Академический Документы
Профессиональный Документы
Культура Документы
Vacuum
Pumps and
Stations
Vacuum Pumps & Stations
Air-Powered Mini-Vacuum Stations
132 00 158 • Revision H
Control Number: 111504
AL101 Features:
Stainless Steel
Enclosure and Plated
Components 4.44 1.56
5.00 1.50
1 (113) (40) (38) 1.31
(127) AL
10
2.50 (33)
(64) 0.56 (14)
AL1001 Features:
11.00 AL
10
• Include a pressure gauge for (279)
01
3.56
9.50 (90)
(241)
Specifications:
Vacuum Vacuum Air Optimum Maximum
ANVER Weight
Generator Flow Consumption Supply Vacuum
Item lbs.
Model SCFM SCFM Pressure in. Hg
No. (kg)
Number (l/min.) (l/min.) (PSI) (mm Hg)
0.74 1.27 27 7
AL101 VR09 72.5
(21) (36) (686) (3)
4.30 7.00 27 16
AL1001/20 JE20H 72.5
(122) (198) (686) (7)
7.00 9.50 27 16
AL1001/25 JE25H 72.5
(198) (269) (686) (7)
36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • www.anver.com • E-Mail: sales@anver.com
Vacuum Pumps & Stations
Electric Powered Mini-Vacuum Stations
115 VAC
TWIST-LOC
EP
10 POWER CORD
11.00 01 4 FT. LONG
PO
WER
5.50 ON
VA
CU
OFF UM
8.50
1/4" NPT
VACUUM PORT
9.50 3.56
Specifications:
Model Vacuum Supply Vacuum Flow Max. Vacuum * Weight
Number Pump No. Voltage SCFM in. Hg lbs.
(l/min.) (mm Hg) (kg)
EP1001 PMP-085-115 115-60-1 0.85 44 16
(24.12) (610) (7)
Air Powered Vacuum Pumps and Stations
Mitey-AirVac Air Powered Vacuum Stations
3.31 3.31
(84) 3.66 (84)
(4) M5 (93)
(4) M5 6.41
TAPPED (163)
HOLES TAPPED
4.11 HOLES
(104) 4.11
1.55 (104) 1.55
(39) (39)
(4) M5
(13) REMOTE RELEASE/BLOW-OFF *
(4) M5 TAPPED 5.25
2.50 HOLES
TAPPED (64) (133)
HOLES
0.50 (13) 0.50 (13)
0.88 (22) 0.88 (22)
MTY-1 1.55
(39)
MTY-2 1.55
(39)
Air Powered Vacuum Pumps and Stations
Mitey-AirVac Air Powered Vacuum Stations
1.27 0.74 26 2
MTY-1-09-FB VR09 72
(36) (21) (660) (0.9)
2.37 1.59 26 3
MTY-2-12 JE12H 72
(67) (45) (660) (1.4)
2.37 1.59 26 3
MTY-2-12-FB JE12H 72
(67) (45) (660) (1.4)
3.53 2.47 26 3
MTY-2-15 JE15H 72
(100) (70) (660) (1.4)
3.53 2.47 26 3
MTY-2-15-FB JE15H 72
(100) (70) (660) (1.4)
6.36 4.41 26 3
MTY-2-20 JE20H 72
(180) (125) (660) (1.4)
6.36 4.41 26 3
MTY-2-20-FB JE20H 72
(180) (125) (660) (1.4)
9.53 7.06 26 3
MTY-2-25 JE25H 72
(270) (200) (660) (1.4)
9.53 7.06 26 3
MTY-2-25-FB JE25H 72
(270) (200) (660) (1.4)
PC-T14 Remember to purchase PC-T14 Tubing - Sold Separately - (Keep in mind that you need to
specify a length of tubing long enough for both incoming and outgoing control)
8060301
Vac-Pack Vacuum Generator
Air Powered
132 00 367
MANIFOLD
Control Number 022704C
VACUUM GAUGE 1/4" NPTF
FILTER
VIEW PORT VP
F-5
INPUT AIR
SUPPLY
PORT
VPF-57 AIR Series
7 VAIR
ANVER’s latest models of vacuum generators
ac Se
-P rie
ac s
k
22.25"
(565 mm) feature high capacity pumps, valves, filters and
gauges for trouble-free operation in the most
demanding production environments. Designed
17.94"
(456 mm) for use with a wide assortment of vacuum lifter
17.38" assemblies and interchangeable pad attachments.
(441 mm)
These high quality Vac-Packs are ruggedly built,
yet affordably priced for unmatched value. The
(2) 3/8" NPTF VPF-57 AIR Series features a sturdy welded
VACUUM PORTS
ATTACH / RELEASE
SLIDE VALVE PRESSURE GAUGE
frame construction for heavy weight load
lifting capability.
Features: Maintenance:
■ Air Powered Vacuum Generator ■ Air Filter
No electric power required, operates using dry, clean Oversized air filter provided inside the front cover features a
compressed air for vacuum generation. The vacuum screw-on clear filter bowl for easy filter cleaning.
generator is a single stage unit with no moving
parts or rubber gaskets to maintain or replace.
General:
■ Standard Frame Construction
■ Front Mounted Gauges
The VPF-57 AIR Series has a fully welded frame
Includes both an input air pressure and vacuum
with a vacuum reservoir and load lifting capacity rating of
indicator gauges, front mounted for continuous
2,200 lb. (998 kg) for 3” sq. beams.
monitoring by the operator. Also included is a
filter view port to monitor filter for cleaning.
■ (Optional) Heavy Duty Frame Construction Available
■ Ergonomic Front Handlebar Load lifting capacity rating of 4,100 lb. (1,860 kg) for 3” x 6”
Easy to grasp, large loop handlebar allows the beams. Consult factory for application requirements.
operator to easily and safely maneuver the
attached load without pushing on the load itself. ■ Versatility
For larger load lifting capability or alternate power
■ Slide Control Valve requirements, ANVER offers electric powered and
The slide valve permits rapid vacuum attach self-powered mechanical vacuum generators, all with stan-
and release and is mounted to the handlebar dard mounting designs for interchangeability.
for convenient access by the operator.
Options:
■ Vacuum Check Valve and Reservoir ■ Optional Vacuum Leakage Sensing System (VLS-07)
A check valve and a vacuum reservoir help to The VLS-07 Series are battery powered units
maintain vacuum if the supply of compressed air is consisting of solid state circuitry with microcontroller,
interrupted, for safe handling of non-porous loads. pressure sensor, LCD digital display of inches of Hg, warning
audible horn and red light. System is plumbed
■ Takes Standard Dry, Clean Shop Air to the Vac-Pack and monitors vacuum level triggering
Input Pressure to be regulated to 75 psi. Provided with 1/4” the alarm in the event of unsafe vacuum level.
NPT input air supply connector and shut-off slide valve.
■ Optional Water Trap (WT-PF)
For wet applications: prevents saturation of filter
and possible damage to vacuum generator.
