Академический Документы
Профессиональный Документы
Культура Документы
BUILDING WORKS
Volume I
BASIC RATES
(LABOUR, MATERIAL & MACHINERY)
BADULLA
SCHEDULE OF RATES FOR
BUILDING WORKS
Volume I
This volume of schedule rate for building works shall be used for the contracts which get done from Approved
Societies in Divisional Secretariat office of relevant area, School Development Societies and Direct Labours.
BADULLA
DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019 (With VAT)
CONTENTS
A Demolisher 25 - 26
B Excavator 26 - 27
C Concreter 28 - 30
D Formwork 30 - 31
E Reinforcement 31
F Brick Layer 32 - 33
G Masonry Work 34
H Pavior 34 - 35
J Tiler 35 - 37
K Roofer 38 - 42
M Brass Founder 46 - 48
N Iron Monger 48 - 49
P Aluminium Worker 50 - 58
Q Glazier 59
R Plasterer 59 - 60
S Plumber 61 - 62
T Sanitary Fittings 63 - 66
U Roof Plumber 66 - 67
V Tinker 67
W Drain Layer 67 - 68
Y Electrical Installations 71 - 78
Z Miscellaneous Work 78 - 79
Attachment: Badulla and Monaragala Discricts Transport
PROVINCIAL DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019
GENERAL INSTRUCTIONS
- Quality of Materials
Materials having SLS certificate should always be used for construction works (eg. for cement, PVC pipes,
electrical wires, asbestos sheets, etc). In cases where SLS has not been specified for a particular type of material (eg.
for aluminium extrusions) the quality of the material should be approved by the engineer. Prices of Sanitary and
Electrical fittings shall aproximately be matched with basic prices which is attached herewith.
Prices of Sanitary and Electrical fittings etc. shall aproximately be matched with basic prices which is attached
herewith.
(b) Transport
Transportation cost of materials are included to the cost of materials except for Bricks, Cement, Sand,
Metal, Rubble and Soil. When preparing estimates transport cost should be added only for the above
mentioned materials according to the following table and the rates given in this table . (By Lorry)
Table: 01
Rate / (Rs.)
Material
Unit Quantity 0~1km 1~10km >10km Loading Unloading
Bricks Nr 1,000 500.00 55.00 49.10 700.00
Instructions Page 1
PROVINCIAL DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019
GENERAL INSTRUCTIONS
Rate / (Rs.)
Material
Unit Quantity 0~1km 1~10km >10km Loading Unloading
Bricks Nr 1,000 720.00 110.00 95.00 430.00
Cement Block Nr 350 960.00 120.00 110.00 525.00
(c) Labour
The quantity of labour required for the items are computed from known data and experience.
(d) Plant
This component provides for the minimum plant required for the items of work. The cost of tools and
implements is provided in the overhead allowances
Overhead factor shall include the items which can not be included under preliminary.
Instructions Page 2
PROVINCIAL DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019
GENERAL INSTRUCTIONS
Table: 03
Description First Floor Second Floor Third Floor
Concrete Work 3% 5% 7%
Formwork 3% 5% 7%
Reinforcement 3% 5% 7.5%
Brickwork 5% 7% 10%
Asbestos Roof 3% 5% 7%
Zink Aluminium Roof 3% 5% 7%
Roof Plumbing 3% 5% 7%
Ceiling 3% 5% 7%
Wall Tiling 2% 4% 6%
Floor Tiling 2% 4% 6%
Painting 3% 6% 9%
Diameter
Weight/ (kg/m)
/(mm)
6 0.222
8 0.395
10 0.617
12 0.888
16 1.578
20 2.466
25 3.853
32 6.313
Instructions Page 3
PROVINCIAL DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019
GENERAL INSTRUCTIONS
(b) Imperial to Metric Conversion table
Table: 05
From Imperial To Metric
Multiplicati
rate Rate
on factor
Cube m3 0.353
Square m2 0.1075
Sq.ft m2 10.7584
L.ft m 3.28
(c) Multification Factors for Calculation of Painting Areas of Doors and Windows
Table: 06
Multification
Description
Factor
(d) Standard Norms for Calculation of Transport Costs are Some Important Items
Table: 07
Cement Sand Metal Rubble Bricks
Description Unit
(50kg) (m3) (m3) (m3) (Nr)
Instructions Page 4
PROVINCIAL DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019
Mode of payment to be mutuaaly agreed between contractor and the employer at the
F
commencement of contract in relation to the program of work.
3 The above recommended percentage may be adjusted by the Employer/Consultant to suit the
particular project.
4 The tenderer is advised to visit the site of the proposed work, as it is his responsibility to ascertain
the conditions,govering access to the site, external working space, storage area, status of the
adjoining properties etc.
Mode of Amount
Item Description Unit
payment Rs. Cts.
A - PRELIMINARIES
Mode of Amount
Item Description Unit
payment Rs. Cts.
A - PRELIMINARIES
Engineer's Facilities
Contractor's Facilities
Allow lump sum for giving notices, obtaining permits & payment
9 of fee in compliance with the requirements of government, local E Item
authority or other public authority.
Setting Out
Mode of Amount
Item Description Unit
payment Rs. Cts.
A - PRELIMINARIES
Engineer's Facilities
Contractor's Facilities
Allow lump sum for giving notices, obtaining permits & payment
9 of fee in compliance with the requirements of government, local E Item
authority or other public authority.
Setting Out
Volume I
BADULLA
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
LABOUR
101 Skilled Labour day 1,900.00 1,900.00
102 Semiskilled Labour day 1,500.00 1,500.00
103 Unskilled Labour day 1,400.00 1,400.00
104 Mason day 2,050.00 2,050.00
105 Carpenter day 2,050.00 2,050.00
106 Plumber day 2,050.00 2,050.00
107 Painter day 2,050.00 2,050.00
108 Welder day 2,150.00 2,150.00
109 Bar Bender day 2,050.00 2,050.00
110 Alluminium Worker day 2,150.00 2,150.00
111 Work Supervisor day 1,525.00 1,525.00
112 Electrician day 2,050.00 2,050.00
MACHINES (With fuel)
201 Concrete Mixer (400lts) day 4,500.00 4,500.00
202 Porker vibrator with Operator day 3,000.00 3,000.00
203 Vibrating roller (one ton) day 4,000.00 4,000.00
204 Tractor (1 Cube) with Tailer day 6,000.00 6,000.00
205 Excavator mobile DC 120 Hour 5,000.00 5,000.00
day(8
206 Ten wheeler (km 100) 15,000.00 15,000.00
hrs)
day(8
207 Lorry/ Tipper/1cube 8,000.00 8,000.00
hrs)
day(8
208 Lorry/ Tipper/2cube 10,000.00 10,000.00
hrs)
day(8
209 Chain saw (with operator) 6,000.00 6,000.00
hrs)
210 Bachoe loader (HP 92) Hour 2,500.00 2,500.00
211 Air Compressor 250CFM Hour 2,000.00 2,000.00
Welding plant with Diesel Generator (including
212 day 6,000.00 6,000.00
operator)
213 Welding plant(Electrical) day 750.00 750.00
214 Tractor Water Bowser - 2800l day 5,750.00 5,750.00
215 Lorry Water Bowser - 6000l day 6,200.00 6,200.00
MATERIALS
Earth Work
301 Baskets Nr 200.00 200.00
302 Gravel m³ 700.00 700.00
303 Earth m³ 402.50 402.50
304 Blasting powder kg 649.75 6.50 656.25
305 Safety fuse m 42.55 0.43 42.98
306 Detonators (normal) 9m Nr 128.80 1.29 130.09
307 Quarry dust m³ 1,400.00 1,400.00
308 Aggregate Base course (ABC) m³ 2,000.00 2,000.00
Concrete Work
401 Sand m³ 3,100.00 3,100.00
402 Cement bag 1,094.00 1,094.00
403 Metal 50mm m³ 2,300.00 2,300.00
404 Metal 38mm m³ 2,300.00 2,300.00
405 Metal 25mm m³ 2,650.00 2,650.00
406 Metal 20mm m³ 2,750.00 2,750.00
407 Metal 12.5mm m³ 2,750.00 2,750.00
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
Formwork
501 Shuttering planks - 25mm thick m² 609.50 6.10 615.60
502 Plywood sheets - 18mm thick m² 1,546.75 15.47 1,562.22
503 Round timber 3m (4' - 6' Ǿ) Nr 302.45 3.02 305.47
504 Bamboo 3m Nr 250.00 2.50 252.50
505 100mmx50mm class II timber m 289.80 2.90 292.70
506 50mmx50mm class II timber m 155.25 1.55 156.80
507 Nail kg 197.80 1.98 199.78
508 Mould oil l 108.10 1.08 109.18
509 10mm dia. 450mm bolts Nr 105.80 1.06 106.86
510 Plywood sheets - 15mm thick m² 1,209.80 12.10 1,221.90
Reinforcement
601 Steel MS - 6mm kg 157.55 1.58 159.13
602 Steel MS - >6mm kg 159.85 1.60 161.45
603 Steel TS kg 159.85 1.60 161.45
604 Binding wire kg 163.30 1.63 164.93
605 Welding rods kg 264.50 264.50
Brick / Cement Block Work
701 Bricks 220x105x65mm Nr 13.60 13.60
702 Wire cut bricks Nr 30.00 30.00
703 Batik bricks Nr 31.00 31.00
704 Bricks 220x105x100mm Nr 16.00 16.00
705 Bricks 220x150x100mm Nr 17.00 17.00
25 N/mm² interlocking blocks
707 Nr 31.60 31.60
(220mmx110mmx80mm)
40N/mm² interlocking blocks
708 Nr 38.70 38.70
(220mmx110mmx80mm)
709 Solid cement block ( 390mm x 150mm x 190mm) Nr 93.00 0.93 93.93
710 Solid cement block ( 390mm x 100mm x 190mm) Nr 62.00 0.62 62.62
711 Hollow cement block( 390mm x 150mm x 190mm) Nr 75.50 0.76 76.26
712 Hollow cement block( 390mm x 200mm x 190mm) Nr 84.60 0.85 85.45
Masonry
801 150x225mm Rubble m³ 1,200.00 1,200.00
802 DPC Tar l 63.02 0.63 63.65
Pavior
Antitermite treatment - Sub contractors rate
901 m² 264.50 264.50
(Lankem) 10 Year warranty
902 Water proofing - Sub contractors rate 5 Year warranty m² 1,250.05 1,250.05
903 Gauge 1000 polythene m² 105.00 0.91 105.91
904 Crystaline waterproofing material kg 322.58 322.58
Tiller
1001 100x100 glazed wall tiles Nr Deleted Deleted
1002 150x150 glazed wall tiles Nr Deleted Deleted
1003 200x300 glazed wall tiles Nr Deleted Deleted
1003B 200x400 glazed wall tiles Nr Deleted Deleted
1004 300x400 glazed wall tiles Nr 265.00 2.65 267.65
1004B 300x600 glazed wall tiles Nr 500.00 5.00 505.00
1006 300x300 non skid floor tiles Nr 175.00 1.75 176.75
1007 450x450 non skid floor tiles Nr 460.00 4.60 464.60
1009 300x300 non skid floor tiles - Homogeneous Nr 229.00 2.29 231.29
300x300 non skid floor tiles - Homogeneous (Semi
1010 Nr 230.00 2.30 232.30
Glazed/Matt)
1011 300x300 floor tiles - Glazed Nr 148.00 1.48 149.48
1012 300x300 floor tiles - Matt Nr 163.00 1.63 164.63
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1013 400x400 non skid floor tiles - Homogeneous Nr 426.00 4.26 430.26
400x400 non skid floor tiles - Homogeneous (Semi
1014 Nr 411.00 4.11 415.11
Glazed/Matt)
1015 400x400 floor tiles - Glazed Nr 289.00 2.89 291.89
1016 400x400 floor tiles - Matt Nr 322.00 3.22 325.22
1017 450x450 floor tiles - Matt Nr 470.00 4.70 474.70
1018 600x600 floor tiles - Matt Nr 1,266.00 12.66 1,278.66
1019 600x600 floor tiles - Polished Nr 1,600.00 16.00 1,616.00
1020 600x400 floor tiles - Matt Nr 697.00 6.97 703.97
1021 600x300 floor tiles - Homogeneous Nr 726.00 7.26 733.26
1022 600x300 floor tiles - Glazed (polished) Nr 696.00 6.96 702.96
1023 600x600 Polished - Homogeneous Nr 1,382.00 13.82 1,395.82
1024 800x800 Polish Porcelain tile - Chinese Nr 2,468.00 24.68 2,492.68
1025 PVC tile beading m 70.00 0.70 70.70
1026 Stainless steel tile beading m 140.00 1.40 141.40
1027 100mm high Timber Skirting m 239.00 2.39 241.39
1028 600x600 - Homogeneous Nr 1,231.00 12.31 1,243.31
1030 600x300 semi Glazed Nr 603.00 6.03 609.03
1031 900x450 Matt Nr 1,429.00 14.29 1,443.29
1032 900x450 polished Nr 1,810.00 18.10 1,828.10
1033 500x500 glazed Nr 760.00 7.60 767.60
1034 500x500 Matt Nr 767.00 7.67 774.67
1035 500x500 Polished Nr 921.00 9.21 930.21
Roofer
1101 Special class timber (microcorys) m³ 145,498.00 1,454.98 146,952.98
1102 50mmx25mm special class timber m 79.00 0.79 79.79
1103 50mmx50mm special class timber m 252.00 2.52 254.52
1104 100mmx50mm special class timber m 725.00 7.25 732.25
1105 100mmx75mm special class timber m 1,107.00 11.07 1,118.07
1106 125mmx50mm special class timber m 919.00 9.19 928.19
1107 125mmx75mm special class timber m 1,396.00 13.96 1,409.96
1108 150mmx50mm special class timber m 1,113.00 11.13 1,124.13
1109 150mmx75mm special class timber m 1,735.00 17.35 1,752.35
1110 Asbestos sheet m² 710.00 7.10 717.10
1111 Roofing screws 112mm& washer Nr 23.00 23.00
1112 Wood preservative l 286.00 2.86 288.86
1113 J bolt and nut 300mm Nr 20.00 20.00
1114 12mm bolt and nut (Grade M8.8 ) Nr 38.00 38.00
1115 50x50x5.8mm angle irons (S275) m 559.00 5.59 564.59
1116 62.5x62.5x5.8mm angle irons (S275) m 890.00 8.90 898.90
1117 75x75x5.8mm angle irons (S275) m 1,199.00 11.99 1,210.99
1118 6'-0" asbestos sheets Nr 1,327.00 13.27 1,340.27
1119 8'-0" asbestos sheets Nr 1,906.00 19.06 1,925.06
1120 10'-0" asbestos sheets Nr 2,073.00 20.73 2,093.73
1121 12'-0" asbestos sheets Nr 2,567.00 25.67 2,592.67
1122 100x50x12 "C" channels 2mm thick m 829.00 8.29 837.29
1122A 75x38x12 "C" channels 2mm thick m 744.00 7.44 751.44
1122B 150x65x12 "C" channels 2mm thick m 1,613.00 16.13 1,629.13
1123 0.47mm tk. Zn-alum metal roofing sheets m² 1,050.00 10.50 1,060.50
1124 Fasteners Nr 20.00 0.20 20.20
1125 Roof tiles Nr 100.00 1.00 101.00
1126 Ridge tiles Nr 84.00 0.84 84.84
1127 5mm thick gusset plate m² 7,405.00 74.05 7,479.05
1128 Zink Alluminium ridge capping of girth 470mm m 415.00 4.15 419.15
1129 Asbestos ridges "V" shape Nr 493.00 4.93 497.93
1129A Asbestos ridges pair 1,214.00 12.14 1,226.14
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1130 Lime kg 25.00 0.25 25.25
Double side 3 - 4 mm thickness Aluminium foil as
1131A m² 178.00 1.78 179.78
heat insulation
1132 3"x 3" (Gauge 17) Mesh m² 129.00 1.29 130.29
1133 10 mm gusset plate m² 7,560.00 75.60 7,635.60
1134 Truss plate, base plate (10 mm thick) m² 8,320.00 83.20 8,403.20
1135 Class I timber m³ 75,679.00 756.79 76,435.79
1136 50mmx25mm class I timber 4.m &below m 54.00 0.54 54.54
1137 50mmx50mm class I timber m 173.00 1.73 174.73
1138 100mmx50mm class I timber m 431.00 4.31 435.31
1139 100mmx75mm class I timber m 553.00 5.53 558.53
1140 125mmx50mm class I timber m 460.00 4.60 464.60
1141 125mmx75mm class I timber m 697.00 6.97 703.97
1142 150mmx50mm class I timber m 553.00 5.53 558.53
1143 150mmx75mm class I timber m 865.00 8.65 873.65
1144 Imported treated timber m³ 125,516.00 1,255.16 126,771.16
1145 0.30mm thick sandwich panel sheet m² Deleted Deleted
1146 Gable cap m Deleted Deleted
1147 10 x75mm Bolt and nut Kg 567.00 5.67 572.67
1148 Catloy paste Kg 790.00 7.90 797.90
1149 ASA Roofing sheets m² 1,520.00 15.20 1,535.20
1150 Self tapping Screw with water proof cap nr 39.00 39.00
1151 Top Ridge m 820.00 8.20 828.20
1152 End of Ridge nr 300.00 3.00 303.00
1153 Hip Ridge nr 660.00 6.60 666.60
1154 Three way ridge nr 750.00 7.50 757.50
1155 Wall flashing board m 587.00 5.87 592.87
1156 50mmx50mm Imported treated timber m 265.00 2.65 267.65
1157 100mmx50mm Imported treated timber m 716.00 7.16 723.16
1158 100mmx75mm Imported treated timber m 1,094.00 10.94 1,104.94
1159 125mmx50mm Imported treated timber m 1,019.00 10.19 1,029.19
1160 125mmx75mm Imported treated timber m 1,433.00 14.33 1,447.33
1161 150mmx50mm Imported treated timber m 1,075.00 10.75 1,085.75
1162 150mmx75mm Imported treated timber m 1,886.00 18.86 1,904.86
1163 150mmx100mm Imported treated timber m 2,923.00 29.23 2,952.23
Carpenter and Joiner
1201 31mm planks special class m² 3,416.00 34.16 3,450.16
1202 25mm planks special class m² 2,734.00 27.34 2,761.34
1203 20mm planks special class m² 2,346.00 23.46 2,369.46
1204 20mm thick lunumidella timber m² 850.00 8.50 858.50
1205 50mm iron screws Nr 5.00 0.05 5.05
1206 G.I. clout nails 20mm kg 500.00 5.00 505.00
1207 Asbestos Ceiling sheets m² 394.00 3.94 397.94
1208 Beadings (wooden) m 54.00 0.54 54.54
1209 Moldings m 75.00 0.75 75.75
1210 Screws 38mm Nr 3.00 0.03 3.03
1211 Wooden plugs Nr 5.00 0.05 5.05
1212 Primer (For Celing) l 1,081.00 10.81 1,091.81
1213 Emulsion paint (For Celing) l 900.00 9.00 909.00
1214 100x75 door/ window frame special class m³ 144,777.00 1,447.77 146,224.77
1215 38mm brass screws Nr 22.00 0.22 22.22
1216 25mm brass screws Nr 16.00 0.16 16.16
1217 Rawl plugs and screws Nr 6.00 0.06 6.06
1218 100x50mm brass hinges pair 848.00 8.48 856.48
1219 12x12mm fillets m 6.00 0.06 6.06
1220 300mm skeleton bolts Nr 297.00 2.97 299.97
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1221 38x38mm sash bars m 47.00 0.47 47.47
1222 150mm barrel bolts Nr 391.00 3.91 394.91
1223 Plywood door sash (2.11 m²) Nr 4,737.00 47.37 4,784.37
1224 Holdfasts Nr 20.00 0.20 20.20
1225 PVC door with frame (80.4 x 206 cm) Nr 6,481.00 64.81 6,545.81
1226 3mm glass plain m² 691.00 6.91 697.91
1227 Casement stays 250mm ( heavy duty brass) Nr 385.00 3.85 388.85
1228 Casement fasteners (brass) Nr 222.00 2.22 224.22
1229 Class 11 Ginisapu planks 25mm thick m² 1,178.00 11.78 1,189.78
1230 25mm Brass screw Nr 8.00 0.08 8.08
1231 Lunumidella timber m² 1,189.00 11.89 1,200.89
1232 12 mm thick plywood sheet m² 889.00 8.89 897.89
1233 G.I. clout nails 38mm Kg 499.00 4.99 503.99
1234 31mm planks class 1 m² 2,606.00 26.06 2,632.06
1235 Window ring (Brass) Nr 158.00 1.58 159.58
1236 38mm Copper screws Nr 2.00 0.02 2.02
1237 25mm Copper screws Nr 1.00 0.01 1.01
1238 Casement stays 250mm ( heavy duty) Copper Nr 345.00 3.45 348.45
1239 Casement fasteners (Copper) Nr 207.00 2.07 209.07
1240 38mm oxidized brass screws Nr 17.00 0.17 17.17
1241 25mm oxidized brass screws Nr 12.00 0.12 12.12
1242 10ft P V C ceiling sheet (8") m² 1,808.00 18.08 1,826.08
1243 Moldings m 120.00 1.20 121.20
1244 25mm x 35 mm GI Channel m 66.00 0.66 66.66
1245 Flat head screws 3/4 x 6 Nr 3.00 0.03 3.03
1246 Concrete Nails 25mm Nr 1.00 0.01 1.01
1247 Reverts 5/32 x 1/2 Nr 2.00 0.02 2.02
1248 Self tapping Screw (1/2") Nr 2.00 0.02 2.02
1249 Top Corner bar m 104.00 1.04 105.04
1250 L Corner bar m 108.00 1.08 109.08
1251 H Corner bar m 104.00 1.04 105.04
Brass Founder
1301 Night latch lock (Grade II) Nr 925.00 9.25 934.25
1301a Night latch lock (Grade I) Nr 1,185.00 11.85 1,196.85
1302 Mortise Union or equivalent (English) single lock Nr 3,640.00 36.40 3,676.40
1303 Mortise Union or equivalent (English) double lock Nr 5,875.00 58.75 5,933.75
1304 Robin ITALY or equivalent made brass lock Nr 7,901.00 79.01 7,980.01
1305 Fuda or equivalent lock Nr 1,060.00 10.60 1,070.60
1306 50mm barrel bolt (Brass) Nr 279.00 2.79 281.79
1307 100x100mm butt hinges (Oxidized brass) Nr 469.00 4.69 473.69
1308 150x100mm butt hinges (Oxidized brass) Nr 666.00 6.66 672.66
1309 100mm barrel bolt (Brass) Nr 316.00 3.16 319.16
1310 150mm barrel bolt (Brass) Nr 543.00 5.43 548.43
1311 100x100mm butt hinges (Brass) Nr 568.00 5.68 573.68
1312 150x100mm butt hinges (Brass) Nr 716.00 7.16 723.16
1313 50mm barrel bolt (Copper) Nr 267.00 2.67 269.67
1313A 50mm barrel bolt stainless steel Nr 346.00 3.46 349.46
1314 100x100mm butt hinges (Copper) Nr 469.00 4.69 473.69
1315 150x100mm butt hinges (Copper) Nr 568.00 5.68 573.68
1316 100mm barrel bolt (Copper) Nr 321.00 3.21 324.21
1317 150mm barrel bolt (Copper) Nr 450.00 4.50 454.50
1318 Casement fasteners (Oxidized brass) Nr 286.00 2.86 288.86
1319 Casement stays 250mm ( Heavy Duty Oxidized Brass) Nr 286.00 2.86 288.86
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
Iron Monger
1401 50x50 G.I. welded mesh 10GB m² 790.00 7.90 797.90
1402 50x12mm beadings (not used for rate analysis) m 670.00 6.70 676.70
1403 6mm MS rods kg 160.00 1.60 161.60
1404 12x5mm flat iron m 143.00 1.43 144.43
1405 25x25x5(+/-1mm )mm angle iron m 240.00 2.40 242.40
1406 100mm safety type Hasp and Staple Nr 196.00 1.96 197.96
1407 150mm safety type Hasp and Staple Nr 200.00 2.00 202.00
1408 100x100mm butt hinges (Oxidized iron) Nr 358.00 3.58 361.58
1409 150x100mm butt hinges (Oxidized iron) Nr 465.00 4.65 469.65
1410 37x37x5.8 mm angle iron m 476.00 4.76 480.76
1411 25x25x5 mm angle iron m 342.00 3.42 345.42
1412 25x5mm flat iron m 300.00 3.00 303.00
1412A 38 x 5mm flat iron m 240.00 2.40 242.40
1413 6mm mild steel hook Nr 75.00 0.75 75.75
1414 25 x 25 x1.2mm Box bar m 155.00 1.55 156.55
1415 25 x 25 x 1.4mm Box bar m 200.00 2.00 202.00
1416 37 x 25 x1.6mm Box bar m 203.00 2.03 205.03
1417 50 x 25 x 1.2mm Box bar m 253.00 2.53 255.53
1418 50 x 25 x 1.4mm Box bar m 304.00 3.04 307.04
1419 50 x 25 x 1.6mm Box bar m 346.00 3.46 349.46
1420 50 x 25 x 2mm Box bar m 412.00 4.12 416.12
1421 37 x 37 x 2mm Box bar m 432.00 4.32 436.32
1422 50 x 50 x 2 mm Box bar m 572.00 5.72 577.72
1423 75 x 37 x 2mm Box bar m 695.00 6.95 701.95
225mm long SS barrel bolt with safety type Hasp and
1424 Nr 1,350.00 13.50 1,363.50
Staple
1425 50mm pad lock Nr 800.00 8.00 808.00
Aluminium Extrusions (Natural Anodized)
1501 70S-1101-1 (NA) m 841.00 8.41 849.41
1502 70S-1001-1 (NA) m 861.00 8.61 869.61
1503 70S-1201-1 (NA) m 700.00 7.00 707.00
1504 70S-1601 (NA) m 682.00 6.82 688.82
1505 70S-1701 (NA) m 604.00 6.04 610.04
1506 70S-1501(NA) m 773.00 7.73 780.73
1507 70S-1401 (NA) m 591.00 5.91 596.91
1508 70SFL-103 (NA) m 1,378.00 13.78 1,391.78
1509 70SFL-102 (NA) m 523.00 5.23 528.23
1510 GL-107 (NA) m 256.00 2.56 258.56
1511 DG-02 (NA) m 428.00 4.28 432.28
1512 DG-102 (NA) m 383.00 3.83 386.83
1513 CA-1011(NA) m 934.00 9.34 943.34
1514 CA-1012 (NA) m 1,438.00 14.38 1,452.38
1515 100D-1914 (NA) m 220.00 2.20 222.20
1516 CA-1007 (NA) m 477.00 4.77 481.77
1517 CA-1008 (NA) m 838.00 8.38 846.38
1518 CA-2005 (NA) m 863.00 8.63 871.63
1519 A-111 m 822.00 8.22 830.22
1520 DG-103 (NA) m 293.00 2.93 295.93
1521 DG-101(NA) m 353.00 3.53 356.53
1522 CA-2004 (NA) m 666.00 6.66 672.66
1523 GL-107 (NA) m 256.00 2.56 258.56
1524 CA-1003 (NA) m Deleted Deleted
1525 CA-1004 (NA) m Deleted Deleted
1526 CA-2006 (NA) m Deleted Deleted
1527 DG-04(NA) m 357.00 3.57 360.57
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1528 DG-102(NA) m 383.00 3.83 386.83
1529 CA-1001 (NA) m Deleted Deleted
1530 CA-1002 (NA) m Deleted Deleted
1531 100D-3105 (NA) m 1,528.00 15.28 1,543.28
1532 100D-101 (NA) m 1,537.00 15.37 1,552.37
1533 100D-103 (NA) m 1,609.00 16.09 1,625.09
1534 100D-201 (NA) m 1,482.00 14.82 1,496.82
1535 100D-301 (NA) m 1,767.00 17.67 1,784.67
1536 100D-401 (NA) m 1,957.00 19.57 1,976.57
1537 100D-501 (NA) m 210.00 2.10 212.10
1538 70D-1910 (NA) m 221.00 2.21 223.21
1539 100D-3503A (NA) m 1,114.00 11.14 1,125.14
1540 100D-3004 (NA) m 1,283.00 12.83 1,295.83
1541 100D-3207 (NA) m Deleted Deleted
1542 100D-3503 (NA) m 1,206.00 12.06 1,218.06
1543 100D-1914 (NA) m 220.00 2.20 222.20
1544 100D-3203 (NA) m Deleted Deleted
1545 70S-1002-1(NA) m 603.00 6.03 609.03
1546 70S-1102-1 (NA) m 432.00 4.32 436.32
1547 70S-1202-1(NA) m 443.00 4.43 447.43
1548 70S-1701A (NA) m 793.00 7.93 800.93
1549 70S-1402-1 (NA) m 559.00 5.59 564.59
1550 70S-1801 (NA) m 534.00 5.34 539.34
1551 70S-1101-2 (NA) m Deleted Deleted
1552 70S-1001-1 (NA) m 861.00 8.61 869.61
1553 70S-1704 (NA) m Deleted Deleted
1554 70S-1402-1 (NA) m 559.00 5.59 564.59
1555 70S-1201-1 (NA) m 700.00 7.00 707.00
1556 70S-1604 (NA) m Deleted Deleted
1557 70S-1801 (NA) m 534.00 5.34 539.34
1558 PT-5157 (NA) m 593.00 5.93 598.93
1559 PT-5158 (NA) m 424.00 4.24 428.24
1560 PT-5153 (NA) m 156.00 1.56 157.56
1561 PT-5154 (NA) m 316.00 3.16 319.16
1562 70SM-1011 (NA) m 775.00 7.75 782.75
1563 PT-5159 (NA) m 781.00 7.81 788.81
1564 SPR 105 (NA) m 820.00 8.20 828.20
1565 SPR 106 (NA) m 702.00 7.02 709.02
1566 SPR 110 (NA) m 355.00 3.55 358.55
1567 SPR 4521 (NA) m 576.00 5.76 581.76
1568 3303AA Rubber Beading m 43.00 0.43 43.43
1569 DG 01 (NA) m 409.00 4.09 413.09
1570 DG 101 (NA) m 353.00 3.53 356.53
1571 80S-2701 (NA) m 1,005.00 10.05 1,015.05
1572 80S-2801 (NA) m 1,263.00 12.63 1,275.63
1573 CA-1114 (NA) m 1,094.00 10.94 1,104.94
Aluminium Extrusions (Bronze Anodized)
1601 70S-1101-1 (BA) m 856.00 8.56 864.56
1602 70S-1001-1 (BA) m 903.00 9.03 912.03
1603 70S-1201-1 (BA) m 714.00 7.14 721.14
1604 70S-1601(BA) m 693.00 6.93 699.93
1605 70S-1701(BA) m 632.00 6.32 638.32
1606 70S-1501 (BA) m 799.00 7.99 806.99
1607 70S-1401 (BA) m 601.00 6.01 607.01
1608 70SFL-103 (BA) m 1,406.00 14.06 1,420.06
1609 70SFL-102 (BA) m 555.00 5.55 560.55
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1610 GL-107 (BA) m 266.00 2.66 268.66
1611 DG-02 (BA) m 453.00 4.53 457.53
1612 DG-102 (BA) m 389.00 3.89 392.89
1613 CA-1011(BA) m 970.00 9.70 979.70
1614 CA-1012 (BA) m 1,493.00 14.93 1,507.93
1615 100D-1914 (BA) m 225.00 2.25 227.25
1616 CA-1007 (BA) m 486.00 4.86 490.86
1617 CA-1008 (BA) m 853.00 8.53 861.53
1618 CA-2005 (BA) m 880.00 8.80 888.80
1619 A-111 m 836.00 8.36 844.36
1620 DG-103 (BA) m 299.00 2.99 301.99
1621 DG-101(BA) m 359.00 3.59 362.59
1622 CA-2004 (BA) m 691.00 6.91 697.91
1623 GL-107 (BA) m 266.00 2.66 268.66
1624 CA-1003 (BA) m Deleted Deleted
1625 CA-1004 (BA) m Deleted Deleted
1626 CA-2006 (BA) m Deleted Deleted
1627 DG-04(BA) m 364.00 3.64 367.64
1628 DG-102(BA) m 389.00 3.89 392.89
1629 CA-1001 (BA) m Deleted Deleted
1630 CA-1002 (BA) m Deleted Deleted
1631 100D-3105 (BA) m 1,558.00 15.58 1,573.58
1632 100D-101 (BA) m 1,565.00 15.65 1,580.65
1633 100D-103 (BA) m 1,645.00 16.45 1,661.45
1634 100D-201 (BA) m 1,512.00 15.12 1,527.12
1635 100D-301 (BA) m 1,813.00 18.13 1,831.13
1636 100D-401 (BA) m 1,994.00 19.94 2,013.94
1637 100D-501 (BA) m 214.00 2.14 216.14
1638 70D-1910 (BA) m 225.00 2.25 227.25
1639 100D-3503A (BA) m 1,134.00 11.34 1,145.34
1640 100D-3004 (BA) m 1,309.00 13.09 1,322.09
1641 100D-3207 (BA) m Deleted Deleted
1642 100D-3503 (BA) m 1,252.00 12.52 1,264.52
1643 100D-1914 (BA) m 225.00 2.25 227.25
1644 100D-3203 (BA) m Deleted Deleted
1645 70S-1002-1(BA) m 642.00 6.42 648.42
1646 70S-1102-1 (BA) m 442.00 4.42 446.42
1647 70S-1202-1(BA) m 451.00 4.51 455.51
1648 70S-1701A (BA) m 808.00 8.08 816.08
1649 70S-1402-1 (BA) m 576.00 5.76 581.76
1650 70S-1801 (BA) m 545.00 5.45 550.45
1651 70S-1101-2 (BA) m Deleted Deleted
1652 70S-1001-1 (BA) m 903.00 9.03 912.03
1653 70S-1704 (BA) m Deleted Deleted
1654 70S-1402-1 (BA) m 576.00 5.76 581.76
1655 70S-1201-1 (BA) m 714.00 7.14 721.14
1656 70S-1601 (BA) m 693.00 6.93 699.93
1657 70S-1801 (BA) m 545.00 5.45 550.45
1658 PT-5157 (BA) m 604.00 6.04 610.04
1659 PT-5158 (BA) m 439.00 4.39 443.39
1660 PT-5153 (BA) m 162.00 1.62 163.62
1661 PT-5154 (BA) m 323.00 3.23 326.23
1662 70SM-1011 (BA) m 789.00 7.89 796.89
1663 PT-5159 (BA) m 792.00 7.92 799.92
1664 SPR 105 (BA) m 836.00 8.36 844.36
1665 SPR 106 (BA) m 715.00 7.15 722.15
1666 SPR 110 (BA) m 362.00 3.62 365.62
BSR (Vol-1) page 15
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1667 SPR 4521 (BA) m 587.00 5.87 592.87
1668 3303AA Rubber Beading m 43.00 0.43 43.43
1669 DG 01 (BA) m 427.00 4.27 431.27
1670 DG 101 (BA) m 359.00 3.59 362.59
1671 80S-2701 (BA) m 1,024.00 10.24 1,034.24
1672 80S-2801 (BA) m 1,288.00 12.88 1,300.88
1673 CA-1114 (BA) m 1,116.00 11.16 1,127.16
Aluminium Extrusions (Powder Coated)
1701 70S-1101-1 (PC) m 969.00 9.69 978.69
1702 70S-1001-1 (PC) m 992.00 9.92 1,001.92
1703 70S-1201-1 (PC) m 807.00 8.07 815.07
1704 70S-1601 (PC) m 785.00 7.85 792.85
1705 70S-1701 (PC) m 696.00 6.96 702.96
1706 70S-1501 (PC) m 891.00 8.91 899.91
1707 70S-1401(PC) m 682.00 6.82 688.82
1708 70SFL-103 (PC) m 1,588.00 15.88 1,603.88
1709 70SFL-102 (PC) m 611.00 6.11 617.11
1710 GL-107 (PC) m 288.00 2.88 290.88
1711 DG-02 (PC) m 494.00 4.94 498.94
1712 DG-102 (PC) m 441.00 4.41 445.41
1713 CA-1011(PC) m 1,068.00 10.68 1,078.68
1714 CA-1012 (PC) m 1,634.00 16.34 1,650.34
1715 100D-1914 (PC) m 254.00 2.54 256.54
1716 CA-1007 (PC) m 551.00 5.51 556.51
1717 CA-1008 (PC) m 956.00 9.56 965.56
1718 CA-2005 (PC) m 994.00 9.94 1,003.94
1719 A-111 m 945.00 9.45 954.45
1720 DG-103 (PC) m 338.00 3.38 341.38
1721 DG-101(PC) m 407.00 4.07 411.07
1722 CA-2004 (PC) m 747.00 7.47 754.47
1723 GL-107 (PC) m 288.00 2.88 290.88
1724 CA-1003 (PC) m Deleted Deleted
1725 CA-1004 (PC) m Deleted Deleted
1726 CA-2006 (PC) m Deleted Deleted
1727 DG-04 (PC) m 411.00 4.11 415.11
1728 DG-102(PC) m 441.00 4.41 445.41
1729 CA-1001 (PC) m Deleted Deleted
1730 CA-1002 (PC) m Deleted Deleted
1731 100D-3105 (PC) m 1,760.00 17.60 1,777.60
1732 100D-101 (PC) m 1,772.00 17.72 1,789.72
1733 100D-103 (PC) m 1,854.00 18.54 1,872.54
1734 100D-201 (PC) m 1,708.00 17.08 1,725.08
1735 100D-301 (PC) m 2,037.00 20.37 2,057.37
1736 100D-401 (PC) m 2,255.00 22.55 2,277.55
1737 100D-501 (PC) m 242.00 2.42 244.42
1738 70D-1910 (PC) m 255.00 2.55 257.55
1739 100D-3503A (PC) m 1,285.00 12.85 1,297.85
1740 100D-3004 (PC) m 1,479.00 14.79 1,493.79
1741 100D-3207 (PC) m Deleted Deleted
1742 100D-3503 (PC) m 1,354.00 13.54 1,367.54
1743 100D-1914 (PC) m 254.00 2.54 256.54
1744 100D-3203 (PC) m Deleted Deleted
1745 70S-1002-1(PC) m 707.00 7.07 714.07
1746 70S-1102-1 (PC) m 497.00 4.97 501.97
1747 70S-1202-1(PC) m 509.00 5.09 514.09
1748 70S-1701A (PC) m 913.00 9.13 922.13
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1749 70S-1402-1 (PC) m 645.00 6.45 651.45
