Академический Документы
Профессиональный Документы
Культура Документы
www.litostrojpower.com
Compact design, factory preassembled parts and excellent operating
characteristics of LitoBulb turbine with runner diameter up to 3 m.
LitoBulb is a small, compact design horizontal or inclined-shaft bulb unit. Main preassembled LitoBulb parts are bulb
cap, generator stator with generator rotor, the stay ring, the conical distributor and the runner chamber. Inside the runner
chamber, a three or four blade Kaplan runner is installed. The hydraulic torque from the runner is directly transmitted
via a rigid coupling to a compact synchronous generator. Due to its compact design and factory preassembled parts the
LitoBulb units have the benefits of simple and short site assembly.
Application range
• head up to 12 m
• discharge up to 100 m3/s
• runner diameter from 2 to 3 m
• output up to 9 MW
7 MW 9 MW
5 MW
100
4 MW
3 MW
2 MW
1,5 MW
1 MW
0,8 MW
0,6 MW
0,4 MW
LitoBulb
0,2 MW
Discharge [m3/s]
10
Advantages
For applications with runner diameters below 3m, the LitoBulb design has many
advantages compared to a classic bulb turbine:
• Sophisticated design
LitoBulb unit is designed to be compact and reliable throughout its entire lifecycle –
from manufacture to long term operation.
1
1 10 • Fast installation
Head [m] Installation of the LitoBulb unit is fast and relatively simple: Many sub-assemblies
are factory pre-assembled to allow simplified site installation.
• Simple maintenance
All vital parts of the turbine (bearings, shaft seal, and oil distributor) are accessible
for maintenance.
• Eco-friendly
The reduced amount of lubricants makes the LitoBulb units environmentally-friendly.
Oil free - Ecological runner is available. Fish Friendly.
Compact Generator
Compact design Synchronous Generator, Salient poles rotor with Brushless exciter.
Resin Rich insulating system, class F/H. Air-to-air or water-to-air cooled.
Excitation control, protection, metering and synchronizing systems on request.
LITOSTROJ POWER LITOSTROJ POWER LITOSTROJ POWER LITOSTROJ POWER LITOSTROJ POWER
Litostroj Power Litostroj Hydro Cairo Office ČKD Blansko Engineering Hydraulic Research Center Blansko
Litostrojska cesta 50, 1000 Ljubljana 45, Pacifique Est 47, Ramses Street Čapkova 2357/5, 678 01 Blansko Horní Lhota 149
Slovenia Bromont (Quebec) P.O. Box 2370, Floor 2 The Czech Republic The Czech Republic
Tel: +386 1 5824 102 Canada, J2L 1 J4 Cairo, Egypt Tel: +420 533 309 560 678 01 Blansko
Fax: +386 1 5824 171 Tel: +1450 534 2929 Tel: + 202 2575 39 75 Fax: +420 533 309 557 Tel.: +420 515 538 580
E-mail: info@litostrojpower.eu Fax: + 1450 534 0136 Fax: + 202 2575 35 36 E-mail: info@cbeng.cz Fax: +420 515 538 598
www.litostrojpower.com E-mail: info@litohydro.ca E-mail: ltostroj@internetegypt.net www.cbe.eu E-mail: laboratory@cbeng.cz