Specifications:
Vac-Pack Vacuum Air Req. Input Unit Vacuum Beam
Model No. Flow Consumption Pressure Weight Level Application Size
(scfm) (scfm) (psi) lb. (Kg) (Sea Level)
VPF-57/20-AIR 4.3 6.5 24” Hg Most smooth,
(Standard) non-porous materials 3” Sq.
VPF-57/25-AIR 7.0 9.5 75 60 (27.2) Consult Rough or semi-porous
VPF-57/30-AIR 9.2 14.0 Factory materials, wood, stone etc.
VPF-57/20HD-AIR 4.3 6.5 24” Hg Most smooth,
non-porous materials 3” x 6”
VPF-57/25HD-AIR 7.0 9.5 75 60 (27.2) Consult Rough or semi-porous
VPF-57/30HD-AIR 9.2 14.0 Factory materials, wood, stone etc.
36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • www.anver.com • E-Mail: sales@anver.com
Vacuum Pumps and Vacuum Generators
Compressed Air Powered Vacuum Stations
AP Series Vacuum Stations
With Unique All Pneumatic Energy Saver Circuitry that Shuts Off the
Compressed Air Supply Line When Vacuum Is Achieved for More Economical
Operation
Features:
• All Pneumatic Energy Saver Circuitry automatically shuts off the
compressed air consumption when the proper vacuum level is achieved
• A Complete Vacuum Station with whisper-quiet air pump, vacuum
reservoir, muffler and controls
• Dry, oil-free air pump avoids contamination
• Generates Vacuum Levels of up to 27 in. Hg
20 9.25 13.9 38 14 24 76
AP-20G30 1/2” NPT JB30
(76) (394) (590) (965) (356) (610) (34)
*scfm flow and consumption shown at optimum operating pressure of 5bar = 72.5 psi.
1130501
Vac-Pack Vacuum Generator
Electric Powered
MANIFOLD POWER CORD
VPF-57-AC Series
VACUUM GAUGE
FILTER
VIEW PORT
-A
C ANVER’s latest models of vacuum generators
22.25"
(565 mm) feature high capacity pumps, valves, filters and
gauges for trouble-free operation in the most
demanding production environments. Designed for
17.94"
(456 mm) use with a wide assortment of vacuum lifter
17.38"
(441 mm)
assemblies and interchangeable pad attachments.
These high quality Vac-Packs are ruggedly built,
(2) 3/8" NPTF yet affordably priced for unmatched value. The
VACUUM PORTS
ATTACH / RELEASE
SLIDE VALVE
VPF-57-AC features a sturdy welded frame con-
POWER SWITCH
struction for heavy weight load lifting capability.
Features: General:
■ Front Mounted Controls and Gauges ■ Vacuum Pump Description
Vacuum gauge is mounted on front cover for continuous High-performance oil-less dry piston pump has a ½ hp motor
monitoring by operator. The power switch includes built-in capable of generating 4.3 cfm. Motor is thermally protected
circuit breaker. Also included is a filter view port to monitor and is rated for 100% duty cycle.
filter for cleaning.
■ Standard Frame Construction
■ Ergonomic Front Handlebar The VPF-57-AC Series has a fully welded frame
Easy to grasp, large loop handlebar allows the operator with a vacuum reservoir and load lifting capacity rating of
to easily and safely maneuver the attached load without 2,200 lb. (998 kg) for 3” sq. beams.
pushing on the load itself.
■ (Optional) Heavy Duty Frame Construction Available
■ Slide Control Valve Load lifting capacity rating of 4,100 lb. (1,860 kg) for 3” x 6”
beams. Consult factory for application requirements.
The slide valve allows rapid vacuum attach and release and
is mounted to the handlebar for convenient access by the
operator. ■ Versatility
For larger load lifting capability or alternate power
requirements, ANVER also offers other electric, air
■ Vacuum Check Valve and Reservoir powered, and self-powered mechanical vacuum
A check valve with vacuum reservoir helps to maintain generators. All units are provided with modular
vacuum if electrical power is interrupted, for safe handling standard mounting designs for interchangeability.
of non-porous loads.
Options:
■ Twistlock Power Cord Plug and Receptical ■ Optional Vacuum Leakage Sensing System (VLS-07)
Both Twistlock plug and receptical are provided to prevent The VLS-07 Series are battery powered units consisting
accidental power cord separation. of solid state circuitry with microcontroller, pressure sensor,
LCD digital display of inches of Hg, warning audible horn and
red light. System is plumbed to the Vac-Pack and monitors
Maintenance: vacuum level triggering the alarm in the event of unsafe
■ Oil-Less Dry Piston Vacuum Pump Motor vacuum level.
Powerful ½ horsepower motor drives a high-performance 4.3
CFM dry piston vacuum pump. ■ Optional Water Trap (WT-PF)
For wet applications: prevents saturation of filter and possible
■ Air Filter damage to pump.
Oversized air filter provided inside the front cover features a
screw-on clear filter bowl for easy filter cleaning.
Specifications:
Vac-Pack Pump Cap. Vacuum Vacuum Unit Incoming Power Beam
Model No. (scfm) Pump Level Weight Requirement Size
hp (Sea Level) lb. (kg) AC
VPF-57-AC 4.3 ½ 24” Hg 68 (30.8) 115V/60Hz/1ph/6amps 3” Sq.
VPF-57-AC240 4.3 ½ 24” Hg 68 (30.8) 220-240V/50Hz/1ph/3amps 3” Sq.
VPF-57HD-AC 4.3 ½ 24” Hg 68 (30.8) 115V/60Hz/1ph/6amps 3” x 6”
VPF-57HD-AC240 4.3 ½ 24” Hg 68 (30.8) 220-240V/50Hz/1ph/3amps 3” x 6”
Vac-Pack Vacuum Generator
Electric Powered
132 00 279
Control No.: 061405K
VPE1-FD (Series) shown
VPE1 Series
Page 1 of 2
W
WIDTH
L
LENGTH with ANVER VacGuard II™
ATTACH/RELEASE Vacuum Control System
CONTROL PENDANT
ANVER’s VPE1 Series Vac-Packs feature dual
25.0" vacuum ports, over-sized filters and increased
(635 mm)
air flow, making them particularly suitable for
handling non-porous to semi-porous loads.
H
HEADROOM Designed for use with a wide assortment of
vacuum pad attachments and lifter assemblies,
18.5" these high quality Vac-Packs are ruggedly
(470 mm)
designed for heavy production use. Units are
3/8" NPT VACUUM PORTS (2)
WITH BALL VALVE SHUT-OFF available with heavy duty frames, for mounting
remotely, on pillars, or on overhead trolleys.
Features: Maintenance:
• VacGuard II Vacuum Control System • Bottom Hinged Front Cover & Rear Hinged Top-Back Panel
This revolutionary solid-state Vacuum Control System combines The front cover folds open for easy access to all components.
all the required vacuum generator controls in a rugged, compact
polycarbonate enclosure. The VacGuard II controls all vacuum • Air Filter
pump functions, safety lights and can be fitted with an optional Oversized air filter provided inside of front cover features a
audible vacuum leakage warning system. screw-on clear filter bowl for easy filter cleaning.
