Вы находитесь на странице: 1из 1

13.10.

2011, Ja,
114159200300-95421672S TK 11229/11-03
ASLH-D(S)bb 48 NZDSF (AL4 108 - 18,9)

Optical Ground Wire (OPGW) according to EN 60794-4 standards

 Stranding direction of outer layer: right hand (Z-stranding)


 AA-Wires acc. to EN 50183, Type AL4 resp. IEC 60104, Type A
 Stainless steel tube material: DIN EN 10088-02, Mat. No. 1.4404
 Fibres coloured acc. to colour code system 048 F SEC
 Fibres acc. to G.655

Configuration
Center 1 Stainless Steel Tube 3,50 / 4,10 mm
with 48 NZDSF
Layer 1 8 AL4 - Wires 2,50 mm
Layer 2 14 AL4 - Wires 2,50 mm

Mechanical Data
Cable Diameter 14,1 mm
Cable Weight 346 kg/km
Supporting Cross Section 108,0 mm²
Rated Tensile Strength (RTS) 35,1 kN
Ratio RTS / Cable Weight 10,3 km
Modulus of Elasticity 57,0 kN/mm²
-6
Thermal Elongation Coefficient 23,0 10 /K
Permissible Maximum Working Stress (42% RTS) 136,5 N/mm² (14,7kN)
Recommended Everyday Stress (16% RTS) 52,0 N/mm² (5,6kN)
Ultimate Exceptional Stress (72% RTS) 234,0 N/mm² (25,3kN)

Electrical Data
DC Resistance (20°C) 0,311 /km
Conductivity 51,3% IACS
Short Time Current (0,3s, 50-200°C) 18,9 kA

Data for Sag-Tension-Software


Cross Section Area 108,0 mm² Unit Weigt 3,398 N/m
Outside Diameter 14,1 mm Ultimate Tension 35097 N
For PLS-CADD:
Final Modulus of Elasticity 600,0 Mpa/100
Thermal Expansion Coefficient 0,00230 /100°C
Polynominal coefficients (strand data obtained at 24°C; strains [%], stresses [Mpa] )
PG_OAC A1 A2 A3 A4
Stress-strain
-4,5698 311,4542 1028,2568 -2082,0518 1136,8906
C0 C1 C2 C3 C4
Creep
-0,2854 132,0022 1161,7531 -2217,0236 1217,5386

For SAG10:
SAG10-Chart No. 1-1068

Application
Maximum Permissible Installation Force 10,5 kN
Minimum Bending Radius static 176 mm
dynamic 212 mm
Normal Delivery Length 4000 m
Temperature Range Installation -10 to +50°C
Transportation and Operation -40 to +80°C

www.afltele.com AFL Telecommunications GmbH

Вам также может понравиться