profile, which Selecting the object, to which the part is to be fitted as well
ends are located on intersection of as the object for fitting. Opening Fit by object dialog box.
axes
W2, L1, H11
W5, L1, H11
LBM in the post which ends are
located on intersection of axes
W3, L1, H1
W3, L1, H11
© RoboBAT
page: 94 RCAD Steel version 3.5 - Examples
LBM in TCAR 80x3.6 profile, which Selecting the element, to which UCS will be fitted. A cursor
ends are located on intersection of type enabling the definition of the coordinate system will
axes appear on the screen, displaying the message Indicate the
W2, L1, H11 origin in the command line.
W5, L1, H11
LBM in point located on intersection Defining the point determining the origin of dynamic
of axes: coordinate system, change of cursor type appearance,
W3, L1, H11 displaying the message Indicate direction in command line.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 95
LBM in recently defined plate, Selecting the objects that are to be welded with one
LBM in the post TCAR 80x3.6 another.
adjoining the plate
© RoboBAT
page: 96 RCAD Steel version 3.5 - Examples
LBM in recently defined plate, Selecting the objects and confirming the selection,
LBM in adjoining profile (TCAR displaying the message Indicate insertion point in command
80x3.6), line.
RBM
© RoboBAT
RCAD Steel version 3.5 - Examples page: 97
© RoboBAT
page: 98 RCAD Steel version 3.5 - Examples
Switch off the option Without Selecting the option activating the workframe description.
description
Apply, OK Activating the workframe descriptions, closing Workframe
descriptions dialog box.
LBM in TCAR 60x3.2 profile, which Selecting the element, to which UCS will be adjusted. A
ends are located on intersection of cursor type that makes possible definition of the coordinate
axes system will appear on the screen, displaying the message
W6, L21 H23 and Indicate the origin in command line.
W6, L24, H23
LBM in intersection point of axes: Defining the point determining the origin of the dynamic
W6, L24, H23 coordinate system, change of appearance of cursor type,
displaying the message Indicate the direction in command
line.
LBM column IPE 200, Selecting the object, to which the part is to be fitted as well
LBM profile TCAR 60x3.2 as the object for fitting. Opening Fit by object dialog box.
© RoboBAT
RCAD Steel version 3.5 - Examples page: 99
© RoboBAT
page: 100 RCAD Steel version 3.5 - Examples
LBM in the lengthened element Marking the angle by indicating its begin so that the profile
was lengthened in the direction of the neighbouring column
(I-section).
LBM in recently defined angle, Selecting the objects that are to be welded with one another
LBM in profile TCAR 60x3.2
adjoining the angle
© RoboBAT
RCAD Steel version 3.5 - Examples page: 101
© RoboBAT
page: 102 RCAD Steel version 3.5 - Examples
LBM in recently defined angle (CAE Selecting the objects and confirming the selection,
60x6), displaying the message Indicate the insertion point in
LBM in adjoining I-section (IPE 200), command line.
RBM
© RoboBAT
RCAD Steel version 3.5 - Examples page: 103
© RoboBAT