ANVER Corp. • 36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • E-Mail: sales@anver.com • www.anver.com
Vac-Pack Vacuum Generator
Electric Powered
VPE1-XDR
Electric Vacuum Station Optional Feature
VPE1-FD (Series) shown R Continuous running pump in
the attach mode for use on
semi-porous loads.
With ANVER VacGuard II™
Vacuum Control System Truncate ‘R’ if feature is not
(#VS35000018) needed.
This integrated solid state
vacuum control is standard
with all VPE1 Series Vac-Packs Dry Piston Pump (Standard)
D Dry Piston Pump with ½ hp
motor shuts off and restarts at
VLS-03E is standard on VPE1
Series. preset vacuum levels, gener-
ating up to 4.3 cfm. Power
supply required: 115V-60Hz-1ph
15 amp circuit.
Standard Frame
For lifters having beam
size 3” x 3” (76 mm sq.)
and lifting capacity* up to 2200 lb (997.9 kg).
T
Tilter Mount
H Same as remote mount, but pendant has an extra
switch to control an electric tilt actuator. Mounted
with (4) 5/16-18 UNC tapped holes.
O
X *Overhead Trolley (Model VP1-OD)
Heavy Duty Frame Pendant not available, vacuum on/off must be
For lifters having beam size 5” x 7” (127 x 178 mm) controlled by an external valve.
and lifting capacity up to 4600 lb (2078 kg).
Note: Capacities shown are approximations, actual capacity is dependent upon the lifting application.
Vac-Pack Vacuum Generator
Electric Powered
132 00 280
Revision: B
January 3, 2002
LIFT BALE Page 1 of 2
VPE3 Series
4" X 5" (100 X 125)
HOOK OPENING
W L with ANVER VacGuard™
Vacuum Control System
23.6 Options
(600)
Heavy-Duty Frame
Optional Water Traps for Wet
Applications: Prevents Saturation of Filters
3/4" NPTF VACUUM PORTS (2) and Possible Damage to Pumps
WITH BALL VALVE SHUT-OFF Remote Configuration
I/Prdcsht/VPS#(13200280)
36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • www.anver.com E-Mail: sales@anver.com
Vac-Pack Vacuum Generator
Electric Powered
VPE3-X
Electric
Vacuum Generator
VPE3-S shown
H
Standard Duty Frame
For lifters having a beam size of 3” x 6”
(76 X 152 mm) rectangular tubing and lifting
capacity up to 6,900 lb (3130 kg). Heavy Duty Frame
For lifters having beam size of 5” x 7” (127
X 178 mm) and lifting capacity up to 8,000
lb (3629 kg) or more. Check with factory.
T
Remote Mount
This unit has no bale and will mount on a flat
surface using four (4) 5/16-18 UNC tapped
holes. Remote Mount For Tilter
Same as the Remote Mount, but pendant
has an extra switch to control an electric tilt
actuator or hydraulic cylinder.
Vac-Pack Vacuum Generator
Battery Powered
132 00 388
Control Number: 081104H
VPF-57-DC shown BATTERY CONDITION
VPF-57-DC Series
INDICATOR
MANIFOLD
VACUUM GAUGE 12V DC POWER/CHARGER
POWER LIGHTS
FILTER
VIEW PORT CHARGER
POWER CORD ANVER’s VPF-57-DC Series Vac-Pack Vacuum
22.25"
(565mm) Generator contains the same features as the
17.94" standard VPF-57-AC Series but includes a heavy
(456mm)
duty rechargeable 12 volt DC battery, making it
17.38"
(441mm) suitable for handling non-porous loads. It is
(2) 3/8" NPTF commonly used for special applications where
VACUUM PORTS
DC POWER SWITCH AC power is not readily available.
ATTACH RELEASE
SLIDE VALVE
Features: Maintenance:
■ Front Mounted Controls and Gauges ■ Oil-Less Diaphragm Vacuum Pump Motor
Vacuum gauge is mounted on front cover for continuous Powerful 1/5 horsepower motor drives a 1.12 CFM
monitoring by operator. Also included is a filter view port to diaphragm vacuum pump.
monitor filter for cleaning. ■ Air Filter
■ Indicator Lights Oversized air filter provided inside the front cover features a
• Amber light indicates “power on” for Vac-Pack Vacuum screw-on clear filter bowl for easy filter cleaning.
Generator.
• Red light indicates “charger-on” for battery charger. General:
■ Ergonomic Front Handlebar
Easy to grasp, large loop handlebar allows the operator ■ Vacuum Pump Description
to easily and safely maneuver the attached load without High-performance oil-less diaphragm pump has a 1/5 hp
pushing on the load itself. motor capable of generating 1.12 cfm. Motor is rated for
100% duty cycle.
■ Attach and Release Controls
VPF-57-DC (Standard): Slide valve allows rapid vacuum ■ Standard Frame Construction
attach and release. The VPF-57-DC Series has a fully welded frame with a
vacuum reservoir and load lifting capacity rating of 2,200 lb.
VPF-57-DCP (Optional): Attach and release push-button (998 kg) for 3” sq. beams.
located on control pendant with 8ft long coiled cord.
■ Battery Specifications
Both styles are mounted to the handlebar for convenient • 12 amp hour, sealed battery can provide full 8 hour shift
access by the operator. operation in many applications.
■ Vacuum Check Valve and Reservoir
■ Versatility
A check valve with vacuum reservoir helps to maintain
For larger load lifting capability or alternate power
vacuum if electrical power is interrupted, for safe handling
requirements, ANVER also offers other electric, air powered,
of non-porous loads.
and self-powered mechanical vacuum generators. All units
■ Automatic Vacuum Control for Vacuum Pump are provided with modular standard mounting designs for
When Vac-Pack reaches preset vacuum level, the vacuum pump easy interchangeability.
will automatically stop running. During the lift cycle, if the Vac-
Pack resevoir loses some of its vacuum, the vacuum pump will
automatically restart and run until original preset vacuum level is Options:
attained. This control will reduce battery draw to acheive full-shift ■ Optional Vacuum Leakage Sensing System (VLS-07)
operation. The VLS-07 Series are battery powered units consisting of
■ Battery Charger (GC-CHARGE-15) solid state circuitry with microcontroller, pressure sensor,
Integrated 1.5 amp battery charger is an advanced battery LCD digital display of inches of Hg, warning audible horn and
charger designed specifically for today’s high performance deep- red light. System is plumbed to the Vac-Pack and monitors
cycle AGM batteries. It provides microprocessor controlled three- vacuum level triggering the alarm in the event of vacuum
step charging. A male receptacle is supplied to plug into a stan- leakage detection.
dard outlet. The charger is interlocked to prevent Vac-Pack from ■ Optional Water Trap
being used during charging. A “charger on” indicator light located For wet applications: prevents saturation of filter and possible
on front cover of Vac-Pack will illuminate when battery is being damage to pump.
charged.
Specifications:
Vac-Pack Attach/Release Pump Cap. Vacuum Vacuum Unit Generator Incoming Power Beam
Model No. Control (scfm) Pump Level Weight Power Requirement Size
hp (Sea Level) lb. (kg) for Charger
VPF-57-DC (Standard) Slide Valve
1.12 1/5 24” Hg 80 (36) 12V DC @ 12amp 120V/1PH/60Hz 3” Sq.
