Академический Документы
Профессиональный Документы
Культура Документы
The Heat Finder is a dual (normal and thermal) camera designed to detect EBT (Elevated
Body Temperature). It comes with the T-Guard software that enables you to monitor people
entering rooms, buildings and more. The combination is easy to set up in no time, either
fixed at a certain entry point, or with a tripod and lap-top as a flexible mobile setup.
The camera can detect EBT within a distance of 1 .. 1.5 m. It takes less than a second to get
an accurate reading. The T-Guard software will show a red screen and optionally give an
audio warning as well when EBT is detected on a person.
Max 1,5 m.
Max 1 m.
This is not a medical instrument, it cannot detect a fever or any disease. If EBT is detected this
should always be followed by a approved medical temperature reading (eg. an ear thermometer)
by qualified personnel.
It is possible that persons with a (small) fever or a virus disease are not detected by the system
Technical Data
Heat Finder
Optical photography
Effective resolution 2 million pixels (1920 × 1080 pixels) 16: 9
Temperature measurement
20 ~ 100 ℃
range
Number of simultaneous
4 people at 1.5 meter
detecttions
System
•Support IEEE802.11b / g
Network WiFi wireless connection with RJ45 Ethernet simultaneously
settings •WiFi wireless support AP / client mode switching
•Support fixed and DHCP two IP setting modes
•Reset reset button x1 group restore factory settings
input Output •LED indicator (blue) x1 indicates that the system is in operation
•LED indicator (yellow) x1 indicates network data transmission
power input 5Vdc / 2.5A (Micro-USB connector) PSU not included
Operating
0 ~ 40 ℃, ≦ 95% RH
temperature
Storage
-10 ~ 60 ℃, ≦ 95% RH
temperature
size 101.3mm (height) x 65.5mm (width) x 43.8mm (deep)