1750 70S-1801 (PC) m 615.00 6.15 621.15
1751 70S-1101-2 (PC) m Deleted Deleted
1752 70S-1001-1 (PC) m 992.00 9.92 1,001.92
1753 70S-1704 (PC) m Deleted Deleted
1754 70S-1402-1 (PC) m 645.00 6.45 651.45
1755 70S-1201-1 (PC) m 807.00 8.07 815.07
1756 70S-1604 (PC) m Deleted Deleted
1757 70S-1801 (PC) m 615.00 6.15 621.15
1758 PT-5157 (PC) m 662.00 6.62 668.62
1759 PT-5158 (PC) m 493.00 4.93 497.93
1760 PT-5153 (PC) m 198.00 1.98 199.98
1761 PT-5154 (PC) m 364.00 3.64 367.64
1762 70SM-1011 (PC) m 893.00 8.93 901.93
1763 PT-5159 (PC) m 879.00 8.79 887.79
1764 SPR 105 (PC) m 946.00 9.46 955.46
1765 SPR 106 (PC) m 810.00 8.10 818.10
1766 SPR 110 (PC) m 409.00 4.09 413.09
1767 SPR 4521 (PC) m 663.00 6.63 669.63
1768 3303AA Rubber Beading m 43.00 0.43 43.43
1769 DG 01 (PC) m 456.00 4.56 460.56
1770 DG 101 (PC) m 407.00 4.07 411.07
1771 80S-2701 (PC) m 1,157.00 11.57 1,168.57
1772 80S-2801 (PC.) m 1,455.00 14.55 1,469.55
1773 CA-1114 (PC) m 1,260.00 12.60 1,272.60
Accessories
1801 Sliding lock (Heavy duty) Nr 680.00 6.80 686.80
1802 Roller-70mm Nr 85.00 0.85 85.85
1803 S.T. Screw - 1" No.8 Nr 2.00 0.02 2.02
1804 Gasket m 63.00 0.63 63.63
1805 Wool felt m 30.00 0.30 30.30
1806 Pop rivet 5/32"x1/2" Nr 2.00 0.02 2.02
1807 Plastic guide Nr 2.00 0.02 2.02
1808 Cap 3/8" dia. Nr 2.00 0.02 2.02
1809 S.T. Screw - 2" No.8 Nr 4.00 0.04 4.04
1810 Casement lock Nr 196.00 1.96 197.96
1811 Bar hinges (12") Pair 395.00 3.95 398.95
1812 Weather strip m 20.00 0.20 20.20
1813 Pop rivet 3/16"x1/2" Nr 4.00 0.04 4.04
1814 Self tapping Screw - No.8 x 1/2' Nr 3.00 0.03 3.03
1815 Door lock Nr 680.00 6.80 686.80
1816 Butt hinge (2.5"x4") Nr 150.00 1.50 151.50
1817 Door handle with cap nut Pair 860.00 8.60 868.60
1818 Revert (C Sk) 5/32"x1/2" Nr 2.00 0.02 2.02
1819 Threaded bar with nut m 181.00 1.81 182.81
1820 Door closer Nr 2,760.00 27.60 2,787.60
1821 Pop rivet 1/8"x1/2" Nr 2.00 0.02 2.02
1822 G. I. Channel m 165.00 1.65 166.65
1823 White board 8' x 4', (2.5~3.0 mm) m² 306.00 3.06 309.06
1824 Chip board (12 mm) m² 691.00 6.91 697.91
1825 Melamine board (6mm thick) m² 938.00 9.38 947.38
1826 Composite Paneled Board (3mmthick) m² 3,600.00 36.00 3,636.00
1827 Floor Hinges Nr 9,231.00 92.31 9,323.31
1828 Cladding sheet (4mm thick) Single side m² 2,014.00 20.14 2,034.14
1829 Cladding sheet(4mm thick) Double side m² 2,014.00 20.14 2,034.14
1830 Cladding sheet(3mm thick) Double side m² 1,250.00 12.50 1,262.50
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
1831 Cladding sheet(4mm thick) -for Out Door m² 5,868.00 58.68 5,926.68
1832 Power boit lock Nr 193.00 1.93 194.93
1833 8 x 2" Self Tapping Screw Nr 4.00 0.04 4.04
1834 25x25 Aluminium "L' Angle m 138.00 1.38 139.38
1835 Flush bolt Nr 476.00 4.76 480.76
Glazier
1901 5mm thick figured glass panes m² 1,773.00 17.73 1,790.73
1902 3mm thick figured glass panes m² 918.00 9.18 927.18
1903 5mm thick clear glass panes m² 1,291.00 12.91 1,303.91
1904 3mm thick clear glass panes m² 861.00 8.61 869.61
1905 5mm thick tinted glass panes m² 1,988.00 19.88 2,007.88
1906 3mm thick tinted glass panes m² 1,076.00 10.76 1,086.76
1907 12mmx12mm teak beading m 13.00 0.13 13.13
Plasterer
2001 Lime kg 30.00 0.30 30.30
Plumber
2101 12mm (1/2") ball valve - Brass Nr 930.00 9.30 939.30
2102 12mm (1/2") ball valve - PVC Nr 158.00 1.58 159.58
2103 20mm (3/4") ball valve - Brass Nr 1,300.00 13.00 1,313.00
2104 20mm (3/4") ball valve - PVC Nr 148.00 1.48 149.48
2105 25mm (1") ball valve - Brass Nr 1,450.00 14.50 1,464.50
2106 25mm (1") ball valve - PVC Nr 237.00 2.37 239.37
2107 38mm (1 1/4") ball valve - Brass Nr 3,100.00 31.00 3,131.00
2108 38mm (1 1/2") ball valve - PVC Nr 490.00 4.90 494.90
2109 12mm (1/2") bib tap - Brass Nr 593.00 5.93 598.93
2110 12mm (1/2") bib tap - Chromium Plated Nr 1,240.00 12.40 1,252.40
2111 12mm (1/2") bib tap - PVC Nr 292.00 2.92 294.92
2112 12mm (1/2") gate valve - Brass Nr 828.00 8.28 836.28
2113 12mm (1/2") gate valve - PVC Nr 212.00 2.12 214.12
2114 20mm (3/4") gate valve - Brass Nr 1,300.00 13.00 1,313.00
2115 20mm (3/4") gate valve - PVC Nr 351.00 3.51 354.51
2116 25mm (1") gate valve - Brass Nr 1,540.00 15.40 1,555.40
2117 25mm (1") gate valve - PVC Nr 494.00 4.94 498.94
2118 38mm (1 1/4") gate valve - Brass Nr 2,390.00 23.90 2,413.90
2119 38mm (1 1/2") gate valve - PVC Nr 620.00 6.20 626.20
2120 20mm (1/2") PVC pipes PNT14 m 51.00 0.51 51.51
2121 20mm (1/2") PVC pipes PNT9 m 196.00 1.96 197.96
2122 20mm (1/2") PVC pipes m 146.00 1.46 147.46
2123 25mm (3/4") PVC pipes PNT11 m 98.00 0.98 98.98
2124 25mm (3/4") PVC pipes PNT9 m Deleted Deleted
2125 25mm (3/4") PVC pipes m Deleted Deleted
2126 32mm (1") PVC pipes PNT11 m 186.00 1.86 187.86
2127 32mm (1") PVC pipes PNT9 m 166.00 1.66 167.66
2128 32mm (1") PVC pipes PNT7 m 75.00 0.75 75.75
2129 40mm (1 1/4") PVC pipes PNT11 m 251.00 2.51 253.51
2130 40mm (1 1/4") PVC pipes PNT9 m 227.00 2.27 229.27
2131 40mm (1 1/4") PVC pipes PNT7 m 177.00 1.77 178.77
2132 50mm (1 1/2") PVC pipes PNT11 m 381.00 3.81 384.81
2133 50mm (1 1/2") PVC pipes PNT9 m 343.00 3.43 346.43
2134 50mm (1 1/2") PVC pipes PNT7 m 273.00 2.73 275.73
2135 63mm (2") PVC pipes PNT11 m 685.00 6.85 691.85
2136 63mm (2") PVC pipes PNT9 m 617.00 6.17 623.17
2137 63mm (2") PVC pipes PNT7 m 479.00 4.79 483.79
2138 75mm (2 1/2") PVC pipes PNT9 m 1,066.00 10.66 1,076.66
2139 75mm (2 1/2") PVC pipes PNT7 m 847.00 8.47 855.47
2140 90mm (3") PVC pipes PNT9 m 1,212.00 12.12 1,224.12
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
2141 90mm (3") PVC pipes PNT7 m 888.00 8.88 896.88
2142 110mm (4") PVC pipes PNT9 m 1,791.00 17.91 1,808.91
2143 110mm (4") PVC pipes PNT7 m 1,387.00 13.87 1,400.87
2144 12mm (1/2") Angle valve - Chromium Plated Nr 1,240.00 12.40 1,252.40
2144 B 12mm (1/2") Angle valve - PVC Nr 346.00 3.46 349.46
2145 12mm (1/2") PVC flexible horse (450mm) Nr 260.00 2.60 262.60
Sanitary Fittings
2201 Kitchen sink with single bowl and single drain board Nr 4,501.00 45.01 4,546.01
2202 Kitchen sink with single bowl and double drain board Nr 12,835.00 128.35 12,963.35
Kitchen sink with single bowl special and double
2202A Nr 16,784.00 167.84 16,951.84
drain board
2203 Kitchen sink with double bowl and double drain board Nr 16,290.00 162.90 16,452.90
2204 Heavy quality chromium plated swan tap Nr 2,251.00 22.51 2,273.51
2205 Tee Iron brackets Nr 345.00 3.45 348.45
2206 Ceramic wash basin Nr 5,000.00 50.00 5,050.00
2207 Ceramic wash basin - Pedestal /Ordinary Nr 8,510.00 85.10 8,595.10
Ceramic wash basin - Pedestal /Semi luxury (Ideal,
2208 Nr 21,399.00 213.99 21,612.99
American, British)
Ceramic wash basin special / luxury Pedestal (Ideal,
2208A Nr 32,500.00 325.00 32,825.00
American, British)
2209 Heavy quality chromium plated pillar tap Nr 1,975.00 19.75 1,994.75
Ceramic squatting pan with trap and ceramic foot
2210 Nr 2,500.00 25.00 2,525.00
rests
Square type ceramic squatting pan with foot rests and
2211 Nr 3,050.00 30.50 3,080.50
trap
2212 9 liters capacity high level ceramic cistern Nr 3,752.00 37.52 3,789.52
2212A 9 liters capacity high level ceramic cistern special Nr 8,001.00 80.01 8,081.01
2213 9 liters capacity high level PVC cistern Nr 3,750.00 37.50 3,787.50
2214 9 liters capacity low level ceramic cistern Nr 4,501.00 45.01 4,546.01
2214A 9 liters capacity low level ceramic cistern special Nr 8,001.00 80.01 8,081.01
2215 9 liters capacity low level PVC cistern Nr 3,750.00 37.50 3,787.50
2215A 9 liters capacity low level PVC cistern special Nr 3,456.00 34.56 3,490.56
2216 Low level ceramic water closet Nr 3,456.00 34.56 3,490.56
2216A Low level ceramic water closet special Nr 13,329.00 133.29 13,462.29
Closed couple ceramic water closet without wash
2217 A Nr 14,248.00 142.48 14,390.48
basin /Ordinary
Closed couple ceramic water closet (British) special
2217 B Nr 24,150.00 241.50 24,391.50
/Semi luxury
Closed couple ceramic water closet (British) special
2217C Nr 38,000.00 380.00 38,380.00
/luxury
2218 Bowl type urinal Nr 7,500.00 75.00 7,575.00
2218A Bowl type urinal with flush valve(British) special Nr 26,200.00 262.00 26,462.00
2219 40mm Bottle Trap Nr 650.00 6.50 656.50
2220 Chromium plated Bidet shower Nr 1,728.00 17.28 1,745.28
2220 B PVC Bidet shower Nr 850.00 8.50 858.50
2221 PVC Seat cover Nr 920.00 9.20 929.20
2222 Bathroom mirror Nr 1,481.00 14.81 1,495.81
2223 Chromium Plated Soap Tray Nr 741.00 7.41 748.41
2224 Ceramic Soap Tray Nr 642.00 6.42 648.42
2224A Ceramic Soap Tray special Nr 1,728.00 17.28 1,745.28
2225 Chromium Plated Tooth brush holder Nr 750.00 7.50 757.50
2226 Ceramic Tooth brush holder Nr 1,025.00 10.25 1,035.25
2227 Chromium Plated 100 mm dia. Shower Rose Nr 1,700.00 17.00 1,717.00
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
Chromium Plated 100 mm dia. Shower Rose with bar
2227 B Nr 8,875.00 88.75 8,963.75
(English)
2228 PVC 100 mm dia. Shower Rose Nr 148.00 1.48 149.48
2229 Chromium Plated toilet paper holder (Normal) Nr 848.00 8.48 856.48
2229 B Chromium Plated toilet paper holder (English) Nr 2,800.00 28.00 2,828.00
2230 Ceramic Toilet paper holder (Normal) Nr 1,235.00 12.35 1,247.35
2230 B Ceramic Toilet paper holder (English) Nr 3,702.00 37.02 3,739.02
2231 Chromium Plated Towel rail Nr 2,593.00 25.93 2,618.93
2232 Ceramic Towel rail Nr 2,244.00 22.44 2,266.44
2233 Chromium Plated conceal valve for shower (Normal) Nr 1,649.00 16.49 1,665.49
2233 B Chromium Plated conceal valve for shower (English) Nr 3,000.00 30.00 3,030.00
Roof Plumber
2301 PVC eave gutters 12'-0" m 266.00 2.66 268.66
2302 End cap Nr 123.00 1.23 124.23
2303 Joint m 124.00 1.24 125.24
2304 Gutter joiner Nr 124.00 1.24 125.24
2305 Gutter brackets Nr 58.00 0.58 58.58
2306 Running head Nr 284.00 2.84 286.84
2307 87.5 mm dia. PVC down pipes m 119.00 1.19 120.19
2308 87.5 mm dia. PVC socket Nr 113.00 1.13 114.13
2309 87.5 mm dia. PVC elbows Nr 173.00 1.73 174.73
2310 Clips (PVC) Nr 20.00 0.20 20.20
2311 200mmx200x87.5mm PVC gutter box Nr 813.00 8.13 821.13
2312 Zink Aluminium rainwater eave gutters m 675.00 6.75 681.75
2313 Stop end and plate Nr 188.00 1.88 189.88
2314 Steel brackets Nr 70.00 0.70 70.70
2315 100x100mm Zn-alum down pipes m 635.00 6.35 641.35
2316 150x150mm Zn-alum down pipes m 944.00 9.44 953.44
2317 Nozzles 100 X 100 Nr 306.00 3.06 309.06
2317A Nozzles 150 X 150 Nr 730.00 7.30 737.30
2318 Offsets Nr 415.00 4.15 419.15
2319 Shoes Nr 297.00 2.97 299.97
2320 Clips (Zn/Al) Nr 35.00 0.35 35.35
300x300mm gutter boxes in Zink Alum color coated
2321 Nr 750.00 7.50 757.50
metal sheets
2322 25x25mm N/A Alluminium m 202.00 2.02 204.02
Tinker
2401 0.47 mm Zn/Al sheet m² 1,442.00 14.42 1,456.42
2402 18 gage GI Sheet Nr 2,355.00 23.55 2,378.55
Drain Layer
2501 Copper wire dome Nr 874.00 8.74 882.74
2502 Drainage gully and grate PVC Nr 685.00 6.85 691.85
2502 B Drainage gully and grate Chromium plated Nr 995.00 9.95 1,004.95
2503 40mm 4-way PVC floor trap Nr 710.00 7.10 717.10
Painter
2601 Lime kg 30.00 0.30 30.30
2602 Glue kg 450.00 4.50 454.50
2603 Yellow ochre kg 84.00 0.84 84.84
2604 Water proofing Cement Paint kg 89.00 0.89 89.89
2605 Wall primer l 396.00 3.96 399.96
2606 Emulsion paint l 950.00 9.50 959.50
2607 Weather shield paint l 1,101.00 11.01 1,112.01
2608 Enamel paint l 995.00 9.95 1,004.95
2609 Anticorrosive paint l 975.00 9.75 984.75
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
2610 Floor paint l 900.00 9.00 909.00
2611 Floor polish kg 875.00 8.75 883.75
2612 Wood primer l 800.00 8.00 808.00
2613 Polyurethane varnish l 900.00 9.00 909.00
2614 Thinner l 440.00 4.40 444.40
2615 Turpentine l 400.00 4.00 404.00
2616 Potty (from 28 kg bucket) kg 114.00 1.14 115.14
2617 Oil Primer l 1,300.00 13.00 1,313.00
2618 Auto paint l 1,500.00 15.00 1,515.00
2619 Roofing paint l 1,150.00 11.50 1,161.50
2620 Black Board paint (Green/Black) l 1,040.00 10.40 1,050.40
2622 Roof shield water base (all colours) paint l 1,375.00 13.75 1,388.75
2621 Primer base for alluminium & G,I Surface l 1,755.00 17.55 1,772.55
Electrical Installation
2701 1/1.13 mm Cu\PVC\PVC ( 1 sq.mm) m 26.00 0.26 26.26
2702 7/0.67 mm Cu\PVC ( 2.5 sq.mm)-Earth Cable m 66.00 0.66 66.66
2702B 7/0.85 mm Cu\PVC ( 4 sq.mm)-Earth Cable m 112.00 1.12 113.12
2703 7/0.53mm Cu\PVC\PVC(T)-1.5sq.mm m Deleted Deleted
2704 7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm m 142.00 1.42 143.42
2705 7/1.04mm Cu\PVC\PVC(T)-6sq.mm m 325.00 3.25 328.25
2705B 7/1.70mm Cu\PVC\PVC(T)-16sq.mm m 765.00 7.65 772.65
2706 Holder Nr 110.00 1.10 111.10
2707 Sun box Nr 47.00 0.47 47.47
2708 Switch Nr 155.00 1.55 156.55
2710 5A socket outlet Nr Deleted Deleted
2711 13A socket outlet -Square pin/Type G Nr 450.00 4.50 454.50
2712 15A socket outlet Nr Deleted Deleted
2713 Ceiling rose Nr 110.00 1.10 111.10
2714 Round block Nr Deleted Deleted
2715 Fan hook Nr 246.00 2.46 248.46
2716 Compact Fluorescent Lamp (CFL) (20W) Nr 483.00 4.83 487.83
2716B Compact Fluorescent Lamp (CFL) (14W) Nr 368.00 3.68 371.68
2717 Weather proofed lamp fitting (outdoor) Nr 1,750.00 17.50 1,767.50
2718 Wall bracket lamp fitting (Indoor) Nr 4,750.00 47.50 4,797.50
2719 6W LED Panel Light (Sunk/Surface) Nr 700.00 7.00 707.00
2720 9W LED Panel Light (Sunk/Surface) Nr 1,001.00 10.01 1,011.01
2721 12W LED Panel Light (Sunk/Surface) Nr 1,101.00 11.01 1,112.01
2722 15W LED Panel Light (Sunk/Surface) Nr 1,300.00 13.00 1,313.00
2723 18W LED Panel Light (Sunk/Surface) Nr 1,400.00 14.00 1,414.00
2724 24W LED Panel Light (Sunk/Surface) Nr 2,450.00 24.50 2,474.50
2725 1400mm Sweep Ceiling Fan Nr 8,625.00 86.25 8,711.25
2726 300x300mm Exhaust fan Nr 9,200.00 92.00 9,292.00
2727 Wall Mounted Fan (Around 60W) Nr 11,960.00 119.60 12,079.60
2728 40 Amp single phase main switch Nr 1,051.00 10.51 1,061.51
2729 63Amp single phase main switch Nr 1,051.00 10.51 1,061.51
2730 6A/10A/16A Amp Circuit breaker Nr 470.00 4.70 474.70
2731 A Distribution board with cover (Type 500)-4way/6way Nr 725.00 7.25 732.25
Distribution board with cover (Type 700)-
2731 B Nr 1,125.00 11.25 1,136.25
8way/10way
2731 C Distribution board with cover (Type 900)-12 way Nr 1,600.00 16.00 1,616.00
2731 D 4 Raw Steel Enclosure (350x700x125)mm Nr 13,131.00 131.31 13,262.31
2732 40 Amp three phase main switch Nr 2,110.00 21.10 2,131.10
2733 63 Amp three phase main switch Nr 2,110.00 21.10 2,131.10
2734 40 Amp single phase RCCB (Trip switch) Nr 3,395.00 33.95 3,428.95
2735 63Amp single phase RCCB (Trip switch) Nr 3,720.00 37.20 3,757.20
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
2736 40 Amp/30 mA three phase RCCB (Trip switch) Nr 4,995.00 49.95 5,044.95
2737 63 Amp/30 mA three phase RCCB (Trip switch) Nr 5,395.00 53.95 5,448.95
2738 Electrical Bell Nr 370.00 3.70 373.70
2739 GI earth Pipe 2mm thick (50mm dia - 1800mm length) Nr 1,699.00 16.99 1,715.99
2740 50x50x5.8 mm Angle Iron m 950.00 9.50 959.50
2741 20A/25A/32A Amp Circuit breaker Nr 470.00 4.70 474.70
2742 3/4" PVC conduit pipe (20mm) m 54.00 0.54 54.54
2709 1" PVC Conduit pipe (25mm) m 68.00 0.68 68.68
2743 1 1/2" PVC Conduit pipe (40mm) m 160.00 1.60 161.60
2744 1" PVC Casing with capping m 75.00 0.75 75.75
2745 1 1/2" PVC casing with capping m 135.00 1.35 136.35
2746 2"x 1" PVC casing with capping m 185.00 1.85 186.85
2746A 2"x 2" PVC casing with capping m 328.00 3.28 331.28
2747 4"x 2" PVC casing with capping m 577.00 5.77 582.77
2748 7W CFL Bulb (B22/E27) Nr 368.00 3.68 371.68
2749 10W CFL Bulb (B22/E27) Nr 368.00 3.68 371.68
2750 14W CFL Bulb (B22/E27) Nr 368.00 3.68 371.68
2751 18W CFL Bulb (B22/E27) Nr 473.00 4.73 477.73
2752 3W LED Bulb (B22/E27) Nr 250.00 2.50 252.50
2753 5W LED Bulb (B22/E27) Nr 350.00 3.50 353.50
2754 7W LED Bulb (B22/E27) Nr 450.00 4.50 454.50
2755 9W LED Bulb (B22/E27) Nr 550.00 5.50 555.50
2756 12W LED Bulb (B22/E27) Nr 700.00 7.00 707.00
Special Decorative 1 Gang One Way Switch (Big
2757 Nr 250.00 2.50 252.50
toggle)
Special Decorative 2 Gang One Way Switch (Big
2758 Nr 350.00 3.50 353.50
toggle)
Special Decorative 3 Gang One Way Switch (Big
2759 Nr 450.00 4.50 454.50
toggle)
Special Decorative 1 Gang Two Way Switch (Big
2760 Nr 395.00 3.95 398.95
toggle)
Special Decorative Universal Socket Outlet (Big
2761 Nr 895.00 8.95 903.95
toggle)
2762 Special Decorative 13A Socket Outlet (Big toggle) Nr 771.00 7.71 778.71
2763 Special Decorative 15A Socket Outlet (Big toggle) Nr 795.00 7.95 802.95
Miscellaneous Work
2801 PVC coated gauge 10 chain link mesh m² 868.00 8.68 876.68
2802 2" GI pipes (2mm) 2.3mm m 892.00 8.92 900.92
2803 1 1/2" GI pipes (2.3mm) m 678.00 6.78 684.78
2804 1" GI pipes (2mm) m 403.00 4.03 407.03
2805 Barbed wire (25kg) m 23.00 0.23 23.23
2806 Hooks and washers Nr 20.00 0.20 20.20
2807 Concrete fence posts 6'-0" Nr 1,075.00 10.75 1,085.75
2808 Concrete fence posts 6'-6" Nr 1,101.00 11.01 1,112.01
2809 Concrete fence posts 7'-0" (7.6) Nr 1,265.00 12.65 1,277.65
2810 Concrete fence posts 8'-0" Nr 1,700.00 17.00 1,717.00
2811 Concrete fence posts 10'-6" Nr 3,001.00 30.01 3,031.01
2812 Concrete fence supporting posts for corner posts Nr 2,600.00 26.00 2,626.00
2813 2" GI pipes (2.3mm) m 944.00 9.44 953.44
2814 2" GI pipes (1.5mm) m 428.00 4.28 432.28
2815 1 1/2" GI pipes (2.3mm) m 718.00 7.18 725.18
2816 1 1/2" GI pipes (1.5mm) m 351.00 3.51 354.51
2817 1 1/4" GI pipes (2.3mm) m 628.00 6.28 634.28
2818 1 1/4" GI pipes (1.8mm) m 311.00 3.11 314.11
2819 1 1/4" GI pipes (1.5mm) m 288.00 2.88 290.88
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
2820 1 " GI pipes (2.0mm) m 427.00 4.27 431.27
2821 1 " GI pipes (1.5mm) m 229.00 2.29 231.29
2822 12mm thick MDF board m² 792.00 7.92 799.92
2823 12 mm thick regiform board m² 366.00 3.66 369.66
2824 Velvet cloth m² 380.00 3.80 383.80
2825 Chicken mesh m² 253.00 2.53 255.53
Gabion box (Box size in meters)(Heavy galvanized
3000
& PVC coated)
3001 Gabion box 1x0.5x0.5m nr 3,000.00 30.00 3,030.00
3002 Gabion box 1x1x0.5m nr 3,690.00 36.90 3,726.90
3003 Gabion box 1x1x1m nr 4,996.00 49.96 5,045.96
3004 Gabion box 1.5x1x0.5m nr 4,088.00 40.88 4,128.88
3005 Gabion box 1.5x1x1m nr 6,095.00 60.95 6,155.95
3006 Gabion box 2x0.5x0.5m nr 5,087.00 50.87 5,137.87
3007 Gabion box 2x1x0.5m nr 6,773.00 67.73 6,840.73
3008 Gabion box 2x1x1m nr 7,820.00 78.20 7,898.20
3009 Gabion box 2x2x1m nr 14,375.00 143.75 14,518.75
3010 Gabion box 2.5x1x1m nr 10,900.00 109.00 11,009.00
3011 Gabion box 2x1.5x0.5m nr 7,818.00 78.18 7,896.18
3012 Gabion box 2x1.5x1m nr 11,241.00 112.41 11,353.41
3013 Gabion box 2.5x1x0.5m nr 8,681.00 86.81 8,767.81
3014 Gabion box 3x1x0.5m nr 11,183.00 111.83 11,294.83
3015 Gabion box 3x1x1m nr 11,730.00 117.30 11,847.30
3016 Gabion box 3x1.5x1m nr 18,024.00 180.24 18,204.24
3017 Gabion box 4x1x0.5m nr 12,869.00 128.69 12,997.69
3018 Gabion box 4x1x1m nr 15,668.00 156.68 15,824.68
3019 Gabion box 4x1.5x1m nr 21,416.00 214.16 21,630.16
3020 Gabion box 4x2x1m nr 31,871.00 318.71 32,189.71
3021 Gabion box 2.5x1x0.3m nr 7,193.00 71.93 7,264.93
3022 Gabion box 2.5x2x0.3m nr 12,727.00 127.27 12,854.27
3023 Gabion box 3x2x0.3m nr 12,523.00 125.23 12,648.23
3024 Gabion box 6x2x0.23m nr 30,582.00 305.82 30,887.82
3040 Shuttered Angle (Racks Iron) 1.6mm thick m 277.00 2.77 279.77
3041 Shuttered Angle (Racks Iron)2mm thick m 380.00 3.80 383.80
Rate 2019
Market price Transport
ITEM DESCRIPTION UNIT (With VAT)
2019 Rs. Cost Rs.
Rs.
Stainless steel Round Tube
3078 Stainless steel 1/2" 1 Bar 1,679.00 16.79 1,695.79
3079 Stainless steel 3/4" 1 Bar 2,553.00 25.53 2,578.53
3080 Stainless steel 1" 1 Bar 3,358.00 33.58 3,391.58
3081 Stainless steel 1 1/4" 1 Bar 4,140.00 41.40 4,181.40
3082 Stainless steel 1 1/2" 1 Bar 5,520.00 55.20 5,575.20
3083 Stainless steel pipe (1.2 mm thick) 1 1/2" 1m 1,380.00 13.80 1,393.80
3084 Stainless steel pipe (1.2 mm thick) 2" 1m 1,668.00 16.68 1,684.68
3085 Stainless steel cups 2 1/2" nr 403.00 4.03 407.03
3086 Stainless steel cups 2" nr 115.00 1.15 116.15
3087 Stainless steel cups 1 1/2" nr 104.00 1.04 105.04
3088 Stainless steel cups 1/2" nr 81.00 0.81 81.81
3089 Stainless steel ball 3 1/2" nr 599.00 5.99 604.99
3090 Stainless steel ball 3" nr 575.00 5.75 580.75
3091 Stainless steel ball 2 1/2" nr 518.00 5.18 523.18
3092 Stainless steel ball 2" nr 414.00 4.14 418.14
3093 Stainless steel ball 1 1/2" nr 265.00 2.65 267.65
4000 Tempered Glass 4'x4' sheet (5mm) sq.m 5,901.00 59.01 5,960.01
4001 Tempered Glass 4'x4' sheet (6mm) sq.m 7,082.00 70.82 7,152.82
4002 Tempered Glass 4'x4' sheet (8mm) sq.m 8,155.00 81.55 8,236.55
4003 Tempered Glass 4'x4' sheet (10mm) sq.m 10,301.00 103.01 10,404.01
4004 Tempered Glass 4'x4' sheet (12mm) sq.m 5,843.00 58.43 5,901.43
RATE FOR
ITEM DESCRIPTION UNIT
2019
A - DEMOLISHER
Removing the existing Wash Basin pipe lines and stacking salvage materials and
A-08 nr 1,005.00
clearing debris as directed.
A-11 Removing door or window, size up to 3.7 sq.m. from existing walls and stacking. nr 1,680.00
A-12 Removing door or window, size over 3.7 sq.m. from existing walls and stacking. nr 2,520.00
Removing only the door or window sashes size up to 3.7 sq.m. from existing
A-13 nr 261.00
frame and stacking.
Removing only the door or window sashes size over 3.7 sq.m. from existing
A-14 nr 389.00
frame and stacking.
Removing the G.I, old or decayed 85mm to150mm dia Down Pipes from
A-15 m 57.00
existing building and stacking.
Removing the PVC old 85mm to150mm dia Down Pipes from existing building
A-16 m 41.00
and stacking.
A-17 Demolishing the Existing Drains and clearing debris. m 168.00
A-18 Removing Expanded metal works from existing frames and stacking. m² 367.00
Removing existing Barbed Wire Fence by uprooting, rolling up the barbed wire,
A-19 m 262.00
stacking salvage materials and clearing debris (length of the fence to be measured)
Demolishing Brick Paved Floor, stacking the salvage bricks and clearing away the
A-20 m² 398.00
debris.
A-21 Removing the Glass Panes in doors, windows, fanlights, etc. and stacking. m² 830.00
A-22 Removing the Eave Gutters from roof and stacking. m 38.00
Removing Wooden Partitions and stacking at site including making good to walls
A-23 m² 749.00
and floors.
A-24 Removing Lime sand plastering by chipping and clearing away debris. m² 90.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Removing the Plastering or Rendering with cement sand mortar by chipping and
A-25 m² 203.00
clearing away the debris in brick walls and brick paved floors.
Removing the Plastering or Rendering with cement sand mortar by chipping
A-26 and clearing away the debris in Cement concrete walls and Cement concrete m² 305.00
paved floors.
Removing tiles and timber of roof, stacking serviceable materials and clearing
A-27 m² 313.00
debris.
Demolishing Rubble Masonry Work with cement sand mortar, stacking rubble
A-28 m³ 2,041.00
and clearing debris.
A-29 Demolishing Wall or Floor Tiles and clearing away the debris. m² 362.00
A-30 Removing Calicut or Half Round Tiles from roofs and stacking at site. m² 149.00
Removing Asbestos Ceiling including timber frame work, stacking serviceable
A-31 m² 446.00
materials and clearing away the debris.
Removing Valance and Barge boarding, stacking serviceable materials and
A-32 m 38.00
clearing away the debris.
Removing Soffit Plastering with cement sand mortar and clearing away the
A-33 m² 280.00
debris.
B - EXCAVATOR
Excavation for Drains to gradient and shape as directed, in any soil except rock
B-01 requiring blasting and depositing the excavated soil within the site, as directed. m³ 845.00
(Bank volume).
Excavation for Foundation in any material except rock requiring blasting,
B-02 levelling and well ramed under foundation.materials within the site as directed m³ 993.00
-Depth 0~1.5m (Bank volume).
Excavation for Foundation in any material except rock requiring blasting,
B-03 levelling and well ramed under foundation. materials within the site as m³ 1,587.00
directed -Depth 1.5~3.0m (Bank volume).
B-04 Rock excavation by blasting and piling as directed (Piled loose volume). m³ 3,743.00
Excavation for Wells in any material except rock requiring blasting and depositing
B-05 m³ 993.00
the excavated soil within 30m distance as directed -Depth 0~1.5m (Bank volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-06 the excavated soil within 30m distance as directed Depth 1.5~3.0m (Bank m³ 1,587.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-07 the excavated soil within 30m distance as directed -Depth 3.0~4.5m (Bank m³ 2,180.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-08 the excavated soil within 30m distance as directed - Depth 4.5~6.0m (Bank m³ 2,774.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-09 the excavated soil within 30m distance as directed -Depth 6.0~7.5m (Bank m³ 3,368.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-10 the excavated soil within 30m distance as directed -Depth 7.5~9.0m (Bank m³ 3,961.00
volume).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Excavation for Wells in any material except rock requiring blasting and depositing
B-11 the excavated soil within 30m distance as directed -Depth 9.0~10.5m (Bank m³ 4,555.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-12 the excavated soil within 30m distance as directed -Depth 10.5~12m (Bank m³ 5,149.00
volume).
Excavation manually for leveling site in any materials except rock requiring
B-13 blasting, including transporting excavated soil up to 0.4Km , depositing and m³ 658.00
leveling as directed. (Bank volume).
Excavate by machine for leveling site in any materials except rock requiring
B-13A blasting, including transporting excavated soil up to 0.4Km , depositing and m³ Deleted
leveling as directed. (Bank volume).
Filling under floors by spreading, watering and compacting with approved quality
B-14 earth/gravel/sand in 75mm layers by manually as directed (earth/gravel/sand m³ 1,510.00
available at site) - Compacted volume. (Less than 50 m³.)
Filling under floors by spreading, watering and compacting with approved quality
Earth imported from outside in 75mm layers by manually as directed (Cost of
B-15 m³ 2,065.00
transport of sand should be added separately) - Compacted volume.(Less than 50
m³.)
Filling under floors by spreading, watering and compacting with approved
B-16 quality earth in 150mm layers by machinery as directed (earth available at site) m³ 706.00
- Compacted volume. (more than 50 m³.)
Filling under floors by spreading, watering and compacting with approved quality
Earth imported from outside in 150mm layers by machinery as directed (Cost of
B-17 m³ 1,189.00
transport of sand should be added separately) - Compacted volume.(more than 50
m³.)
Filling under floors by spreading, watering and compacting with approved quality
B-18 Gravel imported from outside in 75mm layers by manually as directed (Cost of m³ 2,179.00
transport of gravel should be added separately) - Compacted volume.
Filling under floors by spreading, watering and compacting with approved quality
B-19 Sand imported from outside in 75mm layers by manually as directed (Cost of m³ 4,933.00
transport of sand should be added separately) - Compacted volume.
Filling under floors by spreading, watering and compacting with approved quality
Quarry dust imported from outside in 75mm layers by manually as directed.
B-20 m³ 2,893.00
Rate shall include 30% of 4mm couse particle (Cost of transport Quarry dust of
should be added separately) - Compacted volume.
Cutting and removing trees between 601 -1200 mm girth incuding cutting into
B-22 required number of pieces including disposal as directed. Minimum piece shall not nr Deleted
be less than 2 m in length.
Cutting and removing trees (including stump) between 601 -1200 mm girth
B-22A incuding cutting into required number of pieces including disposal as directed. nr Deleted
Minimum piece shall not be less than 2 m in length.
RATE FOR
ITEM DESCRIPTION UNIT
2019
C - CONCRETER
Concrete should be mixed using concrete mixers and poker vibrators should be
used to vibrate concrete. Hand mixing of concrete should only be allowed for
Note
concrete less than 2.83 m³ and unavoidable situations and prior approval should
be obtained from the Engineer.