VPF-57-DCP (Optional) Control Pendant
Vac-Pack Vacuum Generator
Battery Powered
132 00 296 • Revision: B
BATTERY CASE Effective Date: 02-11-03
Page 1 of 1
14.81
(376.2)
OPTIONAL
GC-CHARGE-10
BATTERY
CHARGER
BAE1 Series
with ANVER VacGuard™
Vacuum Control System
12.38 2.63
(314.3) 25.25 (66.8) ANVER’s BAE1 Series Vac-Pack Vacuum
(641.3) ATTACH/RELEASE
CONTROLS
Generator contains the same features as the stan-
dard VPE1 Series but includes a heavy duty
3.31 8.00
27.88 (708.1) REF.
rechargeable 12 volt DC battery, making it suitable
(84.1) (203.2) for handling non-porous loads. It is commonly
used for special applications where AC power is
3.44 (87.3)
not readily available.
5.25 (133.3)
12.38
(314.3)
ANVER Item No. Description
(4) 5/16-18 UNC BAE1-RA Remote Vacuum Station, Battery Powered
TAPPED HOLES
ANVER Corp. • 36 Parmenter Road • Hudson MA 01749 USA • 978-568-0221 • 800-654-3500 • FAX 978-568-1570 • E-Mail: sales@anver.com • www.anver.com
Vacuum Pumps and Vacuum Generators
Electric Vac-Packs
HEIGHT
115-1-60 X X
16.0 DIA.
(406)
23.86
(606) CONTROL PENDANT
30 GALLON
WITH VACUUM ATTACH
VACUUM
230-1-60 X X X RESERVOIR
AND RELEASE SWITCH
22.0 X 14.25
(4) 0.55 (14) DIA. HOLES
230-3-60 X X X
(559 x 362)
MOUNTING HOLES
VPE24 & VPE48
460-3-60 X X X
575-3-60 X X X
OILESS VACUUM
PUMP & MOTOR RESERVOIR AND MANIFOLD
110-1-50 X X LARGE RED AND GREEN VACUUM GAUGES
PUMP INT. MUFFLER INDICATOR LIGHTS RESETTABLE OVERLOAD
PUMP INT. MUFFLER
PROTECTOR
220-1-50 X X X CLEAR FILTER MASTER POWER ON-OFF
VACUUM COVER
220-3-50 X X X ADJUSTMENT
BALL VALVES
VALVE
1" NPT
(TWO SIDES)
380-3-50 X X X
30 GALLON
440-3-50 X X X VACUUM
RESERVOIR
CONTROL PENDANT
39.00 16.54
575-3-50 X X X (991) (420)
WITH VACUUM ATTACH
AND RELEASE SWITCH
FRONT
22.00
VPE75 (559)
REAR
6021401
Vacuum Pumps and Generators
PMP Series Dry Rotary Vane Vacuum Pumps
6020301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-17
Features:
• Oil free
• Maintenance free
• Operates quietly-maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Built-in particulate filters and silencers
• Compact lightweight design
• Handles vacuum and/or pressure
applications
• Ideal alternative to standard oil sealed
rotary vane pumps
14
25
12
20
10
15 8
6
10
4
5
2
0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
CFM CFM
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 9032301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-17
72
230/460V 1750 1 17 25"
(20)
72
115/230V 1750 1 17 25"
(20)
72
230/460V 1750 1 17 14psig
(20)
72
115/230V 1750 1 17 14psig
(20)
NOTES:
a. Standard voltage for three phase pump is 230/460V 3ph 60Hz
b. Standard voltage for single phase pump is 115/230/1ph 50/60Hz
c. All pumps available in 208V/3ph/60Hz and 575 Volt 50/60 Hz. Contact factory for more information.
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-24
Features:
• Oil free
• Maintenance free
• Operates quietly-maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Built-in particulate filters and silencers
• Compact lightweight design
• Handles vacuum and/or pressure
applications
• Ideal alternative to standard oil sealed
rotary vane pumps
14
25
12
AC
20 10
FM
8
15
SC
FM
10
4
5 2
0
0 0 5 10 15 20 25 30
0 5 10 15 20 25 30 CFM
CFM
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 9032301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-24
3.15 3.15
7.34 7.34
(80) (80)
(186) (186)
2.13 2.13
6.81 (173) 6.81 (173)
(54) (54)
8.94 (277) 8.94 (277)
3.07 3.66
6.06 (154)
(78) (93)
3.54
(90)
9.27
(235) 7.47
(190) 0.18
(5)
8.66 (220)
9.53 (242)
10.74 (273)
12.80 (325)
97
230/460V 1750 1.5 24 27.5"
(44)
97
115/230V 1750 1.5 24 27.5"
(44)
97
230/460V 1750 1.5 24 14psig
(44)
97
115/230V 1750 1.5 24 14psig
(44)
NOTES:
a. Standard voltage for three phase pump is 230/460V 3ph 60Hz
b. Standard voltage for single phase pump is 115/230/1ph 50/60Hz
c. All pumps available in 208V/3ph/60Hz and 575 Volt 50/60 Hz. Contact factory for more information.
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-48
Features:
• Oil free
• Maintenance free
• Operates quietly-maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Built-in particulate filters and silencers
• Compact lightweight design
• Handles vacuum and/or pressure
applications
• Ideal alternative to standard oil sealed
rotary vane pumps
14
25
AC 12
FM
20 10
SC
8
15
FM
6
10
4
5 2
0
0 0 10 20 30 40 50 60
0 10 20 30 40 50 60
CFM
CFM
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 9032301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-48
1" NPT
7.76 (197) 4.37 (111)
ø 0.43 (11)
4.41
(112)
2.36 (60)
1.97
18.39 (467)
0.98 (25) 3.31 (50)
22.32 (567)
2.17 (55) (84)
30.20 (767)
16.22 (412)
3.39 3.66
9.17 (233)
(86) (93)
4.72 (120)
14.73
12.64 (374)
(321)
0)
220
230/460V 1200 3 50 27.5"
(100)
235
115/230V 1200 3 50 27.5"
(107)
220
230/460V 1200 3 50 14psig
(100)
235
115/230V 1200 3 50 14psig
(107)
NOTES:
a. Standard voltage for three phase pump is 230/460V 3ph 60Hz
b. Standard voltage for single phase pump is 115/230/1ph 50/60Hz
c. All pumps available in 208V/3ph/60Hz and 575 Volt 50/60 Hz. Contact factory for more information.
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-75
Features:
• Oil free
• Maintenance free
• Operates quietly-maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Built-in particulate filters and silencers
• Compact lightweight design
• Handles vacuum and/or pressure
applications
• Ideal alternative to standard oil sealed
rotary vane pumps
14
25
12
AC
F M
20 10
8
SC
15
FM
10
4
5 2
0
0 0 20 40 60 80 100 120
0 20 40 60 80 100 CFM
CFM
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 9032301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-75
288
230/460V 1200 5 75 25"
(127)
310
115/230V 1200 5 75 25"
(141)
288
230/460V 1200 5 75 14psig
(127)
310
115/230V 1200 5 75 14psig
(141)
NOTES:
a. Standard voltage for three phase pump is 230/460V 3ph 60Hz
b. Standard voltage for single phase pump is 115/230/1ph 50/60Hz
c. All pumps available in 208V/3ph/60Hz and 575 Volt 50/60 Hz. Contact factory for more information.