The rate shall include for plant mixing , handling, hoisting, depositing,
compressing, vibrating of concrete and curing, making good after removal of Note
formwork etc.
Reinforcement and formwork shall be paid separately unless stated in the
Note
description.
Approved for the concrete test report should be obtain by the Engineer.
If concrete redymix is used for SSR provide approved shoud be obtain from
Director Building or Head of the Department.
Ordinary Portland cement should be used unless stated in the description. Note
C-01 Mixing, placing, vibrating and curing 1:2:4(20mm) concrete (Hand mixing). m³ 18,701.00
C-02 Mixing, placing, vibrating and curing 1:2:4(20mm) concrete (Machine mixing). m³ 18,563.00
C-03 Mixing, placing, vibrating and curing 1:3:6(50mm) concrete (Hand mixing). m³ 15,800.00
C-04 Mixing, placing, vibrating and curing 1:3:6(50mm) concrete (Machine mixing). m³ 15,662.00
C-05 Mixing, placing, vibrating and curing 1:2½:5(25mm) concrete (Hand mixing). m³ 17,310.00
C-06 Mixing, placing, vibrating and curing 1:2½:5(25mm) concrete (Machine mixing). m³ 17,172.00
C-07 Mixing, placing, vibrating and curing 1:3:6(25mm) concrete (Hand mixing). m³ 16,220.00
C-08 Mixing, placing, vibrating and curing 1:3:6(25mm) concrete (Machine mixing). m³ 16,082.00
C-09 Mixing, placing, vibrating and curing 1:3:6(38mm) concrete (Hand mixing). m³ 15,800.00
C-10 Mixing, placing, vibrating and curing 1:3:6(38mm) concrete (Machine mixing). m³ 15,662.00
C-11 Mixing, placing, vibrating and curing 1:1½:3(20mm) concrete (Hand mixing). m³ 21,790.00
C-12 Mixing, placing, vibrating and curing 1:1½:3(20mm) concrete (Machine mixing). m³ 21,652.00
C-13 Mixing, placing, vibrating and curing 1:1½:3(12.5mm) concrete (Hand mixing). m³ 21,790.00
C-14 Mixing, placing, vibrating and curing 1:1½:3(12.5mm) concrete (Machine mixing). m³ 21,652.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and placing 75mm thick Slab over drains in 1:2:4(20mm) concrete
C-28 reinforced with Y10@ 150mm c/c both ways. Rate shall include reinforcement m² 4,503.00
and necessary formwork.
Supplying and fixing 100mmx75mmx50mm Spur Stone in 1:2:4(20mm)
C-29 nr 112.00
concrete for door posts including necessary formwork.
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column footings
C-30 m³ 18,701.00
(Hand mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column footings
C-31 m³ 18,563.00
(Machine mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column shafts
C-32 m³ 19,637.00
(Hand mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column shafts
C-33 m³ 19,499.00
(Machine mixing).
RATE FOR
ITEM DESCRIPTION UNIT
2019
D - FORMWORK
Rate shall include for all necessary boarding, supports, erecting, framing, cutting
Note
angles, striking or removal cleaning wetting etc.
Formwork is measured as the next contact surface measurement between
Note
concrete and formwork.
Local timber formwork should be used only for minor works. Note
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-01 m² 753.00
timber planks for Column Footings.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-02 m² 1,947.00
timber planks for Column Shafts.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-03 m² 1,539.00
timber planks for Beams.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-04 m² 1,199.00
timber planks for plinth on ground floor.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-04A m² 1,505.00
plywood sheets for plinth on ground floor.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-05 m² 1,623.00
timber planks for Stair Cases.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-06 m² 1,856.00
timber planks for Slabs.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-07 m² 1,759.00
plywood sheets for Column Footings.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-08 m² 2,335.00
plywood sheets for Column Shafts.
Supplying, fabricating, fixing and removing formwork using 18mm thick
D-09 m² 1,844.00
plywood sheets for Beams.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-10 m² 2,058.00
plywood sheets for Stair Cases.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-11 m² 2,292.00
plywood sheets for Slabs.
Supplying, fabricating, fixing and removing formwork using 15 mm thick
D-12 m² 1,645.00
plywood sheets for Column Footings.
Supplying, fabricating, fixing and removing formwork using 15 mm thick
D-13 m² 2,195.00
plywood sheets for Column Shafts.
RATE FOR
ITEM DESCRIPTION UNIT
2019
E - REINFORCEMENT
All steel reinforcement should be from cold worked deformed bars and mild steel
bars and carry SLS certificate or equivalent acceptable quality assurance
certificate indicating the yield strength and others as approved by the Engineer.
Rate to include for cutting, bending, fabricating and placing in position holding
Note
and supporting including temporary fixing support hangers, binding wires and
necessary cover blocks as approved by the Engineer. The minimum yield strength
of steel to be as follows.
Tor steel : 460 N/mm² Mild steel : 250 N/mm².
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Mild
E-01 Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc kg 295.00
(Diameter equal to 6mm).
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Mild
E-02 Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc ( kg 298.00
Diameter greater than 6mm).
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Tor
E-03 kg 299.00
Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Rates shall include for all rough and fair cutting plumbing angles forming rebated
reveals rough arches making out joints for outing plastering etc, cutting and
pinning forming or cutting chases making good and sundry items of like nature.
Note
The sizes of the cement blocks to be used are mentioned in the descriptions and
only ±5% deviation can be allowed. The quality of Bricks/cement blocks should be
approved by the engineer.
Brick work in 1:5 cement and sand mortar in foundation up to DPC level ( Size of
F-01 m³ 16,798.00
the brick should be L=220mm, W=105mm, H≤65mm ).
Brick work in 1:5 cement and sand mortar in foundation up to DPC level ( Size of
F-02 m³ 13,599.00
the brick should be L=220mm, W=105mm, H=65~100mm ).
Brick work in 1:5 cement and sand mortar in brick piers ( Size of the brick should
F-03 m³ 19,383.00
be L=220mm, W=105mm, H≤65mm ).
Brick work in 1:5 cement and sand mortar in brick piers ( Size of the brick should
F-04 m³ 16,111.00
be L=220mm, W=105mm, H=65~100mm ).
225mm thick brick work in 1:5 cement and sand mortar above DPC level.( Size of
F-05 m³ 17,670.00
the brick should be L=220mm,W=105mm,H≤65mm ).
225mm thick brick work in 1:5 cement and sand mortar above DPC level. ( Size of
F-06 m³ 14,435.00
the brick should be L=220mm, W=105mm, H=65~100mm ).
225mm thick brick work in 1:5 cement and sand mortar using wire cut bricks (
F-07 m³ 28,762.00
Size of the brick should be L=220mm, W=105mm, H=65mm ).
225mm thick brick work in 1:5 cement and sand mortar using batik bricks ( Size
F-08 m³ 29,327.00
of the brick should be L=220mm, W=105mm, H=65mm ).
112mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-09 m² 2,137.00
be L=220mm, W=105mm, H≤65mm ).
112mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-10 m² 1,743.00
be L=220mm, W=105mm, H=65~100mm ).
112mm thick brick work in 1:5 cement and sand mortar using wire cut bricks (
F-11 m² 3,418.00
Size of the brick should be L=220mm, W=105mm, H=65mm ).
112mm thick brick work in 1:5 cement and sand mortar using batik bricks
F-12 m² 3,497.00
(Size of the brick should be L=220mm, W=105mm, H=65mm ).
150mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-13 m² 1,824.00
be L=220mm, W=150mm, H=65~100mm ).
300 mm wide brick drains with 450mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-14 m 3,532.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300 mm wide brick drains with 750mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-15 m 4,127.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
RATE FOR
ITEM DESCRIPTION UNIT
2019
300 mm wide brick drains with 900mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-16 m 4,443.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300 mm wide brick drains without ramp in 1:5 cement sand mortar with
225mm to 300mm average depth, 75mm thick base and 112mm thick side walls
F-17 m 2,959.00
inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 450mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-18 m 2,932.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 750mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-19 m 3,545.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 900mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-20 m 3,842.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains without ramp in 1:5 cement sand mortar with
150mm to 225mm average depth, 75mm thick base and 112mm thick side walls
F-21 m 2,359.00
inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300mm wide, 225mm high brick steps in 1:3 cement, sand mortar and rendering
F-22 with 12mm thick 1:3 cement, sand mortar inclusive of foundations 150mm below m 1,748.00
ground level.
150 mm thick solid cement block in 1:5 cement sand mortar. ( Size of the
F-23 m² 2,549.00
cement block should be L=390mm x W=150mm x H=190mm)
100 mm thick solid cement block in 1:5 cement sand mortar. ( Size of the
F-24 m² 1,733.00
cement block should be L=390mm x W=100mm x H=190mm)
150 mm thick Hollow cement block in 1:5 cement sand mortar with cavities un
F-25 filled. ( Size of the Hollow cement block should be L=390mm x W=150mm x m² 2,203.00
H=190mm)
200 mm thick Hollow cement block in 1:5 cement sand mortar with cavities un
F-26 filled. ( Size of the Hollow cement block should be L=390mm x W=200mm x m² 2,462.00
H=190mm)
RATE FOR
ITEM DESCRIPTION UNIT
2019
G - MASONARY WORK
20 mm thick DPC in 1:3 cement sand mix finished with two coats of DPC tar and
G-01 m² 1,276.00
blinded with sand.
Random Rubble Masonry work for foundations in 1:5 cement, sand mortar using
G-02 m³ 13,027.00
150mm x 225 mm approved quality rubble.
Random Rubble Masonry work for retaining walls in 1:5 cement, sand mortar
G-03 m³ 12,256.00
using 150mm x 225 mm approved quality rubble.
300mm wide, 225mm high masonry steps in 1:5 cement, sand mortar and
G-04 rendering with 12mm thick 1:3 cement, sand mortar inclusive of foundations m 1,334.00
150mm below ground level.
G-05 Supplying and laying 110mm (4") Type PNT 9 PVC pipes as weep hole. m 2,171.00
G-06 Supplying and laying 90mm (3") Type PNT 9 PVC pipes as weep hole. m 1,469.00
G-07 Supplying and laying 63mm (2") Type PNT 9 PVC pipes as weep hole. m 748.00
Packing rubble and aggregate filter layers behind masonry wall.( Rubble should be
G-08 m³ 1,079.00
paid separately)
H - PAVIOR
If the project is situated in very remote area SSR shall be forwarded for the
approvel of the Director Building or Head of the Department.
Anti termite treatment for floor. The method of treating and the chemicals to be
H-01 used should be approved by the Engineer and minimum 10 year warranty m² 317.00
certificate from a recognized organization should be provided.
Application of liquid polymer cement water proofing agent for flat roofs, concrete
or masonry tanks, wet areas of toilets and bathrooms, exposed balconies, concrete
gutters, etc . The water proofing should be done by a specialized sub contractor
H-02 m² 1,830.00
registered at ICTAD and at least 5 year warranty certificate should be provided.
The water proofing material and the method of water proofing should be
approved by the engineer.
Application two coat of liquid polymer cement water proofing agent for flat roofs,
concrete or masonry tanks, wet areas of toilets and bathrooms, exposed balconies,
H-03 m² 668.00
concrete gutters, etc. The water proofing material and the method of water
proofing should be approved by the engineer.
H-04 Expansion joints in concrete floors, filled with 12mm regiform. m 92.00
Supplying and laying G1000 polythene as damp proof membrane with 150mm
H-05 m² 230.00
laps after preparing surface as directed.
Supplying and Laying 220mm x 110mm x80mm size (strength class 25N/mm²)
Interlocking blocks. (Price range Rs.35.00-Rs.40.00) on 50mm thick compacted
H-06 m² 1,910.00
Quary dust layer. Cost of transport of material should be added seperately.
(Colour, pattern and the quality should be approved by the engineer.)
RATE FOR
ITEM DESCRIPTION UNIT
2019
75 mm thick brick paved floor in 1:5 cement, sand mortar and 12mm thick
H-07 m² 2,264.00
cement rendering in 1:2 cement, sand mortar finished smooth with cement putty.
J- TILER
Rates shall include for temporary rules and all normal cutting, arises rounded
angles and the like nature making good around pipes, sanitary fittings and other
Note
fixtures protection and cleaning.The quality and type of tile should be
approved by the engineer.)
Supplying and laying 300mmx300mm Non Skid Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-05 m² 4,124.00
and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the
quality should be approved by the engineer).Price range Rs.153.00-Rs.196.00
Supplying and laying 450mmx450mm Non Skid Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-06 m² 4,583.00
and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the
quality should be approved by the engineer) Price range Rs.460.00-Rs.468.00 .
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying 600mmx300mm semi Glazed Floor Tiles with exceptional
quality, including 12mm thick tile bedding in 1:3 cement sand mortar and pointing
J-20 m² 6,112.00
with tile grout similar to the colour of tiles.(Colour, pattern and the quality should
be approved by the engineer).Price range Rs.486.00-Rs.740.00
Supplying and laying 100mm high Non Skid Ceramic Floor Tile Skirting with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-22 m 454.00
and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the
quality should be approved by the engineer).Price range Rs.153.00-Rs.196.00
Supplying and laying 100mm high Non Skid Homogeneous Ceramic Floor Tile
Skirting with exceptional quality, including 12mm thick tile bedding in 1:3
J-23 cement sand mortar and pointing with tile grout similar to the colour of m 543.00
tiles.(Colour, pattern and the quality should be approved by the engineer).Price
range Rs.208.00-Rs.250.00
Supplying and laying 100mm high Ceramic Floor Tile Skirting with exceptional
quality, including 12mm thick tile bedding in 1:3 cement sand mortar and pointing
J-24 m 409.00
with tile grout similar to the colour of tiles.(Colour, pattern and the quality should
be approved by the engineer).Price range Rs.131.00-Rs.142.00
Supplying and laying 150mm high Non Skid Homogeneous Ceramic Floor Tile
for stair cases & narrow places with exceptional quality, including 12mm thick
J-25 tile bedding in 1:3 cement sand mortar and pointing with tile grout similar to the m Deleted
colour of tiles.(Colour, pattern and the quality should be approved by the
engineer).Price range Rs.35.00-Rs.40.00
Supplying and laying 300mmx300mm Matt Ceramic Floor Tiles for Bath Room
with exceptional quality, including 12mm thick tile bedding in 1:3 cement sand
J-26 mortar and pointing with tile grout similar to the colour of tiles.(Colour, pattern m² 4,503.00
and the quality should be approved by the engineer).Price range Rs.153.00-
Rs.196.00
J-27 Supplying and laying approved quality PVC beading. m 146.00
J-28 Supplying and laying approved quality stainless steel beading. m 231.00
Supplying and fixing 100mm high Timber Skirting in 20mm thick special class
J-29 timber with treating timber with wood preservative and applying two coats of m 577.00
enamel paint or varnish as directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
K-ROOFER
A. Organization should be provide certificate with 10 years warranty for the
Note
treated timber.
B. Technical specification of the treating materials using and other technical
information regarding the treating methed should be attached the tender.
C. Timber should be treated by vacuum pressure impregnation technique with
following specification.
i. Preservation are forced into the timber using a pressure of 200psi which
penetrate deep in to the wood & gent fixed inside the wood cells.
ii. Preservatives do not get washed/leached off after treatment.
iii. Pleasant appearance.
iv. clean to handle.
v. Odorless.
vi. Preservatives used are harmless to humans, animals & plant life.
vii. Easy to paint, polish & glue.
D. Timber transport by the client.
E. All timber are Micro timber.
Supplying and roofing with Corrugated asbestos roofing sheets on class 1 or
above timber frame consist of 100mmx50mm rafters (maximum spacing 0.9m)
and 50mmx50mm bearers with maximum spacing of 1200mm centre to centre.
K-01 Each asbestos sheet should be supported by three bearers and should be fixed to m² 2,663.00
each bearer in two positions using J-bolts. Rate shall include treating timber with
approved quality wood preservative. (Quality of timber and asbestos sheets
should be approved by the engineer).
Supplying and roofing with Corrugated asbestos roofing sheets on imported
treated timber consist of 100mmx50mm rafters (maximum spacing 0.9m) and
50mmx50mm bearers with maximum spacing of 1200mm centre to centre. Each
K-02 asbestos sheet should be supported by three bearers and should be fixed to each m² 3,440.00
bearer in two positions using J-bolts. Rate shall include treating timber with
approved quality wood preservative. (Quality of timber and asbestos sheets
should be approved by the engineer).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and roofing with ASA (Acrylonitrile Styrene Acrylate) roofing sheets
(Thick not less than 2.8mm ) on 100x50x2mm sized C channel purling at a
maximum spacing of 750mm centre to centre including painting steel work with
K-04A two coats of anticorrosive paint. Each sheet should be supported to the purling by m² 3,930.00
water proof cover and self tapping screws to each purling. ( ASA sheets quality
and C channel should be approved by the engineer)
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on class 1 or above timber frame consist of 100mmx50mm
K-12 m² 2,392.00
purling with maximum spacing of 1200mm centre to centre. ( Quality of timber
and Brand, Profile and Colour of the sheets should be approved by the engineer).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on class 1 or above timber frame consist of 150mmx75mm
K-13 m² 2,666.00
purling with maximum spacing of 1500mm centre to centre. ( Quality of timber
and Brand, Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 100x50x2mm galvanized lip panel frame work with all
K-14 m² 2,895.00
specials (Brand, Profile and Colour of the sheets should be approved by the
engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 50x50x5.8mm angle iron frame work with all specials. Rate
K-15 m² 2,788.00
shall include applying two coats of anticorrosive paint to all steel work. (Brand,
Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 62.5x62.5x5.8mm angle iron frame work with all specials.
K-16 m² 3,227.00
Rate shall include applying two coats of anticorrosive paint to all steel work.
(Brand, Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
K-17 roofing sheets on existing frame work with all specials (Brand, Profile and m² 1,671.00
Colour of the sheets should be approved by the engineer).
Supplying and laying approved quality double side 3 -4mm thick Aluminum
K-18 Foil and 3"x3" mesh(Gauge 17) with necessary fasteners, etc.as directed ( m² 420.00
Quality of foil and mesh should be approved by the engineer).
Supplying and laying approved quality double side 3-4 mm thick Aluminum
K-19 Foil without mesh and with necessary fasteners, etc.as directed ( Quality m² 243.00
of foil should be approved by the engineer).
Supplying and roofing with approved quality Calicut Pattern Tiles on class 1
timber frame work consist of 100x50mm rafters and 50x25mm reapers and
K-20 m² 4,339.00
treating timber with approved quality wood preservative ( Quality of timber and
tiles should be approved by the engineer).
Supplying and roofing with Calicut pattern tiles on timber frame work using
K-21 available tiles and timber including treating timber with approved quality wood m² 869.00
preservative.
Supplying, fabricating and fixing 50x50x5.8 mm double angle iron rafters using
12mm bolt and nut including applying 2 coats of anticorrosive paint. Rate shall
K-22 m 2,036.00
include necessary cleats for fixing purling and anchor rods, concrete and
formwork required for fixing to walls as directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 75x75x5.8 mm double angle iron rafters using
12mm bolt and nut including applying 2 coats of anticorrosive paint. Rate shall
K-24 m 3,752.00
include necessary cleats for fixing purling and anchor rods, concrete and
formwork required for fixing to walls as directed.
Supplying, fabricating and fixing Steel Roof Truss of 20'-0" span using 50x50x5.8
mm angle iron as per detailed drawing no. 01 including applying 2 coats of
K-25 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 60,368.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Truss of 25'-0" span using 50x50x5.8
mm angle iron as per detailed drawing no. 02 including applying 2 coats of
K-26 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 77,550.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Truss of 30'-0" span using
62.5x62.5x5.8 mm angle iron as per detailed drawing no. 03 including applying 2
K-27 coats of anticorrosive paint to all steel work. Rate shall include necessary cleats nr 110,737.00
for fixing purling and anchor bolts, pressure plates and truss plates as directed by
the engineer.
Supplying, fabricating and fixing Steel Roof Truss of 40'-0" span using 75x75x5.8
mm angle iron as per detailed drawing 04 including no. 04 applying 2 coats of
K-28 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 178,643.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 300mm wide using
50x50x5.8 mm double angle iron main bars and 50x50 x5.8 mm angle iron
distribution bars as per detailed drawing. including applying 2 coats of
K-29 m 9,518.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 450mm wide using
50x50x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing no. 05 including applying 2 coats of
K-30 m 10,677.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 600mm wide using
62.5x62.5x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing no. 06 including applying 2 coats of
K-31 m 12,981.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 900mm wide using
75x75x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing including applying 2 coats of
K-32 m 14,663.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 0.47mm thick Zink Aluminum ridge capping of girth
K-33 470mm to match the colour of the roof. Rate shall include all necessary fasteners, m 1,316.00
etc.
Supplying and fixing Ridging "v"shape with asbestos cement close fitting
K-34 m 952.00
ridges with necessary bolts, etc.
Supplying and fixing Ridging with asbestos cement close fitting ridges with
K-34A m 1,813.00
necessary bolts, etc.
Ridging with approved quality ridge tiles including bedded in 1:1:4 cement, lime,
K-35 m 661.00
sand mortar coloured to match tiles.
Ridging with approved quality ASA ridges including ridge end cap for coners and
K-35A m 1,329.00
ridge fix to roof by water proof cap with self taping screws.
Ridging with available ridge tiles including bedded in 1:1:4 cement, lime, sand
K-36 m 411.00
mortar coloured to match tiles.
K-37 Supplying approved quality Calicut pattern tiles to the site. nr 121.00
K-38 Supplying and laying approved quality Calicut pattern tiles as directed. nr 135.00
K-39 Supplying approved quality ridge tiles to the site. nr 102.00
K-40 Shifting and relaying Calicut pattern tiles. m² 60.00
K-41 Laying Calicut pattern tiles in any building with available tiles at site. m² 90.00
The dimensions indicated in the description are the finished sized of timber
Note
members and only ±5% deviation can be allowed.
Supplying and fixing Flat asbestos ceiling with class 1 or above timber
framework consists of 100x50mm joists at 1200mm centers and 50x50mm
bearers at 600mm centers including 38mmx12mm beadings and 38x38mm
moldings of class11 timber. Rate shall include treating all timber work using
L-03 m² 4,046.00
approved quality wood preservatives, applying one coat of primer and 2 coats of
emulsion paint to asbestos sheets and two coats of enamel paint to beadings and
moldings. (Quality of timber, asbestos sheets, beadings and moldings should be
approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing Flat asbestos ceiling with Imported timber or above timber
framework consists of 100x50mm joists at 1200mm centers and 50x50mm
bearers at 600mm centers including 38mmx12mm beadings and 38x38mm
moldings of class11 timber. Rate shall include treating all timber work using
L-03A m² 4,779.00
approved quality wood preservatives, applying one coat of primer and 2 coats of
emulsion paint to asbestos sheets and two coats of enamel paint to beadings and
moldings. (Quality of timber, asbestos sheets, beadings and moldings should be
approved by the engineer)
Supplying and fixing Flat asbestos eave ceiling with class 1or above timber
framework consists of 50x50mm bearers at 600mm centers including
38mmx12mm beadings and 38x38mm moldings of class 1I timber. Rate shall
L-04 include treating all timber work using approved quality wood preservatives, m² 3,425.00
applying one coat of primer and 2 coats of emulsion paint to asbestos sheets and
two coats of enamel paint to beadings and moldings (Quality of timber, asbestos
sheets, beadings and moldings should be approved by the engineer)
Supplying and fixing Flat asbestos eave ceiling with Imported timber or above
timber framework consists of 50x50mm bearers at 600mm centers including
38mmx12mm beadings and 38x38mm moldings of class 1I timber. Rate shall
L-04A include treating all timber work using approved quality wood preservatives, m² 3,825.00
applying one coat of primer and 2 coats of emulsion paint to asbestos sheets and
two coats of enamel paint to beadings and moldings (Quality of timber, asbestos
sheets, beadings and moldings should be approved by the engineer)
Supplying and fixing PVC (W 250mm x H 7.5mm) Flat or Angle ceiling including
frame work.(Average height of the roof 3600mm). The frame of the ceiling is
fabricated using 40mm GI channels (T 0.4mm/ H17mm/ W 45mm) with a 600mm
distance horizontally. The frame is also fixed to the roof purling vertically using
L-04B m² 3,976.00
same GI channels. Reverts are used to fix the ceiling panels and other related
accessories (reverts, screws, concrete nails, silicon gum,etc,) such as moldings,PVC
Corners(U /H/ L) (Quality of PVC ceiling sheet , Moldings, Placing hangers and GI
Channel should be approved by the enginner.)
Supplying and fixing 12 mm thick plywood ceiling with class 1 or above timber
framework consists of 100x50 mm joints at 1200mm centers and 50x50mm
L-05 bearers at 600mm centers including 38x12mm beading 38x38mm moldings of m² 3,702.00
class1I timber. Rate shall include treating all timber work using approved quality
wood preservatives, (Painting on plywood sheet will be paid separately)
Supplying and fixing Lunumidella timber ceiling with class 1 or above timber
framework consists of 100x50 mm joints at 1200mm centers and 50x50mm
bearers at 600mm centers including 38x38mm moldings of class I1 timber. Rate
L-06 m² 4,778.00
shall include treating all timber work using approved quality wood preservatives,
applying one coat of approved quality wood primer and 2 coats of polyurethane
varnish to new lunumdella wood after preparing surface as directed
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in special class timber with 100x75mm frame in
special class timber complete with brass or equivalent approved quality
L-07 m² 16,424.00
furniture including one coat of wood primer and two coats of enamel painting to
wood work. ( Type and brand of door lock to be decided according to type of work
and to be paid separately)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in special class timber to existing frame complete
L-08 with brass or equivalent approved quality furniture including one coat of wood m² 10,541.00
primer and two coats of enamel painting to wood work. ( Type and brand of door
lock to be decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in class 1 timber to existing frame complete with
L-09 brass or equivalent approved quality furniture including one coat of wood primer m² 9,558.00
and two coats of enamel painting to wood work. ( Type and brand of door lock to
be decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber with
100x75mm frame in special class timber complete with brass or equivalent
L-10 approved quality furniture including one coat of wood primer and two coats of m² 21,554.00
enamel painting to wood work. ( Type and brand of door lock to be decided
according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber with
100x75mm frame with top louvers in special class timber complete with brass
L-11 or equivalent approved quality furniture including one coat of wood primer and m² 23,376.00
two coats of enamel painting to wood work. ( Type and brand of door lock to be
decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber to
existing frame complete with brass or equivalent approved quality furniture
L-12 including one coat of wood primer and two coats of enamel painting to wood m² 16,065.00
work. (type and brand of door lock to be decided according to type of work and to
be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash with
100x75mm frame in special class timber complete with brass or equivalent
L-13 approved quality furniture including one coat of wood primer and two coats of m² 11,934.00
enamel painting to wood work. ( Type and brand of door lock to be decided
according to type of work and to be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash with
100x75mm frame with top louvers in special class timber complete with brass
L-14 or equivalent approved quality furniture including one coat of wood primer and m² 13,747.00
two coats of enamel painting to wood work. ( Type and brand of door lock to be
decided according to type of work and to be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash to
existing frame in special class timber complete with brass or equivalent approved
L-15 quality furniture including one coat of wood primer and two coats of enamel m² 7,382.00
painting to wood work. ( Type and brand of door lock to be decided according to
type of work and to be paid separately)
Supplying and fixing approved quality P.V.C. door with frame with all necessary
L-16 m² 7,738.00
fittings and lock as directed (Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber with 100x75mm frame in special class timber
L-17 complete with brass or equivalent approved quality furniture, casement fasteners, m² 22,396.00
casement stays, window ring, etc including one coat of wood primer and two
coats of enamel painting to wood work.
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber with 100x75mm frame with top louvers in
L-18 special class timber complete with brass or equivalent approved quality m² 24,540.00
furniture, casement fasteners, casement stays, window ring, etc including one
coat of wood primer and two coats of enamel painting to wood work.
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber to existing frame in special class timber
L-19 complete with brass or equivalent approved quality furniture, casement fasteners, m² 15,864.00
casement stays, window ring, etc including one coat of wood primer and two
coats of enamel painting to wood work.
Supplying and fixing 100x75mm door or widow frame in special class timber
L-20 m 2,694.00
including one coat of wood primer and two coats of enamel painting to wood work
RATE FOR
ITEM DESCRIPTION UNIT
2019
M - BRASS FOUNDER
M-01 Supplying and fixing approved quality night latch (Grade II) lock as directed nr 1,736.00
Fixing front door type lock as directed ( Cost of supplying the lock is not included
M-02 nr 1,296.00
to the rate and should be paid separately as per client's requirement)
Supplying approved quality door lock as per given specifications. Door lock should
M-03 be approved by the engineer and minimum market price should be Rs.1,000/= ( nr 1,200.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-04 be approved by the engineer and minimum market price should be Rs.1,500/= ( nr 1,800.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-05 be approved by the engineer and minimum market price should be Rs.2,000/= ( nr 2,400.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-06 be approved by the engineer and minimum market price should be Rs.2,500/= ( nr 3,000.00
Fixing of door lock should be paid separately)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying approved quality door lock as per given specifications. Door lock should
M-07 be approved by the engineer and minimum market price should be Rs.3,000/= ( nr 3,600.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-08 be approved by the engineer and minimum market price should be Rs.3,500/= ( nr 4,200.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
be approved by the engineer and minimum market price should be Rs.4,000/= (
M-09 nr 4,800.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-10 be approved by the engineer and minimum market price should be Rs.4,500/= ( nr 5,400.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-11 be approved by the engineer and minimum market price should be Rs.5,000/= ( nr 6,000.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-11A be approved by the engineer and minimum market price should be Rs6,000/= ( nr 7,200.00
Fixing of door lock should be paid separately)
Supplying and fixing brass or equivalent approved quality 50mm barrel bolt
M-12 nr 547.00
directed
Supplying and fixing brass or equivalent approved quality 100mm barrel bolt
M-13 nr 592.00
directed
Supplying and fixing brass or equivalent approved quality 150mm barrel bolt
M-14 nr 906.00
directed
Supplying and fixing heavy quality brass or equivalent approved quality
M-15 nr 959.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality brass or equivalent approved quality
M-16 nr 1,138.00
150x100mm butt hinges as directed
Supplying and fixing oxidized brass or equivalent approved quality Casement
M-17 nr 655.00
Fasteners with mortise plate as directed
Supplying and fixing oxidized brass or equivalent approved quality 250mm
M-18 nr 578.00
Casement Stays as directed
Supplying and fixing heavy quality oxidized brass or equivalent approved quality
M-19 nr 839.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality oxidized brass or equivalent approved quality
M-20 nr 1,077.00
150x100mm butt hinges as directed
Supplying and fixing copper or equivalent approved quality 50mm barrel bolt
M-21 nr 423.00
directed
Supplying and fixing stainless steel or equivalent approved quality 50mm barrel
M-21A nr 519.00
bolt directed
Supplying and fixing copper or equivalent approved quality 100mm barrel bolt
M-22 nr 489.00
directed
Supplying and fixing copper or equivalent approved quality 150mm barrel bolt
M-23 nr 647.00
directed
RATE FOR
ITEM DESCRIPTION UNIT
2019
N - IRON MONGER
Supplying and fixing 50x50mm G.I. weld mesh (gauge 10) to existing frame using
50x12mm class I timber beadings as directed and applying two coats of enamel
N-01 m² 3,193.00
paint to timber beadings and one coat of anticorrosive paint and two coats of
enamel paint to weld mesh
Supplying and fixing 50x50mm G.I. weld mesh (gauge 10) to 100x75mm class I
timber frame using 50x12mm class I timber beadings as directed and applying
N-02 m² 8,871.00
two coats of enamel paint to all wood work and one coat of anticorrosive paint
and two coats of enamel paint to weld mesh
Fabricating and fixing Diamond Shaped Iron Grill using 6 mm diameter M.S. bars
at 75mm c/c and 70 degree angle to form 75x150mm diamond shaped grill with
N-03 12x5mm flat iron frame work. Rate shall include necessary concrete for m² 4,661.00
installation and applying one coat of anticorrosive paint and two coats of enamel
paint
Fabricating and fixing Diamond Shaped Iron Grill using 6 mm diameter M.S. bars
at 75mm c/c and 70 degree angle to form 75x150mm diamond shaped grill with
N-04 25x25x5(+/-1mm)mm angle iron frame work. Rate shall include necessary m² 5,307.00
concrete for installation and applying one coat of anticorrosive paint and two
coats of enamel paint
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 25x25x5 mm "L" angle lower part up to 1000mm, covered with 0.47
Zn.Alluminium sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper
part consist with diamond shaped iron grill using 5.5mm diameter mild steel rods
N-05 m² 11,066.00
at 75mm C/C and 70 degree to horizontal . Rate should be included lock
arrangement for padlock, hinges & necessary concrete for fixing frame to the wall
for six places. Applying one coat of anticorrosive paint to all steel and two coat of
enamel paint.
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 25x25x5 mm "L" angle lower part up to 1000mm, covered with 18 gage GI
sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper part consist with
N-05A diamond shaped iron grill using 5.5mm diameter mild steel rods at 75mm C/C and m² 11,567.00
70 degree to horizontal . Rate should be included lock arrangement for padlock,
hinges & necessary concrete for fixing frame to the wall for six places. Applying
one coat of anticorrosive paint to all steel and two coat of enamel paint.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 0.4mm thick 25x25mm box bar lower part up to 1000mm, covered with
18 gage GI sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper part
consist with diamond shaped iron grill using 5.5mm diameter mild steel rods at
N-05B m² 10,946.00
75mm C/C and 70 degree to horizontal . Rate should be included lock
arrangement for padlock, hinges & necessary concrete for fixing frame to the wall
for six places. Applying one coat of anticorrosive paint to all steel and two coat of
enamel paint.
Fabricating and fixing 6mm dia. 75mm long mild steel rod (as hook) to drill hole
on 25x5mm plat iron at 200mm c/c and weld the hook on both side of plat iron.
N-06 nr 1,671.00
Rate shall include necessary concrete for fixing to the wall and applying one coat
of anticorrosive paint and two coat of enamel paint.
Supplying and fixing 16mm mild steel bars for windows as directed including
N-07 m 454.00
applying one coat of anticorrosive paint and two coats of enamel paint
Supplying and fixing 20mm mild steel bars for windows as directed including
N-08 m 622.00
applying one coat of anticorrosive paint and two coats of enamel paint
N-09 Supplying and fixing 100x16mm rag bolts with all specials nr 422.00
N-10 Supplying and fixing 100mm safety type Hasp and Staple as directed nr 391.00
N-11 Supplying and fixing 150mm safety type Hasp and Staple as directed nr 396.00
Supplying and fixing heavy quality oxidized iron or equivalent approved quality
N-12 nr 704.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality oxidized iron or equivalent approved quality
N-13 nr 834.00
150x100mm butt hinges as directed
Class room Lock -Supplying and fixing 225mm long safety type Barrel bolt with
N-14 Hasp and Staple stainless steel, specially made complete.as directed. Rate shall nr 2,683.00
include 50mm pad lock.
Fabricating and fixing Iron grill using 12mm diameter M.S. bars at 100mm c/c and
vertical to form with 38 x 5mm fiat iron frame welded to 300mm horizontally
N-15 work as per given instruction by Engineer. Rate shall include necessary fixing wall m² 7,192.00
plug and screws for installation and applying one coat of anticorrosive paint and
two coats of enamel paint
RATE FOR
ITEM DESCRIPTION UNIT
2019
P - ALUMINIUM WORKER
All aluminium extrusions should have the following properties and the brand
should be approved by the Engineer
Alloy : AA 6063
Minimum Tensile Strength : 150 MPa
Minimum Elongation : 7%
Surface Treatments Note
(a) Powder coated
Coating Thickness : 60~80 micron
Colour : To be approved by the Architect/ Engineer
(b) Anodizing - Natural/ Bronze
Coating Thickness : 10~15 micron
If the Cladding and melamine board using for the Door or the Partition able
to issue with SSR.
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 70mm (1.6mm thick) aluminium single Swing
door - Partition door using approved quality natural anodized aluminum
P-40 extrusions with 5mm thick fixed glass on top, mid rail and bottom white board m² 15,402.00
(2.5-3.0 mm), as per detailed drawing no.15/11 including door lock, gaskets, wool
felt, beadings, flush bolt, threaded bar with nut roller, door handles, etc.
Supplying, fabricating and fixing 70mm (1.6mm thick) aluminum single Swing
door - Partition door using approved quality bronze anodized aluminum
extrusions with 5mm thick fixed glass on top, mid rail and bottom white board
P-41 m² 15,617.00
(2.5-3.0 mm),as per detailed drawing no.15/11 including door lock, floor
hinges,gaskets, wool felt, beadings, flush bolt, threaded bar with nut roller, door
handles, etc.
Supplying, fabricating and fixing 70mm (1.2mm thick) aluminium single swing
door / Partition door using approved quality powder coated aluminium
P-42 extrusions with 5mm thick fixed glass on top, mid rail and bottom white m² 16,835.00
board(2.5-3.0 mm), as per detailed drawing no.15/11 including door lock, gaskets,
wool felt, beadings, flush bolt, threaded bar with nut roller, door handles, etc.
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-46 with fixed glazed using approved quality natural anodized aluminium m² 14,882.00
extrusions with 5mm thick fixed glass as per detailed drawing no.15/17
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-47 with fixed glazed using approved quality bronze anodized aluminium m² 14,965.00
extrusions with 5mm thick fixed glass as per detailed drawing no.15/17
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-48 with fixed glazed using approved quality powder coated aluminium extrusions m² 15,740.00
with 5mm thick fixed glass as per detailed drawing no.15/17
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-49 with louvers using approved quality natural anodized aluminium extrusions as m² 21,341.00
per detailed drawing no.15/18
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-50 with louvers using approved quality bronze anodized aluminium extrusions as m² 21,932.00
per detailed drawing no.15/18
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-51 with louvers using approved quality powder coated aluminium extrusions as m² 23,687.00
per detailed drawing no.15/18
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality natural anodized aluminium extrusions
P-59 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 13,818.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
beading, flush bolt, threaded bar with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality bronze anodized aluminium extrusions
P-60 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 13,927.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
flush bolt, threaded bar with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality powder coated aluminium extrusions
P-61 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 14,656.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
flush bolt, threaded panneled , with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium louvers door
using approved quality natural anodized aluminium extrusions, as per detailed
P-62 m² 21,554.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminum louvers door
using approved quality brownzd anodized aluminum extrusions, as per detailed
P-63 m² 21,904.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium louvers door
using approved quality powder coated aluminium extrusions, as per detailed
P-64 m² 24,263.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Q - GLAZIER
Q-01 Supplying and fixing 5mm thick figured glass panes using class I timber beadings m² 3,993.00
Q-02 Supplying and fixing 3mm thick figured glass panes using class I timber beadings m² 2,832.00
Q-03 Supplying and fixing 5mm thick clear glass panes using class I timber beadings m² 3,338.00
Q-04 Supplying and fixing 3mm thick clear glass panes using class I timber beadings m² 2,755.00
Q-05 Supplying and fixing 5mm thick tinted glass panes using class I timber beadings m² 4,285.00
Q-06 Supplying and fixing 3mm thick tinted glass panes using class I timber beadings m² 3,047.00
R - PLASTERER
16mm thick semi rough plaster for walls in 1:1:5 cement lime sand mix finished
R-01 m² 726.00
using trowel
10mm thick semi rough plaster for concrete columns in 1:3 cement sand mix
R-02 m² 1,097.00
finished using trowel
16mm thick rough plaster for walls in 1:1:5 cement lime sand mix finished using
R-03 m² 719.00
sponge.
10mm thick rough plaster for concrete columns in 1:3 cement sand mix finished
R-04 m² 1,090.00
using sponge.
10mm thick rough plaster for Retaining walls in 1:3 cement sand mix finished
R-04A m³ 803.00
using sponge.
16mm thick smooth plaster for walls in 1:1:5 cement lime sand mix finished
R-05 m² 939.00
smooth with lime putty
10mm thick smooth plaster for concrete columns in 1:3 cement sand mix
R-06 m² 1,106.00
finished smooth with lime putty
10mm thick smooth soffit plaster for concrete slabs, beams and stair cases in 1:3
R-07 m² 1,106.00
cement sand mix finished smooth with lime putty
Repairing cracks in walls by plastering in 1:3 cement sand mix after chipping
R-08 m 318.00
100mm to 150mm width and installing a chicken mesh using concrete nails
25mm thick and 100mm ~ 150mm wide mortar bands over roof tiles in 1:1:4
R-09 m 252.00
cement, lime and sand mortar
12x100mm projected skirting in 1:3 cement sand mortar and finished smooth
R-10 m 487.00
with cement floating including forming groove
12x100mm projected skirting in 1:3 cement sand mortar and finished smooth
R-11 m 721.00
with red cement floating including forming groove
20mm thick plinth plaster in 1:3 cement sand mix finished smooth with cement
R-12 m² 959.00
floating
RATE FOR
ITEM DESCRIPTION UNIT
2019
20mm thick plinth plaster in 1:3 cement sand mix finished smooth with
R-13 m² 981.00
coloured cement floating
12mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-14 m² 725.00
cement floating
12mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-15 m² 746.00
coloured cement floating
12mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-16 m² 679.00
cement floating
12mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-17 m² 700.00
coloured cement floating
16mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-18 m² 758.00
cement floating
16mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-19 m² 846.00
coloured cement floating
16mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-20 m² 737.00
cement floating
16mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-21 m² 825.00
coloured cement floating
20mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-22 m² 1,030.00
cement floating
20mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-23 m² 1,049.00
coloured cement floating
20mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-24 m² 959.00
cement floating
20mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-25 m² 981.00
coloured cement floating
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-26 m 518.00
directed (0mm~ 100mm)
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27 m 669.00
directed (100mm~ 225mm)
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27A m 578.00
directed.Aluminium work for 115mm thick wall .
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27B m 1,056.00
directed.Aluminium work for 225mm thick wall .
20mm thick Black or Green Board plaster in 1:3 cement sand mix finished
R-28 smooth with Black or Green cement floating with 38mmx12mm cement m² 981.00
plaster boarder
Supplying and fixing 300mm wide gauge 20 chicken mesh with wire nails (Before
R-29 plastering for internal wall) the junction of concrete and Brick/Cement Block m 218.00
work or two dissimilar materials.
RATE FOR
ITEM DESCRIPTION UNIT
2019
S - PLUMBER
All PVC pipes and fittings shall be of best quality of an approved manufacture. All
pipes shall be measured in linear meters and rates shall include pipe fittings and
extras where stated, solder, rivets, screws, nails, clips, brackets, straps, holder
Note
bats, made bends, if any etc, all laps, straight cutting and wastages, solvent cement
and incidental materials and labour on joining pipes, chasing in brickwork,
concrete surface and making good.
S-01 Supplying and fixing 12mm (1/2") ball valve - Brass nr 1,386.00
S-02 Supplying and fixing 12mm (1/2") ball valve - PVC nr 450.00
S-03 Supplying and fixing 20mm (3/4") ball valve - Brass nr 1,834.00
S-04 Supplying and fixing 20mm (3/4") ball valve - PVC nr 438.00
S-05 Supplying and fixing 25mm (1") ball valve - Brass nr 2,016.00
S-06 Supplying and fixing 25mm (1") ball valve - PVC nr 546.00
S-07 Supplying and fixing 38mm (1 1/2") ball valve - Brass nr 4,016.00
S-08 Supplying and fixing 38mm (1 1/2") ball valve - PVC nr 853.00
S-09 Supplying and fixing 12mm (1/2") bib tap - Brass nr 977.00
Supplying and fixing 12mm (1/2") bib tap - Chromium plated.Prime Cost
S-10 nr 1,762.00
Rs.1,190.00 - 1,300.00
S-11 Supplying and fixing 12mm (1/2") conceal valve - Chromium plated nr 2,257.00
S-12 Supplying and fixing 12mm (1/2") bib tap - PVC nr 613.00
S-13 Supplying and fixing 12mm (1/2") gate valve - Brass nr 1,262.00
S-14 Supplying and fixing 12mm (1/2") gate valve - PVC nr 516.00
S-15 Supplying and fixing 20mm (3/4") gate valve - Brass nr 1,834.00
S-16 Supplying and fixing 20mm (3/4") gate valve - PVC nr 684.00
S-17 Supplying and fixing 25mm (1") gate valve - Brass nr 2,125.00
S-18 Supplying and fixing 25mm (1") gate valve - PVC nr 857.00
S-19 Supplying and fixing 38mm (1 1/2") gate valve - Brass nr 3,155.00
S-20 Supplying and fixing 38mm (1 1/2") gate valve - PVC nr 1,010.00
Supplying and laying 20mm (1/2") (PNT11) PVC pipes with all specials rate
S-21 m 114.00
included presure testing etc.
Supplying and laying 25mm (3/4") (PNT11) PVC pipes with all specials rate
S-22 m 188.00
included presure testing etc.
Supplying and laying 32mm (1") (PNT11) PVC pipes with all specials rate
S-23 m 341.00
included presure testing etc.
Supplying and laying 32mm (1") (PNT9) PVC pipes with all specials rate included
S-24 m 310.00
presure testing etc.
Supplying and laying 40mm (1 1/4") (PNT11) PVC pipes with all specials rate
S-25 m 458.00
included presure testing etc.
Supplying and laying 40mm (1 1/4") (PNT9) PVC pipes with all specials rate
S-26 m 422.00
included presure testing etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying 50mm (1 1/2") (PNT11) PVC pipes with all specials rate
S-27 m 674.00
included presure testing etc.
Supplying and laying 50mm (1 1/2") (PNT9) PVC pipes with all specials rate
S-28 m 617.00
included presure testing etc.
Supplying and laying 50mm (1 1/2") (PNT7) PVC pipes with all specials rate
S-29 m 511.00
included presure testing etc.
Supplying and laying 63mm (2") (PNT11) PVC pipes with all specials rate
S-30 m 1,153.00
included presure testing etc.
Supplying and laying 63mm (2") (PNT9) PVC pipes with all specials rate included
S-31 m 1,050.00
presure testing etc.
Supplying and laying 63mm (2") (PNT7) PVC pipes with all specials rate included
S-32 m 841.00
presure testing etc.
Supplying and laying 75mm (2 1/2") (PNT9) PVC pipes with all specials rate
S-33 m 1,749.00
included presure testing etc.
Supplying and laying 75mm (2 1/2") (PNT7) PVC pipes with all specials rate
S-34 m 1,417.00
included presure testing etc.
Supplying and laying 90mm (3") (PNT9) PVC pipes with all specials rate included
S-35 m 1,987.00
presure testing etc.
Supplying and laying 90mm (3") (PNT7) PVC pipes with all specials rate included
S-36 m 1,497.00
presure testing etc.
Supplying and laying 110mm (4") (PNT9) PVC pipes with all specials rate
S-37 m 2,901.00
included presure testing etc.
Supplying and laying 110mm (4") (PNT7) PVC pipes with all specials rate
S-38 m 2,289.00
included presure testing etc.
Water tap post concrete in 1:2:4 (20), 750mm height from ground and 450mm
deep, 100mmx100mm at top size and 150mmx150mm size at ground level with 4
no of 5.5mm dia. M/S bars and link at150mm c/c . Rate shall include supplying
S-39 nr 4,848.00
and fixing T1000 12mm PVC pipe bib tap and concreting (1:3:6 concreting)
750mmx900mm size 75mm thick basing with suitable slope and 12mm thick 1:3
cement sand rendering.
RATE FOR
ITEM DESCRIPTION UNIT
2019
T - SANITARY FITTINGS
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9 liters capacity high level ceramic cistern
T-09 with PVC flush pipe, 12mm brass stop cock, water supply connection, etc. (Quality nr 10,351.00
should be approved by the engineer)
Supplying and fixing approved quality 9 liters capacity high level ceramic cistern
with PVC flush pipe, 12mm angle valve , water supply connection, etc.(Quality
T-09A nr 16,000.00
should be approved by the engineer)prime cost of,9 liters capacity high level
ceramic cistern (price range Rs. 7,000.00-Rs.9,500.00
Supplying and fixing approved quality 9 liters capacity high level PVC cistern with
T-10 PVC flush pipe, 12mm brass stop cock, water supply connection, etc. (Quality nr 10,349.00
should be approved by the engineer)
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
T-12 A to working order. Minimum 10 year warranty on ceramic ware to be available nr 23,557.00
with manufacturers. (Quality approved by the engineer)Prime cost of,ceramic
closed couple Rs 14,375.00 - Rs 15,525.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
to working order. Minimum 10 year warranty on ceramic ware to be available
T-12 B nr 35,558.00
with manufacturers. (Ideal Standard, American Standard, or equivalent quality
complying to British Standard approved by the engineer) prime cost of,ceramic
closed couple water closet american &british-Rs. 22,195.00 - Rs 25,990.00
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
to working order. Minimum 10 year warranty on ceramic ware to be available
T-12 C nr 52,344.00
with manufacturers. (Ideal Standard, American Standard, or equivalent quality
complying to British Standard approved by the engineer) Prime cost of,ceramic
closed couple water closet american &british-Rs. 35,305.00 - Rs 40,940.00
Supplying and fixing approved quality 9 liters capacity low level ceramic cistern
T-13 with PVC flush pipe, 12mm pvc angle valve, flexible horse, water supply nr 10,660.00
connection, etc. (Quality should be approved by the engineer)
Supplying and fixing approved quality 9 liters capacity low level ceramic cistern
with PVC flush pipe,12mm(1/2") angle valve - chromium plated , pvc flexible
T-13A horse, water supply connection, etc. (Quality should be approved by the engineer) nr 15,985.00
prime cost of,9 liters capacity low level ceramic cistern -Rs.7,935.00 - Rs.
8,510.00
Supplying and fixing approved quality 9 liters capacity low level PVC cistern with
T-14 PVC flush pipe,12mm pvc angle valve, flexible horse water supply connection, etc. nr 9,749.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality 40mm Bottle Trap as directed (Quality
T-16 nr 1,564.00
should be approved by the engineer)
Supplying and fixing approved quality Chromium plated Bidet shower with
T-17 12mm(1/2") angle valve - cromium plated as directed Bidet shower price nr 4,373.00
should be over Rs.1,610.00 and approved by the engineer
Supplying and fixing approved quality PVC Bidet shower with 12mm(1/2")
T-17 B nr 3,309.00
cromium plated angle valve as directed (Approved by the engineer)
Supplying and fixing approved quality PVC seat cover as directed (Quality should
T-18 nr 1,633.00
be approved by the engineer)
Supplying and fixing approved quality Chromium Plated Soap Tray as directed
T-20 nr 1,416.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic Soap Tray as directed (Quality
T-21 nr 1,296.00
should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality Chromium Plated Tooth Brush Holder as
T-22 nr 1,427.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic Tooth Brush Holder as directed
T-23 nr 1,760.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-24 nr 2,578.00
Rose as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-24B nr 11,274.00
Rose and bar (English) as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-25 Rose and bar with conceal valve (Normal) as directed (Quality should be nr 4,576.00
approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-25B Rose and bar with conceal valve (English) as directed (Quality should be nr 14,910.00
approved by the engineer)
Supplying and fixing approved quality PVC 100 mm dia. Shower Rose as
T-26 nr 697.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated Toilet Paper Holdr
T-27B nr 3,911.00
(English) as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 600mm Towel Rail as
T-29 nr 3,660.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic 600mm Towel Rail as directed
T-30 nr 3,237.00
(Quality should be approved by the engineer)
U - ROOF PLUMBER
Supplying and fixing approved quality 150x100 mm PVC square type eave
U-01 m 871.00
gutters with brackets at 300mm centers, running heads, end caps, etc as directed
Supplying and fixing approved quality 87.5 mm dia. PVC down pipes with PVC
U-02 m 575.00
clips at 1000mm centers and all specials as directed
Supplying and fixing approve quality 200mmx200x87.5mm PVC gutter box with
U-03 nr 1,343.00
all specials as directed
Supplying and fixing 0.47 mm thick Zink Aluminum rainwater eave gutters of
U-04 girth 450~700mm as directed. Rate shall include lap lengths, gutter brackets, m 1,428.00
endplates, expansion joints, etc
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 100x100mm Zink Aluminum colour coated down pipes as
U-05 m 1,178.00
directed. Rate shall include all necessary nozzles, offsets, bends, clips,etc
Supplying and fixing 150x150mm Zink Aluminum colour coated down pipes as
U-06 m 1,590.00
directed. Rate shall include all necessary nozzles, offsets, bends, clips,etc
Supplying and fixing 300x300mm gutter boxes in Zink Aluminum colour coated
U-07 nr 1,234.00
metal sheets including necessary fittings
Supplying and fixing 0.47 mm thick & 225 mm wide colour coated Zink
Aluminum metal sheets on valance boards , barge boards or fascia. (Quality
U-08 and colour should be approved by the engineer) rate to include 200mm - 225 mm m 873.00
long bracket fixed to roof of 25mmx5mm section flat iron, painting with two coats
of anti corrosive paint etc.
V - TINKER
Supplying and fixing 0.47mm Zn/Al sheet 450mm wide flashing fixed with
V-01 150mm turned up along and top edge tucked well into wall in cement and lime m 1,532.00
mortar as directed
Valley gutters using 0.47mm Zn/Al sheet 900mm wide GI sheets by laying on
V-02 25mm thick class I timber boards and 25x25x4mm angle iron(both side), sheet m 8,147.00
tarred, joints soldered and cement lime filleting complete as directed
W - DRAIN LAYER
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying approved quality110mm (4") PVC PNT7 pipes on 150mm
W-05 thick 1:3:6(25m) concrete layer and covered with 1:3:6(25m) concrete with m 3,838.00
50mm minimum cover including excavation and backfilling
Supplying and laying approved quality110mm (4") PNT7 perforated PVC pipes on
W-06 300mm thick sand layer and covered with sand with 150mm minimum cover m 2,767.00
including excavation and backfilling
Supplying and fixing 37mm (1 1/2") dia. 1.5mm thick 2100mm high G.I vent pipe
W-07 nr 3,445.00
with copper wire dome.
W-08 Supplying and fixing approved quality drainage gully and grate PVC nr 1,348.00
Supplying and fixing approved quality drainage gully and grate Chromium
W-08B nr 1,723.00
platted
W-09 Supplying and fixing approved quality 40mm 4-way PVC floor trap nr 1,378.00
Replacing 100mm thick Cover Slab for 900 x 900mm Manhole in 1:2:4(20mm)
W-10 concrete reinforced with Y10@ 150mm c/c both ways. Rate shall include nr 4,720.00
reinforcement and necessary formwork.
Replacing 100mm thick Cover Slab for 750 x 750mm Manhole in 1:2:4(20mm)
W-11 concrete reinforced with Y10@ 150mm c/c both ways. Rate shall include nr 3,740.00
reinforcement and necessary formwork.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Applying one coat of approved quality wall primer and two coats of approved
quality emulsion paint to old walls with minor damages after patching up
X-03 m² 700.00
cracks , applying wall putty and sand papering, applying plaster of Paris and
preparing surface as directed
Applying two coats of approved quality emulsion paint to old walls with minor
X-04 damages after patching up cracks , applying lime putty and sand papering, m² 604.00
applying plaster of Paris and preparing surface as directed
Applying one coat of approved quality emulsion paint to old work without wall
X-05 m² 221.00
preparation
Applying one coat of approved quality weather shield paint to old work without
X-06 m² 358.00
wall preparation
Applying one coat of approved quality wall primer and two coats of approved
quality emulsion paint to old walls with major damages after patching up
X-07 m² 783.00
cracks, applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality emulsion paint to old walls with major
X-08 damages after patching up cracks, applying lime putty and sand papering, m² 692.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-09 m² 577.00
quality emulsion paint to new walls.
Applying one coat of approved quality wall primer and two coats of approved
quality weather shield paint to old walls with minor damages after patching up
X-10 m² 701.00
cracks , applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality weather shield paint to old walls with
X-11 minor damages after patching up cracks , applying lime putty and sand papering, m² 611.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
quality weather shield paint to old walls with major damages after patching up
X-12 m² 810.00
cracks, applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality weather shield paint to old walls with
X-13 major damages after patching up cracks, applying lime putty and sand papering, m² 720.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-14 m² 605.00
quality weather shield paint to new walls.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Applying one coat of approved quality wall primer and two coats of approved
quality enamel paint to old walls with minor damages after patching up cracks ,
X-15 m² 722.00
applying lime putty and sand papering, applying plaster of Paris and preparing
surface as directed.
Applying one two coats of approved quality enamel paint to old walls with
X-16 minor damages after patching up cracks , applying lime putty and sand papering, m² 631.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
quality enamel paint to old walls with major damages after patching up cracks,
X-17 m² 831.00
applying lime putty and sand papering, applying plaster of Paris and preparing
surface as directed.
Applying two coats of approved quality enamel paint to old walls with major
X-18 damages after patching up cracks, applying lime putty and sand papering, m² 740.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-19 quality enamel paint to new walls after applying lime putty and sand papering, m² 674.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-20 m² 714.00
quality enamel paint to old wood work after preparing surface as directed.
Applying two coats of approved quality enamel paint to old wood work after
X-21 m² 583.00
preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-22 m² 756.00
quality enamel paint to new wood work after preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-23 quality polyurethane varnish to old wood work after preparing surface as m² 693.00
directed.
Applying two coats of approved quality anti corrosive paint to steel work after
X-26 m² 432.00
preparing surface as directed.
Applying one coat of approved quality anti corrosive paint and two coats of
X-27 m² 606.00
approved quality enamel paint to steel work after preparing surface as directed.
Applying one coat of approved quality floor paint after preparing surface as
X-28 m² 250.00
directed.
Applying two coats of approved quality floor paint after preparing surface as
X-29 m² 409.00
directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Applying one coat of approved quality floor polish to floor and smoothing using a
X-30 m² 237.00
polisher after preparing surface as directed.
Applying two coats of approved quality emulsion paint to old ceiling with sand
X-31 m² 650.00
papering, applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer to walls, applying lime putty
X-32 m² 119.00
and sand papering, applying plaster of Paris and preparing surface as directed
Applying two coats of approved quality Roofing paint to new Roof work after
X-33 m² 331.00
preparing surface as directed.
Applying one coat of roof primer & two coats of approved quality Roofing paint
X-33A m² 742.00
for old Roof work after preparing surface as directed.
Apply two coat of wall potty on internal rough plaster to get smooth finish (rate
X-34 m² 580.00
for the rough plaster shall be measured separately)
Y - ELECTRICAL INSTALLATION
Note: Length of 15 m wire has been included for each item. If exceed the
length, additional length shall be included separately
Supplying and fixing approved quality lamp point wired through a 5 Amp switch
using 2x1/1.13mm Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits
Y-01 with all specials. surface plastic casing can be use with approved condition by the Nr 3,660.00
engineer. Rate shall include switch, sun box, ceiling rose, round block, holder etc.
(Quality should be approved by the engineer) bulb will be paid seperately
Supplying and fixing approved quality Weather proofed lamp Fitting (Out
Door) with point wired through 5 Amp switch using 2x1/1.13mm Cu\PVC\PVC
(1sq.mm) wire and 7/0.67 mm Cu/PVC (2.5sq.mm) earth wires in fully concealed
Y-02 PVC conduits with all specials. surface plastic casing can be use with approved Nr 6,114.00
condition. Rate shall include switch, sun box, complete lamp fitting, etc (Quality
should be approved by the engineer) bulb will be paid seperately. Prime cost of
Fitting = R.s.1500-1750
Supplying and fixing approved quality Wall bracket lamp Fitting (In door) with
point wired through a 5 Amp switch using 2x1/1.13mm Cu\PVC\PVC (1sq.mm)
wires in fully concealed PVC conduits with all specials. surface plastic casing
Y-03 Nr 9,284.00
can be use with approved condition. Rate shall include switch, sun box, etc
(Quality should be approved by the engineer) bulb will be paid seperately.
Prime cost of Fitting = R.s.4000-4500
Supplying and fixing approved quality 6W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-04 surface plastic casing can be use with approved condition. Rate shall include Nr 4,164.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-05 surface plastic casing can be use with approved condition. Rate shall include Nr 4,528.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 12W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-06 surface plastic casing can be use with approved condition. Rate shall include Nr 4,650.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 15W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-07 surface plastic casing can be use with approved condition. Rate shall include Nr 4,891.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 18W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-08 surface plastic casing can be use with approved condition. Rate shall include Nr 5,012.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 24W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-09 surface plastic casing can be use with approved condition. Rate shall include Nr 6,285.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 1400mm sweep ceiling fan with fan
regulator & On/Off by 01 Gang Switch wired through 2x1/1.13mm Cu\PVC\PVC
(1sq.mm) wires and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully
concealed PVC conduits with all specials. surface plastic casing can be use
with approved condition. Ceiling fan Should be following Specification.Power
Consumption (60W-80W)
Y-10 SLS 814 Compliance Nr 15,652.00
02 Year company Warranty
Power cut-off Safety Switch
Safety Wired for Fan Motor from Rod
Hum free Condenser Type Controller
(Quality should be approved by the engineer)
Prime cost of Fan = R.s.8,500.00-9,000.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 300x300mm Exhaust fan with Square Pin
type - G /13 Amp socket outlet wired through 7/0.67mm Cu\PVC\PVC(T)-
2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully concealed
PVC conduits with all specials. surface plastic casing can be use with approved
condition.
Y-11 Exhaust fan Should be following Specification Nr 16,372.00
02 Year company Warranty
Front Side louver protection
Back Side Automatic Shutter
(Quality should be approved by the engineer)
Prime cost of Fan = R.s.8,000.00-9,000.00
Supplying and fixing approved quality Wall mounted fan with in-built regulator
and Square Pin type - G /13 Amp socket outlet wired through 7/0.67mm
Cu\PVC\PVC(T)-2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire
in fully concealed PVC conduits with all specials. surface plastic casing can be
use with approved condition.Power Consumption (50W-60W)
Wall-fan Should be following Specification
Y-12 Nr 19,717.00
02 Year company Warranty
Oscillation control
Metal Blade
3 Speed and on/Off pull switch
(Quality should be approved by the engineer)
Prime cost of Fan = R.s.12,500-14,000.00
Supplying and fixing approved quality 5 Amp socket outlet wired through
2x1/1.13mm Cu\PVC\PVC (1sq.mm) wires and 1x7/0.67mm Cu\PVC (2.5sq.mm)
Y-13 earth wire in fully concealed PVC conduits with all specials. surface plastic Nr Deleted
casing can be use with approved condition. (Quality should be approved by the
engineer)
Supplying and fixing approved quality Square Pin type - G /13 Amp socket
outlet wired through 7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm wire and
Y-14 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully concealed PVC conduits with Nr 5,002.00
all specials. surface plastic casing can be use with approved condition.
(Quality should be approved by the engineer)
Supplying and fixing approved quality Square Pin type - G/13 Amp socket
outlet (for the ring circuit or radial circuit) wired through 7/0.67mm
Cu\PVC\PVC(T) - 2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire
Y-14A Nr 970.00
in fully concealed PVC conduits with all specials. surface plastic casing can be
use with approved condition. supply cables & concealing materials will be paid
separately. (Quality should be approved by the engineer)
Supplying and fixing approved quality 15 Amp socket outlet wired through
7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm)
Y-15 earth wire in fully concealed PVC conduits or surface plastic casing and capping as Nr Deleted
directed. supply cables & concealing materials will be paid separately (Quality
should be approved by the engineer)
Supplying and fixing of approved quality 40 Amp single phase main switch
Y-16 Nr 1,949.00
(10kA B.C) to working order (Quality should be approved by the engineer)
Supplying and fixing of approved quality 60 Amp single phase main switch
Y-17 Nr 1,949.00
(10kA B.C) to working order (Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing of approved quality 12 way 4 Row Wall mounted Steel
Distribution Board to working Order. Enclosure box size not less than 350mm x
Y-24A 700mm x 125mm and material should be Alu Zinc coated metal sheet with Nr 17,745.00
poweder coated Texture (RAL7032) Surface finished. ICE 60529 (IP54) Standard
(Quality & Surface Type should be approved by the engineer)
Supplying and fixing of approved quality 6A,10A or 16A type"C"MCB (10kA B.C)
Y-25 Nr 824.00
(Quality should be approved by the engineer)
Supplying and fixing of approved quality 20A,25A or 32A type "C"MCB (10kA
Y-26 Nr 830.00
B.C)(Quality should be approved by the engineer)
Supplying and fixing approved quality 40 Amp/ 4 Pole three phase main switch
to working order (Quality should be approved by the engineer)
Y-27 Nr 3,600.00
Product Should Be Europian or Equalent.
Prime Cost of Product -2,000.00-2,200.00
Supplying and fixing approved quality 63 Amp/ 4 Pole three phase main switch
to working order (Quality should be approved by the engineer)
Y-28 Nr 3,678.00
Product Should Be Europian or Equalent.
Prime Cost of Product -2,000.00-2,500.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 40 Amp/30mA three phase RCCB (Trip
Y-29 switch) to working order (Quality should be approved by the engineer) Nr 7,096.00
Prime Cost of Product -4,500.00-5,000.00
Supplying and fixing approved quality 63Amp/30mA three phase RCCB (Trip
Y-30 switch) to working order (Quality should be approved by the engineer) Nr 7,659.00
Prime Cost of Product -5,000.00-5,500.00
Supplying and fixing approved quality Electrical Bell wired through a 5Amp Bell
switch using 2x1/1.13mm cu\pvc\pvc(1sq.mm) wires in fully concealed pvc
Y-31 Nr 3,776.00
conduits or surface plastic casing and capping as directed. Rate shall include
switch,sun box,Bell,etc. (Quality should be approved by the engineer)
Supplying and fixing 1800mm long 50mm dia. (1.8 mm) GI earth pipe covered
by pits (internal size 450x450) depth up to 600mm with 75mm thick base in
1:3:6(25) con. 115mm Tk. Brick walls and rendering in 1:3 ct. sand mix including
Y-32 Nr 6,883.00
forming channel and 50mm tk. removable con. cover in 1:2:4(20) con. reinfoced
with R6@75mm c/c both way and plastered all exposed surfaces with 1:3 ct. sand
mix as per drawing (Must be set to at least 10 ohms Resistance)
Supplying and fixing 1800mm long 50mm dia. (1.8 mm) GI earth pipe as
Y-32A Nr 3,443.00
directed (only for repair works) Must be set to at least 10 ohms Resistance
Supplying and fixing 50x50x5.8 mm Angle Iron as directed and applying two
Y-33 m 2,895.00
coats of anti corrosive paint.
Supplying and fixing approved quality 7/1.04 Cu\PVC\PVC (T) - 6 sq.mm main
Y-34 m 578.00
wire as directed (concealing materials will be paid separately)
Supplying and fixing approved quality 7/0.85mm Cu\PVC (4 sq.mm) earth wire
Y-36A m 454.00
as directed (concealing materials will be paid separately)
Supplying and fixing approved quality 3/4"(20mm) PVC Conduite pipe with all
Y-39 m 131.00
specials. Rate shall include clips nails etc. ( only the additional cost)
Supplying and fixing approved quality 1"(25mm) PVC Conduite pipe with all
Y-40 m 153.00
specials. Rate shall include clips nails etc. ( only the additional cost)
Supplying and fixing approved quality 1 1/2"(40mm) PVC Conduite pipe with all
Y-40A m 292.00
specials. Rate shall include clips nails etc. ( only the additional cost)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 1"(25mm x 16mm) PVC casing with
Y-41 m 156.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 1 1/2"(40mm x 16mm) PVC casing with
Y-42 m 236.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 2" x 1" (50mm x 25mm) PVC casing with
Y-43 m 302.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 2" x 2" (50mm x 50mm) PVC casing with
Y-43A m 493.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 4" x 2" (100mm x 50mm) PVC casing
Y-44 m 825.00
with capping as directed. Rate shall include clips nails etc.(only the additional cost)
Supplying and fixing approved quality 7W CFL Bulb (B22/E27) for the completed
Y-45 Nr 538.00
wiring point. Bulb should fulfill following specification & approved by engineer.
Supplying and fixing approved quality 10W CFL Bulb (B22/E27) for the
Y-46 completed wiring point. Bulb should fulfill following specification & approved by Nr 538.00
engineer.
Supplying and fixing approved quality 14W CFL Bulb (B22/E27) for the
Y-47 completed wiring point. Bulb should fulfill following specification & approved by Nr 538.00
engineer.
Supplying and fixing approved quality18W CFL Bulb (B22/E27) for the
Y-48 completed wiring point. Bulb should fulfill following specification & approved by Nr 666.00
engineer.
Supplying and fixing approved quality 3W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-49 Nr 395.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 5W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-50 Nr 516.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 7W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-51 Nr 638.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-52 Nr 759.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 12W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-53 Nr 941.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 1 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-54 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 457.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 2 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-55 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 578.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 3 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-56 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 699.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative Universal Socket outlet
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-57 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 632.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality Special decorative 1 Gang Two Way
Switch for the wiring point fulfill with specification. Switch should be big size
dolly with removeble frame. It should be made of Hihgly impact by polycarbonate
Y-58 with various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm Nr 1,392.00
x 86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 13A Socket outlet for
the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-59 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 1,242.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 15A Socket outlet for
the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-60 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x Nr 1,271.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Z - MISCELLANEOUS WORK
Supplying and fixing approved quality PVC coated gauge 10 chain link fence as
Z-01 directed. Rate shall include necessary tension wires. Fence posts and horizontal m² 1,506.00
bars will be paid separately
Z-02 Supplying and fixing 2" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 1,384.00
Z-03 Supplying and fixing 2" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 1,454.00
Z-04 Supplying and fixing 2" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 766.00
Z-05 Supplying and fixing 1½" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 1,099.00
Supplying and fixing 1½" diameter G. I. Pipes (1.8mm thick: +/- 10%: ) as
Z-06 m 1,152.00
directed
Z-07 Supplying and fixing 1½" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 663.00
Z-08 Supplying and fixing 1¼" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 1,032.00
Z-09 Supplying and fixing 1¼" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 610.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Z-10 Supplying and fixing 1¼" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 579.00
Z-11 Supplying and fixing 1" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 733.00
Z-12 Supplying and fixing 1" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 765.00
Z-13 Supplying and fixing 1" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 501.00
Supplying and fixing approved quality barbed wires ( double strand, 12 S.W.G.
Z-14 with 4 points at 75mm centers) with necessary hooks and washers as directed m 75.00
(Quality should be approved by the engineer)
Supplying and fixing 1.80m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-15 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,723.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 1.95m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-16 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,754.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 2.10m high ( top 87.5x87.5mm and bottom 137.5x137.5mm)
Z-17 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,953.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 2.40m high ( top 87.5x87.5mm and bottom 150x150mm)
Z-18 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 2,480.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 3.15m high ( top 75x75mm and bottom 150x150mm)
concrete fence posts including 0.45m bend in 1:2:4(20mm) concrete reinforced
Z-19 nr 4,057.00
with 4R6 and R6 stirrups @ 150mm c/c. (Quality should be approved by the
engineer)
Supplying and fixing 1.80m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-20 concrete support posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 3,571.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Fabricating & fixing tag board, 12mm thick regidform placed on 12mm thick MDF
board and cover with approved colour velvet cloth by engineer .The board should
Z-21 be covered with 25x25mm natural anodized aluminum angle using brass screws m² 4,243.00
.Rate should be included two coat of enamel paint on both side and arrangement
for hang
Volume II
BADULLA
SCHEDULE OF RATES FOR
BUILDING WORKS
Volume II
This volume of schedule rate for building works shall be used for the contracts which get done from
Approved Societies in Divisional Secretariat office of relevant area, School Development Societies
and Direct Labours.