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-150
Features:
• Oil free
• Maintenance free
• Operates quietly-maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Built-in particulate filters and silencers
• Compact lightweight design
• Handles vacuum and/or pressure
applications
• Ideal alternative to standard oil sealed
rotary vane pumps
25
AC
F M
20
SC
15 FM
10
0
0 20 40 60 100
CFM
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 0112301
Vacuum Pumps and Vacuum Generators
Dry Rotary Vane Vacuum Pumps / PMP-150
Vacuum Specifications
Motor HP Vacuum Flow lb
Motor RPM Max. in. Hg
(Kw) (CFM) (kg)
450
w/o motor - - 150 27.5"
(205)
522
208-230/460V 1200 10 150 27.5"
(237)
NOTES:
a. Standard voltage for three phase pump is 208-230/460V/3ph 60Hz.
b. Standard voltage for single phase pump is 115/230/1ph 50/60Hz or 115V/1ph 60Hz or 230V/1ph 60Hz.
c. All pumps available in 50Hz frequency, and with other voltages. Contact Factory for more information.
Vacuum Pumps and Generators
Becker Oil Lubricated Rotary Vane Vacuum Pumps
Max. Shipping
Flow Sound
Model Vacuum Speed Oil Qty. Weight
Voltage HP SCFM Level
Number in. Hg RPM Quarts lb
(l/min.) dB
(mm Hg) (kg)
18 29.8 1 92
AFM325-230 230 1.5 66.5 1725
(510) (757) (42)
460 18 29.8 1 92
AFM325-460 1.5 66.5 1725
(510) (757) (42)
2021401
Vacuum Pumps and Generators
Becker Oil Lubricated Rotary Vane Vacuum Pumps
10
0
1 2 10 100 760 TORR
29.92 25 20 15 10 5 0 "Hg
BHP 2.0
1.5
.5
1 150 300 450 600 760 TORR
Specifications
Free Air Displacement [CFM] 60 Hz 18
Motor Capacity 1.5
Speed [RPM] 60 Hz 1725
Sound Level [dB(A)] 60 Hz 66.5
End Vacuum [Torr] - SA 2.0
Weight [Lb] [with motor] 92
Oil Quantity [Qt] 1
Vacuum Pumps and Generators
Small Oil Lubricated Rotary Vane Vacuum Pumps
Performance Curves in Hg
29.83 29.6 29 28 26 22 18 0
CFM 20
AFM21
10
AFM12
10
0
1 2 10 100 760
Torr
8013401
Vacuum Pumps and Generators
Oil Lubricated Rotary Vane Vacuum Pumps
Free Air
Motor Shipping
Displacement Sound End.
Model Capacity Speed Oil Qty. Weight
Voltage 60 Hz Level Vacuum
Number (HP) RPM Quarts lb
SCFM dB Standard
60 Hz (kg)
(l/m)
15 2.0 Torr 42
AFM21-230 230 1.00 62 3600 .05
(425) 29.84” Hg (19)
H
10 H
L
L
0
.5 1 2 10 100 760
Torr
Power Consumption InHg
29.82 25 20 15 10 5 0
BHP 2.0
1.5
40
25
1
.5
0 150 300 450 600 760
Torr
Free Air
Motor Shipping
Displacement Sound End.
Model Capacity Speed Oil Qty. Weight
Voltage 60 Hz Level Vacuum
Number (HP) RPM Quarts lb
SCFM dB Standard
60 Hz (kg)
(l/m)
8013401
Vacuum Pumps and Generators
Medium Oil Lubricated Rotary Vane Vacuum Pumps
2071401
Vacuum Pumps and Generators
Medium Oil Lubricated Rotary Vane Vacuum Pumps
10
0
.5 1 2 10 100 760
Torr
1
0 150 300 450 600 760
Torr
2071401
Vacuum Pumps and Generators
Medium Oil Lubricated Rotary Vane Vacuum Pumps
160
100
10
0
.5 1 2 10 100 760
Torr
Power Consumption InHg
29.82 25 20 15 10 5 0
BHP 4
230
3
160
1
0 150 300 450 600 760
Torr
3.4 142 8 53
VB3HF-S VB3HF SDE-3
(2.53) (4021) (203) (23.5)
5.0 220 12 75
VB4HF-S VB4HF SDE-4
(3.73) (6230) (305) (33.3)
5.0 98 18 94
VB7HV-S VB7HV SDE-7
(3.73) (2775) (457) (41.70)
VB4HF-S 4.8 VB4HF-S-X11D VB4HF-S-X11CD VB4HF-S-X21FG VB4HF 4.8 VB4HF-X11D VB4HF-X11CD VB4HF-X21FG
VB7HV-S 5.0 VB7HV-S-X11D VB7HV-S-X11CD VB7HV-S-X21FG VB7HV 5.0 VB7HV-X11D VB7HV-X11CD VB7HV-X21FG
VB8HF-S 8.5 VB8HF-S-X11D VB8HF-S-X11CD VB8HF-S-X21FG VB8HF 8.5 VB8HF-X11D VB8HF-X11CD VB8HF-X21FG
VB9HV-S 7.5 VB9HV-S-X11D VB9HV-S-X11CD VB9HV-S-X21FG VB9HV 7.5 VB9HV-X11D VB9HV-X11CD VB9HV-X21FG
➨ This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 4040501
Vacuum Pumps and Generators
VB Series Explosion-Proof Regenerative Pump VB3HF
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 73 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
0170301
Vacuum Pumps and Generators
VB Series Explosion-Proof Regenerative Pump VB4HF
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 80 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
0120301
Vacuum Pumps and Generators
VB Series Explosion-Proof Regenerative Pump VB7HV
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
88
95G TEFC 3.50 208-230/415-460 3-60Hz 10.1/5.0 70 dB(A)
(39.9)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
0120301
Vacuum Pumps and Generators
VB Series Explosion-Proof Regenerative Pump VB8HF
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 75 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
0120301
Vacuum Pumps and Generators
VB Series Explosion-Proof Regenerative Pump VB9HV
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 71 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
106
125G TEFC 5.1 208-230/415-460 3-60Hz 14.9/7.5 71 dB(A)
(48.1)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
0180301
Vacuum Pumps and Generators
High Flow RB Series Regenerative Vacuum Pumps
Features:
• Oil and Maintenance Free
• Operates Quietly - as low as 80 dB
• Outboard Bearings increase service life - runs cooler
• Compact, Light-weight design - Easy to Install
• Good for both Vacuum and Pressure Applications
• Ideal Alternative to standard Rotary Vane Pumps
and PD/Rotary Lobe Blowers
• Wired to 230/460 Volts
Max. Shipping
Anver Seimens SCFM Vacuum Wt.
Part Part HP Amps
(l/min.) in. Hg lb
Number Number (mm Hg) (kg)
53 4.5 22
RB-053-05 2BH13007AH16 0.87 2.8 / 1.4
(1500) (114) (10)
106 10.5 59
RB-100-10 2BH14107HH46 3.40 10.0 / 5.0
(3002) (267) (27)
152 12.5 84
RB-122-10 2BH15107HH46 4.60 13.0 / 6.5
(4305) (318) (38)
225 13 154
RB-175-11 2BH16107HH46 8.50 23.0 / 11.5
(6372) (330) (70)
690 9 420
RB-735-08 2BH19007AH16 21.00 48.0 / 24.0
(19540) (229) (191)
780 11 612
RB-750-11 2BH19107HH 27.00 72.0 / 36.0
(22090) (279) (278)
Typical Applications:
• Material Handling • Medical Equipment
• Packaging Machinery • Pneumatic Conveying
• Vacuum Chucking Note: Not Recommended for use with Vacuum Tube Lifting Systems.
• Bagging & Bottling See our Standard VB Series Regenerative Vacuum Stations specifically
• Thermoforming designed for use with vacuum tube lifting systems.
This spec sheet was adapted for print from our website. Additional information and photos are available at www.anver.com. 4041401
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-053-05
Features:
• Cooler running, outboard bearing • Equipped with high quality TEFC
provides virtually maintenance-free motors manufactured by Siemens,
operation in continuous duty service. sized to match your operating
• Environmentally friendly oil-free requirements providing for superior
design prevents downstream power efficiency.
contamination of gas or components. • IP54 with Class F insulation.
• Quiet operation; as low as 61 dB(A) • Quality assured; manufactured in
• Easily mounts in any axle orientation. accordance with ISO 9001.
• Shock absorbing mounting plate • UL Recognized, CE Compliant.
design reduces transmission of DNE VDE 0530
vibration between process machinery
and the blower.
• Thermal overload protection
standard on all models.
208-230/ 60 68 53 22
60 2.8/1.4 .67 3600
415-460 (150) (170) (89) (10)
48 52 46 22
50 220/380/415 2.1/1.1/1.0 .54 3000
(120) (130) (78) (10)
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9052301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-059-08
Features:
• Cooler running, outboard bearing • Equipped with high quality TEFC
provides virtually maintenance-free motors manufactured by Siemens,
operation in continuous duty service. sized to match your operating
• Environmentally friendly oil-free requirements providing for superior
design prevents downstream power efficiency.
contamination of gas or components. • IP54 with Class F insulation.
• Quiet operation; as low as 66 dB(A) • Quality assured; manufactured in
• Easily mounts in any axle orientation. accordance with ISO 9001.
• Shock absorbing mounting plate • UL Recognized, CE Compliant.
design reduces transmission of DNE VDE 0530
vibration between process machinery
and the blower.
• Thermal overload protection
standard on all models.
110 135 59 37
60 230/460 5.6/2.8 1.88 3600
(280) (335) (100) (17)
110 110 50 37
50 200/400 5.8/2.9 1.6 3000
(280) (270) (85) (17)
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9052301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-100-10
Features:
• Cooler running, outboard bearing • Equipped with high quality TEFC
provides virtually maintenance-free motors manufactured by Siemens,
operation in continuous duty service. sized to match your operating
• Environmentally friendly oil-free requirements providing for superior
design prevents downstream power efficiency.
contamination of gas or components. • IP54 with Class F insulation.
• Quiet operation; as low as 69 dB(A) • Quality assured; manufactured in
• Easily mounts in any axle orientation. accordance with ISO 9001.
• Shock absorbing mounting plate • UL Recognized, CE Compliant.
design reduces transmission of DNE VDE 0530
vibration between process machinery
and the blower.
• Thermal overload protection
standard on all models.
110 150 85 59
50 200/400 10.0/5.0 2.95 3000
(280) (375) (155) (27)
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9052301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-122-10
Features:
• Cooler running, outboard bearing • Equipped with high quality TEFC
provides virtually maintenance-free motors manufactured by Siemens,
operation in continuous duty service. sized to match your operating
• Environmentally friendly oil-free requirements providing for superior
design prevents downstream power efficiency.
contamination of gas or components. • IP54 with Class F insulation.
• Quiet operation; as low as 77 dB(A) • Quality assured; manufactured in
• Easily mounts in any axle orientation. accordance with ISO 9001.
• Shock absorbing mounting plate • UL Recognized, CE Compliant.
design reduces transmission of DNE VDE 0530
vibration between process machinery
and the blower.
• Thermal overload protection
standard on all models.
9062301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-175-11
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 79 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9003301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-330-14
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 75 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9003301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-735-08
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 80 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
9003301
Vacuum Pumps and Generators
RB Series High Flow Regenerative Pump RB-750-11
Features:
• Cooler running, outboard bearing • Thermal overload protection
provides virtually maintenance-free standard on all models.
operation in continuous duty service. • Equipped with high quality TEFC
• Environmentally friendly oil-free motors manufactured by Siemens,
design prevents downstream sized to match your operating
contamination of gas or components. requirements providing for superior
• Quiet operation; as low as 80 dB(A) power efficiency.
• Easily mounts in any axle orientation. • IP54 with Class F insulation.
• Shock absorbing mounting plate • Quality assured; manufactured in
design reduces transmission of accordance with ISO 9001.
vibration between process machinery • UL Recognized, CE Compliant.
and the blower. DNE VDE 0530
NOTES:
A) Performance tolerance is ±10%.
B) Performance curves are based on an air temperature of 60° F (15° C) at the inlet connection
and 29.92 Hg abs (1013 mbar) at the discharge connection.
Specification and performance data are subject to change without notice. Please contact factory for specification updates.
0110301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Vacuum Pumps
In order to remain a leader in the vacuum equipment field, ANVER is constantly expanding its
range of products. We are pleased to announce the addition of nine new models in our High
Vacuum / Pressure Regenerative Pump line. Our close relationship with Siemens® allows us
to offer these high quality pumps at extremely competitive prices. These pumps are suitable
for a variety of vacuum and pressure applications. However, they are not recommended for
Vacuum Tube Lifting Systems.
Features:
• Oil and Maintenance Free
• Operates Quietly - maximum 72 dB
• Outboard Bearings increase service life - runs cooler
• Compact, Light-weight design - Easy to Install
• Good for both Vacuum and Pressure Applications
• Ideal Alternative to standard Rotary Vane Pumps
and PD/Rotary Lobe Blowers
Models: RB-036-11, RB-050-13, RB-061-12 • Can be wired at either 208-230 or 415-460
Max. Shipping
Anver Seimens
SCFM Vacuum Rated Wt.