BADULLA
DEPARTMENT OF BUILDINGS - UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - 2019 (Without VAT)
CONTENTS
A Demolisher 97 - 98
B Excavator 98 - 99
E Reinforcement 103
Q Glazier 131
V Tinker 139
Volume II
BASIC RATES
(LABOUR, MATERIAL & MACHINERY)
BADULLA
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
LABOUR
101 Skilled Labour day 1,900.00 1,900.00
102 Semiskilled Labour day 1,500.00 1,500.00
103 Unskilled Labour day 1,400.00 1,400.00
104 Mason day 2,050.00 2,050.00
105 Carpenter day 2,050.00 2,050.00
106 Plumber day 2,050.00 2,050.00
107 Painter day 2,050.00 2,050.00
108 Welder day 2,150.00 2,150.00
109 Bar Bender day 2,050.00 2,050.00
110 Alluminium Worker day 2,150.00 2,150.00
111 Work Supervisor day 1,525.00 1,525.00
112 Electrician day 2,050.00 2,050.00
MACHINES (With fuel)
201 Concrete Mixer (400lts) day 4,500.00 4,500.00
202 Porker vibrator with Operator day 3,000.00 3,000.00
203 Vibrating roller (one ton) day 4,000.00 4,000.00
204 Tractor (1 Cube) with Tailer day 6,000.00 6,000.00
205 Excavator mobile DC 120 Hour 5,000.00 5,000.00
day(8
206 Ten wheeler (km 100) 15,000.00 15,000.00
hrs)
day(8
207 Lorry/ Tipper/1cube 8,000.00 8,000.00
hrs)
day(8
208 Lorry/ Tipper/2cube 10,000.00 10,000.00
hrs)
day(8
209 Chain saw (with operator) 6,000.00 6,000.00
hrs)
210 Bachoe loader (HP 92) Hour 2,500.00 2,500.00
211 Air Compressor 250CFM Hour 2,000.00 2,000.00
Welding plant with Diesel Generator (including
212 day 6,000.00 6,000.00
operator)
213 Welding plant(Electrical) day 750.00 750.00
214 Tractor Water Bowser - 2800l day 5,750.00 5,750.00
215 Lorry Water Bowser - 6000l day 6,200.00 6,200.00
MATERIALS
Earth Work
301 Baskets Nr 200.00 200.00
302 Gravel m³ 700.00 700.00
303 Earth m³ 402.50 402.50
304 Blasting powder kg 565.00 5.65 570.65
305 Safety fuse m 37.00 0.37 37.37
306 Detonators (normal) 9m Nr 112.00 1.12 113.12
307 Quarry dust m³ 1,400.00 1,400.00
308 Aggregate Base course (ABC) m³ 2,000.00 2,000.00
Concrete Work
401 Sand m³ 3,100.00 3,100.00
402 Cement bag 951.00 951.00
403 Metal 50mm m³ 2,300.00 2,300.00
404 Metal 38mm m³ 2,300.00 2,300.00
405 Metal 25mm m³ 2,650.00 2,650.00
406 Metal 20mm m³ 2,750.00 2,750.00
407 Metal 12.5mm m³ 2,750.00 2,750.00
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
Formwork
501 Shuttering planks - 25mm thick m² 530.00 5.30 535.30
502 Plywood sheets - 18mm thick m² 1,345.00 13.45 1,358.45
503 Round timber 3m (4' - 6' Ǿ) Nr 263.00 2.63 265.63
504 Bamboo 3m Nr 215.00 2.15 217.15
505 100mmx50mm class II timber m 252.00 2.52 254.52
506 50mmx50mm class II timber m 135.00 1.35 136.35
507 Nail kg 172.00 1.72 173.72
508 Mould oil l 94.00 0.94 94.94
509 10mm dia. 450mm bolts Nr 92.00 0.92 92.92
510 Plywood sheets - 15mm thick m² 1,052.00 10.52 1,062.52
Reinforcement
601 Steel MS - 6mm kg 137.00 1.37 138.37
602 Steel MS - >6mm kg 139.00 1.39 140.39
603 Steel TS kg 139.00 1.39 140.39
604 Binding wire kg 142.00 1.42 143.42
605 Welding rods kg 230.00 230.00
Brick / Cement Block Work
701 Bricks 220x105x65mm Nr 13.60 13.60
702 Wire cut bricks Nr 30.00 30.00
703 Batik bricks Nr 31.00 31.00
704 Bricks 220x105x100mm Nr 16.00 16.00
705 Bricks 220x150x100mm Nr 17.00 17.00
25 N/mm² interlocking blocks
707 Nr 31.60 0.32 31.92
(220mmx110mmx80mm)
40N/mm² interlocking blocks
708 Nr 38.70 0.39 39.09
(220mmx110mmx80mm)
709 Solid cement block ( 390mm x 150mm x 190mm) Nr 93.00 0.93 93.93
710 Solid cement block ( 390mm x 100mm x 190mm) Nr 62.00 0.62 62.62
711 Hollow cement block( 390mm x 150mm x 190mm) Nr 75.50 0.76 76.26
712 Hollow cement block( 390mm x 200mm x 190mm) Nr 84.60 0.85 85.45
Masonry
801 150x225mm Rubble m³ 1,200.00 1,200.00
802 DPC Tar l 54.80 0.55 55.35
Pavior
Antitermite treatment - Sub contractors rate
901 m² 230.00 230.00
(Lankem) 10 Year warranty
902 Water proofing - Sub contractors rate 5 Year warranty m² 1,087.00 1,087.00
903 Gauge 1000 polythene m² 91.30 0.91 92.22
904 Crystaline waterproofing material kg 280.50 280.50
Tiller
1001 100x100 glazed wall tiles Nr Deleted Deleted
1002 150x150 glazed wall tiles Nr Deleted Deleted
1003 200x300 glazed wall tiles Nr Deleted Deleted
1003B 200x400 glazed wall tiles Nr Deleted Deleted
1004 300x400 glazed wall tiles Nr 230.00 2.30 232.30
1004B 300x600 glazed wall tiles Nr 434.80 4.35 439.15
1006 300x300 non skid floor tiles Nr 151.75 1.52 153.27
1007 450x450 non skid floor tiles Nr 400.00 4.00 404.00
1009 300x300 non skid floor tiles - Homogeneous Nr 199.00 1.99 200.99
300x300 non skid floor tiles - Homogeneous (Semi
1010 Nr 200.00 2.00 202.00
Glazed/Matt)
1011 300x300 floor tiles - Glazed Nr 129.00 1.29 130.29
1012 300x300 floor tiles - Matt Nr 142.00 1.42 143.42
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1013 400x400 non skid floor tiles - Homogeneous Nr 370.00 3.70 373.70
400x400 non skid floor tiles - Homogeneous (Semi
1014 Nr 357.00 3.57 360.57
Glazed/Matt)
1015 400x400 floor tiles - Glazed Nr 251.00 2.51 253.51
1016 400x400 floor tiles - Matt Nr 280.00 2.80 282.80
1017 450x450 floor tiles - Matt Nr 409.00 4.09 413.09
1018 600x600 floor tiles - Matt Nr 1,101.00 11.01 1,112.01
1019 600x600 floor tiles - Polished Nr 1,391.00 13.91 1,404.91
1020 600x400 floor tiles - Matt Nr 606.00 6.06 612.06
1021 600x300 floor tiles - Homogeneous Nr 631.00 6.31 637.31
1022 600x300 floor tiles - Glazed (polished) Nr 605.00 6.05 611.05
1023 600x600 Polished - Homogeneous Nr 1,202.00 12.02 1,214.02
1024 800x800 Polish Porcelain tile - Chinese Nr 2,146.00 21.46 2,167.46
1025 PVC tile beading m 61.00 61.00
1026 Stainless steel tile beading m 122.00 122.00
1027 100mm high Timber Skirting m 208.00 2.08 210.08
1028 600x600 - Homogeneous Nr 1,070.00 10.70 1,080.70
1030 600x300 semi Glazed Nr 524.00 5.24 529.24
1031 900x450 Matt Nr 1,243.00 12.43 1,255.43
1032 900x450 polished Nr 1,574.00 15.74 1,589.74
1033 500x500 glazed Nr 661.00 6.61 667.61
1034 500x500 Matt Nr 667.00 6.67 673.67
1035 500x500 Polished Nr 801.00 8.01 809.01
Roofer
1101 Special class timber (microcorys) m³ 126,520.00 1,265.20 127,785.20
1102 50mmx25mm special class timber m 69.00 0.69 69.69
1103 50mmx50mm special class timber m 219.50 2.20 221.70
1104 100mmx50mm special class timber m 630.00 6.30 636.30
1105 100mmx75mm special class timber m 963.00 9.63 972.63
1106 125mmx50mm special class timber m 799.00 7.99 806.99
1107 125mmx75mm special class timber m 1,214.00 12.14 1,226.14
1108 150mmx50mm special class timber m 968.00 9.68 977.68
1109 150mmx75mm special class timber m 1,509.00 15.09 1,524.09
1110 Asbestos sheet m² 617.00 6.17 623.17
1111 Roofing screws 112mm& washer Nr 20.00 20.00
1112 Wood preservative l 249.00 2.49 251.49
1113 J bolt and nut 300mm Nr 17.00 17.00
1114 12mm bolt and nut (Grade M8.8 ) Nr 33.00 33.00
1115 50x50x5.8mm angle irons (S275) m 486.00 4.86 490.86
1116 62.5x62.5x5.8mm angle irons (S275) m 774.00 7.74 781.74
1117 75x75x5.8mm angle irons (S275) m 1,043.00 10.43 1,053.43
1118 6'-0" asbestos sheets Nr 1,154.00 11.54 1,165.54
1119 8'-0" asbestos sheets Nr 1,657.00 16.57 1,673.57
1120 10'-0" asbestos sheets Nr 1,803.00 18.03 1,821.03
1121 12'-0" asbestos sheets Nr 2,232.00 22.32 2,254.32
1122 100x50x12 "C" channels 2mm thick m 721.00 7.21 728.21
1122A 75x38x12 "C" channels 2mm thick m 647.00 6.47 653.47
1122B 150x65x12 "C" channels 2mm thick m 1,403.00 14.03 1,417.03
1123 0.47mm tk. Zn-alum metal roofing sheets m² 913.00 9.13 922.13
1124 Fasteners Nr 17.50 0.18 17.68
1125 Roof tiles Nr 87.00 0.87 87.87
1126 Ridge tiles Nr 73.00 0.73 73.73
1127 5mm thick gusset plate m² 6,438.75 64.39 6,503.14
1128 Zink Alluminium ridge capping of girth 470mm m 361.00 3.61 364.61
1129 Asbestos ridges "V" shape Nr 429.00 4.29 433.29
1129A Asbestos ridges pair 1,056.00 10.56 1,066.56
BSR (Vol-11) page 82
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1130 Lime kg 21.50 0.22 21.72
Double side 3 - 4 mm thickness Aluminium foil as
1131A m² 154.50 1.55 156.05
heat insulation
1132 3"x 3" (Gauge 17) Mesh m² 112.00 1.12 113.12
1133 10 mm gusset plate m² 6,574.00 65.74 6,639.74
1134 Truss plate, base plate (10 mm thick) m² 7,235.00 72.35 7,307.35
1135 Class I timber m³ 65,808.00 658.08 66,466.08
1136 50mmx25mm class I timber 4.m &below m 47.00 0.47 47.47
1137 50mmx50mm class I timber m 150.00 1.50 151.50
1138 100mmx50mm class I timber m 375.00 3.75 378.75
1139 100mmx75mm class I timber m 481.00 4.81 485.81
1140 125mmx50mm class I timber m 400.00 4.00 404.00
1141 125mmx75mm class I timber m 606.00 6.06 612.06
1142 150mmx50mm class I timber m 481.00 4.81 485.81
1143 150mmx75mm class I timber m 752.00 7.52 759.52
1144 Imported treated timber m³ 109,144.00 1,091.44 110,235.44
1145 0.30mm thick sandwich panel sheet m² Deleted Deleted
1146 Gable cap m Deleted Deleted
1147 10 x75mm Bolt and nut Kg 493.00 4.93 497.93
1148 Catloy paste Kg 687.00 6.87 693.87
1149 ASA Roofing sheets m² 1,322.00 13.22 1,335.22
1150 Self tapping Screw with water proof cap nr 34.00 0.34 34.34
1151 Top Ridge m 713.00 7.13 720.13
1152 End of Ridge nr 261.00 2.61 263.61
1153 Hip Ridge nr 574.00 5.74 579.74
1154 Three way ridge nr 652.00 6.52 658.52
1155 Wall flashing board m 510.00 5.10 515.10
1156 50mmx50mm Imported treated timber m 230.00 2.30 232.30
1157 100mmx50mm Imported treated timber m 623.00 6.23 629.23
1158 100mmx75mm Imported treated timber m 951.00 9.51 960.51
1159 125mmx50mm Imported treated timber m 886.00 8.86 894.86
1160 125mmx75mm Imported treated timber m 1,246.00 12.46 1,258.46
1161 150mmx50mm Imported treated timber m 935.00 9.35 944.35
1162 150mmx75mm Imported treated timber m 1,640.00 16.40 1,656.40
1163 150mmx100mm Imported treated timber m 2,542.00 25.42 2,567.42
Carpenter and Joiner
1201 31mm planks special class m² 2,970.00 29.70 2,999.70
1202 25mm planks special class m² 2,377.00 23.77 2,400.77
1203 20mm planks special class m² 2,040.00 20.40 2,060.40
1204 20mm thick lunumidella timber m² 739.00 7.39 746.39
1205 50mm iron screws Nr 4.00 0.04 4.04
1206 G.I. clout nails 20mm kg 435.00 4.35 439.35
1207 Asbestos Ceiling sheets m² 343.00 3.43 346.43
1208 Beadings m 47.00 0.47 47.47
1209 Moldings m 65.00 0.65 65.65
1210 Screws 38mm Nr 3.00 0.03 3.03
1211 Wooden plugs Nr 4.00 0.04 4.04
1212 Primer (For Celing) l 940.00 9.40 949.40
1213 Emulsion paint (For Celing) l 783.00 7.83 790.83
1214 100x75 door/ window frame special class m³ 125,893.00 1,258.93 127,151.93
1215 38mm brass screws Nr 19.00 0.19 19.19
1216 25mm brass screws Nr 14.00 0.14 14.14
1217 Rawl plugs and screws Nr 5.00 0.05 5.05
1218 100x50mm brass hinges pair 737.00 7.37 744.37
1219 12x12mm fillets m 5.00 0.05 5.05
1220 300mm skeleton bolts Nr 258.00 2.58 260.58
BSR (Vol-11) page 83
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1221 38x38mm sash bars m 41.00 0.41 41.41
1222 150mm barrel bolts Nr 340.00 3.40 343.40
1223 Plywood door sash (2.11 m²) Nr 4,119.00 41.19 4,160.19
1224 Holdfasts Nr 17.00 0.17 17.17
1225 PVC door with frame (80.4 x 206 cm) Nr 5,636.00 56.36 5,692.36
1226 3mm glass plain m² 601.00 6.01 607.01
1227 Casement stays 250mm ( heavy duty brass) Nr 335.00 3.35 338.35
1228 Casement fasteners (brass) Nr 193.00 1.93 194.93
1229 Class 11 Ginisapu planks 25mm thick m² 1,024.00 10.24 1,034.24
1230 25mm Brass screw Nr 7.00 0.07 7.07
1231 Lunumidella timber m² 1,034.00 10.34 1,044.34
1232 12 mm thick plywood sheet m² 773.00 7.73 780.73
1233 G.I. clout nails 38mm Kg 434.00 4.34 438.34
1234 31mm planks class 1 m² 2,266.00 22.66 2,288.66
1235 Window ring (Brass) Nr 137.00 1.37 138.37
1236 38mm Copper screws Nr 2.00 0.02 2.02
1237 25mm Copper screws Nr 1.00 0.01 1.01
1238 Casement stays 250mm ( heavy duty) Copper Nr 300.00 3.00 303.00
1239 Casement fasteners (Copper) Nr 180.00 1.80 181.80
1240 38mm oxidized brass screws Nr 14.40 0.14 14.54
1241 25mm oxidized brass screws Nr 10.40 0.10 10.50
1242 10ft P V C ceiling sheet (8") m² 1,572.00 15.72 1,587.72
1243 Moldings m 104.40 1.04 105.44
1244 25mm x 35 mm GI Channel m 57.00 0.57 57.57
1245 Flat head screws 3/4 x 6 Nr 2.60 0.03 2.63
1246 Concrete Nails 25mm Nr 0.90 0.01 0.91
1247 Reverts 5/32 x 1/2 Nr 1.50 0.02 1.52
1248 Self tapping Screw (1/2") Nr 1.50 0.02 1.52
1249 Top Corner bar m 90.00 0.90 90.90
1250 L Corner bar m 94.00 0.94 94.94
1251 H Corner bar m 90.00 0.90 90.90
Brass Founder
1301 Night latch lock (Grade II) Nr 804.50 8.05 812.55
1301a Night latch lock (Grade I) Nr 1,030.50 10.31 1,040.81
1302 Mortise Union or equivalent (English) single lock Nr 3,165.00 31.65 3,196.65
1303 Mortise Union or equivalent (English) double lock Nr 5,108.50 51.09 5,159.59
1304 Robin ITALY or equivalent made brass lock Nr 6,870.00 68.70 6,938.70
1305 Fuda or equivalent lock Nr 922.00 9.22 931.22
1306 50mm barrel bolt (Brass) Nr 243.00 2.43 245.43
1307 100x100mm butt hinges (Oxidized brass) Nr 408.00 4.08 412.08
1308 150x100mm butt hinges (Oxidized brass) Nr 579.50 5.80 585.30
1309 100mm barrel bolt (Brass) Nr 275.00 2.75 277.75
1310 150mm barrel bolt (Brass) Nr 472.50 4.73 477.23
1311 100x100mm butt hinges (Brass) Nr 494.00 4.94 498.94
1312 150x100mm butt hinges (Brass) Nr 622.50 6.23 628.73
1313 50mm barrel bolt (Copper) Nr 232.00 2.32 234.32
1313A 50mm barrel bolt stainless steel Nr 300.50 3.01 303.51
1314 100x100mm butt hinges (Copper) Nr 408.00 4.08 412.08
1315 150x100mm butt hinges (Copper) Nr 494.00 4.94 498.94
1316 100mm barrel bolt (Copper) Nr 279.50 2.80 282.30
1317 150mm barrel bolt (Copper) Nr 391.50 3.92 395.42
1318 Casement fasteners (Oxidized brass) Nr 249.00 2.49 251.49
1319 Casement stays 250mm ( Heavy Duty Oxidized Brass) Nr 249.00 2.49 251.49
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
Iron Monger
1401 50x50 G.I. welded mesh 10GB m² 687.00 6.87 693.87
1402 50x12mm beadings (not used for rate analysis) m 583.00 5.83 588.83
1403 6mm MS rods kg 139.50 1.40 140.90
1404 12x5mm flat iron m 124.50 1.25 125.75
1405 25x25x5(+/-1mm )mm angle iron m 209.00 2.09 211.09
1406 100mm safety type Hasp and Staple Nr 170.00 1.70 171.70
1407 150mm safety type Hasp and Staple Nr 174.00 1.74 175.74
1408 100x100mm butt hinges (Oxidized iron) Nr 311.00 3.11 314.11
1409 150x100mm butt hinges (Oxidized iron) Nr 404.50 4.05 408.55
1410 37x37x5.8 mm angle iron m 413.50 4.14 417.64
1411 25x25x5 mm angle iron m 297.50 2.98 300.48
1412 25x5mm flat iron m 261.00 2.61 263.61
1412A 38 x 5mm flat iron m 209.00 2.09 211.09
1413 6mm mild steel hook Nr 65.50 0.66 66.16
1414 25 x 25 x1.2mm Box bar m 134.50 1.35 135.85
1415 25 x 25 x 1.4mm Box bar m 173.50 1.74 175.24
1416 37 x 25 x1.6mm Box bar m 176.50 1.77 178.27
1417 50 x 25 x 1.2mm Box bar m 220.00 2.20 222.20
1418 50 x 25 x 1.4mm Box bar m 264.50 2.65 267.15
1419 50 x 25 x 1.6mm Box bar m 300.50 3.01 303.51
1420 50 x 25 x 2mm Box bar m 358.50 3.59 362.09
1421 37 x 37 x 2mm Box bar m 375.50 3.76 379.26
1422 50 x 50 x 2 mm Box bar m 497.50 4.98 502.48
1423 75 x 37 x 2mm Box bar m 604.00 6.04 610.04
225mm long SS barrel bolt with safety type Hasp and
1424 Nr 1,174.00 11.74 1,185.74
Staple
1425 50mm pad lock Nr 696.00 6.96 702.96
Aluminium Extrusions (Natural Anodized)
1501 70S-1101-1 (NA) m 731.50 7.32 738.82
1502 70S-1001-1 (NA) m 748.50 7.49 755.99
1503 70S-1201-1 (NA) m 609.00 6.09 615.09
1504 70S-1601 (NA) m 593.00 5.93 598.93
1505 70S-1701 (NA) m 525.50 5.26 530.76
1506 70S-1501(NA) m 672.00 6.72 678.72
1507 70S-1401 (NA) m 514.00 5.14 519.14
1508 70SFL-103 (NA) m 1,198.50 11.99 1,210.49
1509 70SFL-102 (NA) m 455.00 4.55 459.55
1510 GL-107 (NA) m 223.00 2.23 225.23
1511 DG-02 (NA) m 372.50 3.73 376.23
1512 DG-102 (NA) m 333.00 3.33 336.33
1513 CA-1011(NA) m 812.00 8.12 820.12
1514 CA-1012 (NA) m 1,250.00 12.50 1,262.50
1515 100D-1914 (NA) m 191.50 1.92 193.42
1516 CA-1007 (NA) m 414.50 4.15 418.65
1517 CA-1008 (NA) m 728.50 7.29 735.79
1518 CA-2005 (NA) m 750.50 7.51 758.01
1519 A-111 m 714.50 7.15 721.65
1520 DG-103 (NA) m 254.50 2.55 257.05
1521 DG-101(NA) m 307.00 3.07 310.07
1522 CA-2004 (NA) m 579.00 5.79 584.79
1523 GL-107 (NA) m 223.00 2.23 225.23
1524 CA-1003 (NA) m Deleted Deleted
1525 CA-1004 (NA) m Deleted Deleted
1526 CA-2006 (NA) m Deleted Deleted
1527 DG-04(NA) m 310.50 3.11 313.61
BSR (Vol-11) page 85
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1528 DG-102(NA) m 333.00 3.33 336.33
1529 CA-1001 (NA) m Deleted Deleted
1530 CA-1002 (NA) m Deleted Deleted
1531 100D-3105 (NA) m 1,328.50 13.29 1,341.79
1532 100D-101 (NA) m 1,336.50 13.37 1,349.87
1533 100D-103 (NA) m 1,399.00 13.99 1,412.99
1534 100D-201 (NA) m 1,289.00 12.89 1,301.89
1535 100D-301 (NA) m 1,536.50 15.37 1,551.87
1536 100D-401 (NA) m 1,702.00 17.02 1,719.02
1537 100D-501 (NA) m 182.50 1.83 184.33
1538 70D-1910 (NA) m 192.50 1.93 194.43
1539 100D-3503A (NA) m 969.00 9.69 978.69
1540 100D-3004 (NA) m 1,115.50 11.16 1,126.66
1541 100D-3207 (NA) m Deleted Deleted
1542 100D-3503 (NA) m 1,049.00 10.49 1,059.49
1543 100D-1914 (NA) m 191.50 1.92 193.42
1544 100D-3203 (NA) m Deleted Deleted
1545 70S-1002-1(NA) m 524.50 5.25 529.75
1546 70S-1102-1 (NA) m 375.50 3.76 379.26
1547 70S-1202-1(NA) m 385.00 3.85 388.85
1548 70S-1701A (NA) m 689.50 6.90 696.40
1549 70S-1402-1 (NA) m 486.50 4.87 491.37
1550 70S-1801 (NA) m 464.50 4.65 469.15
1551 70S-1101-2 (NA) m Deleted Deleted
1552 70S-1001-1 (NA) m 749.00 7.49 756.49
1553 70S-1704 (NA) m Deleted Deleted
1554 70S-1402-1 (NA) m 486.50 4.87 491.37
1555 70S-1201-1 (NA) m 609.00 6.09 615.09
1556 70S-1604 (NA) m Deleted Deleted
1557 70S-1801 (NA) m 464.50 4.65 469.15
1558 PT-5157 (NA) m 515.50 5.16 520.66
1559 PT-5158 (NA) m 368.50 3.69 372.19
1560 PT-5153 (NA) m 135.50 1.36 136.86
1561 PT-5154 (NA) m 275.00 2.75 277.75
1562 70SM-1011 (NA) m 674.00 6.74 680.74
1563 PT-5159 (NA) m 679.50 6.80 686.30
1564 SPR 105 (NA) m 713.00 7.13 720.13
1565 SPR 106 (NA) m 610.00 6.10 616.10
1566 SPR 110 (NA) m 309.00 3.09 312.09
1567 SPR 4521 (NA) m 500.50 5.01 505.51
1568 3303AA Rubber Beading m 37.50 0.38 37.88
1569 DG 01 (NA) m 356.00 3.56 359.56
1570 DG 101 (NA) m 307.00 3.07 310.07
1571 80S-2701 (NA) m 873.50 8.74 882.24
1572 80S-2801 (NA) m 1,098.00 10.98 1,108.98
1573 CA-1114 (NA) m 951.50 9.52 961.02
Aluminium Extrusions (Bronze Anodized)
1601 70S-1101-1 (BA) m 744.50 7.45 751.95
1602 70S-1001-1 (BA) m 785.00 7.85 792.85
1603 70S-1201-1 (BA) m 620.50 6.21 626.71
1604 70S-1601(BA) m 603.00 6.03 609.03
1605 70S-1701(BA) m 549.50 5.50 555.00
1606 70S-1501 (BA) m 694.50 6.95 701.45
1607 70S-1401 (BA) m 523.00 5.23 528.23
1608 70SFL-103 (BA) m 1,222.50 12.23 1,234.73
1609 70SFL-102 (BA) m 483.00 4.83 487.83
BSR (Vol-11) page 86
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1610 GL-107 (BA) m 231.50 2.32 233.82
1611 DG-02 (BA) m 393.50 3.94 397.44
1612 DG-102 (BA) m 338.50 3.39 341.89
1613 CA-1011(BA) m 843.50 8.44 851.94
1614 CA-1012 (BA) m 1,298.00 12.98 1,310.98
1615 100D-1914 (BA) m 195.50 1.96 197.46
1616 CA-1007 (BA) m 423.00 4.23 427.23
1617 CA-1008 (BA) m 742.00 7.42 749.42
1618 CA-2005 (BA) m 765.50 7.66 773.16
1619 A-111 m 727.00 7.27 734.27
1620 DG-103 (BA) m 260.00 2.60 262.60
1621 DG-101(BA) m 312.50 3.13 315.63
1622 CA-2004 (BA) m 601.00 6.01 607.01
1623 GL-107 (BA) m 231.50 2.32 233.82
1624 CA-1003 (BA) m Deleted Deleted
1625 CA-1004 (BA) m Deleted Deleted
1626 CA-2006 (BA) m Deleted Deleted
1627 DG-04(BA) m 316.50 3.17 319.67
1628 DG-102(BA) m 338.50 3.39 341.89
1629 CA-1001 (BA) m Deleted Deleted
1630 CA-1002 (BA) m Deleted Deleted
1631 100D-3105 (BA) m 1,355.00 13.55 1,368.55
1632 100D-101 (BA) m 1,361.00 13.61 1,374.61
1633 100D-103 (BA) m 1,430.00 14.30 1,444.30
1634 100D-201 (BA) m 1,315.00 13.15 1,328.15
1635 100D-301 (BA) m 1,576.50 15.77 1,592.27
1636 100D-401 (BA) m 1,733.50 17.34 1,750.84
1637 100D-501 (BA) m 186.00 1.86 187.86
1638 70D-1910 (BA) m 196.00 1.96 197.96
1639 100D-3503A (BA) m 986.50 9.87 996.37
1640 100D-3004 (BA) m 1,138.00 11.38 1,149.38
1641 100D-3207 (BA) m Deleted Deleted
1642 100D-3503 (BA) m 1,089.00 10.89 1,099.89
1643 100D-1914 (BA) m 195.50 1.96 197.46
1644 100D-3203 (BA) m Deleted Deleted
1645 70S-1002-1(BA) m 558.50 5.59 564.09
1646 70S-1102-1 (BA) m 384.50 3.85 388.35
1647 70S-1202-1(BA) m 392.00 3.92 395.92
1648 70S-1701A (BA) m 703.00 7.03 710.03
1649 70S-1402-1 (BA) m 500.50 5.01 505.51
1650 70S-1801 (BA) m 474.00 4.74 478.74
1651 70S-1101-2 (BA) m Deleted Deleted
1652 70S-1001-1 (BA) m 785.00 7.85 792.85
1653 70S-1704 (BA) m Deleted Deleted
1654 70S-1402-1 (BA) m 500.50 5.01 505.51
1655 70S-1201-1 (BA) m 620.50 6.21 626.71
1656 70S-1601 (BA) m 603.00 6.03 609.03
1657 70S-1801 (BA) m 474.00 4.74 478.74
1658 PT-5157 (BA) m 525.00 5.25 530.25
1659 PT-5158 (BA) m 381.50 3.82 385.32
1660 PT-5153 (BA) m 141.00 1.41 142.41
1661 PT-5154 (BA) m 281.00 2.81 283.81
1662 70SM-1011 (BA) m 686.50 6.87 693.37
1663 PT-5159 (BA) m 689.00 6.89 695.89
1664 SPR 105 (BA) m 727.00 7.27 734.27
1665 SPR 106 (BA) m 621.50 6.22 627.72
BSR (Vol-11) page 87
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1666 SPR 110 (BA) m 315.00 3.15 318.15
1667 SPR 4521 (BA) m 510.00 5.10 515.10
1668 3303AA Rubber Beading m 37.50 0.38 37.88
1669 DG 01 (BA) m 371.50 3.72 375.22
1670 DG 101 (BA) m 312.50 3.13 315.63
1671 80S-2701 (BA) m 890.50 8.91 899.41
1672 80S-2801 (BA) m 1,120.00 11.20 1,131.20
1673 CA-1114 (BA) m 970.50 9.71 980.21
Aluminium Extrusions (Powder Coated)
1701 70S-1101-1 (PC) m 843.00 8.43 851.43
1702 70S-1001-1 (PC) m 862.50 8.63 871.13
1703 70S-1201-1 (PC) m 701.50 7.02 708.52
1704 70S-1601 (PC) m 683.00 6.83 689.83
1705 70S-1701 (PC) m 605.50 6.06 611.56
1706 70S-1501 (PC) m 774.50 7.75 782.25
1707 70S-1401(PC) m 593.00 5.93 598.93
1708 70SFL-103 (PC) m 1,380.50 13.81 1,394.31
1709 70SFL-102 (PC) m 531.50 5.32 536.82
1710 GL-107 (PC) m 250.00 2.50 252.50
1711 DG-02 (PC) m 429.50 4.30 433.80
1712 DG-102 (PC) m 383.50 3.84 387.34
1713 CA-1011(PC) m 928.50 9.29 937.79
1714 CA-1012 (PC) m 1,421.00 14.21 1,435.21
1715 100D-1914 (PC) m 220.50 2.21 222.71
1716 CA-1007 (PC) m 479.00 4.79 483.79
1717 CA-1008 (PC) m 831.50 8.32 839.82
1718 CA-2005 (PC) m 864.50 8.65 873.15
1719 A-111 m 821.50 8.22 829.72
1720 DG-103 (PC) m 293.50 2.94 296.44
1721 DG-101(PC) m 353.50 3.54 357.04
1722 CA-2004 (PC) m 649.50 6.50 656.00
1723 GL-107 (PC) m 250.00 2.50 252.50
1724 CA-1003 (PC) m Deleted Deleted
1725 CA-1004 (PC) m Deleted Deleted
1726 CA-2006 (PC) m Deleted Deleted
1727 DG-04 (PC) m 357.50 3.58 361.08
1728 DG-102(PC) m 383.50 3.84 387.34
1729 CA-1001 (PC) m Deleted Deleted
1730 CA-1002 (PC) m Deleted Deleted
1731 100D-3105 (PC) m 1,530.50 15.31 1,545.81
1732 100D-101 (PC) m 1,540.50 15.41 1,555.91
1733 100D-103 (PC) m 1,612.00 16.12 1,628.12
1734 100D-201 (PC) m 1,485.50 14.86 1,500.36
1735 100D-301 (PC) m 1,771.00 17.71 1,788.71
1736 100D-401 (PC) m 1,961.00 19.61 1,980.61
1737 100D-501 (PC) m 210.00 2.10 212.10
1738 70D-1910 (PC) m 221.50 2.22 223.72
1739 100D-3503A (PC) m 1,117.00 11.17 1,128.17
1740 100D-3004 (PC) m 1,286.00 12.86 1,298.86
1741 100D-3207 (PC) m Deleted Deleted
1742 100D-3503 (PC) m 1,177.00 11.77 1,188.77
1743 100D-1914 (PC) m 220.50 2.21 222.71
1744 100D-3203 (PC) m Deleted Deleted
1745 70S-1002-1(PC) m 614.50 6.15 620.65
1746 70S-1102-1 (PC) m 432.50 4.33 436.83
1747 70S-1202-1(PC) m 443.00 4.43 447.43
BSR (Vol-11) page 88
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1748 70S-1701A (PC) m 794.00 7.94 801.94
1749 70S-1402-1 (PC) m 561.00 5.61 566.61
1750 70S-1801 (PC) m 535.00 5.35 540.35
1751 70S-1101-2 (PC) m Deleted Deleted
1752 70S-1001-1 (PC) m 862.50 8.63 871.13
1753 70S-1704 (PC) m Deleted Deleted
1754 70S-1402-1 (PC) m 561.00 5.61 566.61
1755 70S-1201-1 (PC) m 701.50 7.02 708.52
1756 70S-1604 (PC) m Deleted Deleted
1757 70S-1801 (PC) m 535.00 5.35 540.35
1758 PT-5157 (PC) m 576.00 5.76 581.76
1759 PT-5158 (PC) m 429.00 4.29 433.29
1760 PT-5153 (PC) m 172.50 1.73 174.23
1761 PT-5154 (PC) m 316.50 3.17 319.67
1762 70SM-1011 (PC) m 776.50 7.77 784.27
1763 PT-5159 (PC) m 764.00 7.64 771.64
1764 SPR 105 (PC) m 823.00 8.23 831.23
1765 SPR 106 (PC) m 704.00 7.04 711.04
1766 SPR 110 (PC) m 356.00 3.56 359.56
1767 SPR 4521 (PC) m 576.50 5.77 582.27
1768 3303AA Rubber Beading m 37.50 0.38 37.88
1769 DG 01 (PC) m 396.50 3.97 400.47
1770 DG 101 (PC) m 353.50 3.54 357.04
1771 80S-2701 (PC) m 1,006.00 10.06 1,016.06
1772 80S-2801 (PC.) m 1,265.00 12.65 1,277.65
1773 CA-1114 (PC) m 1,096.00 10.96 1,106.96
Accessories
1801 Sliding lock (Heavy duty) Nr 591.50 5.92 597.42
1802 Roller-70mm Nr 74.00 0.74 74.74
1803 S.T. Screw - 1" No.8 Nr 2.00 0.02 2.02
1804 Gasket m 55.00 0.55 55.55
1805 Wool felt m 26.50 0.27 26.77
1806 Pop rivet 5/32"x1/2" Nr 2.00 0.02 2.02
1807 Plastic guide Nr 2.00 0.02 2.02
1808 Cap 3/8" dia. Nr 2.00 0.02 2.02
1809 S.T. Screw - 2" No.8 Nr 3.50 0.04 3.54
1810 Casement lock Nr 170.00 1.70 171.70
1811 Bar hinges (12") Pair 343.50 3.44 346.94
1812 Weather strip m 17.50 0.18 17.68
1813 Pop rivet 3/16"x1/2" Nr 3.50 0.04 3.54
1814 Self tapping Screw - No.8 x 1/2' Nr 3.00 0.03 3.03
1815 Door lock Nr 591.50 5.92 597.42
1816 Butt hinge (2.5"x4") Nr 130.50 1.31 131.81
1817 Door handle with cap nut Pair 748.00 7.48 755.48
1818 Revert (C Sk) 5/32"x1/2" Nr 2.00 0.02 2.02
1819 Threaded bar with nut m 157.00 1.57 158.57
1820 Door closer Nr 2,400.00 24.00 2,424.00
1821 Pop rivet 1/8"x1/2" Nr 1.50 0.02 1.52
1822 G. I. Channel m 143.50 1.44 144.94
1823 White board 8' x 4', (2.5~3.0 mm) m² 266.00 2.66 268.66
1824 Chip board (12 mm) m² 601.00 6.01 607.01
1825 Melamine board (6mm thick) m² 816.00 8.16 824.16
1826 Composite Paneled Board (3mmthick) m² 3,130.50 31.31 3,161.81
1827 Floor Hinges Nr 8,027.00 80.27 8,107.27
1828 Cladding sheet (4mm thick) Single side m² 1,751.50 17.52 1,769.02
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
1829 Cladding sheet(4mm thick) Double side m² 1,751.50 17.52 1,769.02
1830 Cladding sheet(3mm thick) Double side m² 1,087.00 10.87 1,097.87
1831 Cladding sheet(4mm thick) -for Out Door m² 5,103.00 51.03 5,154.03
1832 Power boit lock Nr 167.50 1.68 169.18
1833 8 x 2" Self Tapping Screw Nr 3.50 0.04 3.54
1834 25x25 Aluminium "L' Angle m 120.00 1.20 121.20
1835 Flush bolt Nr 413.50 4.14 417.64
Glazier
1901 5mm thick figured glass panes m² 1,542.00 15.42 1,557.42
1902 3mm thick figured glass panes m² 798.50 7.99 806.49
1903 5mm thick clear glass panes m² 1,123.00 11.23 1,134.23
1904 3mm thick clear glass panes m² 749.00 7.49 756.49
1905 5mm thick tinted glass panes m² 1,729.00 17.29 1,746.29
1906 3mm thick tinted glass panes m² 936.00 9.36 945.36
1907 12mmx12mm teak beading m 11.50 0.12 11.62
Plasterer
2001 Lime kg 26.50 0.27 26.77
Plumber
2101 12mm (1/2") ball valve - Brass Nr 809.00 8.09 817.09
2102 12mm (1/2") ball valve - PVC Nr 137.00 1.37 138.37
2103 20mm (3/4") ball valve - Brass Nr 1,130.50 11.31 1,141.81
2104 20mm (3/4") ball valve - PVC Nr 129.00 1.29 130.29
2105 25mm (1") ball valve - Brass Nr 1,261.00 12.61 1,273.61
2106 25mm (1") ball valve - PVC Nr 206.50 2.07 208.57
2107 38mm (1 1/4") ball valve - Brass Nr 2,696.00 26.96 2,722.96
2108 38mm (1 1/2") ball valve - PVC Nr 426.50 4.27 430.77
2109 12mm (1/2") bib tap - Brass Nr 515.50 5.16 520.66
2110 12mm (1/2") bib tap - Chromium Plated Nr 1,078.50 10.79 1,089.29
2111 12mm (1/2") bib tap - PVC Nr 254.00 2.54 256.54
2112 12mm (1/2") gate valve - Brass Nr 720.00 7.20 727.20
2113 12mm (1/2") gate valve - PVC Nr 184.00 1.84 185.84
2114 20mm (3/4") gate valve - Brass Nr 1,130.00 11.30 1,141.30
2115 20mm (3/4") gate valve - PVC Nr 305.00 3.05 308.05
2116 25mm (1") gate valve - Brass Nr 1,339.50 13.40 1,352.90
2117 25mm (1") gate valve - PVC Nr 429.50 4.30 433.80
2118 38mm (1 1/4") gate valve - Brass Nr 2,078.00 20.78 2,098.78
2119 38mm (1 1/2") gate valve - PVC Nr 539.50 5.40 544.90
2120 20mm (1/2") PVC pipes PNT14 m 44.00 0.44 44.44
2121 20mm (1/2") PVC pipes PNT9 m 170.50 1.71 172.21
2122 20mm (1/2") PVC pipes m 127.00 1.27 128.27
2123 25mm (3/4") PVC pipes PNT11 m 85.50 0.86 86.36
2124 25mm (3/4") PVC pipes PNT9 m Deleted Deleted
2125 25mm (3/4") PVC pipes m Deleted Deleted
2126 32mm (1") PVC pipes PNT11 m 161.50 1.62 163.12
2127 32mm (1") PVC pipes PNT9 m 144.00 1.44 145.44
2128 32mm (1") PVC pipes PNT7 m 65.00 0.65 65.65
2129 40mm (1 1/4") PVC pipes PNT11 m 218.50 2.19 220.69
2130 40mm (1 1/4") PVC pipes PNT9 m 197.00 1.97 198.97
2131 40mm (1 1/4") PVC pipes PNT7 m 153.50 1.54 155.04
2132 50mm (1 1/2") PVC pipes PNT11 m 331.00 3.31 334.31
2133 50mm (1 1/2") PVC pipes PNT9 m 298.00 2.98 300.98
2134 50mm (1 1/2") PVC pipes PNT7 m 237.00 2.37 239.37
2135 63mm (2") PVC pipes PNT11 m 596.00 5.96 601.96
2136 63mm (2") PVC pipes PNT9 m 536.50 5.37 541.87
2137 63mm (2") PVC pipes PNT7 m 416.50 4.17 420.67
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
2138 75mm (2 1/2") PVC pipes PNT9 m 927.00 9.27 936.27
2139 75mm (2 1/2") PVC pipes PNT7 m 736.50 7.37 743.87
2140 90mm (3") PVC pipes PNT9 m 1,053.50 10.54 1,064.04
2141 90mm (3") PVC pipes PNT7 m 772.50 7.73 780.23
2142 110mm (4") PVC pipes PNT9 m 1,557.50 15.58 1,573.08
2143 110mm (4") PVC pipes PNT7 m 1,206.50 12.07 1,218.57
2144 12mm (1/2") Angle valve - Chromium Plated Nr 1,078.50 10.79 1,089.29
2144 B 12mm (1/2") Angle valve - PVC Nr 300.50 3.01 303.51
2145 12mm (1/2") PVC flexible horse (450mm) Nr 226.50 2.27 228.77
Sanitary Fittings
2201 Kitchen sink with single bowl and single drain board Nr 3,913.50 39.14 3,952.64
2202 Kitchen sink with single bowl and double drain board Nr 11,160.50 111.61 11,272.11
Kitchen sink with single bowl special and double
2202A Nr 14,594.50 145.95 14,740.45
drain board
2203 Kitchen sink with double bowl and double drain board Nr 14,165.50 141.66 14,307.16
2204 Heavy quality chromium plated swan tap Nr 1,957.00 19.57 1,976.57
2205 Tee Iron brackets Nr 300.00 3.00 303.00
2206 Ceramic wash basin Nr 4,348.00 43.48 4,391.48
2207 Ceramic wash basin - Pedestal /Ordinary Nr 7,400.00 74.00 7,474.00
Ceramic wash basin - Pedestal /Semi luxury (Ideal,
2208 Nr 18,608.00 186.08 18,794.08
American, British)