Part Part HP
(l/min.) in. Hg Amps lb
Number Number
(mm Hg) (kg)
35 8 35
RB-035-08 2BH7210OAK127 0.85 3.2 / 1.6
(991) (203) (16)
35 12 52
RB-036-11 2BH7220OAH267 1.26 4.2 / 2.1
(991) (304) (24)
50 8 35
RB-050-09 2BH7310OAK127 0.80 3.2 / 1.6
(1416) (203) (16)
50 13 62
RB-050-13 2BH7320OAK42 1.75 5.4 / 2.7
(1416) (330) (28)
65 10 51
RB-062-10 2BH7410OAH167 1.75 6.2 / 3.1
(1841) (254) (23)
61 13 73
RB-061-12 2BH7420OAH26 2.40 7.0 / 3.5
(1727) (330) (33)
90 11 57
RB-090-11 2BH7510OAH168 2.35 7.2 / 3.6
(2549) (279) (26)
120 11 71
RB-119-11 2BH7610OAK12 3.50 10.7 / 5.4
(3398) (279) (32)
120 20 104
RB-120-20 2BH7630OAH6682 7.60 20.0 / 10.0
(3398) (508) (47)
Models: Model:
RB-035-08 RB-120-20
RB-050-09
RB-062-10,
RB-090-11
RB-119-11
4041401
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-035-08
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
110 8
100
7
90
6
80
2G
70 5
60
4
50
40 3
30
2
20
1
10
0 0
0 10 20 30 40
CFM
35
2G TEFC 0.85 208-230/415-460 3-60Hz 3.2/1.6 62 dB(A)
(15.9)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9061301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-036-11
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
52
6G TEFC 1.26 208-230/415-460 3-60Hz 4.2/2.1 62 dB(A)
(23.6)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9061301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-050-09
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
110 8
100
7
90
6
80 31G
70 5
60
4
50
40 3
30
2
20
1
10
0 0
0 10 20 30 40 50 60 70 80 90
CFM
35
31G TEFC 0.80 208-230/415-460 3-60Hz 3.2/1.6 62 dB(A)
(15.9)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9061301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-050-13
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
62
35G TEFC 1.75 208-230/415-460 3-60Hz 5.4/2.7 62 dB(A)
(28.1)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9022301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-062-10
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
9
120
8
100
7
61G
80 6
5
60
4
40 3
2
20
1
0 0
0 20 40 60 80 100
CFM
51
61G TEFC 1.75 208-230/415-460 3-60Hz 6.2/3.1 62 dB(A)
(15.9)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9022301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-061-12
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
73
65G TEFC 2.40 208-230/415-460 3-60Hz 7.0/3.5 66 dB(A)
(33.1)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9022301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-090-11
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
11
140
10
120 9
8
100
91G 7
80 6
5
60
4
40 3
2
20
1
0 0
0 10 20 30 40 50 60
CFM
35
91G TEFC 2.35 208-230/415-460 3-60Hz 7.2/3.6 68 dB(A)
(15.9)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9032301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-119-11
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
12
160
11
140 10
9
120
121G 8
100 7
80 6
5
60
4
40 3
2
20
1
0 0
0 20 40 60 80 100 120 140
CFM
71
121G TEFC 3.5 208-230/415-460 3-60Hz 10.7/5.4 71 dB(A)
(32.2)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9032301
Vacuum Pumps and Generators
High Vacuum RB Series Regenerative Pump RB-120-20
Features:
• Oil free
• Maintenance free
• Operates quietly - maximum 70 dB (A)
• Cooler running outboard bearings
increase service life
• Easy to install, close-coupled construction
• Compact lightweight design
• Ideal alternative to standard rotary vane pumps
and PD/rotary lobe blowers
120 9
8
100 7
80 6
5
60
4
40 3
2
20
1
0 0
0 20 40 60 80 100 120 140 160 180
CFM
104
161G TEFC 7.5 208-230/415-460 3-60Hz 20/10 72 dB(A)
(47.2)
NOTES:
A) Standard voltage for three phase blowers is 208-230/415-460V 3ph/ 60Hz.
B) Standard voltage for single phase blowers is 115/230/1ph/50/60Hz or 115V/1ph/60Hz or 230V/1ph/60Hz.
C) AII blowers available in 50Hz frequency and with other voltages.
D) All blowers operate at 3600 RPM.
Specifications subject to change without notice. • Please contact factory for specification updates.
9042301
Vacuum Pumps and Generators
Water-Cooled Electric Vacuum Pumps
TCP Series
Manufactured by Siemens®, the ANVER TCP Series Electric Vacuum Pumps
are ideal alternatives to rotary vane vacuum pumps. This revolutionary prod-
uct is remarkably easy to use... just plug it in and let it run. Take a close look
at the TCP's features and you'll agree that vacuum technology has taken a
giant leap forward. With an operating temperature that stays below 110° F
(43° C), the patented TCP cools exhausted air below the intake temperature
and dries it at the same time. Cool, clean air is the only thing discharged.
Condensed water returns to the internal water system, so there is no need for
an external water supply. An optional Overflow/Make-Up Valve automatically
adds or drains water in order to keep the appropriate level at all times.
Principle of Operation
Heat is removed from the closed loop water circuit by an air-cooled heat
exchanger. A small amount of water from the closed loop water circuit is
injected at the inlet of the TCP vacuum pump. Under vacuum, this stream is
vaporized and, as a result, the inlet air to the pump is cooled. Utilizing a shell
Typical Application and tube heat exchanger, the cooled inlet air in turn cools the exhaust air
• Ground Water Extraction stream. Water vapor in the exhaust air is condensed and returned to the sep-
• Food and Pharmaceutical Packaging arator tank.