Ceramic wash basin special / luxury Pedestal (Ideal,
2208A Nr 28,261.00 282.61 28,543.61
American, British)
2209 Heavy quality chromium plated pillar tap Nr 1,717.00 17.17 1,734.17
Ceramic squatting pan with trap and ceramic foot
2210 Nr 2,174.00 21.74 2,195.74
rests
Square type ceramic squatting pan with foot rests and
2211 Nr 2,652.50 26.53 2,679.03
trap
2212 9 liters capacity high level ceramic cistern Nr 3,262.50 32.63 3,295.13
2212A 9 liters capacity high level ceramic cistern special Nr 6,957.00 69.57 7,026.57
2213 9 liters capacity high level PVC cistern Nr 3,261.00 32.61 3,293.61
2214 9 liters capacity low level ceramic cistern Nr 3,913.50 39.14 3,952.64
2214A 9 liters capacity low level ceramic cistern special Nr 6,957.00 69.57 7,026.57
2215 9 liters capacity low level PVC cistern Nr 3,261.00 32.61 3,293.61
2215A 9 liters capacity low level PVC cistern special Nr 3,005.00 30.05 3,035.05
2216 Low level ceramic water closet Nr 3,005.00 30.05 3,035.05
2216A Low level ceramic water closet special Nr 11,590.00 115.90 11,705.90
Closed couple ceramic water closet without wash
2217 A Nr 12,389.50 123.90 12,513.40
basin /Ordinary
Closed couple ceramic water closet (British) special
2217 B Nr 21,000.00 210.00 21,210.00
/Semi luxury
Closed couple ceramic water closet (British) special
2217C Nr 33,043.50 330.44 33,373.94
/luxury
2218 Bowl type urinal Nr 6,522.00 65.22 6,587.22
2218A Bowl type urinal with flush valve(British) special Nr 22,783.00 227.83 23,010.83
2219 40mm Bottle Trap Nr 565.50 5.66 571.16
2220 Chromium plated Bidet shower Nr 1,502.50 15.03 1,517.53
2220 B PVC Bidet shower Nr 739.50 7.40 746.90
2221 PVC Seat cover Nr 800.00 8.00 808.00
2222 Bathroom mirror Nr 1,288.00 12.88 1,300.88
2223 Chromium Plated Soap Tray Nr 644.00 6.44 650.44
2224 Ceramic Soap Tray Nr 558.50 5.59 564.09
2224A Ceramic Soap Tray special Nr 1,502.50 15.03 1,517.53
BSR (Vol-11) page 91
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
2225 Chromium Plated Tooth brush holder Nr 652.50 6.53 659.03
2226 Ceramic Tooth brush holder Nr 891.50 8.92 900.42
2227 Chromium Plated 100 mm dia. Shower Rose Nr 1,478.50 14.79 1,493.29
Chromium Plated 100 mm dia. Shower Rose with bar
2227 B Nr 7,717.50 77.18 7,794.68
(English)
2228 PVC 100 mm dia. Shower Rose Nr 129.00 1.29 130.29
2229 Chromium Plated toilet paper holder (Normal) Nr 737.50 7.38 744.88
2229 B Chromium Plated toilet paper holder (English) Nr 2,435.00 24.35 2,459.35
2230 Ceramic Toilet paper holder (Normal) Nr 1,073.50 10.74 1,084.24
2230 B Ceramic Toilet paper holder (English) Nr 3,219.50 32.20 3,251.70
2231 Chromium Plated Towel rail Nr 2,254.50 22.55 2,277.05
2232 Ceramic Towel rail Nr 1,951.00 19.51 1,970.51
2233 Chromium Plated conceal valve for shower (Normal) Nr 1,434.00 14.34 1,448.34
2233 B Chromium Plated conceal valve for shower (English) Nr 2,609.00 26.09 2,635.09
Roof Plumber
2301 PVC eave gutters 12'-0" m 231.50 2.32 233.82
2302 End cap Nr 107.00 1.07 108.07
2303 Joint m 107.50 1.08 108.58
2304 Gutter joiner Nr 108.00 1.08 109.08
2305 Gutter brackets Nr 50.00 0.50 50.50
2306 Running head Nr 247.00 2.47 249.47
2307 87.5 mm dia. PVC down pipes m 103.50 1.04 104.54
2308 87.5 mm dia. PVC socket Nr 98.50 0.99 99.49
2309 87.5 mm dia. PVC elbows Nr 150.50 1.51 152.01
2310 Clips (PVC) Nr 17.00 0.17 17.17
2311 200mmx200x87.5mm PVC gutter box Nr 707.00 7.07 714.07
2312 Zink Aluminium rainwater eave gutters m 587.00 5.87 592.87
2313 Stop end and plate Nr 163.50 1.64 165.14
2314 Steel brackets Nr 60.50 0.61 61.11
2315 100x100mm Zn-alum down pipes m 552.50 5.53 558.03
2316 150x150mm Zn-alum down pipes m 820.50 8.21 828.71
2317 Nozzles 100 X 100 Nr 266.50 2.67 269.17
2317A Nozzles 150 X 150 Nr 634.50 6.35 640.85
2318 Offsets Nr 361.00 3.61 364.61
2319 Shoes Nr 258.00 2.58 260.58
2320 Clips (Zn/Al) Nr 30.50 0.31 30.81
300x300mm gutter boxes in Zink Alum color coated
2321 Nr 652.50 6.53 659.03
metal sheets
2322 25x25mm N/A Alluminium m 176.00 1.76 177.76
Tinker
2401 0.47 mm Zn/Al sheet m² 1,254.00 12.54 1,266.54
2402 18 gage GI Sheet Nr 2,048.00 20.48 2,068.48
Drain Layer
2501 Copper wire dome Nr 760.00 7.60 767.60
2502 Drainage gully and grate PVC Nr 596.00 5.96 601.96
2502 B Drainage gully and grate Chromium plated Nr 865.50 8.66 874.16
2503 40mm 4-way PVC floor trap Nr 617.50 6.18 623.68
Painter
2601 Lime kg 26.50 0.27 26.77
2602 Glue kg 391.50 3.92 395.42
2603 Yellow ochre kg 73.00 0.73 73.73
2604 Water proofing Cement Paint kg 77.50 0.78 78.28
2605 Wall primer l 344.00 3.44 347.44
2606 Emulsion paint l 826.00 8.26 834.26
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
2607 Weather shield paint l 957.00 9.57 966.57
2608 Enamel paint l 865.50 8.66 874.16
2609 Anticorrosive paint l 848.00 8.48 856.48
2610 Floor paint l 783.00 7.83 790.83
2611 Floor polish kg 761.00 7.61 768.61
2612 Wood primer l 696.00 6.96 702.96
2613 Polyurethane varnish l 783.00 7.83 790.83
2614 Thinner l 383.00 3.83 386.83
2615 Turpentine l 348.00 3.48 351.48
2616 Potty (from 28 kg bucket) kg 99.50 1.00 100.50
2617 Oil Primer l 1,130.50 11.31 1,141.81
2618 Auto paint l 1,304.50 13.05 1,317.55
2619 Roofing paint l 1,000.00 10.00 1,010.00
2620 Black Board paint (Green/Black) l 904.50 9.05 913.55
2622 Roof shield water base (all colours) paint l 1,196.00 11.96 1,207.96
2621 Primer base for alluminium & G,I Surface l 1,526.50 15.27 1,541.77
Electrical Installation
2701 1/1.13 mm Cu\PVC\PVC ( 1 sq.mm) m 23.00 0.23 23.23
2702 7/0.67 mm Cu\PVC ( 2.5 sq.mm)-Earth Cable m 57.50 0.58 58.08
2702B 7/0.85 mm Cu\PVC ( 4 sq.mm)-Earth Cable m 97.00 0.97 97.97
2703 7/0.53mm Cu\PVC\PVC(T)-1.5sq.mm m Deleted Deleted
2704 7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm m 123.50 1.24 124.74
2705 7/1.04mm Cu\PVC\PVC(T)-6sq.mm m 283.00 2.83 285.83
2705B 7/1.70mm Cu\PVC\PVC(T)-16sq.mm m 665.50 6.66 672.16
2706 Holder Nr 96.00 0.96 96.96
2707 Sun box Nr 41.00 0.41 41.41
2708 Switch Nr 135.00 1.35 136.35
2710 5A socket outlet Nr Deleted Deleted
2711 13A socket outlet -Square pin/Type G Nr 391.50 3.92 395.42
2712 15A socket outlet Nr Deleted Deleted
2713 Ceiling rose Nr 96.00 0.96 96.96
2714 Round block Nr Deleted Deleted
2715 Fan hook Nr 213.50 2.14 215.64
2716 Compact Fluorescent Lamp (CFL) (20W) Nr 420.00 4.20 424.20
2716B Compact Fluorescent Lamp (CFL) (14W) Nr 320.00 3.20 323.20
2717 Weather proofed lamp fitting (outdoor) Nr 1,522.00 15.22 1,537.22
2718 Wall bracket lamp fitting (Indoor) Nr 4,130.50 41.31 4,171.81
2719 6W LED Panel Light (Sunk/Surface) Nr 609.00 6.09 615.09
2720 9W LED Panel Light (Sunk/Surface) Nr 870.00 8.70 878.70
2721 12W LED Panel Light (Sunk/Surface) Nr 957.00 9.57 966.57
2722 15W LED Panel Light (Sunk/Surface) Nr 1,130.50 11.31 1,141.81
2723 18W LED Panel Light (Sunk/Surface) Nr 1,217.50 12.18 1,229.68
2724 24W LED Panel Light (Sunk/Surface) Nr 2,130.50 21.31 2,151.81
2725 1400mm Sweep Ceiling Fan Nr 7,500.00 75.00 7,575.00
2726 300x300mm Exhaust fan Nr 8,000.00 80.00 8,080.00
2727 Wall Mounted Fan (Around 60W) Nr 10,400.00 104.00 10,504.00
2728 40 Amp single phase main switch Nr 913.50 9.14 922.64
2729 63Amp single phase main switch Nr 913.50 9.14 922.64
2730 6A/10A/16A Amp Circuit breaker Nr 409.00 4.09 413.09
2731 A Distribution board with cover (Type 500)-4way/6way Nr 630.50 6.31 636.81
Distribution board with cover (Type 700)-
2731 B Nr 978.50 9.79 988.29
8way/10way
2731 C Distribution board with cover (Type 900)-12 way Nr 1,391.50 13.92 1,405.42
2731 D 4 Raw Steel Enclosure (350x700x125)mm Nr 11,418.50 114.19 11,532.69
2732 40 Amp three phase main switch Nr 1,835.00 18.35 1,853.35
BSR (Vol-11) page 93
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
2733 63 Amp three phase main switch Nr 1,835.00 18.35 1,853.35
2734 40 Amp single phase RCCB (Trip switch) Nr 2,952.50 29.53 2,982.03
2735 63Amp single phase RCCB (Trip switch) Nr 3,235.00 32.35 3,267.35
2736 40 Amp/30 mA three phase RCCB (Trip switch) Nr 4,343.50 43.44 4,386.94
2737 63 Amp/30 mA three phase RCCB (Trip switch) Nr 4,691.50 46.92 4,738.42
2738 Electrical Bell Nr 322.00 3.22 325.22
2739 GI earth Pipe 2mm thick (50mm dia - 1800mm length) Nr 1,477.00 14.77 1,491.77
2740 50x50x5.8 mm Angle Iron m 826.50 8.27 834.77
2741 20A/25A/32A Amp Circuit breaker Nr 409.00 4.09 413.09
2742 3/4" PVC conduit pipe (20mm) m 47.00 0.47 47.47
2709 1" PVC Conduit pipe (25mm) m 59.50 0.60 60.10
2743 1 1/2" PVC Conduit pipe (40mm) m 139.50 1.40 140.90
2744 1" PVC Casing with capping m 65.50 0.66 66.16
2745 1 1/2" PVC casing with capping m 117.50 1.18 118.68
2746 2"x 1" PVC casing with capping m 161.00 1.61 162.61
2746A 2"x 2" PVC casing with capping m 285.00 2.85 287.85
2747 4"x 2" PVC casing with capping m 502.00 5.02 507.02
2748 7W CFL Bulb (B22/E27) Nr 320.00 3.20 323.20
2749 10W CFL Bulb (B22/E27) Nr 320.00 3.20 323.20
2750 14W CFL Bulb (B22/E27) Nr 320.00 3.20 323.20
2751 18W CFL Bulb (B22/E27) Nr 411.00 4.11 415.11
2752 3W LED Bulb (B22/E27) Nr 217.50 2.18 219.68
2753 5W LED Bulb (B22/E27) Nr 304.50 3.05 307.55
2754 7W LED Bulb (B22/E27) Nr 391.50 3.92 395.42
2755 9W LED Bulb (B22/E27) Nr 478.50 4.79 483.29
2756 12W LED Bulb (B22/E27) Nr 609.00 6.09 615.09
Special Decorative 1 Gang One Way Switch (Big
2757 Nr 217.50 2.18 219.68
toggle)
Special Decorative 2 Gang One Way Switch (Big
2758 Nr 304.50 3.05 307.55
toggle)
Special Decorative 3 Gang One Way Switch (Big
2759 Nr 391.50 3.92 395.42
toggle)
Special Decorative 1 Gang Two Way Switch (Big
2760 Nr 343.50 3.44 346.94
toggle)
Special Decorative Universal Socket Outlet (Big
2761 Nr 778.50 7.79 786.29
toggle)
2762 Special Decorative 13A Socket Outlet (Big toggle) Nr 670.00 6.70 676.70
2763 Special Decorative 15A Socket Outlet (Big toggle) Nr 691.50 6.92 698.42
Miscellaneous Work
2801 PVC coated gauge 10 chain link mesh m² 754.50 7.55 762.05
2802 2" GI pipes (2mm) 2.3mm m 775.50 7.76 783.26
2803 1 1/2" GI pipes (2.3mm) m 589.50 5.90 595.40
2804 1" GI pipes (2mm) m 350.50 3.51 354.01
2805 Barbed wire (25kg) m 20.00 0.20 20.20
2806 Hooks and washers Nr 17.50 0.18 17.68
2807 Concrete fence posts 6'-0" Nr 935.00 9.35 944.35
2808 Concrete fence posts 6'-6" Nr 957.00 9.57 966.57
2809 Concrete fence posts 7'-0" (7.6) Nr 1,100.00 11.00 1,111.00
2810 Concrete fence posts 8'-0" Nr 1,478.50 14.79 1,493.29
2811 Concrete fence posts 10'-6" Nr 2,609.50 26.10 2,635.60
2812 Concrete fence supporting posts for corner posts Nr 2,261.00 22.61 2,283.61
2813 2" GI pipes (2.3mm) m 820.50 8.21 828.71
2814 2" GI pipes (1.5mm) m 372.50 3.73 376.23
2815 1 1/2" GI pipes (2.3mm) m 624.00 6.24 630.24
2816 1 1/2" GI pipes (1.5mm) m 305.00 3.05 308.05
BSR (Vol-11) page 94
PROVINCIAL DEPARTMENT OF BUILDINGS- UVA PROVINCIAL COUNCIL
SCHEDULE OF RATES FOR BUILDING WORKS - RATES FOR 2019
BADULLA / MONERAGALA DISTRICTS
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
2817 1 1/4" GI pipes (2.3mm) m 546.00 5.46 551.46
2818 1 1/4" GI pipes (1.8mm) m 270.00 2.70 272.70
2819 1 1/4" GI pipes (1.5mm) m 250.50 2.51 253.01
2820 1 " GI pipes (2.0mm) m 371.00 3.71 374.71
2821 1 " GI pipes (1.5mm) m 199.50 2.00 201.50
2822 12mm thick MDF board m² 688.50 6.89 695.39
2823 12 mm thick regiform board m² 318.50 3.19 321.69
2824 Velvet cloth m² 330.50 3.31 333.81
2825 Chicken mesh m² 220.00 2.20 222.20
Gabion box (Box size in meters)(Heavy galvanized
3000
& PVC coated)
3001 Gabion box 1x0.5x0.5m nr 2,609.00 26.09 2,635.09
3002 Gabion box 1x1x0.5m nr 3,209.00 32.09 3,241.09
3003 Gabion box 1x1x1m nr 4,344.50 43.45 4,387.95
3004 Gabion box 1.5x1x0.5m nr 3,554.50 35.55 3,590.05
3005 Gabion box 1.5x1x1m nr 5,300.00 53.00 5,353.00
3006 Gabion box 2x0.5x0.5m nr 4,423.50 44.24 4,467.74
3007 Gabion box 2x1x0.5m nr 5,889.50 58.90 5,948.40
3008 Gabion box 2x1x1m nr 6,800.00 68.00 6,868.00
3009 Gabion box 2x2x1m nr 12,500.00 125.00 12,625.00
3010 Gabion box 2.5x1x1m nr 9,478.00 94.78 9,572.78
3011 Gabion box 2x1.5x0.5m nr 6,798.50 67.99 6,866.49
3012 Gabion box 2x1.5x1m nr 9,774.50 97.75 9,872.25
3013 Gabion box 2.5x1x0.5m nr 7,548.50 75.49 7,623.99
3014 Gabion box 3x1x0.5m nr 9,724.50 97.25 9,821.75
3015 Gabion box 3x1x1m nr 10,200.00 102.00 10,302.00
3016 Gabion box 3x1.5x1m nr 15,673.00 156.73 15,829.73
3017 Gabion box 4x1x0.5m nr 11,190.00 111.90 11,301.90
3018 Gabion box 4x1x1m nr 13,624.50 136.25 13,760.75
3019 Gabion box 4x1.5x1m nr 18,622.50 186.23 18,808.73
3020 Gabion box 4x2x1m nr 27,713.50 277.14 27,990.64
3021 Gabion box 2.5x1x0.3m nr 6,254.50 62.55 6,317.05
3022 Gabion box 2.5x2x0.3m nr 11,067.00 110.67 11,177.67
3023 Gabion box 3x2x0.3m nr 10,889.50 108.90 10,998.40
3024 Gabion box 6x2x0.23m nr 26,593.00 265.93 26,858.93
3040 Shuttered Angle (Racks Iron) 1.6mm thick m 240.50 2.41 242.91
3041 Shuttered Angle (Racks Iron)2mm thick m 330.50 3.31 333.81
Rate 2019
Market Price Trans.
ITEM DESCRIPTION UNIT (Without
2019 Rs. Cost Rs.
VAT) Rs.
3059 Butt hinges (Brass) 6"x6" 1 pair 3,217.50 32.18 3,249.68
3060 Butt hinges (Brass) 5"x5" 1 pair 2,000.00 20.00 2,020.00
3061 Butt hinges (Brass) 4"x4" 1 pair 1,304.50 13.05 1,317.55
Stainless steel Round Tube
3078 Stainless steel 1/2" 1 Bar 1,460.00 14.60 1,474.60
3079 Stainless steel 3/4" 1 Bar 2,220.00 22.20 2,242.20
3080 Stainless steel 1" 1 Bar 2,920.00 29.20 2,949.20
3081 Stainless steel 1 1/4" 1 Bar 3,600.00 36.00 3,636.00
3082 Stainless steel 1 1/2" 1 Bar 4,800.00 48.00 4,848.00
3083 Stainless steel pipe (1.2 mm thick) 1 1/2" 1m 1,200.00 12.00 1,212.00
3084 Stainless steel pipe (1.2 mm thick) 2" 1m 1,450.00 14.50 1,464.50
3085 Stainless steel cups 2 1/2" nr 350.00 3.50 353.50
3086 Stainless steel cups 2" nr 100.00 1.00 101.00
3087 Stainless steel cups 1 1/2" nr 90.00 0.90 90.90
3088 Stainless steel cups 1/2" nr 70.00 0.70 70.70
3089 Stainless steel ball 3 1/2" nr 520.50 5.21 525.71
3090 Stainless steel ball 3" nr 500.00 5.00 505.00
3091 Stainless steel ball 2 1/2" nr 450.00 4.50 454.50
3092 Stainless steel ball 2" nr 360.00 3.60 363.60
3093 Stainless steel ball 1 1/2" nr 230.00 2.30 232.30
4000 Tempered Glass 4'x4' sheet (5mm) sq.m 5,131.50 51.32 5,182.82
4001 Tempered Glass 4'x4' sheet (6mm) sq.m 6,158.00 61.58 6,219.58
4002 Tempered Glass 4'x4' sheet (8mm) sq.m 7,091.00 70.91 7,161.91
4003 Tempered Glass 4'x4' sheet (10mm) sq.m 8,957.00 89.57 9,046.57
4004 Tempered Glass 4'x4' sheet (12mm) sq.m 5,081.00 50.81 5,131.81
RATE FOR
ITEM DESCRIPTION UNIT
2019
A - DEMOLISHER
Demolishing Brickwork in cement sand mortar, including stacking bricks and
A-01 m³ 1,633.00
clearing debris as directed.
Demolishing Brickwork in lime sand mortar, including stacking bricks and
A-02 m³ 1,306.00
clearing debris as directed.
Removing existing Timber Ceiling, stacking salvage materials and clearing debris
A-03 m² 131.00
as directed.
Demolishing 75mm thick Cement Concrete Floor and clearing away the debris
A-04 m² 814.00
as directed.
Demolishing reinforced concrete & removing reinforcement and clearing debris
A-05 m³ 9,102.00
as directed.
Removing the existing squatting pan pipe lines and stacking salvage materials
A-06 nr 1,845.00
and clearing debris as directed.
Removing the existing Commode and Bided Shower pipe lines and stacking
A-07 nr 1,845.00
salvage materials and clearing debris as directed.
Removing the existing Wash Basin pipe lines and stacking salvage materials and
A-08 nr 1,005.00
clearing debris as directed.
Removing Corrugated sheets, iron, asbestos or aluminum alloy sheets from
A-09 m² 152.00
roofs or walls and stacking salvage materials and clearing debris as directed.
Removing asbestos corrugated sheets and timber frame, stacking salvage
A-10 m² 157.00
materials and clearing debris as directed.
A-11 Removing door or window, size up to 3.7 sq.m. from existing walls and stacking. nr 1,680.00
A-12 Removing door or window, size over 3.7 sq.m. from existing walls and stacking. nr 2,520.00
Removing only the door or window sashes size up to 3.7 sq.m. from existing
A-13 nr 261.00
frame and stacking.
Removing only the door or window sashes size over 3.7 sq.m. from existing
A-14 nr 389.00
frame and stacking.
Removing the G.I, old or decayed 85mm to150mm dia Down Pipes from
A-15 m 57.00
existing building and stacking.
Removing the PVC old 85mm to150mm dia Down Pipes from existing building
A-16 m 41.00
and stacking.
A-17 Demolishing the Existing Drains and clearing debris. m 168.00
A-18 Removing Expanded metal works from existing frames and stacking. m² 367.00
Removing existing Barbed Wire Fence by uprooting, rolling up the barbed wire,
A-19 m 262.00
stacking salvage materials and clearing debris (length of the fence to be measured)
Demolishing Brick Paved Floor, stacking the salvage bricks and clearing away the
A-20 m² 398.00
debris.
A-21 Removing the Glass Panes in doors, windows, fanlights, etc. and stacking. m² 830.00
A-22 Removing the Eave Gutters from roof and stacking. m 38.00
Removing Wooden Partitions and stacking at site including making good to walls
A-23 m² 749.00
and floors.
A-24 Removing Lime sand plastering by chipping and clearing away debris. m² 90.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Removing the Plastering or Rendering with cement sand mortar by chipping and
A-25 m² 203.00
clearing away the debris in brick walls and brick paved floors.
Removing the Plastering or Rendering with cement sand mortar by chipping
A-26 and clearing away the debris in Cement concrete walls and Cement concrete m² 305.00
paved floors.
Removing tiles and timber of roof, stacking serviceable materials and clearing
A-27 m² 313.00
debris.
Demolishing Rubble Masonry Work with cement sand mortar, stacking rubble
A-28 m³ 2,041.00
and clearing debris.
A-29 Demolishing Wall or Floor Tiles and clearing away the debris. m² 362.00
A-30 Removing Calicut or Half Round Tiles from roofs and stacking at site. m² 149.00
Removing Asbestos Ceiling including timber frame work, stacking serviceable
A-31 m² 446.00
materials and clearing away the debris.
Removing Valance and Barge boarding, stacking serviceable materials and
A-32 m 38.00
clearing away the debris.
Removing Soffit Plastering with cement sand mortar and clearing away the
A-33 m² 280.00
debris.
B - EXCAVATOR
Excavation for Drains to gradient and shape as directed, in any soil except rock
B-01 requiring blasting and depositing the excavated soil within the site, as directed. m³ 845.00
(Bank volume).
Excavation for Foundation in any material except rock requiring blasting,
B-02 levelling and well ramed under foundation.materials within the site as directed m³ 993.00
-Depth 0~1.5m (Bank volume).
Excavation for Foundation in any material except rock requiring blasting,
B-03 levelling and well ramed under foundation. materials within the site as m³ 1,587.00
directed -Depth 1.5~3.0m (Bank volume).
B-04 Rock excavation by blasting and piling as directed (Piled loose volume). m³ 3,651.00
Excavation for Wells in any material except rock requiring blasting and depositing
B-05 m³ 993.00
the excavated soil within 30m distance as directed -Depth 0~1.5m (Bank volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-06 the excavated soil within 30m distance as directed Depth 1.5~3.0m (Bank m³ 1,587.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-07 the excavated soil within 30m distance as directed -Depth 3.0~4.5m (Bank m³ 2,180.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-08 the excavated soil within 30m distance as directed - Depth 4.5~6.0m (Bank m³ 2,774.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-09 the excavated soil within 30m distance as directed -Depth 6.0~7.5m (Bank m³ 3,368.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-10 the excavated soil within 30m distance as directed -Depth 7.5~9.0m (Bank m³ 3,961.00
volume).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Excavation for Wells in any material except rock requiring blasting and depositing
B-11 the excavated soil within 30m distance as directed -Depth 9.0~10.5m (Bank m³ 4,555.00
volume).
Excavation for Wells in any material except rock requiring blasting and depositing
B-12 the excavated soil within 30m distance as directed -Depth 10.5~12m (Bank m³ 5,149.00
volume).
Excavation manually for leveling site in any materials except rock requiring
B-13 blasting, including transporting excavated soil up to 0.4Km , depositing and m³ 658.00
leveling as directed. (Bank volume).
Excavate by machine for leveling site in any materials except rock requiring
B-13A blasting, including transporting excavated soil up to 0.4Km , depositing and m³ Deleted
leveling as directed. (Bank volume).
Filling under floors by spreading, watering and compacting with approved quality
B-14 earth/gravel/sand in 75mm layers by manually as directed (earth/gravel/sand m³ 1,510.00
available at site) - Compacted volume. (Less than 50 m³.)
Filling under floors by spreading, watering and compacting with approved quality
Earth imported from outside in 75mm layers by manually as directed (Cost of
B-15 m³ 2,065.00
transport of sand should be added separately) - Compacted volume.(Less than 50
m³.)
Filling under floors by spreading, watering and compacting with approved
B-16 quality earth in 150mm layers by machinery as directed (earth available at site) m³ 706.00
- Compacted volume. (more than 50 m³.)
Filling under floors by spreading, watering and compacting with approved quality
Earth imported from outside in 150mm layers by machinery as directed (Cost of
B-17 m³ 1,189.00
transport of sand should be added separately) - Compacted volume.(more than 50
m³.)
Filling under floors by spreading, watering and compacting with approved quality
B-18 Gravel imported from outside in 75mm layers by manually as directed (Cost of m³ 2,179.00
transport of gravel should be added separately) - Compacted volume.
Filling under floors by spreading, watering and compacting with approved quality
B-19 Sand imported from outside in 75mm layers by manually as directed (Cost of m³ 4,933.00
transport of sand should be added separately) - Compacted volume.
Filling under floors by spreading, watering and compacting with approved quality
Quarry dust imported from outside in 75mm layers by manually as directed.
B-20 m³ 2,893.00
Rate shall include 30% of 4mm couse particle (Cost of transport Quarry dust of
should be added separately) - Compacted volume.
Cutting and removing trees (including stump) between 300mm-600mm girth
B-21 incuding cutting into required number of pieces including disposal as directed. nr Deleted
Minimum piece shall not be less than 2.5 m in length.
Cutting and removing trees between 601 -1200 mm girth incuding cutting into
B-22 required number of pieces including disposal as directed. Minimum piece shall not nr Deleted
be less than 2 m in length.
Cutting and removing trees (including stump) between 601 -1200 mm girth
B-22A incuding cutting into required number of pieces including disposal as directed. nr Deleted
Minimum piece shall not be less than 2 m in length.
RATE FOR
ITEM DESCRIPTION UNIT
2019
C - CONCRETER
Concrete should be mixed using concrete mixers and poker vibrators should be
used to vibrate concrete. Hand mixing of concrete should only be allowed for
Note
concrete less than 2.83 m³ and unavoidable situations and prior approval should
be obtained from the Engineer.
The rate shall include for plant mixing , handling, hoisting, depositing,
compressing, vibrating of concrete and curing, making good after removal of Note
formwork etc.
Reinforcement and formwork shall be paid separately unless stated in the
Note
description.
Approved for the concrete test report should be obtain by the Engineer.
If concrete redymix is used for SSR provide approved shoud be obtain from
Director Building or Head of the Department.
Ordinary Portland cement should be used unless stated in the description. Note
C-01 Mixing, placing, vibrating and curing 1:2:4(20mm) concrete (Hand mixing). m³ 17,731.00
C-02 Mixing, placing, vibrating and curing 1:2:4(20mm) concrete (Machine mixing). m³ 17,593.00
C-03 Mixing, placing, vibrating and curing 1:3:6(50mm) concrete (Hand mixing). m³ 15,117.00
C-04 Mixing, placing, vibrating and curing 1:3:6(50mm) concrete (Machine mixing). m³ 14,980.00
C-05 Mixing, placing, vibrating and curing 1:2½:5(25mm) concrete (Hand mixing). m³ 16,485.00
C-06 Mixing, placing, vibrating and curing 1:2½:5(25mm) concrete (Machine mixing). m³ 16,347.00
C-07 Mixing, placing, vibrating and curing 1:3:6(25mm) concrete (Hand mixing). m³ 15,537.00
C-08 Mixing, placing, vibrating and curing 1:3:6(25mm) concrete (Machine mixing). m³ 15,400.00
C-09 Mixing, placing, vibrating and curing 1:3:6(38mm) concrete (Hand mixing). m³ 15,117.00
C-10 Mixing, placing, vibrating and curing 1:3:6(38mm) concrete (Machine mixing). m³ 14,980.00
C-11 Mixing, placing, vibrating and curing 1:1½:3(20mm) concrete (Hand mixing). m³ 20,396.00
C-12 Mixing, placing, vibrating and curing 1:1½:3(20mm) concrete (Machine mixing). m³ 20,258.00
C-13 Mixing, placing, vibrating and curing 1:1½:3(12.5mm) concrete (Hand mixing). m³ 20,396.00
C-14 Mixing, placing, vibrating and curing 1:1½:3(12.5mm) concrete (Machine mixing). m³ 20,258.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and placing 75mm thick Slab over drains in 1:2:4(20mm) concrete
C-28 reinforced with Y10@ 150mm c/c both ways. Rate shall include reinforcement m² 4,148.00
and necessary formwork.
Supplying and fixing 100mmx75mmx50mm Spur Stone in 1:2:4(20mm)
C-29 nr 112.00
concrete for door posts including necessary formwork.
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column footings
C-30 m³ 17,731.00
(Hand mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column footings
C-31 m³ 17,593.00
(Machine mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column shafts
C-32 m³ 18,546.00
(Hand mixing).
Mixing, placing, vibrating and curing 1:2:4(20mm) concrete in column shafts
C-33 m³ 18,408.00
(Machine mixing).
RATE FOR
ITEM DESCRIPTION UNIT
2019
D - FORMWORK
Rate shall include for all necessary boarding, supports, erecting, framing, cutting
Note
angles, striking or removal cleaning wetting etc.
Formwork is measured as the next contact surface measurement between
Note
concrete and formwork.
Local timber formwork should be used only for minor works. Note
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-01 m² 724.00
timber planks for Column Footings.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-02 m² 1,881.00
timber planks for Column Shafts.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-03 m² 1,408.00
timber planks for Beams.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-04 m² 1,127.00
timber planks for plinth on ground floor.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-04A m² 1,228.00
plywood sheets for plinth on ground floor.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-05 m² 1,516.00
timber planks for Stair Cases.
Supplying, fabricating, fixing and removing formwork using 25mm thick local
D-06 m² 1,719.00
timber planks for Slabs.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-07 m² 1,689.00
plywood sheets for Column Footings.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-08 m² 2,219.00
plywood sheets for Column Shafts.
Supplying, fabricating, fixing and removing formwork using 18mm thick
D-09 m² 1,673.00
plywood sheets for Beams.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-10 m² 1,895.00
plywood sheets for Stair Cases.
Supplying, fabricating, fixing and removing formwork using 18 mm thick
D-11 m² 2,098.00
plywood sheets for Slabs.
Supplying, fabricating, fixing and removing formwork using 15 mm thick
D-12 m² 1,590.00
plywood sheets for Column Footings.
Supplying, fabricating, fixing and removing formwork using 15 mm thick
D-13 m² 2,097.00
plywood sheets for Column Shafts.
RATE FOR
ITEM DESCRIPTION UNIT
2019
E - REINFORCEMENT
All steel reinforcement should be from cold worked deformed bars and mild steel
bars and carry SLS certificate or equivalent acceptable quality assurance
certificate indicating the yield strength and others as approved by the Engineer.
Rate to include for cutting, bending, fabricating and placing in position holding
Note
and supporting including temporary fixing support hangers, binding wires and
necessary cover blocks as approved by the Engineer. The minimum yield strength
of steel to be as follows.
Tor steel : 460 N/mm² Mild steel : 250 N/mm².
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Mild
E-01 Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc kg 267.00
(Diameter equal to 6mm).
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Mild
E-02 Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc ( kg 270.00
Diameter greater than 6mm).
Supplying, cutting, bending, laying and binding (with 16 BWG binding wires) Tor
E-03 kg 271.00
Steel Reinforcement to slabs, beams, lintels, columns, stair cases, etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Brick work in 1:5 cement and sand mortar in foundation up to DPC level ( Size of
F-02 m³ 13,427.00
the brick should be L=220mm, W=105mm, H=65~100mm ).
Brick work in 1:5 cement and sand mortar in brick piers ( Size of the brick should
F-03 m³ 19,159.00
be L=220mm, W=105mm, H≤65mm ).
Brick work in 1:5 cement and sand mortar in brick piers ( Size of the brick should
F-04 m³ 15,940.00
be L=220mm, W=105mm, H=65~100mm ).
225mm thick brick work in 1:5 cement and sand mortar above DPC level.( Size of
F-05 m³ 17,446.00
the brick should be L=220mm,W=105mm,H≤65mm ).
225mm thick brick work in 1:5 cement and sand mortar above DPC level. ( Size of
F-06 m³ 14,263.00
the brick should be L=220mm, W=105mm, H=65~100mm ).
225mm thick brick work in 1:5 cement and sand mortar using wire cut bricks (
F-07 m³ 28,538.00
Size of the brick should be L=220mm, W=105mm, H=65mm ).
225mm thick brick work in 1:5 cement and sand mortar using batik bricks ( Size
F-08 m³ 29,102.00
of the brick should be L=220mm, W=105mm, H=65mm ).
112mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-09 m² 2,113.00
be L=220mm, W=105mm, H≤65mm ).
112mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-10 m² 1,724.00
be L=220mm, W=105mm, H=65~100mm ).
112mm thick brick work in 1:5 cement and sand mortar using wire cut bricks (
F-11 m² 3,394.00
Size of the brick should be L=220mm, W=105mm, H=65mm ).
112mm thick brick work in 1:5 cement and sand mortar using batik bricks
F-12 m² 3,473.00
(Size of the brick should be L=220mm, W=105mm, H=65mm ).
150mm thick brick work in 1:5 cement and sand mortar ( Size of the brick should
F-13 m² 1,801.00
be L=220mm, W=150mm, H=65~100mm ).
300 mm wide brick drains with 450mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-14 m 3,470.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300 mm wide brick drains with 750mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-15 m 4,055.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
RATE FOR
ITEM DESCRIPTION UNIT
2019
300 mm wide brick drains with 900mm wide ramp in 1:5 cement sand mortar
with 225mm to 300mm average depth, 75mm thick base and 112mm thick side
F-16 m 4,364.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300 mm wide brick drains without ramp in 1:5 cement sand mortar with
225mm to 300mm average depth, 75mm thick base and 112mm thick side walls
F-17 m 2,906.00
inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 450mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-18 m 2,879.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 750mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-19 m 3,481.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains with 900mm wide ramp in 1:5 cement sand mortar
with 150mm to 225mm average depth, 75mm thick base and 112mm thick side
F-20 m 3,773.00
walls inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
225 mm wide brick drains without ramp in 1:5 cement sand mortar with
150mm to 225mm average depth, 75mm thick base and 112mm thick side walls
F-21 m 2,316.00
inclusive of 12mm thick cement rendering in 1:3 cement sand mix. Rate shall
include necessary expansion joints and excavation.
300mm wide, 225mm high brick steps in 1:3 cement, sand mortar and rendering
F-22 with 12mm thick 1:3 cement, sand mortar inclusive of foundations 150mm below m 1,714.00
ground level.
150 mm thick solid cement block in 1:5 cement sand mortar. ( Size of the
F-23 m² 2,535.00
cement block should be L=390mm x W=150mm x H=190mm)
100 mm thick solid cement block in 1:5 cement sand mortar. ( Size of the
F-24 m² 1,724.00
cement block should be L=390mm x W=100mm x H=190mm)
150 mm thick Hollow cement block in 1:5 cement sand mortar with cavities un
F-25 filled. ( Size of the Hollow cement block should be L=390mm x W=150mm x m² 2,191.00
H=190mm)
200 mm thick Hollow cement block in 1:5 cement sand mortar with cavities un
F-26 filled. ( Size of the Hollow cement block should be L=390mm x W=200mm x m² 2,448.00
H=190mm)
RATE FOR
ITEM DESCRIPTION UNIT
2019
G - MASONARY WORK
20 mm thick DPC in 1:3 cement sand mix finished with two coats of DPC tar and
G-01 m² 1,229.00
blinded with sand.
Random Rubble Masonry work for foundations in 1:5 cement, sand mortar using
G-02 m³ 12,587.00
150mm x 225 mm approved quality rubble.
Random Rubble Masonry work for retaining walls in 1:5 cement, sand mortar
G-03 m³ 11,816.00
using 150mm x 225 mm approved quality rubble.
300mm wide, 225mm high masonry steps in 1:5 cement, sand mortar and
G-04 rendering with 12mm thick 1:3 cement, sand mortar inclusive of foundations m 1,291.00
150mm below ground level.
G-05 Supplying and laying 110mm (4") Type PNT 9 PVC pipes as weep hole. m 1,888.00
G-06 Supplying and laying 90mm (3") Type PNT 9 PVC pipes as weep hole. m 1,277.00
G-07 Supplying and laying 63mm (2") Type PNT 9 PVC pipes as weep hole. m 650.00
Packing rubble and aggregate filter layers behind masonry wall.( Rubble should be
G-08 m³ 1,079.00
paid separately)
H - PAVIOR
If the project is situated in very remote area SSR shall be forwarded for the
approvel of the Director Building or Head of the Department.
Anti termite treatment for floor. The method of treating and the chemicals to be
H-01 used should be approved by the Engineer and minimum 10 year warranty m² 276.00
certificate from a recognized organization should be provided.
Application of liquid polymer cement water proofing agent for flat roofs, concrete
or masonry tanks, wet areas of toilets and bathrooms, exposed balconies, concrete
gutters, etc . The water proofing should be done by a specialized sub contractor
H-02 m² 1,634.00
registered at ICTAD and at least 5 year warranty certificate should be provided.
The water proofing material and the method of water proofing should be
approved by the engineer.
Application two coat of liquid polymer cement water proofing agent for flat roofs,
concrete or masonry tanks, wet areas of toilets and bathrooms, exposed balconies,
H-03 m² 630.00
concrete gutters, etc. The water proofing material and the method of water
proofing should be approved by the engineer.
H-04 Expansion joints in concrete floors, filled with 12mm regiform. m 50.00
Supplying and laying G1000 polythene as damp proof membrane with 150mm
H-05 m² 212.00
laps after preparing surface as directed.
Supplying and Laying 220mm x 110mm x80mm size (strength class 25N/mm²)
Interlocking blocks. (Price range Rs.35.00-Rs.40.00) on 50mm thick compacted
H-06 m² 1,925.00
Quary dust layer. Cost of transport of material should be added seperately.
(Colour, pattern and the quality should be approved by the engineer.)
RATE FOR
ITEM DESCRIPTION UNIT
2019
75 mm thick brick paved floor in 1:5 cement, sand mortar and 12mm thick
H-07 m² 2,236.00
cement rendering in 1:2 cement, sand mortar finished smooth with cement putty.
J- TILER
Rates shall include for temporary rules and all normal cutting, arises rounded
angles and the like nature making good around pipes, sanitary fittings and other
Note
fixtures protection and cleaning.The quality and type of tile should be
approved by the engineer.)
Supplying and laying 300mmx300mm Non Skid Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-05 and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the m² 3,767.00
quality should be approved by the engineer).Price range Rs.133.00-Rs.170.00
(Excluding VAT)
Supplying and laying 450mmx450mm Non Skid Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-06 and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the m² 4,172.00
quality should be approved by the engineer) Price range Rs.400.00-Rs.430.00 .
(Excluding VAT)
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying 600mmx400mm Matt Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-18 and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the m² 4,981.00
quality should be approved by the engineer).Price range Rs.593.00-Rs.667.00
(Excluding VAT)
Supplying and laying 600mmx300mm Glazed Ceramic Floor Tiles with
exceptional quality, including 12mm thick tile bedding in 1:3 cement sand mortar
J-19 and pointing with tile grout similar to the colour of tiles.(Colour, pattern and the m² 6,104.00
quality should be approved by the engineer).Price range Rs.645.00-Rs.802.00
(Excluding VAT)
Supplying and laying 600mmx300mm semi Glazed Floor Tiles with exceptional
quality, including 12mm thick tile bedding in 1:3 cement sand mortar and pointing
J-20 m² 5,499.00
with tile grout similar to the colour of tiles.(Colour, pattern and the quality should
be approved by the engineer).Price range Rs.422.00-Rs.643.00 (Excluding VAT)
Supplying and laying 100mm high Ceramic Floor Tile Skirting with exceptional
quality, including 12mm thick tile bedding in 1:3 cement sand mortar and pointing
J-24 m 375.00
with tile grout similar to the colour of tiles.(Colour, pattern and the quality should
be approved by the engineer).Price range Rs.114.00-Rs.123.00 (Excluding VAT)
Supplying and laying 150mm high Non Skid Homogeneous Ceramic Floor Tile
for stair cases & narrow places with exceptional quality, including 12mm thick
J-25 tile bedding in 1:3 cement sand mortar and pointing with tile grout similar to the m Deleted
colour of tiles.(Colour, pattern and the quality should be approved by the
engineer).Price range Rs.35.00-Rs.40.00
Supplying and laying 300mmx300mm Matt Ceramic Floor Tiles for Bath Room
with exceptional quality, including 12mm thick tile bedding in 1:3 cement sand
J-26 mortar and pointing with tile grout similar to the colour of tiles.(Colour, pattern m² 4,165.00
and the quality should be approved by the engineer).Price range Rs.133.00-
Rs.170.00 (Excluding VAT)
J-27 Supplying and laying approved quality PVC beading. m 135.00
J-28 Supplying and laying approved quality stainless steel beading. m 208.00
Supplying and fixing 100mm high Timber Skirting in 20mm thick special class
J-29 timber with treating timber with wood preservative and applying two coats of m 537.00
enamel paint or varnish as directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
K-ROOFER
A. Organization should be provide certificate with 10 years warranty for the
Note
treated timber.
B. Technical specification of the treating materials using and other technical
information regarding the treating methed should be attached the tender.
C. Timber should be treated by vacuum pressure impregnation technique with
following specification.
i. Preservation are forced into the timber using a pressure of 200psi which
penetrate deep in to the wood & gent fixed inside the wood cells.
ii. Preservatives do not get washed/leached off after treatment.
iii. Pleasant appearance.
iv. clean to handle.
v. Odorless.
vi. Preservatives used are harmless to humans, animals & plant life.
vii. Easy to paint, polish & glue.
D. Timber transport by the client.
E. All timber are Micro timber.
Supplying and roofing with Corrugated asbestos roofing sheets on class 1 or
above timber frame consist of 100mmx50mm rafters (maximum spacing 0.9m)
and 50mmx50mm bearers with maximum spacing of 1200mm centre to centre.
K-01 Each asbestos sheet should be supported by three bearers and should be fixed to m² 2,362.00
each bearer in two positions using J-bolts. Rate shall include treating timber with
approved quality wood preservative. (Quality of timber and asbestos sheets
should be approved by the engineer).
Supplying and roofing with Corrugated asbestos roofing sheets on imported
treated timber consist of 100mmx50mm rafters (maximum spacing 0.9m) and
50mmx50mm bearers with maximum spacing of 1200mm centre to centre. Each
K-02 asbestos sheet should be supported by three bearers and should be fixed to each m² 3,037.00
bearer in two positions using J-bolts. Rate shall include treating timber with
approved quality wood preservative. (Quality of timber and asbestos sheets
should be approved by the engineer).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on class 1 or above timber frame consist of 100mmx50mm
K-12 m² 2,118.00
purling with maximum spacing of 1200mm centre to centre. ( Quality of timber
and Brand, Profile and Colour of the sheets should be approved by the engineer).
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on class 1 or above timber frame consist of 150mmx75mm
K-13 m² 2,356.00
purling with maximum spacing of 1500mm centre to centre. ( Quality of timber
and Brand, Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 100x50x2mm galvanized lip panel frame work with all
K-14 m² 2,556.00
specials (Brand, Profile and Colour of the sheets should be approved by the
engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 50x50x5.8mm angle iron frame work with all specials. Rate
K-15 m² 2,489.00
shall include applying two coats of anticorrosive paint to all steel work. (Brand,
Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
roofing sheets on 62.5x62.5x5.8mm angle iron frame work with all specials.
K-16 m² 2,869.00
Rate shall include applying two coats of anticorrosive paint to all steel work.
(Brand, Profile and Colour of the sheets should be approved by the engineer).
Supplying and roofing with 0.47mm thick colour coated Zink Aluminum metal
K-17 roofing sheets on existing frame work with all specials (Brand, Profile and m² 1,476.00
Colour of the sheets should be approved by the engineer).
Supplying and laying approved quality double side 3 -4mm thick Aluminum
K-18 Foil and 3"x3" mesh(Gauge 17) with necessary fasteners, etc.as directed ( m² 371.00
Quality of foil and mesh should be approved by the engineer).
Supplying and laying approved quality double side 3-4 mm thick Aluminum
K-19 Foil without mesh and with necessary fasteners, etc.as directed ( Quality m² 214.00
of foil should be approved by the engineer).
Supplying and roofing with approved quality Calicut Pattern Tiles on class 1
timber frame work consist of 100x50mm rafters and 50x25mm reapers and
K-20 m² 3,876.00
treating timber with approved quality wood preservative ( Quality of timber and
tiles should be approved by the engineer).
Supplying and roofing with Calicut pattern tiles on timber frame work using
K-21 available tiles and timber including treating timber with approved quality wood m² 857.00
preservative.
Supplying, fabricating and fixing 50x50x5.8 mm double angle iron rafters using
12mm bolt and nut including applying 2 coats of anticorrosive paint. Rate shall
K-22 m 1,824.00
include necessary cleats for fixing purling and anchor rods, concrete and
formwork required for fixing to walls as directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 75x75x5.8 mm double angle iron rafters using
12mm bolt and nut including applying 2 coats of anticorrosive paint. Rate shall
K-24 m 3,323.00
include necessary cleats for fixing purling and anchor rods, concrete and
formwork required for fixing to walls as directed.
Supplying, fabricating and fixing Steel Roof Truss of 20'-0" span using 50x50x5.8
mm angle iron as per detailed drawing no. 01 including applying 2 coats of
K-25 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 54,881.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Truss of 25'-0" span using 50x50x5.8
mm angle iron as per detailed drawing no. 02 including applying 2 coats of
K-26 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 70,250.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Truss of 30'-0" span using
62.5x62.5x5.8 mm angle iron as per detailed drawing no. 03 including applying 2
K-27 coats of anticorrosive paint to all steel work. Rate shall include necessary cleats nr 99,565.00
for fixing purling and anchor bolts, pressure plates and truss plates as directed by
the engineer.
Supplying, fabricating and fixing Steel Roof Truss of 40'-0" span using 75x75x5.8
mm angle iron as per detailed drawing 04 including no. 04 applying 2 coats of
K-28 anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing nr 159,529.00
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 300mm wide using
50x50x5.8 mm double angle iron main bars and 50x50 x5.8 mm angle iron
distribution bars as per detailed drawing. including applying 2 coats of
K-29 m 8,694.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 450mm wide using
50x50x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing no. 05 including applying 2 coats of
K-30 m 9,705.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 600mm wide using
62.5x62.5x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing no. 06 including applying 2 coats of
K-31 m 11,690.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
Supplying, fabricating and fixing Steel Roof Web Truss of 900mm wide using
75x75x5.8 mm double angle iron main bars and 50x50x5.8 mm angle iron
distribution bars as per detailed drawing including applying 2 coats of
K-32 m 13,146.00
anticorrosive paint to all steel work. Rate shall include necessary cleats for fixing
purling and anchor bolts, pressure plates and truss plates as directed by the
engineer.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 0.47mm thick Zink Aluminum ridge capping of girth
K-33 470mm to match the colour of the roof. Rate shall include all necessary fasteners, m 1,233.00
etc.
Supplying and fixing Ridging "v"shape with asbestos cement close fitting
K-34 m 862.00
ridges with necessary bolts, etc.
Supplying and fixing Ridging with asbestos cement close fitting ridges with
K-34A m 1,610.00
necessary bolts, etc.
Ridging with approved quality ridge tiles including bedded in 1:1:4 cement, lime,
K-35 m 614.00
sand mortar coloured to match tiles.
Ridging with approved quality ASA ridges including ridge end cap for coners and
K-35A m 1,348.00
ridge fix to roof by water proof cap with self taping screws.
Ridging with available ridge tiles including bedded in 1:1:4 cement, lime, sand
K-36 m 397.00
mortar coloured to match tiles.
K-37 Supplying approved quality Calicut pattern tiles to the site. nr 105.00
K-38 Supplying and laying approved quality Calicut pattern tiles as directed. nr 119.00
K-41 Laying Calicut pattern tiles in any building with available tiles at site. m² 90.00
The dimensions indicated in the description are the finished sized of timber
Note
members and only ±5% deviation can be allowed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing Flat asbestos ceiling with Imported timber or above timber
framework consists of 100x50mm joists at 1200mm centers and 50x50mm
bearers at 600mm centers including 38mmx12mm beadings and 38x38mm
moldings of class11 timber. Rate shall include treating all timber work using
L-03A m² 4,402.00
approved quality wood preservatives, applying one coat of primer and 2 coats of
emulsion paint to asbestos sheets and two coats of enamel paint to beadings and
moldings. (Quality of timber, asbestos sheets, beadings and moldings should be
approved by the engineer)
Supplying and fixing Flat asbestos eave ceiling with class 1or above timber
framework consists of 50x50mm bearers at 600mm centers including
38mmx12mm beadings and 38x38mm moldings of class 1I timber. Rate shall
L-04 include treating all timber work using approved quality wood preservatives, m² 3,212.00
applying one coat of primer and 2 coats of emulsion paint to asbestos sheets and
two coats of enamel paint to beadings and moldings (Quality of timber, asbestos
sheets, beadings and moldings should be approved by the engineer)
Supplying and fixing Flat asbestos eave ceiling with Imported timber or above
timber framework consists of 50x50mm bearers at 600mm centers including
38mmx12mm beadings and 38x38mm moldings of class 1I timber. Rate shall
L-04A include treating all timber work using approved quality wood preservatives, m² 3,560.00
applying one coat of primer and 2 coats of emulsion paint to asbestos sheets and
two coats of enamel paint to beadings and moldings (Quality of timber, asbestos
sheets, beadings and moldings should be approved by the engineer)
Supplying and fixing PVC (W 250mm x H 7.5mm) Flat or Angle ceiling including
frame work.(Average height of the roof 3600mm). The frame of the ceiling is
fabricated using 40mm GI channels (T 0.4mm/ H17mm/ W 45mm) with a 600mm
distance horizontally. The frame is also fixed to the roof purling vertically using
L-04B m² 3,544.00
same GI channels. Reverts are used to fix the ceiling panels and other related
accessories (reverts, screws, concrete nails, silicon gum,etc,) such as moldings,PVC
Corners(U /H/ L) (Quality of PVC ceiling sheet , Moldings, Placing hangers and GI
Channel should be approved by the enginner.)
Supplying and fixing 12 mm thick plywood ceiling with class 1 or above timber
framework consists of 100x50 mm joints at 1200mm centers and 50x50mm
L-05 bearers at 600mm centers including 38x12mm beading 38x38mm moldings of m² 3,363.00
class1I timber. Rate shall include treating all timber work using approved quality
wood preservatives, (Painting on plywood sheet will be paid separately)
Supplying and fixing Lunumidella timber ceiling with class 1 or above timber
framework consists of 100x50 mm joints at 1200mm centers and 50x50mm
bearers at 600mm centers including 38x38mm moldings of class I1 timber. Rate
L-06 m² 4,352.00
shall include treating all timber work using approved quality wood preservatives,
applying one coat of approved quality wood primer and 2 coats of polyurethane
varnish to new lunumdella wood after preparing surface as directed
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in special class timber with 100x75mm frame in
special class timber complete with brass or equivalent approved quality
L-07 m² 15,023.00
furniture including one coat of wood primer and two coats of enamel painting to
wood work. ( Type and brand of door lock to be decided according to type of work
and to be paid separately)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in special class timber to existing frame complete
L-08 with brass or equivalent approved quality furniture including one coat of wood m² 9,709.00
primer and two coats of enamel painting to wood work. ( Type and brand of door
lock to be decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick ledged, braced and battened door sash with
grooved and tongued joints in class 1 timber to existing frame complete with
L-09 brass or equivalent approved quality furniture including one coat of wood primer m² 8,855.00
and two coats of enamel painting to wood work. ( Type and brand of door lock to
be decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber with
100x75mm frame in special class timber complete with brass or equivalent
L-10 approved quality furniture including one coat of wood primer and two coats of m² 20,075.00
enamel painting to wood work. ( Type and brand of door lock to be decided
according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber with
100x75mm frame with top louvers in special class timber complete with brass
L-11 or equivalent approved quality furniture including one coat of wood primer and m² 21,770.00
two coats of enamel painting to wood work. ( Type and brand of door lock to be
decided according to type of work and to be paid separately)
Supplying and fixing 25mm thick paneled door sash in special class timber to
existing frame complete with brass or equivalent approved quality furniture
L-12 including one coat of wood primer and two coats of enamel painting to wood m² 15,125.00
work. (type and brand of door lock to be decided according to type of work and to
be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash with
100x75mm frame in special class timber complete with brass or equivalent
L-13 approved quality furniture including one coat of wood primer and two coats of m² 10,723.00
enamel painting to wood work. ( Type and brand of door lock to be decided
according to type of work and to be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash with
100x75mm frame with top louvers in special class timber complete with brass
L-14 or equivalent approved quality furniture including one coat of wood primer and m² 12,427.00
two coats of enamel painting to wood work. ( Type and brand of door lock to be
decided according to type of work and to be paid separately)
Supplying and fixing 31mm thick approved quality plywood door sash to
existing frame in special class timber complete with brass or equivalent approved
L-15 quality furniture including one coat of wood primer and two coats of enamel m² 6,723.00
painting to wood work. ( Type and brand of door lock to be decided according to
type of work and to be paid separately)
Supplying and fixing approved quality P.V.C. door with frame with all necessary
L-16 m² 7,022.00
fittings and lock as directed (Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber with 100x75mm frame in special class timber
L-17 complete with brass or equivalent approved quality furniture, casement fasteners, m² 21,001.00
casement stays, window ring, etc including one coat of wood primer and two
coats of enamel painting to wood work.
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber with 100x75mm frame with top louvers in
L-18 special class timber complete with brass or equivalent approved quality m² 22,973.00
furniture, casement fasteners, casement stays, window ring, etc including one
coat of wood primer and two coats of enamel painting to wood work.
Supplying and fixing 25mm thick timber paneled and 3mm thick glazed
window in special class timber to existing frame in special class timber
L-19 complete with brass or equivalent approved quality furniture, casement fasteners, m² 15,150.00
casement stays, window ring, etc including one coat of wood primer and two
coats of enamel painting to wood work.
Supplying and fixing 100x75mm door or widow frame in special class timber
L-20 m 2,470.00
including one coat of wood primer and two coats of enamel painting to wood work
RATE FOR
ITEM DESCRIPTION UNIT
2019
M - BRASS FOUNDER
M-01 Supplying and fixing approved quality night latch (Grade II) lock as directed nr 1,590.00
Fixing front door type lock as directed ( Cost of supplying the lock is not included
M-02 nr 1,296.00
to the rate and should be paid separately as per client's requirement)
Supplying approved quality door lock as per given specifications. Door lock should
M-03 be approved by the engineer and minimum market price should be Rs.1,000/= ( nr 1,200.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-04 be approved by the engineer and minimum market price should be Rs.1,500/= ( nr 1,800.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-05 be approved by the engineer and minimum market price should be Rs.2,000/= ( nr 2,400.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-06 be approved by the engineer and minimum market price should be Rs.2,500/= ( nr 3,000.00
Fixing of door lock should be paid separately)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying approved quality door lock as per given specifications. Door lock should
M-07 be approved by the engineer and minimum market price should be Rs.3,000/= ( nr 3,600.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-08 be approved by the engineer and minimum market price should be Rs.3,500/= ( nr 4,200.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
be approved by the engineer and minimum market price should be Rs.4,000/= (
M-09 nr 4,800.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-10 be approved by the engineer and minimum market price should be Rs.4,500/= ( nr 5,400.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-11 be approved by the engineer and minimum market price should be Rs.5,000/= ( nr 6,000.00
Fixing of door lock should be paid separately)
Supplying approved quality door lock as per given specifications. Door lock should
M-11A be approved by the engineer and minimum market price should be Rs6,000/= ( nr 7,200.00
Fixing of door lock should be paid separately)
Supplying and fixing brass or equivalent approved quality 50mm barrel bolt
M-12 nr 489.00
directed
Supplying and fixing brass or equivalent approved quality 100mm barrel bolt
M-13 nr 527.00
directed
Supplying and fixing brass or equivalent approved quality 150mm barrel bolt
M-14 nr 801.00
directed
Supplying and fixing heavy quality brass or equivalent approved quality
M-15 nr 854.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality brass or equivalent approved quality
M-16 nr 1,010.00
150x100mm butt hinges as directed
Supplying and fixing oxidized brass or equivalent approved quality Casement
M-17 nr 600.00
Fasteners with mortise plate as directed
Supplying and fixing oxidized brass or equivalent approved quality 250mm
M-18 nr 523.00
Casement Stays as directed
Supplying and fixing heavy quality oxidized brass or equivalent approved quality
M-19 nr 750.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality oxidized brass or equivalent approved quality
M-20 nr 958.00
150x100mm butt hinges as directed
Supplying and fixing copper or equivalent approved quality 50mm barrel bolt
M-21 nr 381.00
directed
Supplying and fixing stainless steel or equivalent approved quality 50mm barrel
M-21A nr 464.00
bolt directed
Supplying and fixing copper or equivalent approved quality 100mm barrel bolt
M-22 nr 438.00
directed
Supplying and fixing copper or equivalent approved quality 150mm barrel bolt
M-23 nr 576.00
directed
RATE FOR
ITEM DESCRIPTION UNIT
2019
N - IRON MONGER
Supplying and fixing 50x50mm G.I. weld mesh (gauge 10) to existing frame using
50x12mm class I timber beadings as directed and applying two coats of enamel
N-01 m² 2,996.00
paint to timber beadings and one coat of anticorrosive paint and two coats of
enamel paint to weld mesh
Supplying and fixing 50x50mm G.I. weld mesh (gauge 10) to 100x75mm class I
timber frame using 50x12mm class I timber beadings as directed and applying
N-02 m² 8,003.00
two coats of enamel paint to all wood work and one coat of anticorrosive paint
and two coats of enamel paint to weld mesh
Fabricating and fixing Diamond Shaped Iron Grill using 6 mm diameter M.S. bars
at 75mm c/c and 70 degree angle to form 75x150mm diamond shaped grill with
N-03 12x5mm flat iron frame work. Rate shall include necessary concrete for m² 4,330.00
installation and applying one coat of anticorrosive paint and two coats of enamel
paint
Fabricating and fixing Diamond Shaped Iron Grill using 6 mm diameter M.S. bars
at 75mm c/c and 70 degree angle to form 75x150mm diamond shaped grill with
N-04 25x25x5(+/-1mm)mm angle iron frame work. Rate shall include necessary m² 4,893.00
concrete for installation and applying one coat of anticorrosive paint and two
coats of enamel paint
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 25x25x5 mm "L" angle lower part up to 1000mm, covered with 0.47
Zn.Alluminium sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper
part consist with diamond shaped iron grill using 5.5mm diameter mild steel rods
N-05 m² 10,123.00
at 75mm C/C and 70 degree to horizontal . Rate should be included lock
arrangement for padlock, hinges & necessary concrete for fixing frame to the wall
for six places. Applying one coat of anticorrosive paint to all steel and two coat of
enamel paint.
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 25x25x5 mm "L" angle lower part up to 1000mm, covered with 18 gage GI
sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper part consist with
N-05A diamond shaped iron grill using 5.5mm diameter mild steel rods at 75mm C/C and m² 10,753.00
70 degree to horizontal . Rate should be included lock arrangement for padlock,
hinges & necessary concrete for fixing frame to the wall for six places. Applying
one coat of anticorrosive paint to all steel and two coat of enamel paint.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Fabricating and fixing steel door frame using 37x37x5.8mm "L" angle and sash
using 0.4mm thick 25x25mm box bar lower part up to 1000mm, covered with
18 gage GI sash on 12x5 mm flat iron at 300mm C/C in both ways. Upper part
consist with diamond shaped iron grill using 5.5mm diameter mild steel rods at
N-05B m² 10,008.00
75mm C/C and 70 degree to horizontal . Rate should be included lock
arrangement for padlock, hinges & necessary concrete for fixing frame to the wall
for six places. Applying one coat of anticorrosive paint to all steel and two coat of
enamel paint.
Fabricating and fixing 6mm dia. 75mm long mild steel rod (as hook) to drill hole
on 25x5mm plat iron at 200mm c/c and weld the hook on both side of plat iron.
N-06 nr 1,555.00
Rate shall include necessary concrete for fixing to the wall and applying one coat
of anticorrosive paint and two coat of enamel paint.
Supplying and fixing 16mm mild steel bars for windows as directed including
N-07 m 413.00
applying one coat of anticorrosive paint and two coats of enamel paint
Supplying and fixing 20mm mild steel bars for windows as directed including
N-08 m 559.00
applying one coat of anticorrosive paint and two coats of enamel paint
N-09 Supplying and fixing 100x16mm rag bolts with all specials nr 404.00
N-10 Supplying and fixing 100mm safety type Hasp and Staple as directed nr 360.00
N-11 Supplying and fixing 150mm safety type Hasp and Staple as directed nr 365.00
Supplying and fixing heavy quality oxidized iron or equivalent approved quality
N-12 nr 632.00
100x100mm butt hinges as directed
Supplying and fixing heavy quality oxidized iron or equivalent approved quality
N-13 nr 746.00
150x100mm butt hinges as directed
Class room Lock -Supplying and fixing 225mm long safety type Barrel bolt with
N-14 Hasp and Staple stainless steel, specially made complete.as directed. Rate shall nr 2,343.00
include 50mm pad lock.
Fabricating and fixing Iron grill using 12mm diameter M.S. bars at 100mm c/c and
vertical to form with 38 x 5mm fiat iron frame welded to 300mm horizontally
N-15 work as per given instruction by Engineer. Rate shall include necessary fixing wall m² 6,737.00
plug and screws for installation and applying one coat of anticorrosive paint and
two coats of enamel paint
RATE FOR
ITEM DESCRIPTION UNIT
2019
P - ALUMINIUM WORKER
All aluminium extrusions should have the following properties and the brand
should be approved by the Engineer
Alloy : AA 6063
Minimum Tensile Strength : 150 MPa
Minimum Elongation : 7%
Surface Treatments Note
(a) Powder coated
Coating Thickness : 60~80 micron
Colour : To be approved by the Architect/ Engineer
(b) Anodizing - Natural/ Bronze
Coating Thickness : 10~15 micron
If the Cladding and melamine board using for the Door or the Partition able
to issue with SSR.
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 70mm (1.6mm thick) aluminium single Swing
door - Partition door using approved quality natural anodized aluminum
P-40 extrusions with 5mm thick fixed glass on top, mid rail and bottom white board m² 13,925.00
(2.5-3.0 mm), as per detailed drawing no.15/11 including door lock, gaskets, wool
felt, beadings, flush bolt, threaded bar with nut roller, door handles, etc.
Supplying, fabricating and fixing 70mm (1.6mm thick) aluminum single Swing
door - Partition door using approved quality bronze anodized aluminum
extrusions with 5mm thick fixed glass on top, mid rail and bottom white board
P-41 m² 14,111.00
(2.5-3.0 mm),as per detailed drawing no.15/11 including door lock, floor
hinges,gaskets, wool felt, beadings, flush bolt, threaded bar with nut roller, door
handles, etc.
Supplying, fabricating and fixing 70mm (1.2mm thick) aluminium single swing
door / Partition door using approved quality powder coated aluminium
P-42 extrusions with 5mm thick fixed glass on top, mid rail and bottom white m² 15,172.00
board(2.5-3.0 mm), as per detailed drawing no.15/11 including door lock, gaskets,
wool felt, beadings, flush bolt, threaded bar with nut roller, door handles, etc.
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-46 with fixed glazed using approved quality natural anodized aluminium m² 13,548.00
extrusions with 5mm thick fixed glass as per detailed drawing no.15/17
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-47 with fixed glazed using approved quality bronze anodized aluminium m² 13,628.00
extrusions with 5mm thick fixed glass as per detailed drawing no.15/17
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-48 with fixed glazed using approved quality powder coated aluminium extrusions m² 14,304.00
with 5mm thick fixed glass as per detailed drawing no.15/17
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-49 with louvers using approved quality natural anodized aluminium extrusions as m² 19,005.00
per detailed drawing no.15/18
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-50 with louvers using approved quality bronze anodized aluminium extrusions as m² 19,518.00
per detailed drawing no.15/18
Supplying, fabricating and fixing Shop front (1.2mm thick) aluminium frame
P-51 with louvers using approved quality powder coated aluminium extrusions as m² 21,036.00
per detailed drawing no.15/18
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality natural anodized aluminium extrusions
P-59 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 10,632.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
beading, flush bolt, threaded bar with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality bronze anodized aluminium extrusions
P-60 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 10,726.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
flush bolt, threaded bar with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium single swing
door for Toilet using approved quality powder coated aluminium extrusions
P-61 with 4mm thick double side cladding board, as per detailed drawing no. 15/19, m² 11,361.00
including 2nos Alluminium barrel bolt door handle, gaskets,,butthinges, wool felt,
flush bolt, threaded panneled , with nut roller, etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium louvers door
using approved quality natural anodized aluminium extrusions, as per detailed
P-62 m² 19,163.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminum louvers door
using approved quality brownzd anodized aluminum extrusions, as per detailed
P-63 m² 19,467.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
Supplying, fabricating and fixing 80mm (1.6mm thick) aluminium louvers door
using approved quality powder coated aluminium extrusions, as per detailed
P-64 m² 21,520.00
drawing no. 15/20, gaskets, wool felt, flush bolt, beading threaded bar , with nut
roller,door handle etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Q - GLAZIER
Q-01 Supplying and fixing 5mm thick figured glass panes using class I timber beadings m² 3,646.00
Q-02 Supplying and fixing 3mm thick figured glass panes using class I timber beadings m² 2,637.00
Q-03 Supplying and fixing 5mm thick clear glass panes using class I timber beadings m² 3,078.00
Q-04 Supplying and fixing 3mm thick clear glass panes using class I timber beadings m² 2,570.00
Q-05 Supplying and fixing 5mm thick tinted glass panes using class I timber beadings m² 3,900.00
Q-06 Supplying and fixing 3mm thick tinted glass panes using class I timber beadings m² 2,824.00
R - PLASTERER
16mm thick semi rough plaster for walls in 1:1:5 cement lime sand mix finished
R-01 m² 707.00
using trowel
10mm thick semi rough plaster for concrete columns in 1:3 cement sand mix
R-02 m² 1,082.00
finished using trowel
16mm thick rough plaster for walls in 1:1:5 cement lime sand mix finished using
R-03 m² 700.00
sponge.
10mm thick rough plaster for concrete columns in 1:3 cement sand mix finished
R-04 m² 1,075.00
using sponge.
10mm thick rough plaster for Retaining walls in 1:3 cement sand mix finished
R-04A m³ 779.00
using sponge.
16mm thick smooth plaster for walls in 1:1:5 cement lime sand mix finished
R-05 m² 918.00
smooth with lime putty
10mm thick smooth plaster for concrete columns in 1:3 cement sand mix
R-06 m² 1,089.00
finished smooth with lime putty
10mm thick smooth soffit plaster for concrete slabs, beams and stair cases in 1:3
R-07 m² 1,089.00
cement sand mix finished smooth with lime putty
Repairing cracks in walls by plastering in 1:3 cement sand mix after chipping
R-08 m 296.00
100mm to 150mm width and installing a chicken mesh using concrete nails
25mm thick and 100mm ~ 150mm wide mortar bands over roof tiles in 1:1:4
R-09 m 247.00
cement, lime and sand mortar
12x100mm projected skirting in 1:3 cement sand mortar and finished smooth
R-10 m 482.00
with cement floating including forming groove
12x100mm projected skirting in 1:3 cement sand mortar and finished smooth
R-11 m 715.00
with red cement floating including forming groove
20mm thick plinth plaster in 1:3 cement sand mix finished smooth with cement
R-12 m² 927.00
floating
RATE FOR
ITEM DESCRIPTION UNIT
2019
20mm thick plinth plaster in 1:3 cement sand mix finished smooth with
R-13 m² 948.00
coloured cement floating
12mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-14 m² 699.00
cement floating
12mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-15 m² 721.00
coloured cement floating
12mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-16 m² 659.00
cement floating
12mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-17 m² 680.00
coloured cement floating
16mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-18 m² 730.00
cement floating
16mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-19 m² 817.00
coloured cement floating
16mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-20 m² 711.00
cement floating
16mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-21 m² 799.00
coloured cement floating
20mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-22 m² 988.00
cement floating
20mm thick cement rendering in 1:2 cement sand mortar finished smooth with
R-23 m² 1,008.00
coloured cement floating
20mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-24 m² 927.00
cement floating
20mm thick cement rendering in 1:3 cement sand mortar finished smooth with
R-25 m² 948.00
coloured cement floating
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-26 m 508.00
directed (0mm~ 100mm)
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27 m 653.00
directed (100mm~ 225mm)
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27A m 567.00
directed.Aluminium work for 115mm thick wall .
Preparing door or window reveals in 12mm thick 1:3 cement sand mortar as
R-27B m 1,035.00
directed.Aluminium work for 225mm thick wall .
20mm thick Black or Green Board plaster in 1:3 cement sand mix finished
R-28 smooth with Black or Green cement floating with 38mmx12mm cement m² 948.00
plaster boarder
Supplying and fixing 300mm wide gauge 20 chicken mesh with wire nails (Before
R-29 plastering for internal wall) the junction of concrete and Brick/Cement Block m 198.00
work or two dissimilar materials.
RATE FOR
ITEM DESCRIPTION UNIT
2019
S - PLUMBER
All PVC pipes and fittings shall be of best quality of an approved manufacture. All
pipes shall be measured in linear meters and rates shall include pipe fittings and
extras where stated, solder, rivets, screws, nails, clips, brackets, straps, holder
Note
bats, made bends, if any etc, all laps, straight cutting and wastages, solvent cement
and incidental materials and labour on joining pipes, chasing in brickwork,
concrete surface and making good.