• Thermoforming
• Rubber Molding Features:
• Medical and Anesthesia Evacuation • Oil free
• Pick and Place • Maintenance free
• Vacuum Routing • Self-contained internal water circuit
• Pneumatic Vacuum Conveying • Compact, quiet, cool running
• Central Vacuum Systems • Capacity of 20 to 180 cfm; generates 28.5 inches of Hg Vacuum
• Insensitive to dust and water vapor
• Discharges totally clean air
1.4 28.5 20
TCP-20 200-275 / 345-480 5.6 / 2.8 66 95
(1.0) (724) (566)
(43)
2.2 28.5 40
TCP-35 200-275 / 345-480 7.2 / 3.6 67 130
(1.6) (724) (1133)
(59)
191
4.7 28.5 50
TCP-50 200-275 / 345-480 13.2 / 6.6 72 (87)
(3.5) (724) (1416)
232
6.8 28.5 80
TCP-80 200-275 / 345-480 21.0 / 11.0 73 (105)
(5.1) (724) (2266)
396
7.5 28.5 105
TCP-105 208-230 / 415-480 22.0 / 11.0 71 (180)
(5.6) (724) (2973)
408
10 28.5 140
TCP-140 208-230 / 415-480 27.8 / 13.9 73 (185)
(7.5) (724) (3964)
506
15 28.5 180
TCP-180 208-230 / 415-480 42.0 / 21.0 73 (229)
(11.2) (724) (5047)
8011401
Vacuum Pumps and Generators
Water-Cooled Electric Vacuum Pumps
a b c f g h1 h2 h3 i1 i2 j k l m1 m2
Item
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
23.7 15.4 17 13.6 14.6 1 8.3 10.7 18.2 19.1 4.8 2.8 3.1 4.8 4.6
TCP-20
(602) (390) (432) (345) (370) (25) (210) (272) (463) (486) (121) (70) (80) (122) (116)
29.2 17.2 22.5 17.7 19.5 1 8.6 10.9 20.6 21.8 7 4.3 3.3 6.4 4.7
TCP-35
(743) (436) (572) (450) (495) (25) (218) (278) (522) (553) (178) (108) (85) (162) (120)
30.0 17.2 22.5 17.7 19.5 1 8.6 10.9 20.6 21.8 7 4.3 3.3 6.4 4.7
TCP-50
(761) (436) (572) (450) (495) (25) (218) (278) (522) (553) (178) (108) (85) (162) (120)
36.4 20.1 26.9 22.4 23.0 1 7.0 9.4 23.8 25.0 4.1 6.9 3.5 8.9 6.4
TCP-80
(920) (511) (682) (570) (585) (25) (179) (239) (605) (636) (104) (174) (90) (225) (162)
1.6 1.4 15 2.5 5.8 10.0 10.8 G3/4" ø1.2 S2.2 x 0.16 S2.2 x 0.16
TCP-20 G1"
(40) (36) (380) (63) (148) (255) (274) (G3/4" ø30) (S56 x 4) (S56 x 4)
1.4 1.5 20.2 4.3 7.1 12.4 13.5 G1-1/4" ø2 S2.2 x 0.16 S2.2 x 0.16
TCP-35 G1"
(35) (39) (514) (108) (180) (314) (342) (G1-1/4" ø50) (S56 x 4) (S56 x 4)
1.4 1.5 20.2 4.3 13.4 14.4 16.5 G1-1/4" ø2 S2.2 x 0.16 S2.2 x 0.16
TCP-50 G1"
(35) (39) (514) (108) (341) (367) (419) (G1-1/4" ø50) (S56 x 4) (S56 x 4)
1.4 1.9 22.0 3.2 13.4 14.4 16.5 G1-1/4" ø2 S2.2 x 0.16 S2.2 x 0.16
TCP-80 G1"
(35) (49) (559) (81) (341) (367) (419) (G1-1/4" ø50) (S56 x 4) (S56 x 4)
8011401
Vacuum Pumps and Generators
Water-Cooled Electric Vacuum Pumps
a b c f g h1 h2 i j k l m
Item
in. in. in. in. in. in. in. in. in. in. in. in.
Number
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
43.3 24.8 33.3 29.7 28.5 1.2 13.1 27.9 9.4 4.7 3.5 12.2
TCP-105
(1100) (630) (845) (755) (725) (30) (335) (710) (240) (120) (90) (310)
43.3 24.8 33.3 29.7 28.5 1.2 13.1 27.9 9.4 4.7 3.5 12.2
TCP-140
(1100) (630) (845) (755) (725) (30) (335) (710) (240) (120) (90) (310)
43.3 24.8 33.3 29.7 28.5 1.2 11.6 27.9 9.4 4.7 3.5 12.2
TCP-180
(1100) (630) (845) (755) (725) (30) (295) (710) (240) (120) (90) (310)
1.4 2.4 29.8 13.2 15.9 21.6 2.5 S2.2 x 0.16 S2.2 x 0.16
TCP-105 G1" G1/8"
(35) (60) (757) (335) (406) (548) (63) (S56 x 4) (S56 x 4)
1.4 2.4 29.8 13.2 15.9 21.6 2.5 S2.2 x 0.16 S2.2 x 0.16
TCP-140 G1" G1/8"
(35) (60) (757) (335) (406) (548) (63) (S56 x 4) (S56 x 4)
1.4 2.4 29.8 13.2 15.9 21.6 2.5 S2.2 x 0.16 S2.2 x 0.16
TCP-180 G1" G1/8"
(35) (60) (757) (335) (406) (548) (63) (S56 x 4) (S56 x 4)
8011401
Vacuum Pumps and Vacuum Generators
Vacuum Pump Accessories
Sound Enclosures for Vacuum Pump and Vacuum Stations
ANVER Vacuum Tube Lifting Systems use vacuum pumps and vacuum stations that
already meet OSHA guidelines for noise levels. For added comfort or for use where
low noise is desired as a premium, sound deadening enclosures are available in
most common sizes.
As a general rule, sound enclosures reduce sound by 5-7 dB for vacuum pumps
operating in the 68-76 dB range. Although this may seem vague, it is true since
sound readings can vary by this amount simply by changing the location where you
are standing when you are taking the sound readings.
ANVER sound deadening enclosures are built
from durable, melt-resistant, industrial-quality
plastic. They have a steel plate base and are fully
lined with sound deadening foam. It is best to
obtain these enclosures when you purchase the
vacuum station as they require special plumbing: the intake and exhaust pipes need to be lengthened to 7/16" (11 mm) DIA.
MOUNTING HOLES
port correctly. D
E
The following enclosure sizes are available from stock. Note that the pricing is for the sound enclosure
when sold with the vacuum station. When sold separately, extra pipe fittings, though a small amount,
must be added. Check with the factory for details.
A B C D E
ANVER Item No. in. in. in. in. in.
(mm) (mm) (mm) (mm) (mm)
33.00 24.00 21.50 N/A N/A
SDE-3
(838) (610) (545)
27.50
ANVER Item No. (699)
27.50
(699)
35.00
(889)
ST-W1 18.25
(464) 38.56
(979)
7091401
Vacuum Pumps and Vacuum Generators
Motor Starters and Protectors for Vacuum Pumps
ANVER Motor Starters are made for us in Germany to the highest quality
standards. The motor circuit controller combines the function of:
• Short circuit protection
• Thermal overload protection
• Switching and
• Signaling
ANVER starters can eliminate the need for larger and more expensive fuse
blocks and fused disconnects, or circuit breakers.
ANVER starters offer a wide application range, from 0.1 to 90 FLA in installa-
tions up to 600 V. For group motor applications, ANVER starters have up to
2000A group installation rating, one of the highest in the industry.
ANVER starters are also excellent as manual motor starters that employ all of the same motor protection features in one compact
unit. ANVER starters are available in a variety of enclosures including general purpose, watertight and explosion-proof (the most com-
pact on the market today).
In the event of a short-circuit, the contacts are opened by magnetic, non-adjusting tripping elements in times approaching 1/1000 of a
second. Because of this superb current limiting capability, ANVER starters have a short-circuit capacity of up to 42kA at 600 V.
Because each ANVER starter is individually calibrated at the factory for the smallest and largest current, very accurate thermal over-
load protection is also obtained. In addition, ANVER starters are Class 10 devices - they trip within 10 seconds under a locked rotor
condition (6 X FLA). Each motor starter must be ordered with an enclosure Part Number ST-ENCL).
2051501
Vacuum Pumps and Vacuum Generators
Motor Starters and Protectors for Vacuum Pumps
Hose
ANVER
HP Starter No. Voltage Amps Port Size in.
Pump No.
(mm)
ST-100-160 208-230 10
1-1/2
VB3HF 3.4 ST-040-063 460 5 1-1/4"NPT
(38.1)
ST-040-063 575 4
ST-200-250 208-230 24
2
VB8HF 8.5 ST-100-160 460 12 2" NPT
(50.8)
ST-100-160 575 9.6
2051501