S-01 Supplying and fixing 12mm (1/2") ball valve - Brass nr 1,239.00
S-02 Supplying and fixing 12mm (1/2") ball valve - PVC nr 425.00
S-03 Supplying and fixing 20mm (3/4") ball valve - Brass nr 1,629.00
S-04 Supplying and fixing 20mm (3/4") ball valve - PVC nr 415.00
S-05 Supplying and fixing 25mm (1") ball valve - Brass nr 1,787.00
S-06 Supplying and fixing 25mm (1") ball valve - PVC nr 509.00
S-07 Supplying and fixing 38mm (1 1/2") ball valve - Brass nr 3,526.00
S-08 Supplying and fixing 38mm (1 1/2") ball valve - PVC nr 776.00
S-09 Supplying and fixing 12mm (1/2") bib tap - Brass nr 884.00
Supplying and fixing 12mm (1/2") bib tap - Chromium plated.Prime Cost
S-10 nr 1,566.00
Rs.1,190.00 - 1,300.00
S-11 Supplying and fixing 12mm (1/2") conceal valve - Chromium plated nr 1,997.00
S-12 Supplying and fixing 12mm (1/2") bib tap - PVC nr 567.00
S-13 Supplying and fixing 12mm (1/2") gate valve - Brass nr 1,131.00
S-14 Supplying and fixing 12mm (1/2") gate valve - PVC nr 482.00
S-15 Supplying and fixing 20mm (3/4") gate valve - Brass nr 1,628.00
S-16 Supplying and fixing 20mm (3/4") gate valve - PVC nr 628.00
S-17 Supplying and fixing 25mm (1") gate valve - Brass nr 1,882.00
S-18 Supplying and fixing 25mm (1") gate valve - PVC nr 779.00
S-19 Supplying and fixing 38mm (1 1/2") gate valve - Brass nr 2,777.00
S-20 Supplying and fixing 38mm (1 1/2") gate valve - PVC nr 913.00
Supplying and laying 20mm (1/2") (PNT11) PVC pipes with all specials rate
S-21 m 104.00
included presure testing etc.
Supplying and laying 25mm (3/4") (PNT11) PVC pipes with all specials rate
S-22 m 169.00
included presure testing etc.
Supplying and laying 32mm (1") (PNT11) PVC pipes with all specials rate
S-23 m 303.00
included presure testing etc.
Supplying and laying 32mm (1") (PNT9) PVC pipes with all specials rate included
S-24 m 277.00
presure testing etc.
Supplying and laying 40mm (1 1/4") (PNT11) PVC pipes with all specials rate
S-25 m 409.00
included presure testing etc.
Supplying and laying 40mm (1 1/4") (PNT9) PVC pipes with all specials rate
S-26 m 376.00
included presure testing etc.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying 50mm (1 1/2") (PNT11) PVC pipes with all specials rate
S-27 m 599.00
included presure testing etc.
Supplying and laying 50mm (1 1/2") (PNT9) PVC pipes with all specials rate
S-28 m 549.00
included presure testing etc.
Supplying and laying 50mm (1 1/2") (PNT7) PVC pipes with all specials rate
S-29 m 456.00
included presure testing etc.
Supplying and laying 63mm (2") (PNT11) PVC pipes with all specials rate
S-30 m 1,018.00
included presure testing etc.
Supplying and laying 63mm (2") (PNT9) PVC pipes with all specials rate included
S-31 m 928.00
presure testing etc.
Supplying and laying 63mm (2") (PNT7) PVC pipes with all specials rate included
S-32 m 746.00
presure testing etc.
Supplying and laying 75mm (2 1/2") (PNT9) PVC pipes with all specials rate
S-33 m 1,538.00
included presure testing etc.
Supplying and laying 75mm (2 1/2") (PNT7) PVC pipes with all specials rate
S-34 m 1,250.00
included presure testing etc.
Supplying and laying 90mm (3") (PNT9) PVC pipes with all specials rate included
S-35 m 1,747.00
presure testing etc.
Supplying and laying 90mm (3") (PNT7) PVC pipes with all specials rate included
S-36 m 1,322.00
presure testing etc.
Supplying and laying 110mm (4") (PNT9) PVC pipes with all specials rate
S-37 m 2,548.00
included presure testing etc.
Supplying and laying 110mm (4") (PNT7) PVC pipes with all specials rate
S-38 m 2,016.00
included presure testing etc.
Water tap post concrete in 1:2:4 (20), 750mm height from ground and 450mm
deep, 100mmx100mm at top size and 150mmx150mm size at ground level with 4
no of 5.5mm dia. M/S bars and link at150mm c/c . Rate shall include supplying
S-39 nr 4,615.00
and fixing T1000 12mm PVC pipe bib tap and concreting (1:3:6 concreting)
750mmx900mm size 75mm thick basing with suitable slope and 12mm thick 1:3
cement sand rendering.
RATE FOR
ITEM DESCRIPTION UNIT
2019
T - SANITARY FITTINGS
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9 liters capacity high level ceramic cistern
T-09 with PVC flush pipe, 12mm brass stop cock, water supply connection, etc. (Quality nr 9,627.00
should be approved by the engineer)
Supplying and fixing approved quality 9 liters capacity high level ceramic cistern
with PVC flush pipe, 12mm angle valve , water supply connection, etc.(Quality
T-09A nr 14,539.00
should be approved by the engineer)prime cost of,9 liters capacity high level
ceramic cistern (price range Rs. 7,000.00-Rs.9,500.00
Supplying and fixing approved quality 9 liters capacity high level PVC cistern with
T-10 PVC flush pipe, 12mm brass stop cock, water supply connection, etc. (Quality nr 9,625.00
should be approved by the engineer)
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
T-12 A to working order. Minimum 10 year warranty on ceramic ware to be available nr 21,068.00
with manufacturers. (Quality approved by the engineer)Prime cost of,ceramic
closed couple Rs12,500.00 - 13,500.00 (Excluding VAT)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
to working order. Minimum 10 year warranty on ceramic ware to be available
T-12 B with manufacturers. (Ideal Standard, American Standard, or equivalent quality nr 31,504.00
complying to British Standard approved by the engineer) prime cost of,ceramic
closed couple water closet american &british-Rs. 19,300.00 - 22,600.00
(Excluding VAT)
Supplying and fixing ceramic closed couple water closet (Commode) with seat
cover, bidet shower, trap,12mm chromium plated angle valve, flexible horse etc
to working order. Minimum 10 year warranty on ceramic ware to be available
T-12 C with manufacturers. (Ideal Standard, American Standard, or equivalent nr 46,100.00
quality complying to British Standard approved by the engineer) Prime cost
of,ceramic closed couple water closet american &british-Rs. 30,700.00 -
35,600.00 (Excluding VAT)
Supplying and fixing approved quality 9 liters capacity low level ceramic cistern
T-13 with PVC flush pipe, 12mm pvc angle valve, flexible horse, water supply nr 9,852.00
connection, etc. (Quality should be approved by the engineer)
Supplying and fixing approved quality 9 liters capacity low level ceramic cistern
with PVC flush pipe,12mm(1/2") angle valve - chromium plated , pvc flexible
T-13A horse, water supply connection, etc. (Quality should be approved by the engineer) nr 14,484.00
prime cost of,9 liters capacity low level ceramic cistern -Rs. 6,900.00 - 7,400.00
(Excluding VAT)
Supplying and fixing approved quality 9 liters capacity low level PVC cistern with
T-14 PVC flush pipe,12mm pvc angle valve, flexible horse water supply connection, etc. nr 9,061.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality 40mm Bottle Trap as directed (Quality
T-16 nr 1,462.00
should be approved by the engineer)
Supplying and fixing approved quality Chromium plated Bidet shower with
T-17 12mm(1/2") angle valve - cromium plated as directed Bidet shower price nr 3,904.00
should be over Rs.1400.00 and approved by the engineer (Excluding VAT)
Supplying and fixing approved quality PVC Bidet shower with 12mm(1/2")
T-17 B nr 2,980.00
cromium plated angle valve as directed (Approved by the engineer)
Supplying and fixing approved quality PVC seat cover as directed (Quality should
T-18 nr 1,487.00
be approved by the engineer)
Supplying and fixing approved quality Chromium Plated Soap Tray as directed
T-20 nr 1,298.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic Soap Tray as directed (Quality
T-21 nr 1,194.00
should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality Chromium Plated Tooth Brush Holder as
T-22 nr 1,308.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic Tooth Brush Holder as directed
T-23 nr 1,598.00
(Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-24 nr 2,309.00
Rose as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-24B nr 9,871.00
Rose and bar (English) as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-25 Rose and bar with conceal valve (Normal) as directed (Quality should be nr 4,047.00
approved by the engineer)
Supplying and fixing approved quality Chromium Plated 100 mm dia. Shower
T-25B Rose and bar with conceal valve (English) as directed (Quality should be nr 13,033.00
approved by the engineer)
Supplying and fixing approved quality PVC 100 mm dia. Shower Rose as
T-26 nr 674.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated Toilet Paper Holdr
T-27B nr 3,469.00
(English) as directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Chromium Plated 600mm Towel Rail as
T-29 nr 3,250.00
directed (Quality should be approved by the engineer)
Supplying and fixing approved quality Ceramic 600mm Towel Rail as directed
T-30 nr 2,882.00
(Quality should be approved by the engineer)
U - ROOF PLUMBER
Supplying and fixing approved quality 150x100 mm PVC square type eave
U-01 m 779.00
gutters with brackets at 300mm centers, running heads, end caps, etc as directed
Supplying and fixing approved quality 87.5 mm dia. PVC down pipes with PVC
U-02 m 541.00
clips at 1000mm centers and all specials as directed
Supplying and fixing approve quality 200mmx200x87.5mm PVC gutter box with
U-03 nr 1,215.00
all specials as directed
Supplying and fixing 0.47 mm thick Zink Aluminum rainwater eave gutters of
U-04 girth 450~700mm as directed. Rate shall include lap lengths, gutter brackets, m 1,286.00
endplates, expansion joints, etc
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing 100x100mm Zink Aluminum colour coated down pipes as
U-05 m 1,048.00
directed. Rate shall include all necessary nozzles, offsets, bends, clips,etc
Supplying and fixing 150x150mm Zink Aluminum colour coated down pipes as
U-06 m 1,405.00
directed. Rate shall include all necessary nozzles, offsets, bends, clips,etc
Supplying and fixing 300x300mm gutter boxes in Zink Aluminum colour coated
U-07 nr 1,116.00
metal sheets including necessary fittings
Supplying and fixing 0.47 mm thick & 225 mm wide colour coated Zink
Aluminum metal sheets on valance boards , barge boards or fascia. (Quality
U-08 and colour should be approved by the engineer) rate to include 200mm - 225 mm m 819.00
long bracket fixed to roof of 25mmx5mm section flat iron, painting with two coats
of anti corrosive paint etc.
V - TINKER
Supplying and fixing 0.47mm Zn/Al sheet 450mm wide flashing fixed with
V-01 150mm turned up along and top edge tucked well into wall in cement and lime m 1,420.00
mortar as directed
Valley gutters using 0.47mm Zn/Al sheet 900mm wide GI sheets by laying on
V-02 25mm thick class I timber boards and 25x25x4mm angle iron(both side), sheet m 7,432.00
tarred, joints soldered and cement lime filleting complete as directed
W - DRAIN LAYER
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and laying approved quality110mm (4") PVC PNT7 pipes on 150mm
W-05 thick 1:3:6(25m) concrete layer and covered with 1:3:6(25m) concrete with m 3,504.00
50mm minimum cover including excavation and backfilling
Supplying and laying approved quality110mm (4") PNT7 perforated PVC pipes on
W-06 300mm thick sand layer and covered with sand with 150mm minimum cover m 2,494.00
including excavation and backfilling
Supplying and fixing 37mm (1 1/2") dia. 1.5mm thick 2100mm high G.I vent pipe
W-07 nr 3,173.00
with copper wire dome.
W-08 Supplying and fixing approved quality drainage gully and grate PVC nr 1,240.00
Supplying and fixing approved quality drainage gully and grate Chromium
W-08B nr 1,566.00
platted
W-09 Supplying and fixing approved quality 40mm 4-way PVC floor trap nr 1,266.00
Replacing 100mm thick Cover Slab for 900 x 900mm Manhole in 1:2:4(20mm)
W-10 concrete reinforced with Y10@ 150mm c/c both ways. Rate shall include nr 4,362.00
reinforcement and necessary formwork.
Replacing 100mm thick Cover Slab for 750 x 750mm Manhole in 1:2:4(20mm)
W-11 concrete reinforced with Y10@ 150mm c/c both ways. Rate shall include nr 3,460.00
reinforcement and necessary formwork.
RATE FOR
ITEM DESCRIPTION UNIT
2019
X-02 Applying two coats of snowcem to walls after preparing surface as directed m² 332.00
Applying one coat of approved quality wall primer and two coats of approved
quality emulsion paint to old walls with minor damages after patching up
X-03 m² 669.00
cracks , applying wall putty and sand papering, applying plaster of Paris and
preparing surface as directed
Applying two coats of approved quality emulsion paint to old walls with minor
X-04 damages after patching up cracks , applying lime putty and sand papering, m² 579.00
applying plaster of Paris and preparing surface as directed
Applying one coat of approved quality emulsion paint to old work without wall
X-05 m² 208.00
preparation
Applying one coat of approved quality weather shield paint to old work without
X-06 m² 343.00
wall preparation
Applying one coat of approved quality wall primer and two coats of approved
quality emulsion paint to old walls with major damages after patching up
X-07 m² 755.00
cracks, applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality emulsion paint to old walls with major
X-08 damages after patching up cracks, applying lime putty and sand papering, m² 669.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-09 m² 549.00
quality emulsion paint to new walls.
Applying one coat of approved quality wall primer and two coats of approved
quality weather shield paint to old walls with minor damages after patching up
X-10 m² 670.00
cracks , applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality weather shield paint to old walls with
X-11 minor damages after patching up cracks , applying lime putty and sand papering, m² 584.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
quality weather shield paint to old walls with major damages after patching up
X-12 m² 779.00
cracks, applying lime putty and sand papering, applying plaster of Paris and
preparing surface as directed.
Applying two coats of approved quality weather shield paint to old walls with
X-13 major damages after patching up cracks, applying lime putty and sand papering, m² 693.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-14 m² 573.00
quality weather shield paint to new walls.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Applying one coat of approved quality wall primer and two coats of approved
quality enamel paint to old walls with minor damages after patching up cracks ,
X-15 m² 688.00
applying lime putty and sand papering, applying plaster of Paris and preparing
surface as directed.
Applying one two coats of approved quality enamel paint to old walls with
X-16 minor damages after patching up cracks , applying lime putty and sand papering, m² 603.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
quality enamel paint to old walls with major damages after patching up cracks,
X-17 m² 797.00
applying lime putty and sand papering, applying plaster of Paris and preparing
surface as directed.
Applying two coats of approved quality enamel paint to old walls with major
X-18 damages after patching up cracks, applying lime putty and sand papering, m² 711.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer and two coats of approved
X-19 quality enamel paint to new walls after applying lime putty and sand papering, m² 640.00
applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-20 m² 675.00
quality enamel paint to old wood work after preparing surface as directed.
Applying two coats of approved quality enamel paint to old wood work after
X-21 m² 555.00
preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-22 m² 717.00
quality enamel paint to new wood work after preparing surface as directed.
Applying one coat of approved quality wood primer and two coats of approved
X-23 quality polyurethane varnish to old wood work after preparing surface as m² 657.00
directed.
Applying two coats of approved quality anti corrosive paint to steel work after
X-26 m² 404.00
preparing surface as directed.
Applying one coat of approved quality anti corrosive paint and two coats of
X-27 m² 554.00
approved quality enamel paint to steel work after preparing surface as directed.
Applying one coat of approved quality floor paint after preparing surface as
X-28 m² 233.00
directed.
Applying two coats of approved quality floor paint after preparing surface as
X-29 m² 383.00
directed.
RATE FOR
ITEM DESCRIPTION UNIT
2019
Applying one coat of approved quality floor polish to floor and smoothing using a
X-30 m² 226.00
polisher after preparing surface as directed.
Applying two coats of approved quality emulsion paint to old ceiling with sand
X-31 m² 622.00
papering, applying plaster of Paris and preparing surface as directed.
Applying one coat of approved quality wall primer to walls, applying lime putty
X-32 m² 114.00
and sand papering, applying plaster of Paris and preparing surface as directed
Applying two coats of approved quality Roofing paint to new Roof work after
X-33 m² 316.00
preparing surface as directed.
Applying one coat of roof primer & two coats of approved quality Roofing paint
X-33A m² 675.00
for old Roof work after preparing surface as directed.
Apply two coat of wall potty on internal rough plaster to get smooth finish (rate
X-34 m² 527.00
for the rough plaster shall be measured separately)
Y - ELECTRICAL INSTALLATION
Note: Length of 15 m wire has been included for each item. If exceed the
length, additional length shall be included separately
Supplying and fixing approved quality lamp point wired through a 5 Amp switch
using 2x1/1.13mm Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits
Y-01 with all specials. surface plastic casing can be use with approved condition by the nr 3,331.00
engineer. Rate shall include switch, sun box, ceiling rose, round block, holder etc.
(Quality should be approved by the engineer) bulb will be paid seperately
Supplying and fixing approved quality Weather proofed lamp Fitting (Out
Door) with point wired through 5 Amp switch using 2x1/1.13mm Cu\PVC\PVC
(1sq.mm) wire and 7/0.67 mm Cu/PVC (2.5sq.mm) earth wires in fully concealed
Y-02 PVC conduits with all specials. surface plastic casing can be use with approved nr 5,465.00
condition. Rate shall include switch, sun box, complete lamp fitting, etc (Quality
should be approved by the engineer) bulb will be paid seperately. Prime cost of
Fitting (excluding VAT)= R.s.1,300.00 - 1,500.00
Supplying and fixing approved quality Wall bracket lamp Fitting (In door) with
point wired through a 5 Amp switch using 2x1/1.13mm Cu\PVC\PVC (1sq.mm)
wires in fully concealed PVC conduits with all specials. surface plastic casing
Y-03 nr 8,221.00
can be use with approved condition. Rate shall include switch, sun box, etc
(Quality should be approved by the engineer) bulb will be paid seperately.
Prime cost of Fitting (excluding VAT)= R.s.3,500.00 - 4,000.00
Supplying and fixing approved quality 6W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-04 surface plastic casing can be use with approved condition. Rate shall include nr 3,758.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-05 surface plastic casing can be use with approved condition. Rate shall include nr 4,075.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 12W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-06 surface plastic casing can be use with approved condition. Rate shall include nr 4,180.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 15W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-07 surface plastic casing can be use with approved condition. Rate shall include nr 4,390.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 18W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-08 surface plastic casing can be use with approved condition. Rate shall include nr 4,496.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 24W Ceiling mounted L.E.D Panel lamp
(Sunk or Surface mounted) wired through a 5 Amp switch using 2x1/1.13mm
Cu\PVC\PVC (1sq.mm) wires in fully concealed PVC conduits with all specials.
Y-09 surface plastic casing can be use with approved condition. Rate shall include nr 5,602.00
Wires, Conduites, switch, sun box, etc L.E.D Lamp Life Span 25000hrs or more
with 2 Year Warranty for Complete Product.Without any Complaints of ROHS.
(Quality should be approved by the engineer)
Supplying and fixing approved quality 1400mm sweep ceiling fan with fan
regulator & On/Off by 01 Gang Switch wired through 2x1/1.13mm Cu\PVC\PVC
(1sq.mm) wires and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully
concealed PVC conduits with all specials. surface plastic casing can be use
with approved condition. Ceiling fan Should be following Specification.Power
Consumption (60W-80W)
Y-10 SLS 814 Compliance nr 13,646.00
02 Year company Warranty
Power cut-off Safety Switch
Safety Wired for Fan Motor from Rod
Hum free Condenser Type Controller
(Quality should be approved by the engineer)
Prime cost of Fan (excluding VAT)= R.s.7,500.00 - 8000.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 300x300mm Exhaust fan with Square Pin
type - G /13 Amp socket outlet wired through 7/0.67mm Cu\PVC\PVC(T)-
2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully concealed
PVC conduits with all specials. surface plastic casing can be use with approved
condition.
Y-11 Exhaust fan Should be following Specification nr 14,256.00
02 Year company Warranty
Front Side louver protection
Back Side Automatic Shutter
(Quality should be approved by the engineer)
Prime cost of Fan (excluding VAT)= R.s 7,500.00 - 8000.00
Supplying and fixing approved quality Wall mounted fan with in-built regulator
and Square Pin type - G /13 Amp socket outlet wired through 7/0.67mm
Cu\PVC\PVC(T)-2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire
in fully concealed PVC conduits with all specials. surface plastic casing can be
use with approved condition.Power Consumption (50W-60W)
Wall-fan Should be following Specification
Y-12 nr 17,164.00
02 Year company Warranty
Oscillation control
Metal Blade
3 Speed and on/Off pull switch
(Quality should be approved by the engineer)
Prime cost of Fan (excluding VAT) = R.s. 11,000.00 - 12,200.00
Supplying and fixing approved quality 5 Amp socket outlet wired through
2x1/1.13mm Cu\PVC\PVC (1sq.mm) wires and 1x7/0.67mm Cu\PVC (2.5sq.mm)
Y-13 earth wire in fully concealed PVC conduits with all specials. surface plastic nr Deleted
casing can be use with approved condition. (Quality should be approved by the
engineer)
Supplying and fixing approved quality Square Pin type - G /13 Amp socket
outlet wired through 7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm wire and
Y-14 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire in fully concealed PVC conduits with nr 4,494.00
all specials. surface plastic casing can be use with approved condition.
(Quality should be approved by the engineer)
Supplying and fixing approved quality Square Pin type - G/13 Amp socket
outlet (for the ring circuit or radial circuit) wired through 7/0.67mm
Cu\PVC\PVC(T) - 2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm) earth wire
Y-14A nr 892.00
in fully concealed PVC conduits with all specials. surface plastic casing can be
use with approved condition. supply cables & concealing materials will be paid
separately. (Quality should be approved by the engineer)
Supplying and fixing approved quality 15 Amp socket outlet wired through
7/0.67mm Cu\PVC\PVC(T)-2.5sq.mm wire and 1x7/0.67mm Cu\PVC (2.5sq.mm)
Y-15 earth wire in fully concealed PVC conduits or surface plastic casing and capping as nr Deleted
directed. supply cables & concealing materials will be paid separately (Quality
should be approved by the engineer)
Supplying and fixing of approved quality 40 Amp single phase main switch
Y-16 nr 1,782.00
(10kA B.C) to working order (Quality should be approved by the engineer)
Supplying and fixing of approved quality 60 Amp single phase main switch
Y-17 nr 1,782.00
(10kA B.C) to working order (Quality should be approved by the engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing of approved quality 12 way 4 Row Wall mounted Steel
Distribution Board to working Order. Enclosure box size not less than 350mm x
Y-24A 700mm x 125mm and material should be Alu Zinc coated metal sheet with nr 15,669.00
poweder coated Texture (RAL7032) Surface finished. ICE 60529 (IP54) Standard
(Quality & Surface Type should be approved by the engineer)
Supplying and fixing of approved quality 6A,10A or 16A type"C"MCB (10kA B.C)
Y-25 nr 750.00
(Quality should be approved by the engineer)
Supplying and fixing of approved quality 20A,25A or 32A type "C"MCB (10kA
Y-26 nr 756.00
B.C)(Quality should be approved by the engineer)
Supplying and fixing approved quality 40 Amp/ 4 Pole three phase main switch
to working order (Quality should be approved by the engineer)
Y-27 nr 3,267.00
Product Should Be Europian or Equalent.
Prime Cost of Product (excluding VAT) -Rs 1,800.00 - 2,000.00
Supplying and fixing approved quality 63 Amp/ 4 Pole three phase main switch
to working order (Quality should be approved by the engineer)
Y-28 nr 3,345.00
Product Should Be Europian or Equalent.
Prime Cost of Product (excluding VAT) -Rs : 1,800.00 - 2,200.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 40 Amp/30mA three phase RCCB (Trip
Y-29 switch) to working order (Quality should be approved by the engineer) nr 6,307.00
Prime Cost of Product (excluding VAT)-Rs : 3,500.00 - 4,000.00
Supplying and fixing approved quality 63Amp/30mA three phase RCCB (Trip
Y-30 switch) to working order (Quality should be approved by the engineer) nr 6,807.00
Prime Cost of Product (excluding VAT)-Rs 4,200.00 - 4,700.00
Supplying and fixing approved quality Electrical Bell wired through a 5Amp Bell
switch using 2x1/1.13mm cu\pvc\pvc(1sq.mm) wires in fully concealed pvc
Y-31 nr 3,422.00
conduits or surface plastic casing and capping as directed. Rate shall include
switch,sun box,Bell,etc. (Quality should be approved by the engineer)
Supplying and fixing 1800mm long 50mm dia. (1.8 mm) GI earth pipe covered
by pits (internal size 450x450) depth up to 600mm with 75mm thick base in
1:3:6(25) con. 115mm Tk. Brick walls and rendering in 1:3 ct. sand mix including
Y-32 nr 6,433.00
forming channel and 50mm tk. removable con. cover in 1:2:4(20) con. reinfoced
with R6@75mm c/c both way and plastered all exposed surfaces with 1:3 ct. sand
mix as per drawing (Must be set to at least 10 ohms Resistance)
Supplying and fixing 1800mm long 50mm dia. (1.8 mm) GI earth pipe as
Y-32A nr 3,174.00
directed (only for repair works) Must be set to at least 10 ohms Resistance
Supplying and fixing 50x50x5.8 mm Angle Iron as directed and applying two
Y-33 m 2,745.00
coats of anti corrosive paint.
Supplying and fixing approved quality 7/1.04 Cu\PVC\PVC (T) - 6 sq.mm main
Y-34 m 522.00
wire as directed (concealing materials will be paid separately)
Supplying and fixing approved quality 7/0.85mm Cu\PVC (4 sq.mm) earth wire
Y-36A m 417.00
as directed (concealing materials will be paid separately)
Supplying and fixing approved quality 3/4"(20mm) PVC Conduite pipe with all
Y-39 m 121.00
specials. Rate shall include clips nails etc. ( only the additional cost)
Supplying and fixing approved quality 1"(25mm) PVC Conduite pipe with all
Y-40 m 140.00
specials. Rate shall include clips nails etc. ( only the additional cost)
Supplying and fixing approved quality 1 1/2"(40mm) PVC Conduite pipe with all
Y-40A m 261.00
specials. Rate shall include clips nails etc. ( only the additional cost)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 1"(25mm x 16mm) PVC casing with
Y-41 m 143.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 1 1/2"(40mm x 16mm) PVC casing with
Y-42 m 212.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 2" x 1" (50mm x 25mm) PVC casing with
Y-43 m 270.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 2" x 2" (50mm x 50mm) PVC casing with
Y-43A m 436.00
capping as directed. Rate shall include clips nails etc.( only the additional cost)
Supplying and fixing approved quality 4" x 2" (100mm x 50mm) PVC casing
Y-44 m 725.00
with capping as directed. Rate shall include clips nails etc.(only the additional cost)
Supplying and fixing approved quality 7W CFL Bulb (B22/E27) for the completed
Y-45 nr 480.00
wiring point. Bulb should fulfill following specification & approved by engineer.
Supplying and fixing approved quality 10W CFL Bulb (B22/E27) for the
Y-46 completed wiring point. Bulb should fulfill following specification & approved by nr 480.00
engineer.
Supplying and fixing approved quality 14W CFL Bulb (B22/E27) for the
Y-47 completed wiring point. Bulb should fulfill following specification & approved by nr 480.00
engineer.
Supplying and fixing approved quality18W CFL Bulb (B22/E27) for the
Y-48 completed wiring point. Bulb should fulfill following specification & approved by nr 590.00
engineer.
Supplying and fixing approved quality 3W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-49 nr 356.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 5W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-50 nr 461.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 7W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-51 nr 567.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality 9W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-52 nr 672.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality 12W LED Bulb (B22/E27) for the
completed wiring point according to the specification. Bulb should be 25000 hrs
life span or more and efficacy 90 lm/w or higher. Heat sink, noise filliter &
Y-53 nr 830.00
resettable resistor protection should be intergrated. complete product should be
branded with minimum 2 year warranty period & Without any Complaints of
ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 1 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-54 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 417.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 2 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-55 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 523.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 3 Gang One Way Switch
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-56 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 628.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative Universal Socket outlet
for the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-57 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 570.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
RATE FOR
ITEM DESCRIPTION UNIT
2019
Supplying and fixing approved quality Special decorative 1 Gang Two Way
Switch for the wiring point fulfill with specification. Switch should be big size
dolly with removeble frame. It should be made of Hihgly impact by polycarbonate
Y-58 with various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm nr 1,251.00
x 86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 13A Socket outlet for
the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-59 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 1,120.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Supplying and fixing approved quality Special decorative 15A Socket outlet for
the wiring point fulfill with specification. Switch should be big size dolly with
removeble frame. It should be made of Hihgly impact by polycarbonate with
Y-60 various colour range. Dimension of plate 85mm x 83mm, outer frame 88mm x nr 1,146.00
86mm, 24mm depth. Life of the switch 1500 cycle (30000 movement) or more.
complete product should be branded with life time warranty period & Without
any Complaints of ROHS. (Quality should be approved by engineer)
Z - MISCELLANEOUS WORK
Supplying and fixing approved quality PVC coated gauge 10 chain link fence as
Z-01 directed. Rate shall include necessary tension wires. Fence posts and horizontal m² 1,341.00
bars will be paid separately
Z-02 Supplying and fixing 2" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 1,229.00
Z-03 Supplying and fixing 2" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 1,289.00
Z-04 Supplying and fixing 2" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 692.00
Z-05 Supplying and fixing 1½" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 981.00
Supplying and fixing 1½" diameter G. I. Pipes (1.8mm thick: +/- 10%: ) as
Z-06 m 1,027.00
directed
Z-07 Supplying and fixing 1½" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 602.00
Z-08 Supplying and fixing 1¼" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 923.00
Z-09 Supplying and fixing 1¼" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 555.00
RATE FOR
ITEM DESCRIPTION UNIT
2019
Z-10 Supplying and fixing 1¼" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 529.00
Z-11 Supplying and fixing 1" diameter G. I. Pipes (2mm thick: +/- 10%) as directed m 663.00
Z-12 Supplying and fixing 1" diameter G. I. Pipes (1.8mm thick: +/- 10%) as directed m 690.00
Z-13 Supplying and fixing 1" diameter G. I. Pipes (1.5mm thick: +/- 10%) as directed m 461.00
Supplying and fixing approved quality barbed wires ( double strand, 12 S.W.G.
Z-14 with 4 points at 75mm centers) with necessary hooks and washers as directed m 70.00
(Quality should be approved by the engineer)
Supplying and fixing 1.80m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-15 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,553.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 1.95m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-16 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,580.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 2.10m high ( top 87.5x87.5mm and bottom 137.5x137.5mm)
Z-17 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 1,753.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 2.40m high ( top 87.5x87.5mm and bottom 150x150mm)
Z-18 concrete fence posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 2,212.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Supplying and fixing 3.15m high ( top 75x75mm and bottom 150x150mm)
concrete fence posts including 0.45m bend in 1:2:4(20mm) concrete reinforced
Z-19 nr 3,583.00
with 4R6 and R6 stirrups @ 150mm c/c. (Quality should be approved by the
engineer)
Supplying and fixing 1.80m high ( top 87.5x87.5mm and bottom 125x125mm)
Z-20 concrete support posts in 1:2:4(20mm) concrete reinforced with 4R6 and R6 nr 3,160.00
stirrups @ 150mm c/c. (Quality should be approved by the engineer)
Fabricating & fixing tag board, 12mm thick regidform placed on 12mm thick MDF
board and cover with approved colour velvet cloth by engineer .The board should
Z-21 be covered with 25x25mm natural anodized aluminum angle using brass screws m² 3,858.00
.Rate should be included two coat of enamel paint on both side and arrangement
for hang
DISTANCE CEMENT
BRICK CEMENT SAND METAL RUBBLE SOIL
(km) BLOCK
1 1,200.00 38.00 212.00 265.00 265.00 212.00 1,200.00
2 1,255.00 41.68 238.91 293.82 293.82 238.55 1,255.00
3 1,310.00 45.36 265.82 322.64 322.64 265.10 1,310.00
4 1,365.00 49.04 292.73 351.46 351.46 291.65 1,365.00
5 1,420.00 52.72 319.64 380.28 380.28 318.20 1,420.00
6 1,475.00 56.40 346.55 409.10 409.10 344.75 1,475.00
7 1,530.00 60.08 373.46 437.92 437.92 371.30 1,530.00
8 1,585.00 63.76 400.37 466.74 466.74 397.85 1,585.00
9 1,640.00 67.44 427.28 495.56 495.56 424.40 1,640.00
10 1,695.00 71.12 454.19 524.38 524.38 450.95 1,695.00
11 1,744.10 73.76 478.99 551.11 551.11 475.58 1,744.10
12 1,793.20 76.40 503.79 577.84 577.84 500.21 1,793.20
13 1,842.30 79.04 528.59 604.57 604.57 524.84 1,842.30
14 1,891.40 81.68 553.39 631.30 631.30 549.47 1,891.40
15 1,940.50 84.32 578.19 658.03 658.03 574.10 1,940.50
16 1,989.60 86.96 602.99 684.76 684.76 598.73 1,989.60
17 2,038.70 89.60 627.79 711.49 711.49 623.36 2,038.70
18 2,087.80 92.24 652.59 738.22 738.22 647.99 2,087.80
19 2,136.90 94.88 677.39 764.95 764.95 672.62 2,136.90
20 2,186.00 97.52 702.19 791.68 791.68 697.25 2,186.00
21 2,235.10 100.16 726.99 818.41 818.41 721.88 2,235.10
22 2,284.20 102.80 751.79 845.14 845.14 746.51 2,284.20
23 2,333.30 105.44 776.59 871.87 871.87 771.14 2,333.30
24 2,382.40 108.08 801.39 898.60 898.60 795.77 2,382.40
25 2,431.50 110.72 826.19 925.33 925.33 820.40 2,431.50
26 2,480.60 113.36 850.99 952.06 952.06 845.03 2,480.60
27 2,529.70 116.00 875.79 978.79 978.79 869.66 2,529.70
28 2,578.80 118.64 900.59 1,005.52 1,005.52 894.29 2,578.80
29 2,627.90 121.28 925.39 1,032.25 1,032.25 918.92 2,627.90
30 2,677.00 123.92 950.19 1,058.98 1,058.98 943.55 2,677.00
31 2,726.10 126.56 974.99 1,085.71 1,085.71 968.18 2,726.10
DISTANCE CEMENT
BRICK CEMENT SAND METAL RUBBLE SOIL
(km) BLOCK
1 1,150.00 35.00 424.00 424.00 424.00 424.00 1,485.00
2 1,260.00 42.50 466.00 466.00 466.00 466.00 1,605.00
3 1,370.00 50.00 508.00 508.00 508.00 508.00 1,725.00
4 1,480.00 57.50 550.00 550.00 550.00 550.00 1,845.00
5 1,590.00 65.00 592.00 592.00 592.00 592.00 1,965.00
6 1,700.00 72.50 634.00 634.00 634.00 634.00 2,085.00
7 1,810.00 80.00 676.00 676.00 676.00 676.00 2,205.00
8 1,920.00 87.50 718.00 718.00 718.00 718.00 2,325.00
9 2,030.00 95.00 760.00 760.00 760.00 760.00 2,445.00
10 2,140.00 102.50 802.00 802.00 802.00 802.00 2,565.00
11 2,235.00 108.50 840.00 840.00 840.00 840.00 2,675.00
12 2,330.00 114.50 878.00 878.00 878.00 878.00 2,785.00
13 2,425.00 120.50 916.00 916.00 916.00 916.00 2,895.00
14 2,520.00 126.50 954.00 954.00 954.00 954.00 3,005.00
15 2,615.00 132.50 992.00 992.00 992.00 992.00 3,115.00
16 2,710.00 138.50 1,030.00 1,030.00 1,030.00 1,030.00 3,225.00
17 2,805.00 144.50 1,068.00 1,068.00 1,068.00 1,068.00 3,335.00
18 2,900.00 150.50 1,106.00 1,106.00 1,106.00 1,106.00 3,445.00
19 2,995.00 156.50 1,144.00 1,144.00 1,144.00 1,144.00 3,555.00
20 3,090.00 162.50 1,182.00 1,182.00 1,182.00 1,182.00 3,665.00
21 3,185.00 168.50 1,220.00 1,220.00 1,220.00 1,220.00 3,775.00
22 3,280.00 174.50 1,258.00 1,258.00 1,258.00 1,258.00 3,885.00
23 3,375.00 180.50 1,296.00 1,296.00 1,296.00 1,296.00 3,995.00
24 3,470.00 186.50 1,334.00 1,334.00 1,334.00 1,334.00 4,105.00
25 3,565.00 192.50 1,372.00 1,372.00 1,372.00 1,372.00 4,215.00
26 3,660.00 198.50 1,410.00 1,410.00 1,410.00 1,410.00 4,325.00
27 3,755.00 204.50 1,448.00 1,448.00 1,448.00 1,448.00 4,435.00
28 3,850.00 210.50 1,486.00 1,486.00 1,486.00 1,486.00 4,545.00
29 3,945.00 216.50 1,524.00 1,524.00 1,524.00 1,524.00 4,655.00
30 4,040.00 222.50 1,562.00 1,562.00 1,562.00 1,562.00 4,765.00
31 4,135.00 228.50 1,600.00 1,600.00 1,600.00 1,600.00 4,875.00
32 4,230.00 234.50 1,638.00 1,638.00 1,638.00 1,638.00 4,985.00
P A H Sanjaya - Member
Technical Assistant (Electrical)
A P Abeykoon - Member
Architect
Page 160